MX-23 RC3 (Xfce) Feedback thread

Forum rules
Locked
Message
Author
User avatar
doodstecsonhere
Posts: 86
Joined: Sat Jun 17, 2023 10:44 am

Re: MX-23 RC3 (Xfce) Feedback thread

#101 Post by doodstecsonhere »

MadMax wrote: Thu Jul 27, 2023 5:27 pm I thought there was the decision to revert the default back to apt for the time being during the alpha/beta phase?
There was, @MadMax .

"MX-Updater is back to using apt for a default backend, as nala turned out to have unforeseen issues."

https://mxlinux.org/blog/mx-23-libretto ... %20issues.
Top
yann
Posts: 24
Joined: Fri Jan 04, 2019 8:11 am

Re: MX-23 RC3 (Xfce) Feedback thread

#102 Post by yann »

doodstecsonhere wrote: Thu Jul 27, 2023 11:38 pm
my system boots up just under 700MB at boot (htop app RAM reading), but I did some modification already like switching to compton compositor instead of the default xfwm compositor in MX Tweak. Saved me about 50MB ram at boot.

Try MX23 on live usb. :)
Very good ! Thanks a lot, I was worried as the family PC just has 4GB and MX was the perfect fit. It seems that it still holds true ! Thanks again to you and to the MX team.
Top
User avatar
doodstecsonhere
Posts: 86
Joined: Sat Jun 17, 2023 10:44 am

Re: MX-23 RC3 (Xfce) Feedback thread

#103 Post by doodstecsonhere »

doodstecsonhere wrote: Thu Jul 27, 2023 11:07 am
dolphin_oracle wrote: Wed Jul 26, 2023 10:10 pm @DoodMann

fstab acutally looks correct.

**edit*** no, SWAP should be swap (lowercase) in the /etc/fstab. make that change and

Code: Select all

sudo swapon -a
and check free again.
@dolphin_oracle If I remember correctly, it was cased SWAP by default in the installer when you specify a swap partition by default (as I didn't want to modify anything as much as possible coming from only regular installs before), it should be "swap" instead of "SWAP", right? Looks like something the dev team can control on their end so the installer defaults to "swap" instead of "SWAP", so no more needing to modify the fstab file after install.

In any case, the fstab mod was a success for my swap partition. :)
Hello, MX Team and fellow forum members. :) I'd just been given an old Toshiba laptop today for the specific purpose of digitalizing old CDs/DVDs.

OF COURSE the first thing I did to is MX Snapshot from my main machine (mentioned earlier in this thread) and INSTALL MX23 RC3!!! :)

Did another BTRFS custom install with swap partition. @dolphin_oracle still had to do the fstab mod from "SWAP" to "swap" to fix swap functions, and hibernation still doesn't work, MX USB unmounter doesn't detect my USB still, some minor conky glitches at boot, but other than those non-essentials everything's working great! :) This doesn't feel like a Core2Duo laptop with an HDD at all in MX Linux! OH YEAH. :) Feels very snappy!!

QSI:

Code: Select all

Snapshot created on: 20230728_1112
System:
  Kernel: 6.3.0-2mx-ahs-amd64 [6.3.11-1~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.3.0-2mx-ahs-amd64 root=UUID=<filter> ro
    rootflags=subvol=@ quiet splash init=/lib/systemd/systemd
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_x64 Libretto July 28  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: TOSHIBA product: Satellite L310 v: PSME4L-01J005
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: TOSHIBA model: Satellite L310 serial: <superuser required> BIOS: TOSHIBA v: 3.70
    date: 04/03/2009
Battery:
  ID-1: BAT1 charge: 30.3 Wh (100.0%) condition: 30.3/45.5 Wh (66.6%) volts: 12.3 min: 12.3
    model: SANYO NS1P3SZNJSWO type: Li-ion serial: <filter> status: full
CPU:
  Info: model: Intel Core2 Duo T6400 bits: 64 type: MCP arch: Penryn level: v1 built: 2008
    process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 0xA (10) microcode: 0xA0B
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 1995 min/max: 1200/2000 scaling: driver: acpi-cpufreq governor: ondemand
    cores: 1: 1995 2: 1995 bogomips: 7979
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf mitigation: PTE Inversion
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
    affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Toshiba driver: i915 v: kernel
    arch: Gen-5 process: Intel 45nm built: 2008 ports: active: LVDS-1 empty: DP-1, DP-2, HDMI-A-1,
    SVIDEO-1, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:2a42 class-ID: 0300
  Device-2: Chicony Camera type: USB driver: uvcvideo bus-ID: 8-4:3 chip-ID: 04f2:b070
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: intel
    dri: crocus gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1280x800 s-dpi: 96 s-size: 338x211mm (13.31x8.31") s-diag: 398mm (15.69")
  Monitor-1: LVDS-1 mapped: LVDS1 model: Seiko Epson 0x3341 built: 2007 res: 1280x800 hz: 60
    dpi: 107 gamma: 1.2 size: 303x190mm (11.93x7.48") diag: 358mm (14.1") ratio: 16:10
    modes: 1280x800
  API: OpenGL v: 2.1 Mesa 22.3.6 renderer: Mesa Mobile Intel GM45 Express (CTG)
    direct-render: Yes
Audio:
  Device-1: Intel 82801I HD Audio vendor: Toshiba driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
    chip-ID: 8086:293e class-ID: 0403
  API: ALSA v: k6.3.0-2mx-ahs-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Marvell 88E8040T PCI-E Fast Ethernet vendor: Toshiba Satellite P305D-S8995E
    driver: sky2 v: 1.30 pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 07:00.0
    chip-ID: 11ab:4355 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel WiFi Link 5100 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 08:00.0 chip-ID: 8086:4232 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Toshiba Integrated Bluetooth (Taiyo Yuden) type: USB driver: btusb v: 0.8 bus-ID: 5-1:5
    chip-ID: 0930:0200 class-ID: fe01 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 2 state: down bt-service: enabled,running rfk-block:
    hardware: no software: no address: <filter>
  Info: acl-mtu: 1021:6 sco-mtu: 64:1 link-policy: rswitch hold sniff park
    link-mode: peripheral accept
Drives:
  Local Storage: total: 465.76 GiB used: 7.89 GiB (1.7%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HTS545050A7E380 size: 465.76 GiB block-size:
    physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: A6C0
    scheme: MBR
Partition:
  ID-1: / raw-size: 462.09 GiB size: 462.09 GiB (100.00%) used: 7.89 GiB (1.7%) fs: btrfs
    dev: /dev/sda1 maj-min: 8:1
  ID-2: /home raw-size: 462.09 GiB size: 462.09 GiB (100.00%) used: 7.89 GiB (1.7%) fs: btrfs
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 3.67 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
    maj-min: 8:2
Sensors:
  System Temperatures: cpu: 70.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2399 libs: 1261 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/megasync.list
    1: deb [signed-by=/usr/share/keyrings/meganz-archive-keyring.gpg] https://mega.nz/linux/repo/Debian_testing/ ./
  Active apt repos in: /etc/apt/sources.list.d/microsoft-edge.list
    1: deb [arch=amd64] https://packages.microsoft.com/repos/edge/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirror.rise.ph/mxlinux-pkg/mx/repo/ bookworm main non-free
    2: deb http://mirror.rise.ph/mxlinux-pkg/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/spotify.list
    1: deb http://repository.spotify.com stable non-free
  Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
    1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
Info:
  Processes: 238 Uptime: 14m wakeups: 1 Memory: 3.67 GiB used: 1.96 GiB (53.4%) Init: systemd
  v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Attached my minstall.log which I saved from QSI app. :)
You do not have the required permissions to view the files attached to this post.
Top
User avatar
gRegNfo
Posts: 35
Joined: Sat Jun 10, 2023 6:30 am

Re: MX-23 RC3 (Xfce) Feedback thread

#104 Post by gRegNfo »

doodstecsonhere wrote: Thu Jul 27, 2023 11:41 pm
gRegNfo wrote: Thu Jul 27, 2023 3:48 pm Just upgraded to RC3 preserving /home on my laptop (specs)
Installer had issues with grub also, though it installed the system nicelly:

