GRUB booting need HELP please [Solved]

[Charlie Brown]

Yep.

[neogeo]

@Charlie Brown QSI will be posted early in the morning (my local time)

@ghunter i know that but that is not a point.

[neogeo]

Code: Select all

System:
  Kernel: 6.1.0-10-amd64 [6.1.38-2] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
  Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_x64 Libretto July
    31 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Desktop Mobo: ASRock model: B450M Pro4 R2.0 serial: <superuser required>
    UEFI: American Megatrends v: P5.70 date: 10/20/2022
CPU:
  Info: model: AMD Ryzen 7 5700G with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3 gen: 4
    level: v3 note: check built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80)
    stepping: 0 microcode: 0xA50000D
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
    desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 1424 high: 1700 min/max: 1400/4672 boost: disabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1413 2: 1700 3: 1400 4: 1412 5: 1410 6: 1400
    7: 1400 8: 1413 9: 1400 10: 1400 11: 1400 12: 1400 13: 1400 14: 1437 15: 1400 16: 1400
    bogomips: 121363
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: always-on, RSB
    filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Cezanne [Radeon Vega Series / Radeon Mobile Series] driver: amdgpu v: kernel
    arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s ports: active: DP-1 empty: HDMI-A-1,HDMI-A-2 bus-ID: 07:00.0
    chip-ID: 1002:1638 class-ID: 0300 temp: 32.0 C
  Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
    loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: DP-1 mapped: DisplayPort-0 model: Samsung SyncMaster serial: <filter> built: 2010
    res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2 size: 477x268mm (18.78x10.55") diag: 547mm (21.5")
    ratio: 16:9 modes: max: 1920x1080 min: 640x480
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon Graphics (renoir LLVM 15.0.6 DRM 3.49
    6.1.0-10-amd64) direct-render: Yes
Audio:
  Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 07:00.1 chip-ID: 1002:1637
    class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: ASRock driver: snd_hda_intel v: kernel pcie:
    gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 07:00.6 chip-ID: 1022:15e3
    class-ID: 0403
  API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock driver: r8169
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 1.29 TiB used: 0 KiB (0.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Gigabyte model: GP-GSM2NE3512GNTD size: 476.94 GiB
    block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: EDFMB0.5 temp: 19.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Patriot model: Blast size: 111.79 GiB block-size:
    physical: 512 B logical: 512 B speed: 1.5 Gb/s type: SSD serial: <filter> rev: 12.2 scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Geil model: R3 256GB size: 238.47 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 8A0 scheme: GPT
  ID-4: /dev/sdc maj-min: 8:32 vendor: Toshiba model: MK5061GSYN size: 465.76 GiB block-size:
    physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: 0K
    scheme: GPT
  ID-5: /dev/sdd maj-min: 8:48 type: USB vendor: SanDisk model: Ultra Fit size: 28.65 GiB
    block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  Message: No partition data found.
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 35.6 C mobo: N/A gpu: amdgpu temp: 31.0 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2427 libs: 1338 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
    pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
    2: deb http://mxrepo.com/mx/repo/ bookworm ahs
Info:
  Processes: 343 Uptime: 1m wakeups: 1 Memory: 14.99 GiB used: 1.52 GiB (10.1%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

[neogeo]

Here it is. Clean QSI from LiveUSB MX23.
The situation is still such that loading MX21.3 right next to the SDDM Login screen darkens it and throws out the mouse arrow which moves normally. I managed to log in via Ctrl+Alt+F1 as a user, the distro is loaded complete with a graphical environment, but after that the USB ports freeze (or something else), that is, the screen image is frozen and nothing reacts.

[Charlie Brown]

Can you try this?

Add:

Code: Select all

idle=nomwait nvme_core.default_ps_max_latency_us=5500

in boot parameters then go on boot.


(Normally you press E on Grub menu, then add after ... ro quiet .... and press F10 to go on boot)

[ghunter]

Hi

I can not see bootcode=splasht at
https://mxlinux.org/wiki/system/boot-parameters/

[Charlie Brown]

splasht is there by default on live session (a simplified (text) version of splash that you can disable if you like).

[neogeo]

Hi.
I tried this line of code in Grub now

Code: Select all

idle=nomwait nvme_core.default_ps_max_latency_us=5500

but everything remains the same :(
Now I think my nvme Gigabite is dead because my wife's windows installation is broken and can't install windows on that nvme anymore :( Oh my Goodness, it seems i have Gremlins in my PC :(

[neogeo]

S O L V E D !!!
I had an Image of an entire SSD running MX Linux that was made from Macrium (found it accidentally) .
I restored that Image to the SSD, did a Grub Reinstall from Live MX and everything worked from 1st!!!