Blog page problem [Solved]

[chrispop99]

When viewing the latest Blog page and attempting to step back to earlier ones, it fails with an 'Oops! That page can't be found' message.

Chris

[Jerry3904]

Not sure how you are doing that "step back" part. I clicked on the latest Blog, then clicked "News" on the top menu bar and could navigate to any one I wanted from the list. It also worked if I went back to the home page and clicked the earlier one.

[chrispop99]

Not sure how you are doing that "step back" part. I clicked on the latest Blog, then clicked "News" on the top menu bar and could navigate to any one I wanted from the list. It also worked if I went back to the home page and clicked the earlier one.

I used the 'Next' link, and the number links, at the bottom of the page.

Chris

[Jerry3904]

Thanks.

Let's flag @peregrine about this.

[chrispop99]

In the event that this is specific to me, QSI:

Code: Select all

System:    Kernel: 6.0.0-6mx-amd64 [6.0.12-1~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-6.0.0-6mx-amd64 root=UUID=<filter> ro quiet 
           Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7 
           dm: LightDM 1.26.0 Distro: MX-21.3_ahs_x64 Wildflower January 15  2023 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop Mobo: ASUSTeK model: PRIME Z390-P v: Rev X.0x serial: <filter> 
           UEFI: American Megatrends v: 2606 date: 10/24/2019 
CPU:       Info: 6-Core model: Intel Core i5-9400 bits: 64 type: MCP arch: Kaby Lake note: check 
           family: 6 model-id: 9E (158) stepping: D (13) microcode: FA cache: L2: 9 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 34798 
           Speed: 2900 MHz min/max: 800/4100 MHz Core speeds (MHz): 1: 2900 2: 2900 3: 1300 
           4: 2646 5: 2900 6: 2900 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled 
           Type: retbleed mitigation: Enhanced IBRS 
           Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 
           mitigation: Enhanced IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: SW sequence 
           Type: srbds mitigation: Microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel CoffeeLake-S GT2 [UHD Graphics 630] vendor: ASUSTeK driver: i915 
           v: kernel bus-ID: 00:02.0 chip-ID: 8086:3e98 class-ID: 0300 
           Display: x11 server: X.Org 1.20.14 compositor: xfwm4 v: 4.18.0 driver: loaded: intel 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0") 
           s-diag: 777mm (30.6") 
           Monitor-1: DP1 res: 2560x1440 hz: 60 dpi: 108 size: 600x340mm (23.6x13.4") 
           diag: 690mm (27.2") 
           OpenGL: renderer: Mesa Intel UHD Graphics 630 (CFL GT2) v: 4.6 Mesa 22.0.5 
           direct render: Yes 
Audio:     Device-1: Intel Cannon Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel v: kernel 
           alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3 chip-ID: 8086:a348 
           class-ID: 0403 
           Sound Server-1: ALSA v: k6.0.0-6mx-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel port: 3000 bus-ID: 03:00.0 
           chip-ID: 10ec:8168 class-ID: 0200 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 1.14 TiB used: 671.36 GiB (57.7%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 250GB 
           size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 
           type: SSD serial: <filter> rev: 2B2QEXM7 temp: 37.9 C scheme: GPT 
           ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital model: WDS100T2G0A-00JH30 
           size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD 
           serial: <filter> rev: 0400 scheme: MBR 
Partition: ID-1: / raw-size: 224.63 GiB size: 220.04 GiB (97.96%) used: 67.67 GiB (30.8%) fs: ext4 
           dev: /dev/nvme0n1p2 maj-min: 259:2 
           ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 282 KiB (0.1%) fs: vfat 
           dev: /dev/nvme0n1p1 maj-min: 259:1 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 
           dev: /dev/nvme0n1p3 maj-min: 259:3 
Sensors:   System Temperatures: cpu: 27.8 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2452 lib: 1309 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list 
           1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb https://mirrors.ukfast.co.uk/sites/MX_antiX_packages/mx/repo/ bullseye main non-free
           2: deb https://mirrors.ukfast.co.uk/sites/MX_antiX_packages/mx/repo/ bullseye ahs
Info:      Processes: 240 Uptime: 27m wakeups: 1 Memory: 7.61 GiB used: 3.17 GiB (41.7%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: N/A 
           alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06 
Boot Mode: UEFI

Firefox version is 125.0.
Problem persists when starting FF in safe mode.
Problem happens when using FF ESR.

Chris

[Jerry3904]

I use Vivaldi as my daily web browser, and that "Next <arrow>" link works as expected. It is Chromium-based, unlike Firefox, so maybe the difference between our experiences lies under the hood.

Do the child links on the top bar work for you, e.g. Repos > Overview?

EDIT: those links work here on FF 125.

[chrispop99]

Do the child links on the top bar work for you, e.g. Repos > Overview?

EDIT: those links work here on FF 125.

Yes, they work.

Chris

[CharlesV]

Just an fyi - MX21.3 and ff 125 here and all work ok.

[chrispop99]

If I go directly to the blog from my bookmark and click the '2' link for the next page, it tries to go to:

https://mxlinux.org/blog/page/2/

but if I use the 'News' link at the top of the page, then select the '2' link, it directs correctly to:

https://mxlinux.org/mx-linux-blog/page/2/

so it looks like something changed since I bookmarked the blog. I have updated my bookmark, and all works now as it should.

Chris

[Jerry3904]

Good!