Ver 23 Iso installer failed do hash match check and show HDD partiion

When you run into problems installing MX Linux XFCE
Forum rules
Post Reply
Message
Author
almahdi
Posts: 89
Joined: Fri Aug 14, 2020 11:19 pm

Ver 23 Iso installer failed do hash match check and show HDD partiion

#1 Post by almahdi »

This rather painful confusing problem in the ver. 21 and later one 23 Iso installers, both failed in hash match check

Moreover both the installer in its run progress failed to output HDD partitions layout as it just shows blank BG (here white)

Code: Select all

$ md5sum -b MX-23_x64.iso.md5  MX-23_x64.iso 
facd26421014d4cb7d0e4966099711d8 *MX-23_x64.iso.md5
959ac7c2b933203d65de7764fc87fb6e *MX-23_x64.iso

$ sha256sum -b MX-23_x64.iso.sha256  MX-23_x64.iso 
b8e7c71f132a06532e976a0cfb8ea852f1886ce7e7c8c64fa11b898e5bd576b6 *MX-23_x64.iso.sha256
854c0f5963d2a97f115b4dccc54e42f34302210a118b0c610f212fffd9fd7c2c *MX-23_x64.iso
though sign is valid

Code: Select all

$ gpg --no-default-keyring --keyring gnupg-ring:trustedkeys.gpg --keyserver hkps://keys.openpgp.org  --recv-keys 409C71B3BCFDED0A 70938C780679EE98 9B68A1E8B9B6375C 13C74A22892C32F1 A80582E000067FDD
gpg: keyring '/home/budi/.gnupg/trustedkeys.gpg' created
gpg: key A80582E000067FDD: public key "anticapitalista (change of address) <anticapitalista@riseup.net>" imported
gpg: key 13C74A22892C32F1: public key "Steven K Pusser <stevopusser@gmail.com>" imported
gpg: key 9B68A1E8B9B6375C: public key "Dolphin Oracle (mxlinux) <dolphinoracle@gmail.com>" imported
gpg: key 70938C780679EE98: public key "Adrian <adrian@mxlinux.org>" imported
gpg: key 409C71B3BCFDED0A: public key "Michael Pavletich <m_pav10-4@thepavs.net.nz>" imported

$ gpgv --keyring trustedkeys.gpg  MX-23_x64.iso.sig ../../MX-23_x64.iso 
gpgv: Signature made Mon 31 Jul 2023 03:16:16 AM WIB
gpgv:                using RSA key F62EDEAA3AE70A9C99DAC4189B68A1E8B9B6375C
gpgv: Good signature from "Dolphin Oracle (mxlinux) <dolphinoracle@gmail.com>"
So what'd be good idea to solve such >
Top
User avatar
Adrian
Developer
Posts: 8875
Joined: Wed Jul 12, 2006 1:42 am

Re: Ver 23 Iso installer failed do hash match check and show HDD partiion

#2 Post by Adrian »

That's not how you check md5sum.

Code: Select all

md5sum -b MX-23_x64.iso.md5  MX-23_x64.iso
That would just display the checksum of the .md5 file which is not relevant here. What you need to do is to do a "-c" or "--check", like this:

Code: Select all

md5sum -c MX-23_x64.iso.md5
It should pick up the .iso file by itself it's in the same directory.
Top
almahdi
Posts: 89
Joined: Fri Aug 14, 2020 11:19 pm

Re: Ver 23 Iso installer failed do hash match check and show HDD partiion

#3 Post by almahdi »

So sorry, mistake again.

It does match now

Code: Select all

$ md5sum -c MX-23_x64.iso.md5
MX-23_x64.iso: OK

$ sha256sum -c MX-23_x64.iso.sha256 
MX-23_x64.iso: OK
So what's on earth the confusig trouble, the installer when in the middle of progress failed to output HDD partitions layout, just showing blank white as its background
Last edited by almahdi on Tue Aug 01, 2023 10:50 am, edited 1 time in total.
Top
User avatar
CharlesV
Global Moderator
Posts: 7080
Joined: Sun Jul 07, 2019 5:11 pm

Re: Ver 23 Iso installer failed do hash match check and show HDD partiion

#4 Post by CharlesV »

