MX-23.1 // Problems with Standby Mode

Forum rules
Post Reply
Message
Author
User avatar
AlphaElwedritsch
Posts: 54
Joined: Fri Apr 28, 2023 5:49 am

MX-23.1 // Problems with Standby Mode

#1 Post by AlphaElwedritsch »

Hello,
since 23.1 I have problems with my two Laptops and Standby mode
I've configured on both to go in standby after 15 minutes in battery mode.
And to go in standby when closing the lid.

If I wait 15 minutes, everything is fine as expected. Laptops going in standby. After pressing power button, the wake up, asking for password and working well.

If I close the lid, they going in standby. But when opening the lid, I don't get ask for password. Desktop is showing, but mouse and keyboard don't working.
And I get an blue/yellow icon in sidebar, which I don't know what it is.
The only possibility and the only thing what is working is to press STRG+ALT+DEL to end session

It's the same setup I use for long time on the laptops without issues.

One laptop is std. MX, the other is ahs. But same behaviour on both.

https://imagebin.ca/v/7fsDoRpaYdjD

Can somebody help?

thx, regards Alpha

Code: Select all

System:
  Kernel: 6.5.0-1mx-ahs-amd64 [6.5.3-1~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.5.0-1mx-ahs-amd64 root=UUID=<filter> ro quiet splash
    mem_sleep_default=deep resume=UUID=<filter> resume_offset=3952640
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.1_ahs_x64 Libretto October 15  2023 base: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: Laptop System: HP product: HP EliteBook 850 G6 v: N/A serial: <superuser required> Chassis:
    type: 10 serial: <superuser required>
  Mobo: HP model: 8549 v: KBC Version 52.6F.00 serial: <superuser required> UEFI: HP
    v: R70 Ver. 01.25.00 date: 06/26/2023
Battery:
  ID-1: BAT0 charge: 18.7 Wh (46.2%) condition: 40.5/56.3 Wh (72.0%) volts: 11.0 min: 11.6
    model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: discharging cycles: 103
CPU:
  Info: model: Intel Core i7-8565U bits: 64 type: MT MCP arch: Comet/Whiskey Lake note: check
    gen: core 8 level: v3 note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142)
    stepping: 0xC (12) microcode: 0xF8
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 508 high: 868 min/max: 400/4600 scaling: driver: intel_pstate
    governor: powersave cores: 1: 400 2: 800 3: 400 4: 400 5: 400 6: 400 7: 400 8: 868
    bogomips: 31999
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: retbleed mitigation: Enhanced IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional, RSB filling,
    PBRSB-eIBRS: SW sequence
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Hewlett-Packard driver: i915
    v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: DP-1,
    DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:3ea0 class-ID: 0300
  Device-2: Quanta HP HD Camera type: USB driver: uvcvideo bus-ID: 1-9:3 chip-ID: 0408:5343
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: AU Optronics 0x21ed built: 2018 res: 1920x1080 hz: 60 dpi: 142
    gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel UHD Graphics 620 (WHL GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Cannon Point-LP High Definition Audio vendor: Hewlett-Packard
    driver: sof-audio-pci-intel-cnl alternate: snd_hda_intel, snd_soc_skl, snd_sof_pci_intel_cnl
    bus-ID: 00:1f.3 chip-ID: 8086:9dc8 class-ID: 0401
  API: ALSA v: k6.5.0-1mx-ahs-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I219-V vendor: Hewlett-Packard driver: e1000e v: kernel port: N/A
    bus-ID: 00:1f.6 chip-ID: 8086:15be class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel modules: wl pcie: gen: 2 speed: 5 GT/s
    lanes: 1 bus-ID: 3b:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  IF-ID-1: wwan0 state: down mac: N/A
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-10:5 chip-ID: 8087:0029
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 5 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 2090 hci-v: 5.2 rev: 2090
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 476.94 GiB used: 47.58 GiB (10.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLQ512HALU-000H1 size: 476.94 GiB
    block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: HPS4NFXV temp: 14.8 C scheme: GPT
Partition:
  ID-1: / raw-size: 476.69 GiB size: 468.13 GiB (98.21%) used: 47.58 GiB (10.2%) fs: ext4
    dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 19.43 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 30.0 C pch: 29.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: 2062 pm: dpkg pkgs: 2054 libs: 1039 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 8
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
    2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm ahs
Info:
  Processes: 251 Uptime: 13h 51m wakeups: 673 Memory: 15.43 GiB used: 1.44 GiB (9.3%)
  Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0
  alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI


