SOLVED - MX23.3 KDE - Lost audio after updating

Help for Current Versions of MX
When asking for help, use Quick System Info from MX Tools. It will be properly formatted using the following steps.
1. Click on Quick System Info in MX Tools
2. Right click in your post and paste.
Forum rules
Post Reply
Message
Author
grelos
Posts: 76
Joined: Wed Mar 28, 2018 3:12 pm

SOLVED - MX23.3 KDE - Lost audio after updating

#1 Post by grelos »

System info:

Code: Select all

[CODE]System:
  Kernel: 6.1.0-23-amd64 [6.1.99-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/vmlinuz-6.1.0-23-amd64 root=UUID=<filter> ro quiet splash
  Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23.3_KDE_x64 Libretto May
    19 2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Desktop Mobo: ASRock model: A300M-STX serial: <superuser required>
    UEFI: American Megatrends v: P3.60 date: 10/28/2019
CPU:
  Info: model: AMD Ryzen 5 3400G with Radeon Vega Graphics bits: 64 type: MT MCP arch: Zen/Zen+
    note: check gen: 1 level: v3 note: check built: 2019 process: GF 12nm family: 0x17 (23)
    model-id: 0x18 (24) stepping: 1 microcode: 0x8108102
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 384 KiB
    desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1400 min/max: 1400/3700 boost: enabled scaling: driver: acpi-cpufreq
    governor: ondemand cores: 1: 1400 2: 1400 3: 1400 4: 1400 5: 1400 6: 1400 7: 1400 8: 1400
    bogomips: 59198
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_rstack_overflow mitigation: safe RET
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; STIBP: disabled; RSB filling;
    PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Mobile Series] driver: amdgpu
    v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s
    lanes: 16 ports: active: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 05:00.0 chip-ID: 1002:15d8
    class-ID: 0300 temp: 46.0 C
  Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
    loaded: amdgpu unloaded: fbdev,modesetting,radeon,vesa dri: radeonsi gpu: amdgpu display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: Acer SA270 serial: <filter> built: 2021
    res: 1920x1080 hz: 75 dpi: 82 gamma: 1.2 size: 598x336mm (23.54x13.23") diag: 686mm (27")
    ratio: 16:9 modes: max: 1920x1080 min: 720x400
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: AMD Radeon Vega 11 Graphics (raven LLVM
    15.0.6 DRM 3.49 6.1.0-23-amd64) direct-render: Yes
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 05:00.1 chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: ASRock driver: snd_hda_intel v: kernel pcie:
    gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 05:00.6 chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.1.0-23-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel modules: wl pcie: gen: 2 speed: 5 GT/s
    lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock driver: r8169
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eth0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-3.1:8 chip-ID: 8087:0029
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 2090 hci-v: 5.2 rev: 2090
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 8.64 TiB used: 111.62 GiB (1.3%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SA2000M8250G size: 232.89 GiB
    block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: S5Z42105 temp: 39.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Kingston model: SA2000M8250G size: 232.89 GiB
    block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: S5Z42105 temp: 43.9 C scheme: GPT
  ID-3: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWL120 size: 1.82 TiB block-size:
    physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 0A
    scheme: GPT
  ID-4: /dev/sdb maj-min: 8:16 type: USB vendor: Seagate model: Expansion size: 3.64 TiB
    block-size: physical: 4096 B logical: 512 B type: N/A serial: <filter> rev: 0712 scheme: GPT
  ID-5: /dev/sdc maj-min: 8:32 vendor: Toshiba model: MQ04ABF100 size: 931.51 GiB block-size:
    physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 2E
    scheme: GPT
  ID-6: /dev/sdd maj-min: 8:48 type: USB vendor: Seagate model: ST2000LM015-2E8174 size: 1.82 TiB
    block-size: physical: 4096 B logical: 512 B type: HDD rpm: 5400 serial: <filter> rev: 2501
    scheme: GPT
Partition:
  ID-1: / raw-size: 231.62 GiB size: 226.92 GiB (97.97%) used: 111.35 GiB (49.1%) fs: ext4
    dev: /dev/dm-0 maj-min: 253:0 mapped: luks-<filter>
  ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 278.9 MiB (28.7%) fs: ext4
    dev: /dev/nvme1n1p2 maj-min: 259:6
  ID-3: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/nvme1n1p1 maj-min: 259:5
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 5 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 45.2 C mobo: N/A gpu: amdgpu temp: 45.0 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2608 libs: 1385 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
    pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/megasync.list
    1: deb [signed-by=/usr/share/keyrings/meganz-archive-keyring.gpg] https://mega.nz/linux/repo/Debian_12/ ./
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://nl.mxrepo.com/mx/repo/ bookworm main non-free
    2: deb http://nl.mxrepo.com/mx/repo/ bookworm ahs
Info:
  Processes: 277 Uptime: 5m wakeups: 1 Memory: 21.43 GiB used: 1.48 GiB (6.9%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
[/code]

