MX-23 RC3 (Xfce) Feedback thread

Forum rules
Locked
Message
Author
User avatar
AlphaElwedritsch
Posts: 54
Joined: Fri Apr 28, 2023 5:49 am

Re: MX-23 RC3 (Xfce) Feedback thread

#91 Post by AlphaElwedritsch »

i dont see nala on my rc3
Top
User avatar
fehlix
Developer
Posts: 12608
Joined: Wed Apr 11, 2018 5:09 pm

Re: MX-23 RC3 (Xfce) Feedback thread

#92 Post by fehlix »

AlphaElwedritsch wrote: ↑Thu Jul 27, 2023 5:29 pm i dont see nala on my rc3

Code: Select all

which nala
Top
User avatar
fehlix
Developer
Posts: 12608
Joined: Wed Apr 11, 2018 5:09 pm

Re: MX-23 RC3 (Xfce) Feedback thread

#93 Post by fehlix »

gRegNfo wrote: ↑Thu Jul 27, 2023 4:09 pm Since NALA has issues, and I'm always preserving my /home...
How can I stop it from being default package installer?
* Should I just uninstall it?
Nala had issues - kind of about for 2 or so users during upgrade. One issue could be identified and had been fixed.
The other was not clearly reproducible, but was reported as a hanger, which means the installation finished,
but did not return to the prompt. Simply Ctrl-C to get the prompt, seem to have helped.

Suggest keep nala installed and try to use it manually from the cli if you like.

To re-enable apt and disable nala when using mx-updater:
run this:

Code: Select all

fpad ~/.config/MX-Linux/apt-notifier.conf
and comment out this line

Code: Select all

use_nala = true
so it looks like this line:

Code: Select all

# use_nala = true
or this to set to false,

Code: Select all

use_nala = false
+++EDIT+++ swapped false <-> true
Top
User avatar
fehlix
Developer
Posts: 12608
Joined: Wed Apr 11, 2018 5:09 pm

Re: MX-23 RC3 (Xfce) Feedback thread

#94 Post by fehlix »

MadMax wrote: ↑Thu Jul 27, 2023 5:27 pm I thought there was the decision to revert the default back to apt for the time being during the alpha/beta phase?
Yes, but the user settings are also within ~/.config/MX-Linux/apt-notifier.conf.
And probably when upgrading from RCx to RC3, it was not considered to touch user configs.
So user can enable/disable nala within the user-config at ~/.config/MX-Linux/apt-notifier.conf
Top
User avatar
vic1961
Posts: 1
Joined: Thu Jul 27, 2023 7:00 pm

Re: MX-23 RC3 (Xfce) Feedback thread

#95 Post by vic1961 »

Just installed MX-23 RC3 on my new HP laptop. This time It went great. Seems the installer issue with RC2 has been fixed.
Top
User avatar
entropyfoe
Posts: 615
Joined: Thu Apr 19, 2007 11:42 am

Re: MX-23 RC3 (Xfce) Feedback thread

#96 Post by entropyfoe »

On my RC3 install, I was so excited that fsearch was working, but no, still not running, gives this error when starting from the terminal

OK, next level troubleshooting, synaptic tells me that I have libcanberra-gtk-module installed version 0.30-10

Code: Select all

music@Ryzen2:~
$ fsearch
Gtk-Message: 18:40:20.541: Failed to load module "canberra-gtk-module"
*** buffer overflow detected ***: terminated
Aborted

Code: Select all

System:
  Kernel: 6.1.0-10-amd64 [6.1.38-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_RC3_x64 Libretto July 24  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop Mobo: ASUSTeK model: PRIME X470-PRO v: Rev X.0x serial: <superuser required>
    UEFI-[Legacy]: American Megatrends v: 5204 date: 07/29/2019
CPU:
  Info: model: AMD Ryzen 5 3600X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
    built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
    microcode: 0x8701013
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache: L1: 384 KiB
    desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 32 MiB desc: 2x16 MiB
  Speed (MHz): avg: 2196 high: 2200 min/max: 2200/4409 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 2196 2: 2196 3: 2200 4: 2194 5: 2195 6: 2196
    7: 2200 8: 2200 9: 2195 10: 2196 11: 2196 12: 2195 bogomips: 91029
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GK208B [GeForce GT 710] vendor: Micro-Star MSI driver: nvidia v: 470.199.02
    non-free: series: 470.xx+ status: legacy-active (EOL~2023/24) arch: Fermi 2 code: GF119/GK208
    process: TSMC 28nm built: 2010-16 pcie: gen: 2 speed: 5 GT/s lanes: 8 bus-ID: 09:00.0
    chip-ID: 10de:128b class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
    gpu: nvidia display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
  Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 96 size: 509x286mm (20.04x11.26")
    diag: 584mm (22.99") modes: N/A
  API: OpenGL v: 4.6.0 NVIDIA 470.199.02 renderer: NVIDIA GeForce GT 710/PCIe/SSE2
    direct-render: Yes
Audio:
  Device-1: NVIDIA GK208 HDMI/DP Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie:
    gen: 2 speed: 5 GT/s lanes: 8 bus-ID: 09:00.1 chip-ID: 10de:0e0f class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0b:00.4 chip-ID: 1022:1487 class-ID: 0403
  API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 07:00.0 chip-ID: 8086:1539 class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 1.25 TiB used: 568.94 GiB (44.3%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 250GB
    size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
    serial: <filter> rev: 2B2QEXM7 temp: 36.9 C scheme: MBR
  ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 1TB size: 931.51 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 1B6Q scheme: MBR
  ID-3: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 840 PRO Series size: 119.24 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 5B0Q
    scheme: MBR
Partition:
  ID-1: / raw-size: 88.35 GiB size: 86.41 GiB (97.80%) used: 9.86 GiB (11.4%) fs: ext4
    dev: /dev/nvme0n1p4 maj-min: 259:4
Swap:
  Kernel: swappiness: 1 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 32.23 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p2 maj-min: 259:2
Sensors:
  System Temperatures: cpu: 50.0 C mobo: 32.0 C gpu: nvidia temp: 46 C
  Fan Speeds (RPM): cpu: 0 case-1: 0 case-2: 1019 case-3: 903 gpu: nvidia fan: 50%
  Power: 12v: 12.16 5v: N/A 3.3v: N/A vbat: N/A
Repos:
  Packages: pm: dpkg pkgs: 2426 libs: 1341 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 334 Uptime: 3d 18h 28m wakeups: 3 Memory: 31.26 GiB used: 6.83 GiB (21.9%)
  Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0
  alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Last edited by entropyfoe on Thu Jul 27, 2023 9:22 pm, edited 2 times in total.
MX 23.5 on Asus PRIME X470-PRO
AMD Ryzen 3600X (12 threads @ 3.8 GHz)
32 Gig DDR4 3600 (Crucial CL 16)
Nvidia GeForce GT 710
Samsung 970 NVMe nvme0n1 P1-3=MX-23.5, P4=testing
Samsung 980 NVMe =1TB Data, plus 2TB WD =backups
on-board ethernet & sound
Top
taraxacum
Posts: 81
Joined: Fri Dec 14, 2018 6:24 pm