Code: Select all

2023-07-27 20:19:23.833 DBG default: Installer version: 23.7.13mx23
2023-07-27 20:19:23.953 DBG default: << void MInstall::startup() >>
2023-07-27 20:19:23.953 DBG default: Detect EFI: 64
2023-07-27 20:19:23.953 DBG default: Exec #1: uname -m
2023-07-27 20:19:24.006 DBG default: Exit #1: 0
2023-07-27 20:19:24.006 DBG default: Detect arch: "x86_64"
2023-07-27 20:19:24.006 DBG default: Live boot: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash lang=en_US kbd=pt tz=Europe/Lisbon
2023-07-27 20:19:42.477 DBG default: Exec #2: du -scb /live/aufs/boot
2023-07-27 20:19:42.484 DBG default: Exit #2: 0
2023-07-27 20:19:42.485 DBG default: Basic image: 6224235008 true "/live/boot-dev/antiX/linuxfs.info"
2023-07-27 20:19:42.486 DBG default: Source inodes: 295269 Assumed block size: 4096
2023-07-27 20:19:42.486 DBG default: Minimum space: 99399748 (boot), 7433656832 (root)
2023-07-27 20:19:42.543 DBG default: Exec #3: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2023-07-27 20:19:42.557 DBG default: Exit #3: 0
2023-07-27 20:19:42.558 DBG default: Bash #4: guess-hwclock
2023-07-27 20:19:44.031 DBG default: Exit #4: 0
2023-07-27 20:19:44.031 DBG default: Bash #5: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2023-07-27 20:19:44.040 DBG default: Exit #5: 0
2023-07-27 20:19:44.041 DBG default: Bash #6: ls -1 /home | grep -Ev '^(lost\+found|demo|snapshot)$' | grep -q '[a-zA-Z0-9]'
2023-07-27 20:19:44.051 DBG default: Exit #6: 1
2023-07-27 20:19:44.051 DBG default: check for possible snapshot: false
2023-07-27 20:19:44.052 DBG default: Bash #7: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2023-07-27 20:19:44.086 DBG default: Exit #7: 0
2023-07-27 20:19:44.093 DBG default: Exec #8: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,FSVER,LABEL,MODEL,PARTFLAGS
2023-07-27 20:19:44.105 DBG default: Exit #8: 0
2023-07-27 20:19:44.105 DBG default: Exec #9: parted -lm
2023-07-27 20:19:44.797 DBG default: Exit #9: 0
2023-07-27 20:19:44.797 DBG default: Bash #10: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/*
2023-07-27 20:19:44.804 DBG default: SErr #10: "lsblk: /dev/mapper/control: not a block device\n"
2023-07-27 20:19:44.804 DBG default: Exit #10: 64
2023-07-27 20:19:44.806 DBG default: Exec #11: cryptsetup status /dev/mapper/ventoy
2023-07-27 20:19:44.822 DBG default: Exit #11: 0
2023-07-27 20:19:46.647 DBG default: Bash #12: command -v  system-keyboard-qt >/dev/null 2>&1
2023-07-27 20:19:46.661 DBG default: Exit #12: 0
2023-07-27 20:19:46.661 DBG default: Exec #13: system-keyboard-qt
2023-07-27 20:19:58.381 DBG default: SErr #13: "\"BACKSPACE\" = \"guess\"\n\"XKBLAYOUT\" = \"pt\"\n\"XKBMODEL\" = \"pc105\"\n\"XKBOPTIONS\" = \"grp:rctrl_rshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll\"\n\"XKBVARIANT\" = \"\"\n\"# KEYBOARD CONFIGURATION FILE\\n\\n# Consult the keyboard(5) manual page.\\n\\nXKBMODEL=\\\"asus_laptop\\\"\\nXKBLAYOUT=\\\"pt\\\"\\nXKBVARIANT=\\\"\\\"\\nXKBOPTIONS=\\\"grp:rctrl_rshift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp\\\"\\n\\nBACKSPACE=\\\"guess\\\"\\n\"\n"
2023-07-27 20:19:58.382 DBG default: Exit #13: 0
2023-07-27 20:20:04.202 DBG default: Bash #14: command -v  system-keyboard-qt >/dev/null 2>&1
2023-07-27 20:20:04.211 DBG default: Exit #14: 0
2023-07-27 20:20:04.212 DBG default: Exec #15: system-keyboard-qt
2023-07-27 20:20:06.196 DBG default: SErr #15: "\"BACKSPACE\" = \"guess\"\n\"XKBLAYOUT\" = \"pt\"\n\"XKBMODEL\" = \"asus_laptop\"\n\"XKBOPTIONS\" = \"grp:rctrl_rshift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp\"\n\"XKBVARIANT\" = \"\"\n"
2023-07-27 20:20:06.196 DBG default: Exit #15: 0
2023-07-27 20:20:52.688 DBG default: << bool Base::saveHomeBasic() >>
2023-07-27 20:20:52.688 DBG default: Exec #16: umount -q /dev/sda5
2023-07-27 20:20:52.700 DBG default: Exit #16: 32
2023-07-27 20:20:52.700 DBG default: Exec #17: umount -q /mnt/antiX
2023-07-27 20:20:52.705 DBG default: SErr #17: "umount: /mnt/antiX: no mount point specified.\n"
2023-07-27 20:20:52.705 DBG default: Exit #17: 32
2023-07-27 20:20:52.706 DBG default: Exec #18: mount -o ro /dev/sda5 /mnt/antiX
2023-07-27 20:20:52.766 DBG default: Exit #18: 0
2023-07-27 20:20:52.766 DBG default: Exec #19: umount -l /mnt/antiX
2023-07-27 20:20:52.772 DBG default: Exit #19: 0
2023-07-27 20:20:52.839 DBG default: ++ Preparing to install MX Linux ++
2023-07-27 20:20:52.840 DBG default: Bash #20: echo 0 > /sys/module/zswap/parameters/enabled
2023-07-27 20:20:52.847 DBG default: Exit #20: 0
2023-07-27 20:20:52.848 DBG default: Exec #21: modprobe zram
2023-07-27 20:20:52.861 DBG default: Exit #21: 0
2023-07-27 20:20:52.861 DBG default: Exec #22: zramctl zram0 -a zstd -s 16188207104
2023-07-27 20:20:52.886 DBG default: Exit #22: 0
2023-07-27 20:20:52.886 DBG default: Exec #23: mkswap -q /dev/zram0
2023-07-27 20:20:52.894 DBG default: Exit #23: 0
2023-07-27 20:20:52.894 DBG default: Exec #24: swapon -p 32767 /dev/zram0
2023-07-27 20:20:52.901 DBG default: Exit #24: 0
2023-07-27 20:20:52.901 DBG default: Exec #25: smartctl -H /dev/sda
2023-07-27 20:20:52.984 DBG default: SOut #25: "smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-10-amd64] (local build)\nCopyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2023-07-27 20:20:52.984 DBG default: Exit #25: 0
2023-07-27 20:20:52.984 DBG default: Bash #26: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2023-07-27 20:20:53.059 DBG default: Exit #26: 0
2023-07-27 20:20:53.059 DBG default: << void MInstall::setupAutoMount(bool) >>
2023-07-27 20:20:53.060 DBG default: Bash #27: ps -e | grep 'udisksd'
2023-07-27 20:20:53.088 DBG default: SOut #27: "   4957 ?        00:00:00 udisksd\n"
2023-07-27 20:20:53.088 DBG default: Exit #27: 0
2023-07-27 20:20:53.088 DBG default: Bash #28: grep -El '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d/*
2023-07-27 20:20:53.102 DBG default: Exit #28: 0
2023-07-27 20:20:53.102 DBG default: Bash #29: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | grep -Ev '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2023-07-27 20:20:53.116 DBG default: Exit #29: 1
2023-07-27 20:20:53.116 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2023-07-27 20:20:53.116 DBG default: Exec #30: touch /run/udev/rules.d/64-md-raid-assembly.rules
2023-07-27 20:20:53.122 DBG default: Exit #30: 0
2023-07-27 20:20:53.122 DBG default: Bash #31: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2023-07-27 20:20:53.126 DBG default: Exit #31: 0
2023-07-27 20:20:53.126 DBG default: Exec #32: udevadm control --reload
2023-07-27 20:20:53.156 DBG default: Exit #32: 0
2023-07-27 20:20:53.156 DBG default: Exec #33: udevadm trigger --subsystem-match=block
2023-07-27 20:20:53.176 DBG default: Exit #33: 0
2023-07-27 20:20:53.177 DBG default: Mount points:
2023-07-27 20:20:53.177 DBG default:  - "/" - "sda5" "" "/dev/sda5"
2023-07-27 20:20:53.177 DBG default: << void PartMan::preparePartitions() >>
2023-07-27 20:20:53.177 DBG default: Exec #34: umount -qR /mnt/antiX
2023-07-27 20:20:53.185 DBG default: Exit #34: 1
2023-07-27 20:20:53.185 DBG default: Exec #35: rm -rf /mnt/antiX
2023-07-27 20:20:53.190 DBG default: Exit #35: 0
2023-07-27 20:20:53.190 DBG default: Exec #36: swapon --show=NAME --noheadings
2023-07-27 20:20:53.194 DBG default: Exit #36: 0
2023-07-27 20:20:53.195 DBG default: Exec #37: findmnt --raw -o SOURCE
2023-07-27 20:20:53.199 DBG default: Exit #37: 0
2023-07-27 20:20:53.199 DBG default: ++ Preparing required partitions ++
2023-07-27 20:20:53.200 DBG default: Bash #38: sgdisk /dev/sda -q --typecode=5:8303
2023-07-27 20:20:53.213 DBG default: Exit #38: 0
2023-07-27 20:20:53.218 DBG default: Exec #39: partx -u /dev/sda
2023-07-27 20:20:53.238 DBG default: Exit #39: 0
2023-07-27 20:20:53.238 DBG default: << void PartMan::formatPartitions() >>
2023-07-27 20:20:53.238 DBG default: << void PartMan::mountPartitions() >>
2023-07-27 20:20:53.238 DBG default: ++ Mounting: / ++
2023-07-27 20:20:53.240 DBG default: Exec #40: mount --mkdir -o noatime,async,noiversion /dev/sda5 /mnt/antiX/
2023-07-27 20:20:53.311 DBG default: Exit #40: 0
2023-07-27 20:20:53.311 DBG default: Exec #41: lsblk --list -bJo PATH,UUID
2023-07-27 20:20:53.321 DBG default: Exit #41: 0
2023-07-27 20:20:53.322 DBG default: << void Base::install() >>
2023-07-27 20:20:53.322 DBG default: ++ Deleting old system ++
2023-07-27 20:20:53.323 DBG default: Exec #42: find /mnt/antiX/boot -mindepth 1 -maxdepth 1 ! -name efi -exec rm -r {} +
2023-07-27 20:20:53.356 DBG default: Exit #42: 0
2023-07-27 20:20:53.356 DBG default: Exec #43: find /mnt/antiX -mindepth 1 -maxdepth 1 ! -name home ! -name boot -exec rm -r {} +
2023-07-27 20:21:07.512 DBG default: Exit #43: 0
2023-07-27 20:21:07.512 DBG default: << void Base::copyLinux(bool) >>
2023-07-27 20:21:07.516 DBG default: ++ Copying new system ++
2023-07-27 20:21:07.518 DBG default: Exec COPY: cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/libx32 /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX
2023-07-27 20:29:09.806 DBG default: Exit COPY: 0 QProcess::NormalExit