Code: Select all

System:
  Kernel: 6.1.0-13-amd64 [6.1.55-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64 root=UUID=<filter> ro quiet splash
    resume=UUID=<filter> resume_offset=8472576
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.1_x64 Libretto October 15  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: HP product: HP EliteBook 840 G5 v: N/A serial: <superuser required> Chassis:
    type: 10 serial: <superuser required>
  Mobo: HP model: 83B2 v: KBC Version 04.6E.00 serial: <superuser required> UEFI: HP
    v: Q78 Ver. 01.25.00 date: 06/16/2023
Battery:
  ID-1: BAT0 charge: 27.4 Wh (81.1%) condition: 33.8/50.2 Wh (67.3%) volts: 11.5 min: 11.6
    model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: discharging cycles: 278
CPU:
  Info: model: Intel Core i7-8550U bits: 64 type: MT MCP arch: Coffee Lake gen: core 8 level: v3
    note: check built: 2017 process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 0xA (10)
    microcode: 0xF4
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 462 high: 900 min/max: 400/4000 scaling: driver: intel_pstate
    governor: powersave cores: 1: 400 2: 400 3: 400 4: 400 5: 400 6: 400 7: 900 8: 400
    bogomips: 31999
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel UHD Graphics 620 vendor: Hewlett-Packard driver: i915 v: kernel arch: Gen-9.5
    process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:5917 class-ID: 0300
  Device-2: Chicony HP HD Camera type: USB driver: uvcvideo bus-ID: 1-9:4 chip-ID: 04f2:b5e7
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: AU Optronics 0x3b3d built: 2017 res: 1920x1080 hz: 60 dpi: 158
    gamma: 1.2 size: 309x174mm (12.17x6.85") diag: 355mm (14") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel UHD Graphics 620 (KBL GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
    alternate: snd_soc_skl,snd_sof_pci_intel_skl bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
  API: ALSA v: k6.1.0-13-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I219-V vendor: Hewlett-Packard driver: e1000e v: kernel port: N/A
    bus-ID: 00:1f.6 chip-ID: 8086:15d8 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:24fd class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  IF-ID-1: wwan0 state: down mac: N/A
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-7:2
    chip-ID: 8087:0a2b class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 5 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 100 hci-v: 4.2 rev: 100
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 476.94 GiB used: 40.62 GiB (8.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLB512HAJQ-000H1 size: 476.94 GiB
    block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: EXA72H1Q temp: 24.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 476.69 GiB size: 468.13 GiB (98.21%) used: 40.62 GiB (8.7%) fs: ext4
    dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 19.47 GiB used: 116 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 28.0 C pch: 25.5 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: 2080 pm: dpkg pkgs: 2074 libs: 1049 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 6
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
Info:
  Processes: 275 Uptime: 12h 1m wakeups: 43 Memory: 15.47 GiB used: 1.34 GiB (8.6%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Top
User avatar
AlphaElwedritsch
Posts: 54
Joined: Fri Apr 28, 2023 5:49 am

Re: MX-23.1 // Problems with Standby Mode

#2 Post by AlphaElwedritsch »

Did more investigation

Seems lock screen will not be activated before system is going to standby

If i deactivate the lock screen and close the lid, system ist going to standy. after reactivating i see the desktop and it works

So for me, the problem is, that system is going to fast in standby that lock screen cannot be activated
Only when closing the lid
when system is going into standby via timeout, no problems
Top
User avatar
AlphaElwedritsch
Posts: 54
Joined: Fri Apr 28, 2023 5:49 am

Re: MX-23.1 // Problems with Standby Mode

#3 Post by AlphaElwedritsch »

It's exactly that: (sorry I have it only in german)

https://imagebin.ca/v/7fsYIYDY4fuD

Lock screen checked -> problems
unchecked -> no problems
Top
User avatar
AlphaElwedritsch
Posts: 54
Joined: Fri Apr 28, 2023 5:49 am

Re: MX-23.1 // Problems with Standby Mode

#4 Post by AlphaElwedritsch »

xflock4 is not executed before the system is put into standby mode.
Top
User avatar
lari
Posts: 1
Joined: Fri Dec 08, 2023 4:06 pm

Re: MX-23.1 // Problems with Standby Mode

#5 Post by lari »

I had exactly the same problem, but found from another thread on this forum that setting Compositor -> Vblank -> Off on MX Tweak solves this problem. I have no idea what that does, but after doing this setting the problem is gone.

This quite evidently is a bug, but I'm a newcomer to MX Linux and don't yet know where to report this so that this would be fixed for everyone by default.
Top
User avatar
j2mcgreg
Global Moderator
Posts: 6559
Joined: Tue Oct 23, 2007 12:04 pm

Re: MX-23.1 // Problems with Standby Mode

#6 Post by j2mcgreg »

lari wrote: ↑Fri Dec 08, 2023 4:12 pm I had exactly the same problem, but found from another thread on this forum that setting Compositor -> Vblank -> Off on MX Tweak solves this problem. I have no idea what that does, but after doing this setting the problem is gone.

This quite evidently is a bug, but I'm a newcomer to MX Linux and don't yet know where to report this so that this would be fixed for everyone by default.
Place your bug report here:
viewforum.php?f=97
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.
Top
Post Reply

Return to “Software / Configuration”