Re: MX-23 RC3 (Xfce) Feedback thread

#97 Post by taraxacum »

dolphin_oracle wrote: ↑Sun Jul 23, 2023 4:59 pm
usually its a video card problem. you might try one of the failsafe boot options.
Starting the 64-bit live version with the F6 - switch Failsafe is helpful, but not a solution, because it installs NEW problems at the same time:

Live-Version starts WITH F6-Failsafe: (MX21-amd64) MX23-amd64

only 5 screen resolutions are displayed in total:
1600x1200
1280x1024
1024x768
800x600
640x480
Frequency display: 0 Hz

Additional file is installed: no-mode-set.conf

Code: Select all

options i915 modeset=0
in the directory: lib/modeprobe.d.

Live-Version starts WITHOUT F6 Failsafe: MX 18.2-amd64, MX19.4-amd64, MX23RC3 i386:

Total 10 screen resolutions are displayed:
1920x1080
1680x1050
1600x900
1280x1024
1140x900
1280x720
1024x768
800x600
640x480
720x400
Frequency display: 60 Hz
My decision is therefore meanwhile firm - to install in the future only MX 23-i386 version on this PC, because this starts WITHOUT failsafe switch!

@dolphin_oracle @timkb4cq Please make me a proposal with a modified 64-bit kernel, which can be started without failsafe switch, then I am gladly ready to execute further test installations on this and to report about it.
It seems to be an i915-intel problem?

Have you already looked at this latest message ?

Question to @fehlix :
Will below i915-intel update be included in future MX updates yes/no - or do I have to take care of this installation myself?
On my PC there are a lot of i915-Intel files.

https://www.news.de/technik/856964493/i ... 07-2023/1/
https://www.intel.com/content/www/us/en ... 00886.html

Code: Select all

$ lspci -k | grep -EA3 'VGA|3D|Display'
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
	Subsystem: Hewlett-Packard Company 82Q35 Express Integrated Graphics Controller
	Kernel modules: i915
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)

Back to Post: viewtopic.php?p=734958#p734958

Code: Select all

System:
  Kernel: 6.1.0-10-amd64 [6.1.38-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-amd64 root=UUID=<filter> ro vga=794 quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_RC3_x64 Libretto July 24  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Hewlett-Packard product: HP Compaq dc7800p Convertible Minitower v: N/A
    serial: <superuser required> Chassis: type: 6 serial: <superuser required>
  Mobo: Hewlett-Packard model: 0AACh serial: <superuser required> BIOS: Hewlett-Packard
    v: 786F1 v01.35 date: 10/23/2015
CPU:
  Info: model: Intel Core2 Duo E8400 bits: 64 type: MCP arch: Penryn level: v1 built: 2008
    process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 6 microcode: 0x612
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 1995 min/max: 1998/3000 scaling: driver: acpi-cpufreq governor: ondemand
    cores: 1: 1995 2: 1995 bogomips: 11969
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
    affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 82Q35 Express Integrated Graphics vendor: Hewlett-Packard driver: N/A
    alternate: i915 arch: Gen-4 process: Intel 65n built: 2006-07 bus-ID: 00:02.0 chip-ID: 8086:29b2
    class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: vesa
    dri: swrast gpu: N/A display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1280x1024 s-dpi: 54 s-size: 607x342mm (23.90x13.46") s-diag: 697mm (27.43")
  Monitor-1: default res: 1280x1024 size: N/A modes: N/A
  API: OpenGL v: 4.5 Mesa 22.3.6 renderer: llvmpipe (LLVM 15.0.6 128 bits) direct-render: Yes
Audio:
  Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
  API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel 82566DM-2 Gigabit Network vendor: Hewlett-Packard driver: e1000e v: kernel
    port: 1100 bus-ID: 00:19.0 chip-ID: 8086:10bd class-ID: 0200
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 232.89 GiB used: 7.48 GiB (3.2%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD2500AAKX-753CA0 size: 232.89 GiB
    block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1H15
    scheme: MBR
Partition:
  ID-1: / raw-size: 18 GiB size: 17.55 GiB (97.50%) used: 7.48 GiB (42.6%) fs: ext4 dev: /dev/sda8
    maj-min: 8:8
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8.5 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
    maj-min: 8:3
Sensors:
  System Temperatures: cpu: 41.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2077 libs: 1050 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb https://mirror.23m.com/mx-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 189 Uptime: 55m wakeups: 1 Memory: 3.74 GiB used: 1.41 GiB (37.7%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Last edited by taraxacum on Sat Jul 29, 2023 7:04 pm, edited 4 times in total.
Top
User avatar
doodstecsonhere
Posts: 86
Joined: Sat Jun 17, 2023 10:44 am