2023-07-27 20:29:09.806 DBG default: ++ Setting system configuration ++
2023-07-27 20:29:09.808 DBG default: MkPath(SUCCESS): "/mnt/antiX/tmp"
2023-07-27 20:29:09.808 DBG default: Bash #44: /usr/sbin/live-to-installed /mnt/antiX
2023-07-27 20:29:09.911 DBG default: SErr #44: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/Installer.desktop\xE2\x80\x99: No such file or directory\nfind: \xE2\x80\x98/mnt/antiX/home/*//.idesktop/gazelle.lnk\xE2\x80\x99: No such file or directory\n"
2023-07-27 20:29:09.911 DBG default: Exit #44: 0
2023-07-27 20:29:09.911 DBG default: Install tabs
2023-07-27 20:29:09.911 DBG default: Creating fstab entry for: "/" "/dev/sda5"
2023-07-27 20:29:09.912 DBG default: Exec #45: mount --mkdir --rbind --make-rslave /dev /mnt/antiX/dev
2023-07-27 20:29:09.930 DBG default: Exit #45: 0
2023-07-27 20:29:09.930 DBG default: Exec #46: mount --mkdir --rbind --make-rslave /sys /mnt/antiX/sys
2023-07-27 20:29:09.940 DBG default: Exit #46: 0
2023-07-27 20:29:09.940 DBG default: Exec #47: mount --mkdir --rbind /proc /mnt/antiX/proc
2023-07-27 20:29:09.950 DBG default: Exit #47: 0
2023-07-27 20:29:09.950 DBG default: Exec #48: mount --mkdir -t tmpfs -o size=100m,nodev,mode=755 tmpfs /mnt/antiX/run
2023-07-27 20:29:09.958 DBG default: Exit #48: 0
2023-07-27 20:29:09.958 DBG default: Exec #49: mount --mkdir --rbind /run/udev /mnt/antiX/run/udev
2023-07-27 20:29:09.967 DBG default: Exit #49: 0
2023-07-27 20:29:09.977 DBG default: Desktop menu
2023-07-27 20:29:09.977 DBG default: Exec #50: chroot /mnt/antiX desktop-menu --write-out-global
2023-07-27 20:29:09.987 DBG default: SErr #50: "/usr/sbin/chroot: failed to run command \xE2\x80\x98""desktop-menu\xE2\x80\x99: No such file or directory\n"
2023-07-27 20:29:09.987 DBG default: Exit #50: 127
2023-07-27 20:29:09.987 DBG default: Exec #51: rm -rf /mnt/antiX/home/demo
2023-07-27 20:29:10.023 DBG default: Exit #51: 0
2023-07-27 20:29:10.023 DBG default: Change root: /mnt/antiX
2023-07-27 20:29:10.023 DBG default: Exec #52: rm /var/lib/dbus/machine-id /etc/machine-id
2023-07-27 20:29:10.058 DBG default: Exit #52: 0
2023-07-27 20:29:10.058 DBG default: Exec #53: dbus-uuidgen --ensure=/etc/machine-id
2023-07-27 20:29:10.116 DBG default: Exit #53: 0
2023-07-27 20:29:10.117 DBG default: Exec #54: dbus-uuidgen --ensure
2023-07-27 20:29:10.152 DBG default: Exit #54: 0
2023-07-27 20:29:10.152 DBG default: Change root: 
2023-07-27 20:29:10.152 DBG default: Bash #55: lspci -n | grep -qE '80ee:beef|80ee:cafe'
2023-07-27 20:29:10.209 DBG default: Exit #55: 1
2023-07-27 20:29:10.209 DBG default: Bash #56: mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-27 20:29:10.222 DBG default: Exit #56: 1
2023-07-27 20:29:10.223 DBG default: Bash #57: mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-27 20:29:10.235 DBG default: Exit #57: 1
2023-07-27 20:29:10.235 DBG default: Bash #58: mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-27 20:29:10.245 DBG default: Exit #58: 1
2023-07-27 20:29:10.245 DBG default: Bash #59: mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-27 20:29:10.254 DBG default: Exit #59: 1
2023-07-27 20:29:10.254 DBG default: Bash #60: mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1
2023-07-27 20:29:10.264 DBG default: Exit #60: 1
2023-07-27 20:29:10.264 DBG default: Bash #61: rmdir --ignore-fail-on-non-empty /mnt/antiX/media/sd*
2023-07-27 20:29:10.274 DBG default: SErr #61: "rmdir: failed to remove '/mnt/antiX/media/sd*': No such file or directory\n"
2023-07-27 20:29:10.274 DBG default: Exit #61: 1
2023-07-27 20:29:10.275 DBG default: Change root: /mnt/antiX
2023-07-27 20:29:10.275 DBG default: Set service: "acpid" true
2023-07-27 20:29:10.275 DBG default: Exec #62: update-rc.d acpid defaults
2023-07-27 20:29:10.412 DBG default: Exit #62: 0
2023-07-27 20:29:10.412 DBG default: Exec #63: systemctl unmask acpid
2023-07-27 20:29:10.446 DBG default: Exit #63: 0
2023-07-27 20:29:10.446 DBG default: Exec #64: systemctl enable acpid
2023-07-27 20:29:10.578 DBG default: SErr #64: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\nCreated symlink /etc/systemd/system/multi-user.target.wants/acpid.service \xE2\x86\x92 /lib/systemd/system/acpid.service.\n"
2023-07-27 20:29:10.578 DBG default: Exit #64: 0
2023-07-27 20:29:10.578 DBG default: Set service: "cpufrequtils" true
2023-07-27 20:29:10.578 DBG default: Exec #65: update-rc.d cpufrequtils defaults
2023-07-27 20:29:10.652 DBG default: Exit #65: 0
2023-07-27 20:29:10.652 DBG default: Exec #66: systemctl unmask cpufrequtils
2023-07-27 20:29:10.665 DBG default: Exit #66: 0
2023-07-27 20:29:10.665 DBG default: Exec #67: systemctl enable cpufrequtils
2023-07-27 20:29:10.802 DBG default: SErr #67: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2023-07-27 20:29:10.802 DBG default: Exit #67: 0
2023-07-27 20:29:10.802 DBG default: Set service: "dbus" true
2023-07-27 20:29:10.802 DBG default: Exec #68: update-rc.d dbus defaults
2023-07-27 20:29:10.866 DBG default: Exit #68: 0
2023-07-27 20:29:10.866 DBG default: Exec #69: systemctl unmask dbus
2023-07-27 20:29:10.880 DBG default: Exit #69: 0
2023-07-27 20:29:10.880 DBG default: Exec #70: systemctl enable dbus
2023-07-27 20:29:11.017 DBG default: SErr #70: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n  .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n  a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n  D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n  instance name specified.\n"
2023-07-27 20:29:11.017 DBG default: Exit #70: 0
2023-07-27 20:29:11.017 DBG default: Set service: "haveged" true
2023-07-27 20:29:11.017 DBG default: Exec #71: update-rc.d haveged defaults
2023-07-27 20:29:11.090 DBG default: Exit #71: 0
2023-07-27 20:29:11.090 DBG default: Exec #72: systemctl unmask haveged
2023-07-27 20:29:11.101 DBG default: Exit #72: 0
2023-07-27 20:29:11.101 DBG default: Exec #73: systemctl enable haveged
2023-07-27 20:29:11.239 DBG default: SErr #73: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2023-07-27 20:29:11.240 DBG default: Exit #73: 0
2023-07-27 20:29:11.240 DBG default: Set service: "saned" false
2023-07-27 20:29:11.240 DBG default: Exec #74: update-rc.d saned remove
2023-07-27 20:29:11.312 DBG default: Exit #74: 0
2023-07-27 20:29:11.312 DBG default: Exec #75: systemctl disable saned
2023-07-27 20:29:11.449 DBG default: SErr #75: "Synchronizing state of saned.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install disable saned\ninsserv: warning: current start runlevel(s) (empty) of script `saned' overrides LSB defaults (2 3 4 5).\ninsserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `saned' overrides LSB defaults (0 1 6).\nUnit /lib/systemd/system/saned.service is masked, ignoring.\n"
2023-07-27 20:29:11.449 DBG default: Exit #75: 0
2023-07-27 20:29:11.449 DBG default: Exec #76: systemctl mask saned
2023-07-27 20:29:11.460 DBG default: SErr #76: "Created symlink /etc/systemd/system/saned.service \xE2\x86\x92 /dev/null.\n"
2023-07-27 20:29:11.460 DBG default: Exit #76: 0
2023-07-27 20:29:11.460 DBG default: Set service: "smartmontools" true
2023-07-27 20:29:11.460 DBG default: Exec #77: update-rc.d smartmontools defaults
2023-07-27 20:29:11.523 DBG default: Exit #77: 0
2023-07-27 20:29:11.523 DBG default: Exec #78: systemctl unmask smartmontools
2023-07-27 20:29:11.537 DBG default: Exit #78: 0
2023-07-27 20:29:11.537 DBG default: Exec #79: systemctl enable smartmontools
2023-07-27 20:29:11.666 DBG default: SErr #79: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2023-07-27 20:29:11.666 DBG default: Exit #79: 0
2023-07-27 20:29:11.666 DBG default: Set service: "anacron" true
2023-07-27 20:29:11.666 DBG default: Exec #80: update-rc.d anacron defaults
2023-07-27 20:29:11.729 DBG default: Exit #80: 0
2023-07-27 20:29:11.729 DBG default: Exec #81: systemctl unmask anacron
2023-07-27 20:29:11.742 DBG default: Exit #81: 0
2023-07-27 20:29:11.743 DBG default: Exec #82: systemctl enable anacron
2023-07-27 20:29:11.880 DBG default: SErr #82: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2023-07-27 20:29:11.880 DBG default: Exit #82: 0
2023-07-27 20:29:11.881 DBG default: Set service: "cron" true
2023-07-27 20:29:11.881 DBG default: Exec #83: update-rc.d cron defaults
2023-07-27 20:29:11.946 DBG default: Exit #83: 0
2023-07-27 20:29:11.946 DBG default: Exec #84: systemctl unmask cron
2023-07-27 20:29:11.961 DBG default: Exit #84: 0
2023-07-27 20:29:11.961 DBG default: Exec #85: systemctl enable cron
2023-07-27 20:29:12.105 DBG default: SErr #85: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2023-07-27 20:29:12.105 DBG default: Exit #85: 0
2023-07-27 20:29:12.105 DBG default: Set service: "sudo" true
2023-07-27 20:29:12.106 DBG default: Exec #86: update-rc.d sudo defaults
2023-07-27 20:29:12.177 DBG default: Exit #86: 0
2023-07-27 20:29:12.177 DBG default: Exec #87: systemctl unmask sudo
2023-07-27 20:29:12.191 DBG default: Exit #87: 0
2023-07-27 20:29:12.192 DBG default: Exec #88: systemctl enable sudo
