no detect nmv ssd internal

[Charlie Brown]

... In a live session, shouldn't they both be ...

But.. they're independent, no matter installed or live. The partitioning scheme may be GPT or MBR and Boot mode may be Uefi or Legacy ...

[CaputAlista]

You gave me an idea. Take another pendrive download rufus download mx again this time xfce. Rufus mbr, copy it as iso only (not dd).
I boot from USB C and it recognizes my NVME partitions.
It must be the program with which you install the iso.
Solved using rufus

[CaputAlista]

This is what has me a bit confused:
the Data Traveller is partitioned as MBR ==> idea

Code: Select all

System:
  Kernel: 6.5.0-1mx-ahs-amd64 [6.5.3-1~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.1_ahs_x64 Libretto October 15  2023 base: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: Convertible System: HP product: HP Pavilion x360 Convertible 15-er0xxx
    v: Type1ProductConfigId serial: <superuser required> Chassis: type: 31
    serial: <superuser required>
  Mobo: HP model: 88BC v: 66.55 serial: <superuser required> UEFI: Insyde v: F.21
    date: 03/21/2023
Battery:
  ID-1: BAT0 charge: 42.1 Wh (100.0%) condition: 42.1/42.1 Wh (100.0%) volts: 12.9 min: 11.6
    model: 313-2C-3C-A PC03043XL type: Li-ion serial: <filter> status: full cycles: 18
  Device-1: hid-0018:04F3:2CE2.0003-battery model: ELAN2514:00 04F3:2CE2 serial: N/A charge: N/A
    status: N/A
CPU:
  Info: model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP arch: Tiger Lake gen: core 11
    level: v4 note: check built: 2020 process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xA6
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 320 KiB
    desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB desc: 4x1.2 MiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 995 high: 1300 min/max: 400/4200 scaling: driver: intel_pstate
    governor: powersave cores: 1: 1039 2: 1174 3: 400 4: 696 5: 904 6: 1229 7: 1221 8: 1300
    bogomips: 38707
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Vulnerable: No microcode
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional, RSB filling,
    PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: Hewlett-Packard driver: i915
    v: kernel arch: Gen-12.1 process: Intel 10nm built: 2020-21 ports: active: eDP-1
    empty: DP-1,HDMI-A-1 bus-ID: 0000:00:02.0 chip-ID: 8086:9a49 class-ID: 0300
  Device-2: Cheng Uei Precision Industry (Foxlink) HP Wide Vision HD Camera type: USB
    driver: uvcvideo bus-ID: 3-4:3 chip-ID: 05c8:03df class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: LG Display 0x064c built: 2019 res: 1920x1080 hz: 60 dpi: 142 gamma: 1.2
    size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel Xe Graphics (TGL GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: Hewlett-Packard
    driver: sof-audio-pci-intel-tgl alternate: snd_hda_intel,snd_sof_pci_intel_tgl
    bus-ID: 0000:00:1f.3 chip-ID: 8086:a0c8 class-ID: 0401
  API: ALSA v: k6.5.0-1mx-ahs-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek vendor: Hewlett-Packard driver: rtw89_8852ae v: kernel modules: wl port: 3000
    bus-ID: 0000:02:00.0 chip-ID: 10ec:a85a class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 3-10:5
    chip-ID: 0bda:385a class-ID: e001 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 8207 hci-v: 5.2 rev: d9b8
  Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd v: 0.6 port: N/A
    bus-ID: 0000:00:0e.0 chip-ID: 8086:9a0b rev: class-ID: 0104
Drives:
  Local Storage: total: 505.81 GiB used: 67.04 GiB (13.3%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba model: KBG40ZNV512G KIOXIA size: 476.94 GiB
    block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: HP00AE00 temp: 46.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: DataTraveler 3.0 size: 28.87 GiB
    block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 0000 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  Message: No partition data found.
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 46.0 C mobo: N/A
  Fan Speeds (RPM): cpu: 0 fan-2: 0
Repos:
  Packages: pm: dpkg pkgs: 2054 libs: 1041 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
    2: deb http://mxrepo.com/mx/repo/ bookworm ahs
Info:
  Processes: 265 Uptime: 10m wakeups: 1106 Memory: 7.53 GiB used: 2.1 GiB (28.0%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

[j2mcgreg]

@CaputAlista wrote:

This is what has me a bit confused:
the Data Traveller is partitioned as MBR ==> idea

Redo it, but this time specify that Rufus uses GPT partitioning.

[fehlix]

You gave me an idea. Take another pendrive download rufus download mx again this time xfce. Rufus mbr, copy it as iso only (not dd).
I boot from USB C and it recognizes my NVME partitions.
It must be the program with which you install the iso.
Solved using rufus

WIth MX Live USB Maker, you can choose
either MBR ot GPT partition table; and in addition you can als choose dd-dump mode .
May be try as @j2mcgreg suggested first GPT with MX Live USB maker.
Note: In theory both MBR/GPT do work most of the time for UEFI booting, but as in your case,
booting with MBR, may "confuse" the PC-BIOS/UEFI system not to look further for GPT drives.
Thanks

[Charlie Brown]

... this time xfce. ... and it recognizes my NVME partitions...

Kernel: 6.5.0-1mx-ahs

(I was going to suggest even the latest Liquorix, just quit for it was a live usb (as you needed 2 more steps to make it permanent))

[Charlie Brown]

If you like KDE more than Xfce: you can boot with that, then

• install the 6.5 from "MX Package Installer" with 2 clicks,

• then "MX RemasterCC from menu..

• finally "Live-Usb Kernel Updater"

to make it permanent.

(... Then reboot with that usb)

[CaputAlista]

@CaputAlista wrote:

This is what has me a bit confused:
the Data Traveller is partitioned as MBR ==> idea

Redo it, but this time specify that Rufus uses GPT partitioning.

I have another HP but with an HDD and I ran mxlinux and remastered it. And now what I found is the problem is state machine that changes created by mx linux. I didn't lose my mx remaster because I recreated it with rufus and then overwritten the filesystem.

[j2mcgreg]

@CaputAlista wrote:

I have another HP but with an HDD and I ran mxlinux and remastered it. And now what I found is the problem is state machine that changes created by mx linux. I didn't lose my mx remaster because I recreated it with rufus and then overwritten the filesystem.

Can you expand this statement? I'm not sure about what you are trying to say.

[CaputAlista]

@CaputAlista wrote:

I have another HP but with an HDD and I ran mxlinux and remastered it. And now what I found is the problem is state machine that changes created by mx linux. I didn't lose my mx remaster because I recreated it with rufus and then overwritten the filesystem.

Can you expand this statement? I'm not sure about what you are trying to say.

I discovered . You are only the parameter pci=nomsi. On hp13 x360 13 with hdd and only hdd prevents the ram memory from being saturated. But this parameter means that nvme is not seen if I boot the most current hp15-er000. eureka