Re: MX-23 RC3 (Xfce) Feedback thread

#98 Post by doodstecsonhere »

yann wrote: ↑Thu Jul 27, 2023 2:19 pm Hello everyone and thanks again to the MXlinux team for my favorite OS.

I'm getting ready to migrate to MX-23 and I have seen in some reviews that RAM usage rose to 1GB. Is it in all cases and is it reversible ?
@yann rose to 1GB from what? I'm on MX23 XFCE installed and updated from RC2, my system boots up just under 700MB at boot (htop app RAM reading), but I did some modification already like switching to compton compositor instead of the default xfwm compositor in MX Tweak. Saved me about 50MB ram at boot.

Try MX23 on live usb. :)
Top
User avatar
doodstecsonhere
Posts: 86
Joined: Sat Jun 17, 2023 10:44 am

Re: MX-23 RC3 (Xfce) Feedback thread

#99 Post by doodstecsonhere »

gRegNfo wrote: ↑Thu Jul 27, 2023 3:48 pm Just upgraded to RC3 preserving /home on my laptop (specs)
Installer had issues with grub also, though it installed the system nicelly:

Code: Select all

2023-07-27 20:19:23.833 DBG default: Installer version: 23.7.13mx23
2023-07-27 20:19:23.953 DBG default: << void MInstall::startup() >>
2023-07-27 20:19:23.953 DBG default: Detect EFI: 64
2023-07-27 20:19:23.953 DBG default: Exec #1: uname -m
2023-07-27 20:19:24.006 DBG default: Exit #1: 0
2023-07-27 20:19:24.006 DBG default: Detect arch: "x86_64"
2023-07-27 20:19:24.006 DBG default: Live boot: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash lang=en_US kbd=pt tz=Europe/Lisbon
2023-07-27 20:19:42.477 DBG default: Exec #2: du -scb /live/aufs/boot
2023-07-27 20:19:42.484 DBG default: Exit #2: 0
2023-07-27 20:19:42.485 DBG default: Basic image: 6224235008 true "/live/boot-dev/antiX/linuxfs.info"
2023-07-27 20:19:42.486 DBG default: Source inodes: 295269 Assumed block size: 4096
2023-07-27 20:19:42.486 DBG default: Minimum space: 99399748 (boot), 7433656832 (root)
2023-07-27 20:19:42.543 DBG default: Exec #3: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2023-07-27 20:19:42.557 DBG default: Exit #3: 0
2023-07-27 20:19:42.558 DBG default: Bash #4: guess-hwclock
2023-07-27 20:19:44.031 DBG default: Exit #4: 0
2023-07-27 20:19:44.031 DBG default: Bash #5: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2023-07-27 20:19:44.040 DBG default: Exit #5: 0
2023-07-27 20:19:44.041 DBG default: Bash #6: ls -1 /home | grep -Ev '^(lost\+found|demo|snapshot)$' | grep -q '[a-zA-Z0-9]'
2023-07-27 20:19:44.051 DBG default: Exit #6: 1
2023-07-27 20:19:44.051 DBG default: check for possible snapshot: false
2023-07-27 20:19:44.052 DBG default: Bash #7: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2023-07-27 20:19:44.086 DBG default: Exit #7: 0
2023-07-27 20:19:44.093 DBG default: Exec #8: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,FSVER,LABEL,MODEL,PARTFLAGS
2023-07-27 20:19:44.105 DBG default: Exit #8: 0
2023-07-27 20:19:44.105 DBG default: Exec #9: parted -lm
2023-07-27 20:19:44.797 DBG default: Exit #9: 0
2023-07-27 20:19:44.797 DBG default: Bash #10: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/*
2023-07-27 20:19:44.804 DBG default: SErr #10: "lsblk: /dev/mapper/control: not a block device\n"
2023-07-27 20:19:44.804 DBG default: Exit #10: 64
2023-07-27 20:19:44.806 DBG default: Exec #11: cryptsetup status /dev/mapper/ventoy
2023-07-27 20:19:44.822 DBG default: Exit #11: 0
2023-07-27 20:19:46.647 DBG default: Bash #12: command -v  system-keyboard-qt >/dev/null 2>&1
2023-07-27 20:19:46.661 DBG default: Exit #12: 0
2023-07-27 20:19:46.661 DBG default: Exec #13: system-keyboard-qt
2023-07-27 20:19:58.381 DBG default: SErr #13: "\"BACKSPACE\" = \"guess\"\n\"XKBLAYOUT\" = \"pt\"\n\"XKBMODEL\" = \"pc105\"\n\"XKBOPTIONS\" = \"grp:rctrl_rshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll\"\n\"XKBVARIANT\" = \"\"\n\"# KEYBOARD CONFIGURATION FILE\\n\\n# Consult the keyboard(5) manual page.\\n\\nXKBMODEL=\\\"asus_laptop\\\"\\nXKBLAYOUT=\\\"pt\\\"\\nXKBVARIANT=\\\"\\\"\\nXKBOPTIONS=\\\"grp:rctrl_rshift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp\\\"\\n\\nBACKSPACE=\\\"guess\\\"\\n\"\n"
2023-07-27 20:19:58.382 DBG default: Exit #13: 0
2023-07-27 20:20:04.202 DBG default: Bash #14: command -v  system-keyboard-qt >/dev/null 2>&1
2023-07-27 20:20:04.211 DBG default: Exit #14: 0
2023-07-27 20:20:04.212 DBG default: Exec #15: system-keyboard-qt
