inxi not showing correct cpu frequency

Message
Author
Frankarnold
Posts: 23
Joined: Wed Jun 21, 2023 7:56 am

inxi not showing correct cpu frequency

#1 Post by Frankarnold »

Min/Max should be 800/2800 ...

Code: Select all

System:
  Kernel: 6.9.5-1-liquorix-amd64 [6.9-4~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable BOOT_IMAGE=/boot/vmlinuz-6.9.5-1-liquorix-amd64 root=UUID=<filter> ro
    quiet splash init=/lib/systemd/systemd
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.3_ahs_x64 Libretto May 19  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: VALE product: Notebook Slim S132 v: N/A serial: <superuser required>
  Mobo: VA_inet model: GMLR_V11 serial: <superuser required> UEFI: American Megatrends
    v: S132CGMLR_3.0.5 date: 01/13/2022
Battery:
  ID-1: BAT0 charge: 27.0 Wh (74.0%) condition: 36.5/36.5 Wh (100.0%) volts: 7.6 min: N/A
    model: N/A type: Unknown serial: <filter> status: discharging
CPU:
  Info: model: Intel Celeron N4020 bits: 64 type: MCP arch: Goldmont Plus level: v2 built: 2017
    process: Intel 14nm family: 6 model-id: 0x7A (122) stepping: 8 microcode: 0x22
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 112 KiB desc: d-2x24 KiB; i-2x32 KiB
    L2: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1791 min/max: 800/1101 boost: enabled scaling: driver: acpi-cpufreq
    governor: ondemand cores: 1: 1791 2: 1791 bogomips: 4377
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Vulnerable: No microcode
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB: conditional; RSB filling;
    PBRSB-eIBRS: Not affected; BHI: SW loop, KVM: SW loop
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel GeminiLake [UHD Graphics 600] driver: i915 v: kernel arch: Gen-9
    process: Intel 14n built: 2015-16 ports: active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0
    chip-ID: 8086:3185 class-ID: 0300
  Device-2: USB Camera type: USB driver: uvcvideo bus-ID: 1-7:4 chip-ID: 32e6:9005 class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: BOE Display 0x06fa built: 2022 res: 1920x1080 hz: 60 dpi: 166
    gamma: 1.2 size: 294x165mm (11.57x6.5") diag: 337mm (13.3") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel UHD Graphics 600 (GLK 2)
    direct-render: Yes
Audio:
  Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio
    driver: sof-audio-pci-intel-apl alternate: snd_hda_intel, snd_soc_skl, snd_soc_avs,
    snd_sof_pci_intel_apl bus-ID: 00:0e.0 chip-ID: 8086:3198 class-ID: 0401
  API: ALSA v: k6.9.5-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.7 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter driver: rtw_8821ce v: N/A
    modules: rtw88_8821ce,wl,rtl8821ce pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000
    bus-ID: 01:00.0 chip-ID: 10ec:c821 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:3 chip-ID: 0bda:c821
    class-ID: e001 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: f098 hci-v: 4.2 rev: 75b8
  Info: acl-mtu: 1021:8 sco-mtu: 255:12 link-policy: rswitch hold sniff park
    link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony
Drives:
  Local Storage: total: 340.04 GiB used: 10.34 GiB (3.0%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 type: Removable vendor: Generic model: SCA128
    size: 116.47 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 0x8
    scheme: GPT
  SMART Message: Unknown smartctl error. Unable to generate data.
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-2: /dev/sda maj-min: 8:0 vendor: Transcend model: TS240GMTS420S size: 223.57 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 1A0 scheme: GPT
Partition:
  ID-1: / raw-size: 107.44 GiB size: 105.19 GiB (97.91%) used: 10.31 GiB (9.8%) fs: ext4
    dev: /dev/sda4 maj-min: 8:4
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 26.7 MiB (27.8%) fs: vfat
    dev: /dev/mmcblk0p1 maj-min: 179:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 62.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2128 libs: 1054 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
    2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm ahs
Info:
  Processes: 296 Uptime: 4m wakeups: 1 Memory: 3.67 GiB used: 2.2 GiB (59.8%) Init: systemd v: 252
  target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

User avatar
j2mcgreg
Global Moderator
Posts: 6872
Joined: Tue Oct 23, 2007 12:04 pm

Re: inxi not showing correct cpu frequency

#2 Post by j2mcgreg »

Some people have been getting funky results with the Liquorix 6.9.xxx series. As a test, roll back to the 6.6.12-1 which has proven to be very stable and post install rerun the QSI.
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.

Post Reply

Return to “Hardware /Configuration”