2023-07-27 20:29:12.337 DBG default: SErr #88: "Synchronizing state of sudo.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable sudo\nFailed to enable unit, unit /lib/systemd/system/sudo.service is masked.\n"
2023-07-27 20:29:12.337 DBG default: Exit #88: 1
2023-07-27 20:29:12.337 DBG default: Set service: "zramswap" false
2023-07-27 20:29:12.337 DBG default: Exec #89: update-rc.d zramswap remove
2023-07-27 20:29:12.413 DBG default: Exit #89: 0
2023-07-27 20:29:12.413 DBG default: Exec #90: systemctl disable zramswap
2023-07-27 20:29:12.549 DBG default: SErr #90: "Synchronizing state of zramswap.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install disable zramswap\ninsserv: warning: current start runlevel(s) (empty) of script `zramswap' overrides LSB defaults (2 3 4 5).\ninsserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `zramswap' overrides LSB defaults (0 1 6).\nUnit /etc/systemd/system/zramswap.service is masked, ignoring.\n"
2023-07-27 20:29:12.549 DBG default: Exit #90: 0
2023-07-27 20:29:12.549 DBG default: Exec #91: systemctl mask zramswap
2023-07-27 20:29:12.559 DBG default: Exit #91: 0
2023-07-27 20:29:12.559 DBG default: Set service: "bluetooth" false
2023-07-27 20:29:12.559 DBG default: Exec #92: update-rc.d bluetooth remove
2023-07-27 20:29:12.624 DBG default: Exit #92: 0
2023-07-27 20:29:12.624 DBG default: Exec #93: systemctl disable bluetooth
2023-07-27 20:29:12.792 DBG default: SErr #93: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install disable bluetooth\ninsserv: warning: current start runlevel(s) (empty) of script `bluetooth' overrides LSB defaults (2 3 4 5).\ninsserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `bluetooth' overrides LSB defaults (0 1 6).\nRemoved \"/etc/systemd/system/bluetooth.target.wants/bluetooth.service\".\nRemoved \"/etc/systemd/system/dbus-org.bluez.service\".\n"
2023-07-27 20:29:12.792 DBG default: Exit #93: 0
2023-07-27 20:29:12.792 DBG default: Exec #94: systemctl mask bluetooth
2023-07-27 20:29:12.807 DBG default: SErr #94: "Created symlink /etc/systemd/system/bluetooth.service \xE2\x86\x92 /dev/null.\n"
2023-07-27 20:29:12.807 DBG default: Exit #94: 0
2023-07-27 20:29:12.807 DBG default: Set service: "rsync" true
2023-07-27 20:29:12.807 DBG default: Exec #95: update-rc.d rsync defaults
2023-07-27 20:29:12.873 DBG default: Exit #95: 0
2023-07-27 20:29:12.873 DBG default: Exec #96: systemctl unmask rsync
2023-07-27 20:29:12.888 DBG default: Exit #96: 0
2023-07-27 20:29:12.888 DBG default: Exec #97: systemctl enable rsync
2023-07-27 20:29:13.020 DBG default: SErr #97: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\nCreated symlink /etc/systemd/system/multi-user.target.wants/rsync.service \xE2\x86\x92 /lib/systemd/system/rsync.service.\n"
2023-07-27 20:29:13.020 DBG default: Exit #97: 0
2023-07-27 20:29:13.020 DBG default: Set service: "cups" false
2023-07-27 20:29:13.020 DBG default: Exec #98: update-rc.d cups remove
2023-07-27 20:29:13.090 DBG default: Exit #98: 0
2023-07-27 20:29:13.090 DBG default: Exec #99: systemctl disable cups
2023-07-27 20:29:13.234 DBG default: SErr #99: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install disable cups\ninsserv: warning: current start runlevel(s) (empty) of script `cups' overrides LSB defaults (2 3 4 5).\ninsserv: warning: current stop runlevel(s) (1 2 3 4 5) of script `cups' overrides LSB defaults (1).\nRemoved \"/etc/systemd/system/multi-user.target.wants/cups.path\".\nRemoved \"/etc/systemd/system/multi-user.target.wants/cups.service\".\nRemoved \"/etc/systemd/system/printer.target.wants/cups.service\".\nRemoved \"/etc/systemd/system/sockets.target.wants/cups.socket\".\n"
2023-07-27 20:29:13.234 DBG default: Exit #99: 0
2023-07-27 20:29:13.234 DBG default: Exec #100: systemctl mask cups
2023-07-27 20:29:13.248 DBG default: SErr #100: "Created symlink /etc/systemd/system/cups.service \xE2\x86\x92 /dev/null.\n"
2023-07-27 20:29:13.248 DBG default: Exit #100: 0
2023-07-27 20:29:13.248 DBG default: Set service: "smbd" true
2023-07-27 20:29:13.248 DBG default: Exec #101: update-rc.d smbd defaults
2023-07-27 20:29:13.322 DBG default: Exit #101: 0
2023-07-27 20:29:13.322 DBG default: Exec #102: systemctl unmask smbd
2023-07-27 20:29:13.334 DBG default: Exit #102: 0
2023-07-27 20:29:13.334 DBG default: Exec #103: systemctl enable smbd
2023-07-27 20:29:13.472 DBG default: SErr #103: "Synchronizing state of smbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smbd\n"
2023-07-27 20:29:13.472 DBG default: Exit #103: 0
2023-07-27 20:29:13.473 DBG default: Set service: "nmbd" true
2023-07-27 20:29:13.473 DBG default: Exec #104: update-rc.d nmbd defaults
2023-07-27 20:29:13.536 DBG default: Exit #104: 0
2023-07-27 20:29:13.536 DBG default: Exec #105: systemctl unmask nmbd
2023-07-27 20:29:13.548 DBG default: Exit #105: 0
2023-07-27 20:29:13.548 DBG default: Exec #106: systemctl enable nmbd
2023-07-27 20:29:13.678 DBG default: SErr #106: "Synchronizing state of nmbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable nmbd\n"
2023-07-27 20:29:13.678 DBG default: Exit #106: 0
2023-07-27 20:29:13.678 DBG default: Set service: "samba-ad-dc" true
2023-07-27 20:29:13.679 DBG default: Exec #107: update-rc.d samba-ad-dc defaults
2023-07-27 20:29:13.756 DBG default: Exit #107: 0
2023-07-27 20:29:13.756 DBG default: Exec #108: systemctl unmask samba-ad-dc
2023-07-27 20:29:13.768 DBG default: Exit #108: 0
2023-07-27 20:29:13.768 DBG default: Exec #109: systemctl enable samba-ad-dc
2023-07-27 20:29:13.904 DBG default: SErr #109: "Synchronizing state of samba-ad-dc.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable samba-ad-dc\n"
2023-07-27 20:29:13.904 DBG default: Exit #109: 0
2023-07-27 20:29:13.904 DBG default: Change root: 
2023-07-27 20:29:13.904 DBG default: Exec #110: sed -i s/WORKGROUP/Workgroup/g /mnt/antiX/etc/samba/smb.conf
2023-07-27 20:29:13.915 DBG default: Exit #110: 0
2023-07-27 20:29:13.915 DBG default: Bash #111: sed -i 's/'"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')"'/MXine/' /mnt/antiX/etc/hosts
2023-07-27 20:29:13.952 DBG default: Exit #111: 0
2023-07-27 20:29:13.952 DBG default: Bash #112: echo "MXine" | cat > /mnt/antiX/etc/hostname
2023-07-27 20:29:13.963 DBG default: Exit #112: 0
2023-07-27 20:29:13.963 DBG default: Bash #113: echo "MXine" | cat > /mnt/antiX/etc/mailname
2023-07-27 20:29:13.973 DBG default: Exit #113: 0
2023-07-27 20:29:13.973 DBG default: Bash #114: sed -i 's/.*send host-name.*/send host-name "MXine";/g' /mnt/antiX/etc/dhcp/dhclient.conf
2023-07-27 20:29:13.982 DBG default: Exit #114: 0
2023-07-27 20:29:13.982 DBG default: Bash #115: echo "MXine" | cat > /mnt/antiX/etc/defaultdomain
2023-07-27 20:29:13.994 DBG default: Exit #115: 0
2023-07-27 20:29:13.994 DBG default: << void Oobe::setLocale() >>
2023-07-27 20:29:13.994 DBG default: Update locale
2023-07-27 20:29:13.994 DBG default: Bash #116: chroot /mnt/antiX /usr/sbin/update-locale "LANG=en_US.UTF-8"
2023-07-27 20:29:14.037 DBG default: Exit #116: 0
2023-07-27 20:29:14.037 DBG default: Exec #117: ln -nfs /usr/share/zoneinfo/Europe/Lisbon /mnt/antiX/etc/localtime
2023-07-27 20:29:14.047 DBG default: Exit #117: 0
2023-07-27 20:29:14.047 DBG default: Exec #118: ln -nfs /usr/share/zoneinfo/Europe/Lisbon /etc/localtime
2023-07-27 20:29:14.054 DBG default: Exit #118: 0
2023-07-27 20:29:14.055 DBG default: Bash #119: echo Europe/Lisbon > /mnt/antiX/etc/timezone
2023-07-27 20:29:14.060 DBG default: Exit #119: 0
2023-07-27 20:29:14.061 DBG default: Bash #120: echo Europe/Lisbon > /etc/timezone
2023-07-27 20:29:14.067 DBG default: Exit #120: 0
2023-07-27 20:29:14.067 DBG default: Bash #121: echo '0.0 0 0.0
0
LOCAL' > /etc/adjtime
2023-07-27 20:29:14.073 DBG default: Exit #121: 0
2023-07-27 20:29:14.073 DBG default: Exec #122: hwclock --hctosys
2023-07-27 19:29:15.001 DBG default: Exit #122: 0
2023-07-27 19:29:15.001 DBG default: Exec #123: cp -f /etc/adjtime /mnt/antiX/etc/
2023-07-27 19:29:15.011 DBG default: Exit #123: 0
2023-07-27 19:29:15.011 DBG default: Exec #124: cp -f /etc/default/rcS /mnt/antiX/etc/default
2023-07-27 19:29:15.020 DBG default: Exit #124: 0
2023-07-27 19:29:15.020 DBG default: Bash #125: sed -i '/data0=/c\data0=%H:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2023-07-27 19:29:15.030 DBG default: SErr #125: "sed: can't read /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2023-07-27 19:29:15.030 DBG default: Exit #125: 2
2023-07-27 19:29:15.030 DBG default: Bash #126: sed -i '/data0=/c\data0=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2023-07-27 19:29:15.041 DBG default: SErr #126: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2023-07-27 19:29:15.041 DBG default: Exit #126: 2
2023-07-27 19:29:15.041 DBG default: Bash #127: sed -i '/time_format=/c\time_format=%H:%M' /home/demo/.config/xfce4/panel/datetime-1.rc
2023-07-27 19:29:15.050 DBG default: SErr #127: "sed: can't read /home/demo/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2023-07-27 19:29:15.050 DBG default: Exit #127: 2
2023-07-27 19:29:15.050 DBG default: Bash #128: sed -i '/time_format=/c\time_format=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc
2023-07-27 19:29:15.061 DBG default: SErr #128: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2023-07-27 19:29:15.061 DBG default: Exit #128: 2
2023-07-27 19:29:15.061 DBG default: Bash #129: sed -i 's/%l/%H/' /home/demo/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
2023-07-27 19:29:15.070 DBG default: Exit #129: 0
2023-07-27 19:29:15.070 DBG default: Bash #130: sed -i 's/%l/%H/' /mnt/antiX/etc/skel/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
2023-07-27 19:29:15.087 DBG default: Exit #130: 0
2023-07-27 19:29:15.087 DBG default: Bash #131: sed -i '/use24hFormat=/c\use24hFormat=2' /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc
2023-07-27 19:29:15.099 DBG default: SErr #131: "sed: can't read /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2023-07-27 19:29:15.099 DBG default: Exit #131: 2
2023-07-27 19:29:15.099 DBG default: Bash #132: sed -i '/use24hFormat=/c\use24hFormat=2' /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc
2023-07-27 19:29:15.109 DBG default: SErr #132: "sed: can't read /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2023-07-27 19:29:15.109 DBG default: Exit #132: 2
2023-07-27 19:29:15.109 DBG default: Bash #133: sed -i '/time1_format/c\time1_format=%H:%M' /mnt/antiX/etc/skel/.config/tint2/tint2rc
2023-07-27 19:29:15.118 DBG default: SErr #133: "sed: can't read /mnt/antiX/etc/skel/.config/tint2/tint2rc: No such file or directory\n"
2023-07-27 19:29:15.119 DBG default: Exit #133: 2
2023-07-27 19:29:15.119 DBG default: Bash #134: sed -i '/time1_format/c\time1_format=%H:%M' /home/demo/.config/tint2/tint2rc
2023-07-27 19:29:15.129 DBG default: SErr #134: "sed: can't read /home/demo/.config/tint2/tint2rc: No such file or directory\n"
2023-07-27 19:29:15.129 DBG default: Exit #134: 2
2023-07-27 19:29:15.130 DBG default: Bash #135: sed -i 's/%H:%M/%H:%M/g' /mnt/antiX/etc/skel/.icewm/preferences
2023-07-27 19:29:15.140 DBG default: SErr #135: "sed: can't read /mnt/antiX/etc/skel/.icewm/preferences: No such file or directory\n"
2023-07-27 19:29:15.140 DBG default: Exit #135: 2
2023-07-27 19:29:15.140 DBG default: Bash #136: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.fluxbox/init
2023-07-27 19:29:15.147 DBG default: SErr #136: "sed: can't read /mnt/antiX/etc/skel/.fluxbox/init: No such file or directory\n"
2023-07-27 19:29:15.147 DBG default: Exit #136: 2
2023-07-27 19:29:15.147 DBG default: Bash #137: sed -i 's/%H:%M/%k:%M/g' /mnt/antiX/etc/skel/.jwm/tray
2023-07-27 19:29:15.153 DBG default: SErr #137: "sed: can't read /mnt/antiX/etc/skel/.jwm/tray: No such file or directory\n"
2023-07-27 19:29:15.154 DBG default: Exit #137: 2
2023-07-27 19:29:15.154 DBG default: Localize repo
2023-07-27 19:29:15.154 DBG default: Exec #138: chroot /mnt/antiX localize-repo default
2023-07-27 19:29:15.217 DBG default: Exit #138: 0
2023-07-27 19:29:15.217 DBG default: Change root: /mnt/antiX
2023-07-27 19:29:15.217 DBG default: Exec #139: chpasswd
2023-07-27 19:29:15.315 DBG default: Exit #139: 0
2023-07-27 19:29:15.315 DBG default: Change root: 
2023-07-27 19:29:15.315 DBG default: Exec #140: sync
2023-07-27 19:29:15.495 DBG default: Exit #140: 0
2023-07-27 19:29:15.495 DBG default: check for remastered home demo folder: false
2023-07-27 19:29:15.495 DBG default: Exec #141: cp -n /mnt/antiX/etc/skel/.bash_profile /mnt/antiX/home/alien
2023-07-27 19:29:15.501 DBG default: SErr #141: "/usr/bin/cp: cannot stat '/mnt/antiX/etc/skel/.bash_profile': No such file or directory\n"
2023-07-27 19:29:15.502 DBG default: Exit #141: 1
2023-07-27 19:29:15.502 DBG default: Exec #142: cp -n /mnt/antiX/etc/skel/.bashrc /mnt/antiX/home/alien
2023-07-27 19:29:15.509 DBG default: Exit #142: 0
2023-07-27 19:29:15.509 DBG default: Exec #143: cp -n /mnt/antiX/etc/skel/.gtkrc /mnt/antiX/home/alien
2023-07-27 19:29:15.514 DBG default: SErr #143: "/usr/bin/cp: cannot stat '/mnt/antiX/etc/skel/.gtkrc': No such file or directory\n"
2023-07-27 19:29:15.514 DBG default: Exit #143: 1
2023-07-27 19:29:15.514 DBG default: Exec #144: cp -n /mnt/antiX/etc/skel/.gtkrc-2.0 /mnt/antiX/home/alien
2023-07-27 19:29:15.521 DBG default: SErr #144: "/usr/bin/cp: cannot stat '/mnt/antiX/etc/skel/.gtkrc-2.0': No such file or directory\n"
2023-07-27 19:29:15.521 DBG default: Exit #144: 1
2023-07-27 19:29:15.521 DBG default: Exec #145: cp -Rn /mnt/antiX/etc/skel/.config /mnt/antiX/home/alien
2023-07-27 19:29:15.534 DBG default: SErr #145: "/usr/bin/cp: not writing through dangling symlink '/mnt/antiX/home/alien/.config/xfce4/desktop/icons.screen.latest.rc'\n"
2023-07-27 19:29:15.534 DBG default: Exit #145: 1
2023-07-27 19:29:15.534 DBG default: Exec #146: cp -Rn /mnt/antiX/etc/skel/.local /mnt/antiX/home/alien
2023-07-27 19:29:15.543 DBG default: Exit #146: 0
2023-07-27 19:29:15.543 DBG default: Exec #147: chown -R demo:demo /mnt/antiX/home/alien
2023-07-27 19:29:16.507 DBG default: Exit #147: 0
2023-07-27 19:29:16.508 DBG default: Exec #148: sed -i s/demo/alien/g /mnt/antiX/etc/group
2023-07-27 19:29:47.238 DBG default: Exit #148: 0
2023-07-27 19:29:47.239 DBG default: Exec #149: sed -i s/demo/alien/g /mnt/antiX/etc/gshadow
2023-07-27 19:29:47.248 DBG default: Exit #149: 0
2023-07-27 19:29:47.249 DBG default: Exec #150: sed -i s/demo/alien/g /mnt/antiX/etc/passwd
2023-07-27 19:29:47.254 DBG default: Exit #150: 0
2023-07-27 19:29:47.254 DBG default: Exec #151: sed -i s/demo/alien/g /mnt/antiX/etc/shadow
2023-07-27 19:29:47.259 DBG default: Exit #151: 0
2023-07-27 19:29:47.259 DBG default: Exec #152: sed -i s/demo/alien/g /mnt/antiX/etc/subuid
2023-07-27 19:29:47.267 DBG default: Exit #152: 0
2023-07-27 19:29:47.267 DBG default: Exec #153: sed -i s/demo/alien/g /mnt/antiX/etc/subgid
2023-07-27 19:29:47.274 DBG default: Exit #153: 0
2023-07-27 19:29:47.275 DBG default: Exec #154: sed -i s/demo/alien/g /mnt/antiX/etc/slim.conf
2023-07-27 19:29:47.282 DBG default: SErr #154: "/usr/bin/sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2023-07-27 19:29:47.282 DBG default: Exit #154: 2
2023-07-27 19:29:47.283 DBG default: Exec #155: sed -i s/demo/alien/g /mnt/antiX/etc/lightdm/lightdm.conf
2023-07-27 19:29:47.291 DBG default: Exit #155: 0
2023-07-27 19:29:47.291 DBG default: Exec #156: sed -i s/demo/alien/g /mnt/antiX/home/*/.gtkrc-2.0
2023-07-27 19:29:47.299 DBG default: SErr #156: "/usr/bin/sed: can't read /mnt/antiX/home/*/.gtkrc-2.0: No such file or directory\n"
2023-07-27 19:29:47.299 DBG default: Exit #156: 2
2023-07-27 19:29:47.299 DBG default: Exec #157: sed -i s/demo/alien/g /mnt/antiX/root/.gtkrc-2.0
2023-07-27 19:29:47.304 DBG default: SErr #157: "/usr/bin/sed: can't read /mnt/antiX/root/.gtkrc-2.0: No such file or directory\n"
2023-07-27 19:29:47.304 DBG default: Exit #157: 2
2023-07-27 19:29:47.304 DBG default: Exec #158: sed -i s/#auto_login/auto_login/g /mnt/antiX/etc/slim.conf
2023-07-27 19:29:47.312 DBG default: SErr #158: "/usr/bin/sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2023-07-27 19:29:47.312 DBG default: Exit #158: 2
2023-07-27 19:29:47.312 DBG default: Exec #159: sed -i "s/#default_user /default_user /g" /mnt/antiX/etc/slim.conf
2023-07-27 19:29:47.319 DBG default: SErr #159: "/usr/bin/sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2023-07-27 19:29:47.319 DBG default: Exit #159: 2
2023-07-27 19:29:47.319 DBG default: Exec #160: sed -i s/User=/User=alien/g /mnt/antiX/etc/sddm.conf
2023-07-27 19:29:47.325 DBG default: SErr #160: "/usr/bin/sed: can't read /mnt/antiX/etc/sddm.conf: No such file or directory\n"
2023-07-27 19:29:47.326 DBG default: Exit #160: 2
2023-07-27 19:29:47.326 DBG default: Exec #161: touch /mnt/antiX/var/mail/alien
2023-07-27 19:29:47.333 DBG default: Exit #161: 0
2023-07-27 19:29:47.359 DBG default: Exec #162: sync
2023-07-27 19:29:47.398 DBG default: Exit #162: 0
2023-07-27 19:29:47.399 DBG default: << void SwapMan::install(QStringList&) >>
2023-07-27 19:29:47.411 DBG default: ++ Creating swap file ++
2023-07-27 19:29:47.415 DBG default: MkPath(SUCCESS): "/mnt/antiX/swap"
2023-07-27 19:29:47.415 DBG default: Exec #163: truncate --size=0 /mnt/antiX/swap/swap
2023-07-27 19:29:47.422 DBG default: Exit #163: 0
2023-07-27 19:29:47.422 DBG default: Exec #164: chattr +C /mnt/antiX/swap/swap
2023-07-27 19:29:47.429 DBG default: Exit #164: 0
2023-07-27 19:29:47.430 DBG default: Exec #165: fallocate -l 4096M /mnt/antiX/swap/swap
2023-07-27 19:29:47.462 DBG default: Exit #165: 0
2023-07-27 19:29:47.462 DBG default: Exec #166: mkswap -q /mnt/antiX/swap/swap
2023-07-27 19:29:47.502 DBG default: Exit #166: 0
2023-07-27 19:29:47.502 DBG default: ++ Configuring swap file ++
2023-07-27 19:29:47.504 DBG default: << void BootMan::install(const QStringList&) >>
2023-07-27 19:29:47.514 DBG default: Bash #167: ls /mnt/antiX/boot | grep 'initrd.img-3.6'
2023-07-27 19:29:47.524 DBG default: Exit #167: 1
2023-07-27 19:29:47.524 DBG default: Exec #168: mountpoint -q /sys/firmware/efi/efivars
2023-07-27 19:29:47.531 DBG default: Exit #168: 0
2023-07-27 19:29:47.531 DBG default: ++ Installing GRUB ++