Upon booting audio is disabled:

https://i.imgur.com/Qj0KAjH.png

When going into PulseAudio settings I see this:

https://i.imgur.com/TwpKxnf.png

The Family17h/19h is my audio controller. In the past it happened already that audio was disabled at start-up, however another reboot fixed it.
Now, when I try to change the Audio Controller Profile (see last screenshot) I see:
- Analog Stereo Duplex (unavailable)
- Analog Stero Output (unplugged) (unavailable)

I played a bit with these settings at no avail.

Any idea how to debug it? Actually this is a major issue for me, if I can't find a way to fix it I need to change distro which is something I am really not happy about.

Thanks.
Last edited by grelos on Fri Jul 26, 2024 9:15 am, edited 1 time in total.
MX-19 on Lenovo 520-15IKB
Top
grelos
Posts: 76
Joined: Wed Mar 28, 2018 3:12 pm

Re: MX23.3 KDE - Lost audio after updating

#2 Post by grelos »

here more details on the audio controller:

Code: Select all

05:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller
        Subsystem: ASRock Incorporation Family 17h/19h HD Audio Controller
        Flags: bus master, fast devsel, latency 0, IRQ 105, IOMMU group 14
        Memory at fca80000 (32-bit, non-prefetchable) [size=32K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel
MX-19 on Lenovo 520-15IKB
Top
User avatar
j2mcgreg
Global Moderator
Posts: 6620
Joined: Tue Oct 23, 2007 12:04 pm

Re: MX23.3 KDE - Lost audio after updating

#3 Post by j2mcgreg »

Use MXPI to install one of the available Liquorix kernels. There's ample evidence here in the forums that many issues including audio problems can be solved by using a Liquorix kernel with Ryzen based systems.
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.
Top
User avatar
dolphin_oracle
Developer
Posts: 22074
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX23.3 KDE - Lost audio after updating

#4 Post by dolphin_oracle »

first check to see if only one instance of wireplumber is running.

Code: Select all

ps -aux |grep wireplumber |grep -v grep
you should also be able to roll back to the 6.1.0-22 kernel. we haven't updated pipewire, so kernel driver is a good place to start, and unless you've removed it, -22 should still be installed.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
asinoro
Posts: 173
Joined: Mon Feb 22, 2016 11:26 am

Re: MX23.3 KDE - Lost audio after updating

#5 Post by asinoro »

If another kernel does not help, boot from systemd and check!
2: deb http://nl.mxrepo.com/mx/repo/ bookworm ahs
Info:
Processes: 277 Uptime: 5m wakeups: 1 Memory: 21.43 GiB used: 1.48 GiB (6.9%) Init: SysVinit
If your case is solved, and you want to help other users, click on the Solved-Button on the top right of a user's post.

Don't forget a system backup!
Top
grelos
Posts: 76
Joined: Wed Mar 28, 2018 3:12 pm

Re: MX23.3 KDE - Lost audio after updating

#6 Post by grelos »

rolling back fixed it. Thanks.
MX-19 on Lenovo 520-15IKB
Top
Post Reply

Return to “MX Help”