2023-07-27 20:20:06.196 DBG default: SErr #15: "\"BACKSPACE\" = \"guess\"\n\"XKBLAYOUT\" = \"pt\"\n\"XKBMODEL\" = \"asus_laptop\"\n\"XKBOPTIONS\" = \"grp:rctrl_rshift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp\"\n\"XKBVARIANT\" = \"\"\n"
2023-07-27 20:20:06.196 DBG default: Exit #15: 0
2023-07-27 20:20:52.688 DBG default: << bool Base::saveHomeBasic() >>
2023-07-27 20:20:52.688 DBG default: Exec #16: umount -q /dev/sda5
2023-07-27 20:20:52.700 DBG default: Exit #16: 32
2023-07-27 20:20:52.700 DBG default: Exec #17: umount -q /mnt/antiX
2023-07-27 20:20:52.705 DBG default: SErr #17: "umount: /mnt/antiX: no mount point specified.\n"
2023-07-27 20:20:52.705 DBG default: Exit #17: 32
2023-07-27 20:20:52.706 DBG default: Exec #18: mount -o ro /dev/sda5 /mnt/antiX
2023-07-27 20:20:52.766 DBG default: Exit #18: 0
2023-07-27 20:20:52.766 DBG default: Exec #19: umount -l /mnt/antiX
2023-07-27 20:20:52.772 DBG default: Exit #19: 0
2023-07-27 20:20:52.839 DBG default: ++ Preparing to install MX Linux ++
2023-07-27 20:20:52.840 DBG default: Bash #20: echo 0 > /sys/module/zswap/parameters/enabled
2023-07-27 20:20:52.847 DBG default: Exit #20: 0
2023-07-27 20:20:52.848 DBG default: Exec #21: modprobe zram
2023-07-27 20:20:52.861 DBG default: Exit #21: 0
2023-07-27 20:20:52.861 DBG default: Exec #22: zramctl zram0 -a zstd -s 16188207104
2023-07-27 20:20:52.886 DBG default: Exit #22: 0
2023-07-27 20:20:52.886 DBG default: Exec #23: mkswap -q /dev/zram0
2023-07-27 20:20:52.894 DBG default: Exit #23: 0
2023-07-27 20:20:52.894 DBG default: Exec #24: swapon -p 32767 /dev/zram0
2023-07-27 20:20:52.901 DBG default: Exit #24: 0
2023-07-27 20:20:52.901 DBG default: Exec #25: smartctl -H /dev/sda
2023-07-27 20:20:52.984 DBG default: SOut #25: "smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-10-amd64] (local build)\nCopyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2023-07-27 20:20:52.984 DBG default: Exit #25: 0
2023-07-27 20:20:52.984 DBG default: Bash #26: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2023-07-27 20:20:53.059 DBG default: Exit #26: 0
2023-07-27 20:20:53.059 DBG default: << void MInstall::setupAutoMount(bool) >>
2023-07-27 20:20:53.060 DBG default: Bash #27: ps -e | grep 'udisksd'
2023-07-27 20:20:53.088 DBG default: SOut #27: "   4957 ?        00:00:00 udisksd\n"
2023-07-27 20:20:53.088 DBG default: Exit #27: 0
2023-07-27 20:20:53.088 DBG default: Bash #28: grep -El '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d/*
2023-07-27 20:20:53.102 DBG default: Exit #28: 0
2023-07-27 20:20:53.102 DBG default: Bash #29: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | grep -Ev '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2023-07-27 20:20:53.116 DBG default: Exit #29: 1
2023-07-27 20:20:53.116 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2023-07-27 20:20:53.116 DBG default: Exec #30: touch /run/udev/rules.d/64-md-raid-assembly.rules
2023-07-27 20:20:53.122 DBG default: Exit #30: 0
2023-07-27 20:20:53.122 DBG default: Bash #31: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2023-07-27 20:20:53.126 DBG default: Exit #31: 0
2023-07-27 20:20:53.126 DBG default: Exec #32: udevadm control --reload
2023-07-27 20:20:53.156 DBG default: Exit #32: 0
2023-07-27 20:20:53.156 DBG default: Exec #33: udevadm trigger --subsystem-match=block
2023-07-27 20:20:53.176 DBG default: Exit #33: 0
2023-07-27 20:20:53.177 DBG default: Mount points:
2023-07-27 20:20:53.177 DBG default:  - "/" - "sda5" "" "/dev/sda5"
2023-07-27 20:20:53.177 DBG default: << void PartMan::preparePartitions() >>
2023-07-27 20:20:53.177 DBG default: Exec #34: umount -qR /mnt/antiX
2023-07-27 20:20:53.185 DBG default: Exit #34: 1
2023-07-27 20:20:53.185 DBG default: Exec #35: rm -rf /mnt/antiX
2023-07-27 20:20:53.190 DBG default: Exit #35: 0
2023-07-27 20:20:53.190 DBG default: Exec #36: swapon --show=NAME --noheadings
2023-07-27 20:20:53.194 DBG default: Exit #36: 0
2023-07-27 20:20:53.195 DBG default: Exec #37: findmnt --raw -o SOURCE
2023-07-27 20:20:53.199 DBG default: Exit #37: 0
2023-07-27 20:20:53.199 DBG default: ++ Preparing required partitions ++
2023-07-27 20:20:53.200 DBG default: Bash #38: sgdisk /dev/sda -q --typecode=5:8303
2023-07-27 20:20:53.213 DBG default: Exit #38: 0
2023-07-27 20:20:53.218 DBG default: Exec #39: partx -u /dev/sda
2023-07-27 20:20:53.238 DBG default: Exit #39: 0
2023-07-27 20:20:53.238 DBG default: << void PartMan::formatPartitions() >>