Please post your QSI ( Quick System Info )
*QSI = Quick System Info from menu (Copy for Forum)
*MXPI = MX Package Installer
*Please check the solved checkbox on the post that solved it.
*Linux -This is the way!
Top
almahdi
Posts: 89
Joined: Fri Aug 14, 2020 11:19 pm

Re: Ver 23 Iso installer failed do hash match check and show HDD partiion

#5 Post by almahdi »

This's being output on non systemd Arch now

Code: Select all

$ inxi -F
System:
  Host: budi-hppav Kernel: 6.3.6-artix1-1 arch: x86_64 bits: 64 Desktop: Xfce
    v: 4.18.1 Distro: Artix Linux
Machine:
  Type: Laptop System: Hewlett-Packard product: HP Pavilion 15 Notebook PC
    v: 097B120000005F00000600080 serial: <superuser required>
  Mobo: Hewlett-Packard model: 2263 v: 72.48 serial: <superuser required>
    UEFI: American Megatrends v: F.46 date: 04/18/2018
Battery:
  ID-1: BAT0 charge: 32.7 Wh (100.0%) condition: 32.7/32.7 Wh (100.0%)
CPU:
  Info: quad core model: AMD A10-7300 Radeon R6 10 Compute Cores 4C+6G
    bits: 64 type: MT MCP cache: L2: 4 MiB
  Speed (MHz): avg: 1097 min/max: 1100/1900 cores: 1: 1098 2: 1098 3: 1098
    4: 1097
Graphics:
  Device-1: AMD Kaveri [Radeon R6 Graphics] driver: radeon v: kernel
  Device-2: AMD Topaz XT [Radeon R7 M260/M265 / M340/M360 M440/M445 530/535
    620/625 Mobile] driver: amdgpu v: kernel
  Device-3: Cheng Uei Precision Industry (Foxlink) Webcam driver: uvcvideo
    type: USB
  Display: x11 server: X.org v: 1.21.1.8 driver: X: loaded: amdgpu,radeon
    unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: radeon
    resolution: <missing: xdpyinfo/xrandr> resolution: 1920x1080
  API: OpenGL v: 4.5 Mesa 23.1.3 renderer: KAVERI ( LLVM 15.0.7 DRM 2.50
    6.3.6-artix1-1)
Audio:
  Device-1: AMD Kaveri HDMI/DP Audio driver: snd_hda_intel
  Device-2: AMD FCH Azalia driver: snd_hda_intel
  API: ALSA v: k6.3.6-artix1-1 status: kernel-api
  Server-1: PulseAudio v: 16.1 status: active
Network:
  Device-1: Realtek RTL8723BE PCIe Wireless Network Adapter driver: rtl8723be
  IF: wlan0 state: up mac: 70:77:81:b4:da:a3
  Device-2: Realtek RTL810xE PCI Express Fast Ethernet driver: r8169
  IF: eth0 state: down mac: 3c:a8:2a:b8:47:a1
Bluetooth:
  Device-1: Realtek Bluetooth Radio driver: btusb type: USB
  Report: rfkill ID: hci0 state: up address: see --recommends
Drives:
  Local Storage: total: 931.51 GiB used: 77.19 GiB (8.3%)
  ID-1: /dev/sda vendor: Seagate model: ST1000LX015-1U7172 size: 931.51 GiB
Partition:
  ID-1: / size: 31.33 GiB used: 14.78 GiB (47.2%) fs: ext4 dev: /dev/sda6
  ID-2: /boot/efi size: 95 MiB used: 7.8 MiB (8.2%) fs: vfat dev: /dev/sda2
  ID-3: /home size: 124.93 GiB used: 62 GiB (49.6%) fs: ext4 dev: /dev/sda12
  ID-4: /opt size: 3.86 GiB used: 415.1 MiB (10.5%) fs: ext4 dev: /dev/sda15
Swap:
  ID-1: swap-1 type: partition size: 6.49 GiB used: 0 KiB (0.0%)
    dev: /dev/sda5
Sensors:
  System Temperatures: cpu: 97.9 C mobo: N/A
  Fan Speeds (RPM): N/A
  GPU: device: radeon temp: 98.0 C device: amdgpu temp: 75.0 C
Info:
  Processes: 209 Uptime: 1h 40m Memory: total: 8 GiB note: est.
  available: 6.71 GiB used: 1.28 GiB (19.1%) Shell: Bash inxi: 3.3.28
Top
User avatar
DukeComposed
Posts: 1295
Joined: Thu Mar 16, 2023 1:57 pm