2023-07-27 19:29:47.532 DBG default: Exec #169: cat /sys/firmware/efi/fw_platform_size
2023-07-27 19:29:47.537 DBG default: Exit #169: 0
2023-07-27 19:29:47.537 DBG default: Bash #170: ls /sys/firmware/efi/efivars | grep dump
2023-07-27 19:29:47.546 DBG default: Exit #170: 1
2023-07-27 19:29:47.546 DBG default: Change root: /mnt/antiX
2023-07-27 19:29:47.547 DBG default: Exec #171: grub-install --no-nvram --force-extra-removable --target=x86_64-efi --bootloader-id=MX --recheck
2023-07-27 19:29:47.568 DBG default: SErr #171: "Installing for x86_64-efi platform.\n/usr/sbin/grub-install: error: cannot find EFI directory.\n"
2023-07-27 19:29:47.568 DBG default: Exit #171: 1
2023-07-27 19:29:47.568 DBG default: Revert root: 
2023-07-27 19:29:47.568 DBG default: -- FAILED Phase 4 - GRUB installation failed. You can reboot to the live medium and use the GRUB Rescue menu to repair the installation. --
2023-07-27 19:29:47.607 DBG default: << void MProcess::halt(bool) >>
2023-07-27 19:29:47.633 DBG default: << void MInstall::cleanup() >>
2023-07-27 19:29:47.633 DBG default: Configuration: /mnt/antiX/etc/minstall.conf
2023-07-27 19:29:47.633 DBG default:  - Product: MX Linux 23
2023-07-27 19:29:47.633 DBG default:  - Version: 23.7.13mx23
2023-07-27 19:29:47.633 DBG default:  = GRUB:
2023-07-27 19:29:47.633 DBG default:    - Install: true
2023-07-27 19:29:47.633 DBG default:    - TargetType: ESP
2023-07-27 19:29:47.633 DBG default:  = Localization:
2023-07-27 19:29:47.633 DBG default:    - ClockHours: 24
2023-07-27 19:29:47.633 DBG default:    - LocalClock: true
2023-07-27 19:29:47.633 DBG default:    - Locale: en_US.UTF-8
2023-07-27 19:29:47.633 DBG default:    - Timezone: Europe/Lisbon
2023-07-27 19:29:47.633 DBG default:  = Network:
2023-07-27 19:29:47.633 DBG default:    - ComputerName: MXine
2023-07-27 19:29:47.633 DBG default:    - Domain: example.dom
2023-07-27 19:29:47.633 DBG default:    - Samba: true
2023-07-27 19:29:47.633 DBG default:    - Workgroup: Workgroup
2023-07-27 19:29:47.633 DBG default:  = Services:
2023-07-27 19:29:47.633 DBG default:    - acpid: true
2023-07-27 19:29:47.633 DBG default:    - anacron: true
2023-07-27 19:29:47.633 DBG default:    - bluetooth: false
2023-07-27 19:29:47.634 DBG default:    - cpufrequtils: true
2023-07-27 19:29:47.634 DBG default:    - cron: true
2023-07-27 19:29:47.634 DBG default:    - cups: false
2023-07-27 19:29:47.634 DBG default:    - dbus: true
2023-07-27 19:29:47.634 DBG default:    - haveged: true
2023-07-27 19:29:47.634 DBG default:    - rsync: true
2023-07-27 19:29:47.634 DBG default:    - saned: false
2023-07-27 19:29:47.634 DBG default:    - smartmontools: true
2023-07-27 19:29:47.634 DBG default:    - sudo: true
2023-07-27 19:29:47.634 DBG default:    - zramswap: false
2023-07-27 19:29:47.634 DBG default:  = Storage:
2023-07-27 19:29:47.634 DBG default:    - Target: Partitions
2023-07-27 19:29:47.634 DBG default:  = Storage.Virtual Devices.Partition1:
2023-07-27 19:29:47.634 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.634 DBG default:    - Dump: false
2023-07-27 19:29:47.634 DBG default:    - Encrypt: false
2023-07-27 19:29:47.634 DBG default:    - Pass: 0
2023-07-27 19:29:47.634 DBG default:    - Size: 2191523840
2023-07-27 19:29:47.634 DBG default:  = Storage.sda.Partition1:
2023-07-27 19:29:47.634 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.634 DBG default:    - Dump: false
2023-07-27 19:29:47.634 DBG default:    - ESP: true
2023-07-27 19:29:47.634 DBG default:    - Encrypt: false
2023-07-27 19:29:47.634 DBG default:    - Pass: 0
2023-07-27 19:29:47.634 DBG default:    - Size: 104857600
2023-07-27 19:29:47.634 DBG default:  = Storage.sda.Partition2:
2023-07-27 19:29:47.634 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.634 DBG default:    - Dump: false
2023-07-27 19:29:47.634 DBG default:    - Encrypt: false
2023-07-27 19:29:47.634 DBG default:    - Pass: 0
2023-07-27 19:29:47.634 DBG default:    - Size: 16777216
2023-07-27 19:29:47.634 DBG default:  = Storage.sda.Partition3:
2023-07-27 19:29:47.634 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.634 DBG default:    - Dump: false
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Pass: 0
2023-07-27 19:29:47.635 DBG default:    - Size: 1784717246464
2023-07-27 19:29:47.635 DBG default:  = Storage.sda.Partition4:
2023-07-27 19:29:47.635 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.635 DBG default:    - Dump: false
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Pass: 0
2023-07-27 19:29:47.635 DBG default:    - Size: 624951296
2023-07-27 19:29:47.635 DBG default:  = Storage.sda.Partition5:
2023-07-27 19:29:47.635 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.635 DBG default:    - Dump: true
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Format: PRESERVE
2023-07-27 19:29:47.635 DBG default:    - Label: rootMX
2023-07-27 19:29:47.635 DBG default:    - Options: noatime
2023-07-27 19:29:47.635 DBG default:    - Pass: 1
2023-07-27 19:29:47.635 DBG default:    - Size: 214915088384
2023-07-27 19:29:47.635 DBG default:    - UseFor: /
2023-07-27 19:29:47.635 DBG default:  = Storage.sdb.Partition1:
2023-07-27 19:29:47.635 DBG default:    - Active: true
2023-07-27 19:29:47.635 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.635 DBG default:    - Dump: false
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Pass: 0
2023-07-27 19:29:47.635 DBG default:    - Size: 36875272192
2023-07-27 19:29:47.635 DBG default:  = Storage.sdb.Partition2:
2023-07-27 19:29:47.635 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.635 DBG default:    - Dump: false
2023-07-27 19:29:47.635 DBG default:    - ESP: true
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Pass: 0
2023-07-27 19:29:47.635 DBG default:    - Size: 33554432
2023-07-27 19:29:47.635 DBG default:  = Storage.sdb.Partition3:
2023-07-27 19:29:47.636 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.636 DBG default:    - Dump: false
2023-07-27 19:29:47.636 DBG default:    - Encrypt: false
2023-07-27 19:29:47.636 DBG default:    - Pass: 0
2023-07-27 19:29:47.636 DBG default:    - Size: 214748364800
2023-07-27 19:29:47.636 DBG default:  = Swap:
2023-07-27 19:29:47.636 DBG default:    - File: /swap/swap
2023-07-27 19:29:47.636 DBG default:    - Hibernation: false
2023-07-27 19:29:47.636 DBG default:    - Install: true
2023-07-27 19:29:47.636 DBG default:    - Size: 4096
2023-07-27 19:29:47.636 DBG default:  = User:
2023-07-27 19:29:47.636 DBG default:    - Autologin: true
2023-07-27 19:29:47.636 DBG default:    - EnableRoot: true
2023-07-27 19:29:47.636 DBG default:    - OldHomeAction: Use
2023-07-27 19:29:47.636 DBG default:    - SaveDesktop: false
2023-07-27 19:29:47.636 DBG default:    - Username: alien
2023-07-27 19:29:47.636 DBG default: End of configuration.
2023-07-27 19:29:47.637 DBG default: Exec #172: rm -rf /mnt/antiX/mnt/antiX
2023-07-27 19:29:47.657 DBG default: Exit #172: 0
2023-07-27 19:29:47.657 DBG default: Exec #173: swapon --show=NAME --noheadings
2023-07-27 19:29:47.668 DBG default: Exit #173: 0
2023-07-27 19:29:47.669 DBG default: Exec #174: umount -qR /mnt/antiX
2023-07-27 19:29:49.276 DBG default: Exit #174: 0
2023-07-27 19:29:49.276 DBG default: << void MInstall::setupAutoMount(bool) >>
2023-07-27 19:29:49.277 DBG default: Bash #175: ps -e | grep 'udisksd'
2023-07-27 19:29:49.303 DBG default: SOut #175: "   4957 ?        00:00:00 udisksd\n"
2023-07-27 19:29:49.303 DBG default: Exit #175: 0
2023-07-27 19:29:49.303 DBG default: Bash #176: grep -El '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d/*
2023-07-27 19:29:49.312 DBG default: Exit #176: 0
2023-07-27 19:29:49.312 DBG default: Exec #177: rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules
2023-07-27 19:29:49.327 DBG default: Exit #177: 0
2023-07-27 19:29:49.327 DBG default: Exec #178: udevadm control --reload
2023-07-27 19:29:49.370 DBG default: Exit #178: 0
2023-07-27 19:29:49.370 DBG default: Exec #179: service udev stop
2023-07-27 19:29:49.423 DBG default: SOut #179: "Stopping hotplug events dispatcher: systemd-udevd.\n"
2023-07-27 19:29:49.423 DBG default: Exit #179: 0
2023-07-27 19:29:49.423 DBG default: Exec #180: service udev start
2023-07-27 19:29:51.651 DBG default: SOut #180: "Starting hotplug events dispatcher: systemd-udevd.\nSynthesizing the initial hotplug events (subsystems)...done.\nSynthesizing the initial hotplug events (devices)...done.\nWaiting for /dev to be fully populated...done.\n"
2023-07-27 19:29:51.651 DBG default: Exit #180: 0
2023-07-27 19:29:51.651 DBG default: Bash #181: rm -f /run/udev/rules.d/64-md-raid-assembly.rules
2023-07-27 19:29:51.658 DBG default: Exit #181: 0
I had to recover it twice (from live media):
first I tried mx boot repair with no results (I'm using UEFI on ESP partition)
then I booted live media and tried first mx boot options, and then mx boot repair with optimal results! (I can't say if doing it twice with mx boot repair would crack it now...)
Congrats on making it thru the install anyway! :)
@doodstecsonhere