2023-07-27 20:20:53.238 DBG default: << void PartMan::mountPartitions() >>
2023-07-27 20:20:53.238 DBG default: ++ Mounting: / ++
2023-07-27 20:20:53.240 DBG default: Exec #40: mount --mkdir -o noatime,async,noiversion /dev/sda5 /mnt/antiX/
2023-07-27 20:20:53.311 DBG default: Exit #40: 0
2023-07-27 20:20:53.311 DBG default: Exec #41: lsblk --list -bJo PATH,UUID
2023-07-27 20:20:53.321 DBG default: Exit #41: 0
2023-07-27 20:20:53.322 DBG default: << void Base::install() >>
2023-07-27 20:20:53.322 DBG default: ++ Deleting old system ++
2023-07-27 20:20:53.323 DBG default: Exec #42: find /mnt/antiX/boot -mindepth 1 -maxdepth 1 ! -name efi -exec rm -r {} +
2023-07-27 20:20:53.356 DBG default: Exit #42: 0
2023-07-27 20:20:53.356 DBG default: Exec #43: find /mnt/antiX -mindepth 1 -maxdepth 1 ! -name home ! -name boot -exec rm -r {} +
2023-07-27 20:21:07.512 DBG default: Exit #43: 0
2023-07-27 20:21:07.512 DBG default: << void Base::copyLinux(bool) >>
2023-07-27 20:21:07.516 DBG default: ++ Copying new system ++
2023-07-27 20:21:07.518 DBG default: Exec COPY: cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/libx32 /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX
2023-07-27 20:29:09.806 DBG default: Exit COPY: 0 QProcess::NormalExit
2023-07-27 20:29:09.806 DBG default: ++ Setting system configuration ++
2023-07-27 20:29:09.808 DBG default: MkPath(SUCCESS): "/mnt/antiX/tmp"
2023-07-27 20:29:09.808 DBG default: Bash #44: /usr/sbin/live-to-installed /mnt/antiX
2023-07-27 20:29:09.911 DBG default: SErr #44: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/Installer.desktop\xE2\x80\x99: No such file or directory\nfind: \xE2\x80\x98/mnt/antiX/home/*//.idesktop/gazelle.lnk\xE2\x80\x99: No such file or directory\n"
2023-07-27 20:29:09.911 DBG default: Exit #44: 0
2023-07-27 20:29:09.911 DBG default: Install tabs
2023-07-27 20:29:09.911 DBG default: Creating fstab entry for: "/" "/dev/sda5"
2023-07-27 20:29:09.912 DBG default: Exec #45: mount --mkdir --rbind --make-rslave /dev /mnt/antiX/dev
2023-07-27 20:29:09.930 DBG default: Exit #45: 0
2023-07-27 20:29:09.930 DBG default: Exec #46: mount --mkdir --rbind --make-rslave /sys /mnt/antiX/sys
2023-07-27 20:29:09.940 DBG default: Exit #46: 0
2023-07-27 20:29:09.940 DBG default: Exec #47: mount --mkdir --rbind /proc /mnt/antiX/proc
2023-07-27 20:29:09.950 DBG default: Exit #47: 0
2023-07-27 20:29:09.950 DBG default: Exec #48: mount --mkdir -t tmpfs -o size=100m,nodev,mode=755 tmpfs /mnt/antiX/run
2023-07-27 20:29:09.958 DBG default: Exit #48: 0
2023-07-27 20:29:09.958 DBG default: Exec #49: mount --mkdir --rbind /run/udev /mnt/antiX/run/udev
2023-07-27 20:29:09.967 DBG default: Exit #49: 0
2023-07-27 20:29:09.977 DBG default: Desktop menu
2023-07-27 20:29:09.977 DBG default: Exec #50: chroot /mnt/antiX desktop-menu --write-out-global
2023-07-27 20:29:09.987 DBG default: SErr #50: "/usr/sbin/chroot: failed to run command \xE2\x80\x98""desktop-menu\xE2\x80\x99: No such file or directory\n"
2023-07-27 20:29:09.987 DBG default: Exit #50: 127
2023-07-27 20:29:09.987 DBG default: Exec #51: rm -rf /mnt/antiX/home/demo
2023-07-27 20:29:10.023 DBG default: Exit #51: 0
2023-07-27 20:29:10.023 DBG default: Change root: /mnt/antiX
2023-07-27 20:29:10.023 DBG default: Exec #52: rm /var/lib/dbus/machine-id /etc/machine-id
2023-07-27 20:29:10.058 DBG default: Exit #52: 0
2023-07-27 20:29:10.058 DBG default: Exec #53: dbus-uuidgen --ensure=/etc/machine-id
2023-07-27 20:29:10.116 DBG default: Exit #53: 0
2023-07-27 20:29:10.117 DBG default: Exec #54: dbus-uuidgen --ensure
2023-07-27 20:29:10.152 DBG default: Exit #54: 0
2023-07-27 20:29:10.152 DBG default: Change root: 
2023-07-27 20:29:10.152 DBG default: Bash #55: lspci -n | grep -qE '80ee:beef|80ee:cafe'
2023-07-27 20:29:10.209 DBG default: Exit #55: 1
2023-07-27 20:29:10.209 DBG default: Bash #56: mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-27 20:29:10.222 DBG default: Exit #56: 1
2023-07-27 20:29:10.223 DBG default: Bash #57: mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-27 20:29:10.235 DBG default: Exit #57: 1
2023-07-27 20:29:10.235 DBG default: Bash #58: mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-27 20:29:10.245 DBG default: Exit #58: 1
2023-07-27 20:29:10.245 DBG default: Bash #59: mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1
