[SOLVED) MX23 Bluetooth

Help for Current Versions of MX
When asking for help, use Quick System Info from MX Tools. It will be properly formatted using the following steps.
1. Click on Quick System Info in MX Tools
2. Right click in your post and paste.
Forum rules
Post Reply
Message
Author
User avatar
el.Barto
Posts: 28
Joined: Tue Aug 23, 2016 12:14 pm

[SOLVED) MX23 Bluetooth

#1 Post by el.Barto »

Hello,

today I installed MX23 on my Tuxedo Infintybook S14 Gen6, which was running MX21 before.

Everything seems to fine, but I can't pair my Logitech MX Anywhere 3 Mouse and my Logithech Spotlight via Bluetooth. Both aren't discovered when I hit search in "Bluetooth-Geräte" (my installation-language is german...) and also bluetoothctl can't find both when scanning. On MX21 both were paired and worked flawlessly.

On MX23 pairing was possible with a Numberpad and my Aftershoks Opencomm Headset.

But the audio-output is not send to the Headset automatically when it is connected. It's annoying to select the Headset everytime I connect it.

Any ideas?

Code: Select all

System:
  Kernel: 6.4.0-1mx-ahs-amd64 [6.4.4-1~mx23+1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.4.0-1mx-ahs-amd64 root=UUID=<filter> ro quiet splash
    init=/lib/systemd/systemd
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_ahs_x64 Libretto July 31  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: TUXEDO product: TUXEDO InfinityBook S 14 Gen6 v: N/A
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: NB01 model: L14xMU serial: <superuser required> UEFI: INSYDE v: 1.07.13NRTR5
    date: 05/01/2021
Battery:
  ID-1: BAT0 charge: 38.7 Wh (54.8%) condition: 70.6/73.9 Wh (95.4%) volts: 7.6 min: 7.7
    model: Notebook BAT type: Li-ion serial: <filter> status: discharging
CPU:
  Info: model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP arch: Tiger Lake gen: core 11
    level: v4 note: check built: 2020 process: Intel 10nm family: 6 model-id: 0x8C (140) stepping: 1
    microcode: 0xAC
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 320 KiB
    desc: d-4x48 KiB; i-4x32 KiB L2: 5 MiB desc: 4x1.2 MiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 1826 high: 2400 min/max: 400/4200 scaling: driver: intel_pstate
    governor: powersave cores: 1: 1258 2: 1434 3: 2400 4: 1123 5: 2400 6: 1194 7: 2400 8: 2400
    bogomips: 38707
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional, RSB filling,
    PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: CLEVO/KAPOK driver: i915 v: kernel
    arch: Gen-12.1 process: Intel 10nm built: 2020-21 ports: active: eDP-1 empty: DP-1, DP-2, DP-3,
    DP-4, HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:9a49 class-ID: 0300
  Device-2: Chicony USB2.0 Camera type: USB driver: uvcvideo bus-ID: 3-7:2 chip-ID: 04f2:b684
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: AU Optronics 0x623d built: 2018 res: 1920x1080 hz: 60 dpi: 158
    gamma: 1.2 size: 309x174mm (12.17x6.85") diag: 355mm (14") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel Xe Graphics (TGL GT2) direct-render: Yes
Audio:
  Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: CLEVO/KAPOK driver: snd_hda_intel
    v: kernel alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:a0c8 class-ID: 0403
  API: ALSA v: k6.4.0-1mx-ahs-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: off (using pipewire-pulse) tools: pacat,pactl,pavucontrol
Network:
  Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel modules: wl bus-ID: 00:14.3
    chip-ID: 8086:a0f0 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-10:3 chip-ID: 8087:0026
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 2090 hci-v: 5.2 rev: 2090
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 465.76 GiB used: 215.14 GiB (46.2%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 500GB size: 465.76 GiB
    block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 5B2QGXA7 temp: 32.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 48.83 GiB size: 47.76 GiB (97.81%) used: 14.4 GiB (30.1%) fs: ext4
    dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 432 KiB (0.1%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 408.43 GiB size: 400.95 GiB (98.17%) used: 200.74 GiB (50.1%) fs: ext4
    dev: /dev/nvme0n1p4 maj-min: 259:4
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p3
    maj-min: 259:3
Sensors:
  System Temperatures: cpu: 45.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: 2328 pm: dpkg pkgs: 2317 libs: 1287 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 11
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
    1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
    2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
    1: deb [arch=amd64] https://repo.vivaldi.com/stable/deb/ stable main
Info:
  Processes: 282 Uptime: 15m wakeups: 32543 Memory: 7.54 GiB used: 2.63 GiB (34.9%) Init: systemd
  v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Last edited by el.Barto on Sun Sep 10, 2023 5:48 am, edited 1 time in total.
Top
User avatar
FullScale4Me
Posts: 1017
Joined: Fri Jan 08, 2021 11:30 pm

Re: MX23 Bluetooth

#2 Post by FullScale4Me »

See How to get Bluetooth Audio working in MX-23 Xfce
Michael O'Toole
MX Linux facebook group moderator
Dell OptiPlex 7050 i7-7700, MX Linux 23 Xfce & Win 11 Pro
HP Pavilion P2-1394 i3-2120T, MX Linux 23 Xfce & Win 10 Home
Dell Inspiron N7010 Intel Core i5 M 460, MX Linux 23 Xfce & KDE, Win 10
Top
User avatar
el.Barto
Posts: 28
Joined: Tue Aug 23, 2016 12:14 pm

Re: MX23 Bluetooth

#3 Post by el.Barto »

Thank you for sharing the link.

Somehow this can't be true. In MX21 I just had to connect the Headphones and the sound was played on them.

Now I have to manually set the output to the headphones.

Seems like a great stept forward to me :-(

My Logitech-Equipment is properly recognized in MX21, to which I switched back.
Top
User avatar
Stevo
Developer
Posts: 14441
Joined: Fri Dec 15, 2006 7:07 pm

Re: [SOLVED) MX23 Bluetooth

#4 Post by Stevo »

I also found that annoying, but the switching works automatically on our KDE Edition.

You can install indicator-sound-switcher to make manual switching less annoying on XFCE:

Code: Select all

$ apt show indicator-sound-switcher 
Package: indicator-sound-switcher
Version: 2.3.9-1~mx23+1
Priority: optional
Section: python
Maintainer: Steven Pusser <stevep@mxlinux.org>
Original-Maintainer: Dmitry Kann <yktooo@gmail.com>
Installed-Size: 357 kB
Depends: gir1.2-ayatanaappindicator3-0.1 | gir1.2-appindicator3-0.1, gir1.2-gtk-3.0 (>= 3.20), gir1.2-keybinder-3.0, libpulse0, python3-gi, python3:any
Homepage: https://github.com/yktoo/indicator-sound-switcher
Download-Size: 56.5 kB
APT-Manual-Installed: yes
APT-Sources: http://la.mxrepo.com/mx/repo bookworm/main amd64 Packages
Description: Sound input/output selector indicator
 It shows an icon in the indicator area or the system tray (whatever is
 available in your desktop environment). The icon's menu allows you to switch
 the current sound input and output (i.e. source and sink ports in
 PulseAudio's terms, respectively) with just two clicks.
MXPI = MX Package Installer
QSI = Quick System Info from menu
The MX Test repository is mostly backports; not the same as Debian testing
Top
Post Reply

Return to “MX Help”