MX Linux il Bluetooth e wirwless si collegano ma non si sente (SOLVED)

[Ernesto Rossi]

Ho provato a collegare delle cuffie AUDEZE Penrose, il wireless si collega ma non si sente, mentre il bluetooth si è attivato una prima volta e dopo si è collegato sempre ma non si sente. Anzi non si sente più, tramite bluetooth, più alcun altro dispositivo. Ho riavviato eccetera... Ma niente, si collega ma non si sente più con tutti i dispositivi. Ora pubblico i requisiti di sistema.

[Ernesto Rossi]

Code: Select all

System:
  Kernel: 6.7.11-1-liquorix-amd64 [6.7-17~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable rcupdate.rcu_expedited=1 BOOT_IMAGE=/boot/vmlinuz-6.7.11-1-liquorix-amd64
    root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.2_ahs_x64 Libretto October 15  2023 base: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: Laptop System: CHUWI Innovation And (ShenZhen) product: LarkBox X v: N/A
    serial: <superuser required>
  Mobo: CHUWI Innovation And (ShenZhen) model: LarkBox X serial: <superuser required>
    UEFI: American Megatrends LLC. v: DNB19B V0.02 date: 09/21/2023
CPU:
  Info: model: Intel N100 bits: 64 type: MCP arch: Alder Lake level: v3 note: check built: 2021+
    process: Intel 7 (10nm ESF) family: 6 model-id: 0xBE (190) stepping: 0 microcode: 0x12
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB
    L2: 2 MiB desc: 1x2 MiB L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 700 min/max: 700/801 boost: enabled scaling: driver: acpi-cpufreq
    governor: ondemand cores: 1: 700 2: 700 3: 700 4: 700 bogomips: 6451
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Vulnerable: No microcode
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Alder Lake-N [UHD Graphics] vendor: IP3 Tech driver: i915 v: kernel
    arch: Gen-12.2 process: Intel 10nm built: 2021-22+ ports: active: HDMI-A-1 empty: DP-1,DP-2,DP-3
    bus-ID: 00:02.0 chip-ID: 8086:46d1 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: HP M27f FHD serial: <filter> built: 2022
    res: 1920x1080 hz: 60 dpi: 82 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
    ratio: 16:9 modes: max: 1920x1080 min: 720x400
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel Graphics (ADL-N)
    direct-render: Yes
Audio:
  Device-1: Intel vendor: Conexant Systems driver: snd_hda_intel v: kernel
    alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:54c8 class-ID: 0401
  API: ALSA v: k6.7.11-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel driver: iwlwifi v: kernel modules: wl port: N/A bus-ID: 00:14.3
    chip-ID: 8086:54f0 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 v: kernel pcie:
    speed: Unknown lanes: 63 link-max: gen: 6 speed: 64 GT/s port: 4000 bus-ID: 01:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-3: Realtek RTL8125 2.5GbE driver: r8169 v: kernel pcie: speed: Unknown lanes: 63
    link-max: gen: 6 speed: 64 GT/s port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8125 class-ID: 0200
  IF: eth1 state: down mac: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-10:4 chip-ID: 8087:0026
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 367b hci-v: 5.2 rev: 367b
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 476.94 GiB used: 113.51 GiB (23.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 model: AirDisk 512GB SSD size: 476.94 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 546 scheme: GPT
Partition:
  ID-1: / raw-size: 476.69 GiB size: 468.13 GiB (98.21%) used: 113.51 GiB (24.2%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 49.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2241 libs: 1148 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://it.mxrepo.com/mx/repo/ bookworm main non-free
    2: deb http://it.mxrepo.com/mx/repo/ bookworm ahs
Info:
  Processes: 291 Uptime: 27m wakeups: 2 Memory: 11.44 GiB used: 2.05 GiB (17.9%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

[Charlie Brown]

viewtopic.php?p=759481#p759481

viewtopic.php?p=759378#p759378

[Eadwine Rose]

viewtopic.php?p=759481#p759481

viewtopic.php?p=759378#p759378

E la soluzione è? L'ultima volta: solo nessun link (no links only)

[Ernesto Rossi]

Charlie Brown sei sempre tanto pronto quanto gentile. Purtroppo mi sono sbagliato, ovvero vi è stato un momento in cui tra fili e dongle e bluetooth e wifi, non ci ho capito più niente. L'automatismo mentale della Mint ha fatto il resto... Praticamente funziona tutto, solo che mi ero dimenticato di selezionare il dispositivo dalla barra, agendo sul simbolo del suono. MX Linux funziona così e me ne ero dimenticato, per cui funziona anche il wireless e anche tutti gli altri disposotivi. Ora metto "risolto" e grazie Charlie Brown, grazie ancora e scusami tanto... E' un primo periodo e sono letteralmente sbandato, ho conosciuto solo Linux Mint e non ho avuto dual-boot di sorta, MX Linux è uguale ma differente e devo farci l'abitudine.