Since installing "MX Package Installer", Version 23.11.02, on the 15th of November 2023, there is a problem.
How I use updates
- When I start my system each day I open a terminal and run the command "sudo apt-get update". This results in the "You have updates" symbol turning green (if there are updates) within seconds of closing the terminal.
- Then I click on the green symbol and install any pending updates.
- Then I open "MX Package Installer" and click on the "Flatpaks" tab. I then click on "Upgrade all".
The problem
- At this stage a pop-up window appears with the title "Error" containing the message, "Problem detected while installing, please inspect the console output".
- When I move the pop-up window to one side I can see the "console output" which says, "Proceed with these changes to the system installation? [Y/n]: n".
My analysis
- The question has received the response "n" automatically, without any input from me.
My current workaround
- I open a terminal and run the command "Flatpak update", which works as it should.
Request
Could you please add fixing this to your "to-do" list?
Thank you.
----------------
QSI
Code: Select all
System:
Kernel: 6.1.0-13-amd64 [6.1.55-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23.1_x64 Libretto July 31 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop Mobo: Intel model: NUC5i5RYB v: H40999-504 serial: <superuser required> UEFI: Intel
v: RYBDWi35.86A.0350.2015.0812.1722 date: 08/12/2015
Battery:
Device-1: hidpp_battery_0 model: Logitech M350 Wireless Mouse serial: <filter> charge: 100%
(should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: Intel Core i5-5250U bits: 64 type: MT MCP arch: Broadwell gen: core 5 level: v3
note: check built: 2015-18 process: Intel 14nm family: 6 model-id: 0x3D (61) stepping: 4
microcode: 0x2F
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 649 high: 798 min/max: 500/2700 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 798 2: 500 3: 798 4: 500 bogomips: 12769
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel HD Graphics 6000 driver: i915 v: kernel arch: Gen-8 process: Intel 14nm
built: 2014-15 ports: active: HDMI-A-1 empty: DP-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:1626
class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x317mm (20.00x12.48") s-diag: 599mm (23.57")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: HP E243i serial: <filter> built: 2020 res: 1920x1200
hz: 60 dpi: 94 gamma: 1.2 size: 518x324mm (20.39x12.76") diag: 611mm (24.1") ratio: 16:10 modes:
max: 1920x1200 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 6000 (BDW GT3)
direct-render: Yes
Audio:
Device-1: Intel Broadwell-U Audio driver: snd_hda_intel v: kernel bus-ID: 2-2:3
chip-ID: 1130:1620 class-ID: 0300
Device-2: Intel Wildcat Point-LP High Definition Audio driver: snd_hda_intel v: kernel
bus-ID: 00:1b.0 chip-ID: 8086:9ca0 class-ID: 0403
Device-3: Tenx USB AUDIO type: USB driver: hid-generic,snd-usb-audio,usbhid
API: ALSA v: k6.1.0-13-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I218-V driver: e1000e v: kernel port: 3080 bus-ID: 00:19.0
chip-ID: 8086:15a3 class-ID: 0200
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.02 TiB used: 494.21 GiB (47.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO M.2 120GB size: 111.79 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 1B6Q
scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: HGST (Hitachi) model: HTS721010A9E630 size: 931.51 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: A3J0 scheme: GPT
Partition:
ID-1: / raw-size: 95.3 GiB size: 93.24 GiB (97.84%) used: 22.85 GiB (24.5%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 400 MiB size: 399.8 MiB (99.94%) used: 296 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 931.5 GiB size: 915.82 GiB (98.32%) used: 471.37 GiB (51.5%) fs: ext4
dev: /dev/sdb1 maj-min: 8:17
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 16.09 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
maj-min: 8:3
Sensors:
System Temperatures: cpu: 34.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2595 pm: dpkg pkgs: 2549 libs: 1371 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 46
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb https://mx-linux.ethz.ch/mx-packages/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb [arch=amd64] https://repo.vivaldi.com/stable/deb/ stable main
Info:
Processes: 210 Uptime: 21m wakeups: 5 Memory: 15.51 GiB used: 1.47 GiB (9.5%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
as always ... 
NOBODY is PERFECT 
Keep on Moving! or: as we say in Germany: ABBUZZE ..WEIDAA!! 