2023-07-27 20:29:10.254 DBG default: Exit #59: 1
2023-07-27 20:29:10.254 DBG default: Bash #60: mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1
2023-07-27 20:29:10.264 DBG default: Exit #60: 1
2023-07-27 20:29:10.264 DBG default: Bash #61: rmdir --ignore-fail-on-non-empty /mnt/antiX/media/sd*
2023-07-27 20:29:10.274 DBG default: SErr #61: "rmdir: failed to remove '/mnt/antiX/media/sd*': No such file or directory\n"
2023-07-27 20:29:10.274 DBG default: Exit #61: 1
2023-07-27 20:29:10.275 DBG default: Change root: /mnt/antiX
2023-07-27 20:29:10.275 DBG default: Set service: "acpid" true
2023-07-27 20:29:10.275 DBG default: Exec #62: update-rc.d acpid defaults
2023-07-27 20:29:10.412 DBG default: Exit #62: 0
2023-07-27 20:29:10.412 DBG default: Exec #63: systemctl unmask acpid
2023-07-27 20:29:10.446 DBG default: Exit #63: 0
2023-07-27 20:29:10.446 DBG default: Exec #64: systemctl enable acpid
2023-07-27 20:29:10.578 DBG default: SErr #64: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\nCreated symlink /etc/systemd/system/multi-user.target.wants/acpid.service \xE2\x86\x92 /lib/systemd/system/acpid.service.\n"
2023-07-27 20:29:10.578 DBG default: Exit #64: 0
2023-07-27 20:29:10.578 DBG default: Set service: "cpufrequtils" true
2023-07-27 20:29:10.578 DBG default: Exec #65: update-rc.d cpufrequtils defaults
2023-07-27 20:29:10.652 DBG default: Exit #65: 0
2023-07-27 20:29:10.652 DBG default: Exec #66: systemctl unmask cpufrequtils
2023-07-27 20:29:10.665 DBG default: Exit #66: 0
2023-07-27 20:29:10.665 DBG default: Exec #67: systemctl enable cpufrequtils
2023-07-27 20:29:10.802 DBG default: SErr #67: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2023-07-27 20:29:10.802 DBG default: Exit #67: 0
2023-07-27 20:29:10.802 DBG default: Set service: "dbus" true
2023-07-27 20:29:10.802 DBG default: Exec #68: update-rc.d dbus defaults
2023-07-27 20:29:10.866 DBG default: Exit #68: 0
2023-07-27 20:29:10.866 DBG default: Exec #69: systemctl unmask dbus
2023-07-27 20:29:10.880 DBG default: Exit #69: 0
2023-07-27 20:29:10.880 DBG default: Exec #70: systemctl enable dbus
2023-07-27 20:29:11.017 DBG default: SErr #70: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n  .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n  a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n  D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n  instance name specified.\n"
2023-07-27 20:29:11.017 DBG default: Exit #70: 0
2023-07-27 20:29:11.017 DBG default: Set service: "haveged" true
2023-07-27 20:29:11.017 DBG default: Exec #71: update-rc.d haveged defaults
2023-07-27 20:29:11.090 DBG default: Exit #71: 0
2023-07-27 20:29:11.090 DBG default: Exec #72: systemctl unmask haveged
2023-07-27 20:29:11.101 DBG default: Exit #72: 0
2023-07-27 20:29:11.101 DBG default: Exec #73: systemctl enable haveged
2023-07-27 20:29:11.239 DBG default: SErr #73: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2023-07-27 20:29:11.240 DBG default: Exit #73: 0
2023-07-27 20:29:11.240 DBG default: Set service: "saned" false
2023-07-27 20:29:11.240 DBG default: Exec #74: update-rc.d saned remove
2023-07-27 20:29:11.312 DBG default: Exit #74: 0
2023-07-27 20:29:11.312 DBG default: Exec #75: systemctl disable saned
2023-07-27 20:29:11.449 DBG default: SErr #75: "Synchronizing state of saned.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install disable saned\ninsserv: warning: current start runlevel(s) (empty) of script `saned' overrides LSB defaults (2 3 4 5).\ninsserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `saned' overrides LSB defaults (0 1 6).\nUnit /lib/systemd/system/saned.service is masked, ignoring.\n"
2023-07-27 20:29:11.449 DBG default: Exit #75: 0
2023-07-27 20:29:11.449 DBG default: Exec #76: systemctl mask saned
2023-07-27 20:29:11.460 DBG default: SErr #76: "Created symlink /etc/systemd/system/saned.service \xE2\x86\x92 /dev/null.\n"
2023-07-27 20:29:11.460 DBG default: Exit #76: 0
2023-07-27 20:29:11.460 DBG default: Set service: "smartmontools" true
2023-07-27 20:29:11.460 DBG default: Exec #77: update-rc.d smartmontools defaults
2023-07-27 20:29:11.523 DBG default: Exit #77: 0
2023-07-27 20:29:11.523 DBG default: Exec #78: systemctl unmask smartmontools
2023-07-27 20:29:11.537 DBG default: Exit #78: 0
2023-07-27 20:29:11.537 DBG default: Exec #79: systemctl enable smartmontools