Re: Ver 23 Iso installer failed do hash match check and show HDD partiion

#6 Post by DukeComposed »

almahdi wrote: ↑Tue Aug 01, 2023 10:23 am So what's on earth the confusig trouble, the installer when in the middle of progress failed to output HDD partitions layout, just showing blank white as its background
Let me ask a clarifying question here. What, precisely, are you trying to accomplish? From your recent posts I'm not clear on exactly what it is you are trying to do. Be as specific as possible.
Top
User avatar
Adrian
Developer
Posts: 8875
Joined: Wed Jul 12, 2006 1:42 am

Re: Ver 23 Iso installer failed do hash match check and show HDD partiion

#7 Post by Adrian »

If installer fails, please attach /var/log/minstall.log
Top
almahdi
Posts: 89
Joined: Fri Aug 14, 2020 11:19 pm

Re: Ver 23 Iso installer failed do hash match check and show HDD partiion

#8 Post by almahdi »

Adrian wrote: ↑Tue Aug 01, 2023 1:14 pm If installer fails, please attach /var/log/minstall.log
can't recall the last clicks just before exit, ie. could be repeated failed clicks e.g. refresh, next, etc

Code: Select all

$ cat minstall.log
2023-08-01 13:51:52.094 DBG default: Installer version: 23.7.14mx23
2023-08-01 13:51:52.378 DBG default: << void MInstall::startup() >>
2023-08-01 13:51:52.378 DBG default: Detect EFI: 64
2023-08-01 13:51:52.378 DBG default: Exec #1: uname -m
2023-08-01 13:51:52.484 DBG default: Exit #1: 0
2023-08-01 13:51:52.484 DBG default: Detect arch: "x86_64"
2023-08-01 13:51:52.484 DBG default: Live boot: BOOT_IMAGE=(loop)/antiX/vmlinuz buuid=6edaae5a-721a-4197-a893-ba36ef49413f fromiso=/MX-23_x64.iso kbopt=caps:none quiet splasht nosplash
2023-08-01 13:52:16.194 DBG default: Exec #2: du -scb /live/aufs/boot
2023-08-01 13:52:16.229 DBG default: Exit #2: 0
2023-08-01 13:52:16.230 DBG default: Basic image: 6221382656 true "/live/iso-file/antiX/linuxfs.info"
2023-08-01 13:52:16.230 DBG default: Source inodes: 295256 Assumed block size: 4096
2023-08-01 13:52:16.230 DBG default: Minimum space: 99409345 (boot), 7430751232 (root)
2023-08-01 13:52:16.443 DBG default: Exec #3: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2023-08-01 13:52:16.481 DBG default: Exit #3: 0
2023-08-01 13:52:16.484 DBG default: Bash #4: guess-hwclock
2023-08-01 13:52:18.005 DBG default: Exit #4: 0
2023-08-01 13:52:18.005 DBG default: Bash #5: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2023-08-01 13:52:18.027 DBG default: Exit #5: 0
2023-08-01 13:52:18.030 DBG default: Bash #6: ls -1 /home | grep -Ev '^(lost\+found|demo|snapshot)$' | grep -q '[a-zA-Z0-9]'
2023-08-01 13:52:18.053 DBG default: Exit #6: 1
2023-08-01 13:52:18.053 DBG default: check for possible snapshot: false
2023-08-01 13:52:18.053 DBG default: Bash #7: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2023-08-01 13:52:18.159 DBG default: Exit #7: 0
2023-08-01 13:52:18.168 DBG default: Exec #8: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,FSVER,LABEL,MODEL,PARTFLAGS
2023-08-01 13:52:18.221 DBG default: Exit #8: 0
2023-08-01 13:52:18.222 DBG default: Exec #9: parted -lm
2023-08-01 13:52:18.881 DBG default: Exit #9: 0
2023-08-01 13:52:18.882 DBG default: Bash #10: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/*
2023-08-01 13:52:18.905 DBG default: SErr #10: "lsblk: /dev/mapper/control: not a block device\n"
2023-08-01 13:52:18.905 DBG default: Exit #10: 32
Top
Post Reply

Return to “Installation”