Eheheh...
I must say it's a pleasure to be part of this amazing journey, this is my favourite distro ever!
Hard as hell, but never frustrated! Amazing community!
If I was on windows forums I would have quited a while ago. This feels like we're part of it!
I can't bring a lot to the game but it's always a pleasure to read all the stuff and try until we get it!
Thanks to all, and the amazing mods and devs in particular!
I use Win10 / 11 each day less, and I find the right tools nowadays to use Linux on a daily basis...
ThaNKS!!!!
ASUS Laptop N56VB 1080p
i7-3630QM 2.40GHz Ivy Bridge
16GB DDR3 1600 MHz
2TB HW/SSD RAID-0 SATA3
Intel HD4000 IVB GT2
NVIDIA GK107M GeForce GT-740M 2GB VRAM
Intel Centrino WiFi-N 2230
Qualcomm Atheros AR8161 Gigabit
Intel 7 C210/C216/HM76 Express Chipset
Top
jesito
Posts: 7
Joined: Fri Apr 16, 2021 4:38 pm

MX-23 RC3 (Xfce) Feedback thread

#105 Post by jesito »

Just a silly question:

I installed RC2 a few days ago. Today I went to the apt update and got a lot of updates.
Does this mean I'm on the RC3 with all these updates, or should I install RC3 from fresh?.
Thanks in advance!!