2023-07-27 20:29:11.666 DBG default: SErr #79: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2023-07-27 20:29:11.666 DBG default: Exit #79: 0
2023-07-27 20:29:11.666 DBG default: Set service: "anacron" true
2023-07-27 20:29:11.666 DBG default: Exec #80: update-rc.d anacron defaults
2023-07-27 20:29:11.729 DBG default: Exit #80: 0
2023-07-27 20:29:11.729 DBG default: Exec #81: systemctl unmask anacron
2023-07-27 20:29:11.742 DBG default: Exit #81: 0
2023-07-27 20:29:11.743 DBG default: Exec #82: systemctl enable anacron
2023-07-27 20:29:11.880 DBG default: SErr #82: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2023-07-27 20:29:11.880 DBG default: Exit #82: 0
2023-07-27 20:29:11.881 DBG default: Set service: "cron" true
2023-07-27 20:29:11.881 DBG default: Exec #83: update-rc.d cron defaults
2023-07-27 20:29:11.946 DBG default: Exit #83: 0
2023-07-27 20:29:11.946 DBG default: Exec #84: systemctl unmask cron
2023-07-27 20:29:11.961 DBG default: Exit #84: 0
2023-07-27 20:29:11.961 DBG default: Exec #85: systemctl enable cron
2023-07-27 20:29:12.105 DBG default: SErr #85: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2023-07-27 20:29:12.105 DBG default: Exit #85: 0
2023-07-27 20:29:12.105 DBG default: Set service: "sudo" true
2023-07-27 20:29:12.106 DBG default: Exec #86: update-rc.d sudo defaults
2023-07-27 20:29:12.177 DBG default: Exit #86: 0
2023-07-27 20:29:12.177 DBG default: Exec #87: systemctl unmask sudo
2023-07-27 20:29:12.191 DBG default: Exit #87: 0
2023-07-27 20:29:12.192 DBG default: Exec #88: systemctl enable sudo
2023-07-27 20:29:12.337 DBG default: SErr #88: "Synchronizing state of sudo.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable sudo\nFailed to enable unit, unit /lib/systemd/system/sudo.service is masked.\n"
2023-07-27 20:29:12.337 DBG default: Exit #88: 1
2023-07-27 20:29:12.337 DBG default: Set service: "zramswap" false
2023-07-27 20:29:12.337 DBG default: Exec #89: update-rc.d zramswap remove
2023-07-27 20:29:12.413 DBG default: Exit #89: 0
2023-07-27 20:29:12.413 DBG default: Exec #90: systemctl disable zramswap
2023-07-27 20:29:12.549 DBG default: SErr #90: "Synchronizing state of zramswap.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install disable zramswap\ninsserv: warning: current start runlevel(s) (empty) of script `zramswap' overrides LSB defaults (2 3 4 5).\ninsserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `zramswap' overrides LSB defaults (0 1 6).\nUnit /etc/systemd/system/zramswap.service is masked, ignoring.\n"
2023-07-27 20:29:12.549 DBG default: Exit #90: 0
2023-07-27 20:29:12.549 DBG default: Exec #91: systemctl mask zramswap
2023-07-27 20:29:12.559 DBG default: Exit #91: 0
2023-07-27 20:29:12.559 DBG default: Set service: "bluetooth" false
2023-07-27 20:29:12.559 DBG default: Exec #92: update-rc.d bluetooth remove
2023-07-27 20:29:12.624 DBG default: Exit #92: 0
2023-07-27 20:29:12.624 DBG default: Exec #93: systemctl disable bluetooth
2023-07-27 20:29:12.792 DBG default: SErr #93: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install disable bluetooth\ninsserv: warning: current start runlevel(s) (empty) of script `bluetooth' overrides LSB defaults (2 3 4 5).\ninsserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `bluetooth' overrides LSB defaults (0 1 6).\nRemoved \"/etc/systemd/system/bluetooth.target.wants/bluetooth.service\".\nRemoved \"/etc/systemd/system/dbus-org.bluez.service\".\n"
2023-07-27 20:29:12.792 DBG default: Exit #93: 0
2023-07-27 20:29:12.792 DBG default: Exec #94: systemctl mask bluetooth
2023-07-27 20:29:12.807 DBG default: SErr #94: "Created symlink /etc/systemd/system/bluetooth.service \xE2\x86\x92 /dev/null.\n"
2023-07-27 20:29:12.807 DBG default: Exit #94: 0
2023-07-27 20:29:12.807 DBG default: Set service: "rsync" true
2023-07-27 20:29:12.807 DBG default: Exec #95: update-rc.d rsync defaults
2023-07-27 20:29:12.873 DBG default: Exit #95: 0
2023-07-27 20:29:12.873 DBG default: Exec #96: systemctl unmask rsync
2023-07-27 20:29:12.888 DBG default: Exit #96: 0
2023-07-27 20:29:12.888 DBG default: Exec #97: systemctl enable rsync
2023-07-27 20:29:13.020 DBG default: SErr #97: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\nCreated symlink /etc/systemd/system/multi-user.target.wants/rsync.service \xE2\x86\x92 /lib/systemd/system/rsync.service.\n"
2023-07-27 20:29:13.020 DBG default: Exit #97: 0