Jes.
Top
User avatar
AlphaElwedritsch
Posts: 54
Joined: Fri Apr 28, 2023 5:49 am

Re: MX-23 RC3 (Xfce) Feedback thread

#106 Post by AlphaElwedritsch »

jesito wrote: Sat Jul 29, 2023 3:01 am Just a silly question:

I installed RC2 a few days ago. Today I went to the apt update and got a lot of updates.
Does this mean I'm on the RC3 with all these updates, or should I install RC3 from fresh?.
Thanks in advance!!

Jes.
that's a really good question
QSI shows always the initially installed version

is there a posibility to see what version is actually running, not initially installed?
if the switch from RC to final went smooth. the upcomming point releases....etc...to see if the system is on latest version
Top
User avatar
argonaut459
Posts: 508
Joined: Tue Oct 04, 2022 11:49 am

Re: MX-23 RC3 (Xfce) Feedback thread

#107 Post by argonaut459 »

Good afternoon.
Saw an update today, expected to have a working wifi after that. And sure it is, thank you.
Wifi was recognized mere seconds after booting, putting in my credentials and right away stable connection. Haven't seen such a quick connect down to the fritzbox ever. I'm very suprised.

Yet, there is still an issue:
During the update, screen went dark, maybe some kind of hibernate or such as the time thresholds for the energy management were reached. All good, thats what supposed to happen.

Waking up, shaking USB mouse didn't work - hence I suspect some kind of hibernation.
Pressed right arrow button, laptop woke up, and showed the window of MXPI updater filling with some weird characters - if I recall correct it was something like [[A'
screenfilled quickly with these, till i pressed the left button. one other character appeared and it stopped.
The update went on as expected from there on.

Had that happen a few days ago, too. Than my text document was being filled with "enter" keys. pressing some random other buttons made it stop eventually.

Code: Select all

System:
  Kernel: 6.4.6-1-liquorix-amd64 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable hpet=disable rcupdate.rcu_expedited=1
    BOOT_IMAGE=/boot/vmlinuz-6.4.6-1-liquorix-amd64 root=UUID=<filter> ro quiet splash
    resume=UUID=<filter> resume_offset=739328
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel, plank wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_ahs_RC3_x64 Libretto July 24  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: THOMSON product: GENEO14C-4WH128 v: N/A serial: <superuser required>
  Mobo: Eii model: G116X1_1 serial: <superuser required> UEFI: American Megatrends
    v: E.G116X1_1_6.S4.E1.039 date: 07/28/2021
Battery:
  ID-1: BAT0 charge: 29.3 Wh (96.4%) condition: 30.4/30.4 Wh (100.0%) volts: 7.6 min: N/A
    model: GLK MRD Li-ion Battery type: Li-ion serial: <filter> status: discharging
CPU:
  Info: model: Intel Celeron N4020 bits: 64 type: MCP arch: Goldmont Plus level: v2 built: 2017
    process: Intel 14nm family: 6 model-id: 0x7A (122) stepping: 8 microcode: 0x22
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 112 KiB desc: d-2x24 KiB; i-2x32 KiB
    L2: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 895 min/max: 800/1101 boost: enabled scaling: driver: acpi-cpufreq
    governor: ondemand cores: 1: 895 2: 895 bogomips: 4377
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 status: Vulnerable: eIBRS with unprivileged eBPF
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel GeminiLake [UHD Graphics 600] driver: i915 v: kernel arch: Gen-9
    process: Intel 14n built: 2015-16 ports: active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:3185 class-ID: 0300
  Device-2: icSpring camera type: USB driver: uvcvideo bus-ID: 1-7:4 chip-ID: 32e6:9005
    class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31")
  Monitor-1: eDP-1 model-id: CS_ 0x5211 serial: <filter> built: 2013 res: 1366x768 hz: 60 dpi: 67
    gamma: 1.2 size: 518x333mm (20.39x13.11") diag: 519mm (20.4") ratio: 3:2 modes: 1366x768
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel UHD Graphics 600 (GLK 2) direct-render: Yes
Audio:
  Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio
    driver: sof-audio-pci-intel-apl alternate: snd_hda_intel, snd_soc_skl, snd_soc_avs,
    snd_sof_pci_intel_apl bus-ID: 00:0e.0 chip-ID: 8086:3198 class-ID: 0401
  API: ALSA v: k6.4.6-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Message: No PCI device data found.
  IF-ID-1: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Realtek 802.11ac NIC type: USB driver: btusb,rtw_8821cu bus-ID: 1-4:3
    chip-ID: 0bda:c820 class-ID: e001 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: f098 hci-v: 4.2 rev: 75b8
  Info: acl-mtu: 1021:8 sco-mtu: 255:12 link-policy: rswitch hold sniff park
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 472.95 GiB used: 15.94 GiB (3.4%)
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: Generic model: SLD128 size: 115.23 GiB block-size:
    physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 0x8 scheme: GPT
  SMART Message: Unknown smartctl error. Unable to generate data.
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-2: /dev/sda maj-min: 8:0 vendor: Intenso model: N/A size: 119.24 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 9A0 scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Seagate model: BUP Ultra Touch size: 238.47 GiB
    block-size: physical: 4096 B logical: 512 B type: N/A serial: <filter> rev: 1707 scheme: GPT
Partition:
  ID-1: / raw-size: 71.47 GiB size: 69.79 GiB (97.66%) used: 14.17 GiB (20.3%) fs: ext4
    dev: /dev/sdb2 maj-min: 8:18
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sdb1 maj-min: 8:17
  ID-3: /home raw-size: 166.75 GiB size: 163.08 GiB (97.79%) used: 1.77 GiB (1.1%) fs: ext4
    dev: /dev/sdb3 maj-min: 8:19
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 5.65 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 52.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2149 libs: 1108 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
    2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
    1: deb [arch=amd64] https://repo.vivaldi.com/stable/deb/ stable main
Info:
  Processes: 237 Uptime: 10m wakeups: 2 Memory: 3.66 GiB used: 1.39 GiB (38.0%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
btw, can't recall when I installed the 6.4 liquorix kernel.
Thank you very much in advance :heart:
Linux noob being grateful for help and assistance.
Top
User avatar
argonaut459
Posts: 508
Joined: Tue Oct 04, 2022 11:49 am

Re: MX-23 RC3 (Xfce) Feedback thread

#108 Post by argonaut459 »

Small addition:
Set the system up as German during the very first live usb run (using ventoy).
Clicking the TOUR on welcome screen, it's in english.
Thank you very much in advance :heart:
Linux noob being grateful for help and assistance.
Top
User avatar
asqwerth
Developer
Posts: 7947
Joined: Sun May 27, 2007 5:37 am

Re: MX-23 RC3 (Xfce) Feedback thread

#109 Post by asqwerth »

Finally installed RC3 after the departure of family from out of town.

Installed properly but I did get the warning message pop up (in installer) about the system being EFI (it's not, but long ago when I installed Manjaro the installer added a efi flag in its partition, which I've not removed) but there being nothing in /boot/efi. I continued on with the installation despite that message since I place grub in PBR. No issues.

Generally everything is fine, though I had to proceed with fehlix's procedure to disable os_prober on my multiboot machine since editing the grub file no longer works.

One issue with UIP - even after I manually installed emerald in RC3, the UIP-generated list that I subsequently made in RC3 did not include emerald.

Similarly it was not in the list generated from Beta1 (which had emerald installed), which was why when I used that earlier list to install my packages in RC3, emerald was not installed and I had to then specifically install it.
Desktop: Intel i5-4460, 16GB RAM, Intel integrated graphics
Clevo N130WU-based Ultrabook: Intel i7-8550U (Kaby Lake R), 16GB RAM, Intel integrated graphics (UEFI)
ASUS X42D laptop: AMD Phenom II, 6GB RAM, Mobility Radeon HD 5400
Top
User avatar
thinkpadx
Posts: 670
Joined: Thu Aug 13, 2020 8:34 pm

Re: MX-23 RC3 (Xfce) Feedback thread

#110 Post by thinkpadx »

jesito wrote: Sat Jul 29, 2023 3:01 am Just a silly question:

I installed RC2 a few days ago. Today I went to the apt update and got a lot of updates.
Does this mean I'm on the RC3 with all these updates, or should I install RC3 from fresh?.
Thanks in advance!!

Jes.
From my understanding an comments from a couple of devs - yes it will be updated and does update. i also remeber being told that the rc1/2/3 will show up until final release. from my take it shows people in the QSI when posted what the original install was so they have a place of reference. just do updates and you should be good.

see:
viewtopic.php?t=76035
Top
Locked

Return to “General”