2023-07-27 20:29:13.020 DBG default: Set service: "cups" false
2023-07-27 20:29:13.020 DBG default: Exec #98: update-rc.d cups remove
2023-07-27 20:29:13.090 DBG default: Exit #98: 0
2023-07-27 20:29:13.090 DBG default: Exec #99: systemctl disable cups
2023-07-27 20:29:13.234 DBG default: SErr #99: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install disable cups\ninsserv: warning: current start runlevel(s) (empty) of script `cups' overrides LSB defaults (2 3 4 5).\ninsserv: warning: current stop runlevel(s) (1 2 3 4 5) of script `cups' overrides LSB defaults (1).\nRemoved \"/etc/systemd/system/multi-user.target.wants/cups.path\".\nRemoved \"/etc/systemd/system/multi-user.target.wants/cups.service\".\nRemoved \"/etc/systemd/system/printer.target.wants/cups.service\".\nRemoved \"/etc/systemd/system/sockets.target.wants/cups.socket\".\n"
2023-07-27 20:29:13.234 DBG default: Exit #99: 0
2023-07-27 20:29:13.234 DBG default: Exec #100: systemctl mask cups
2023-07-27 20:29:13.248 DBG default: SErr #100: "Created symlink /etc/systemd/system/cups.service \xE2\x86\x92 /dev/null.\n"
2023-07-27 20:29:13.248 DBG default: Exit #100: 0
2023-07-27 20:29:13.248 DBG default: Set service: "smbd" true
2023-07-27 20:29:13.248 DBG default: Exec #101: update-rc.d smbd defaults
2023-07-27 20:29:13.322 DBG default: Exit #101: 0
2023-07-27 20:29:13.322 DBG default: Exec #102: systemctl unmask smbd
2023-07-27 20:29:13.334 DBG default: Exit #102: 0
2023-07-27 20:29:13.334 DBG default: Exec #103: systemctl enable smbd
2023-07-27 20:29:13.472 DBG default: SErr #103: "Synchronizing state of smbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smbd\n"
2023-07-27 20:29:13.472 DBG default: Exit #103: 0
2023-07-27 20:29:13.473 DBG default: Set service: "nmbd" true
2023-07-27 20:29:13.473 DBG default: Exec #104: update-rc.d nmbd defaults
2023-07-27 20:29:13.536 DBG default: Exit #104: 0
2023-07-27 20:29:13.536 DBG default: Exec #105: systemctl unmask nmbd
2023-07-27 20:29:13.548 DBG default: Exit #105: 0
2023-07-27 20:29:13.548 DBG default: Exec #106: systemctl enable nmbd
2023-07-27 20:29:13.678 DBG default: SErr #106: "Synchronizing state of nmbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable nmbd\n"
2023-07-27 20:29:13.678 DBG default: Exit #106: 0
2023-07-27 20:29:13.678 DBG default: Set service: "samba-ad-dc" true
2023-07-27 20:29:13.679 DBG default: Exec #107: update-rc.d samba-ad-dc defaults
2023-07-27 20:29:13.756 DBG default: Exit #107: 0
2023-07-27 20:29:13.756 DBG default: Exec #108: systemctl unmask samba-ad-dc
2023-07-27 20:29:13.768 DBG default: Exit #108: 0
2023-07-27 20:29:13.768 DBG default: Exec #109: systemctl enable samba-ad-dc
2023-07-27 20:29:13.904 DBG default: SErr #109: "Synchronizing state of samba-ad-dc.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable samba-ad-dc\n"
2023-07-27 20:29:13.904 DBG default: Exit #109: 0
2023-07-27 20:29:13.904 DBG default: Change root: 
2023-07-27 20:29:13.904 DBG default: Exec #110: sed -i s/WORKGROUP/Workgroup/g /mnt/antiX/etc/samba/smb.conf
2023-07-27 20:29:13.915 DBG default: Exit #110: 0
2023-07-27 20:29:13.915 DBG default: Bash #111: sed -i 's/'"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')"'/MXine/' /mnt/antiX/etc/hosts
2023-07-27 20:29:13.952 DBG default: Exit #111: 0
2023-07-27 20:29:13.952 DBG default: Bash #112: echo "MXine" | cat > /mnt/antiX/etc/hostname
2023-07-27 20:29:13.963 DBG default: Exit #112: 0
2023-07-27 20:29:13.963 DBG default: Bash #113: echo "MXine" | cat > /mnt/antiX/etc/mailname
2023-07-27 20:29:13.973 DBG default: Exit #113: 0
2023-07-27 20:29:13.973 DBG default: Bash #114: sed -i 's/.*send host-name.*/send host-name "MXine";/g' /mnt/antiX/etc/dhcp/dhclient.conf
2023-07-27 20:29:13.982 DBG default: Exit #114: 0
2023-07-27 20:29:13.982 DBG default: Bash #115: echo "MXine" | cat > /mnt/antiX/etc/defaultdomain
2023-07-27 20:29:13.994 DBG default: Exit #115: 0
2023-07-27 20:29:13.994 DBG default: << void Oobe::setLocale() >>
2023-07-27 20:29:13.994 DBG default: Update locale
2023-07-27 20:29:13.994 DBG default: Bash #116: chroot /mnt/antiX /usr/sbin/update-locale "LANG=en_US.UTF-8"
2023-07-27 20:29:14.037 DBG default: Exit #116: 0
2023-07-27 20:29:14.037 DBG default: Exec #117: ln -nfs /usr/share/zoneinfo/Europe/Lisbon /mnt/antiX/etc/localtime
2023-07-27 20:29:14.047 DBG default: Exit #117: 0
2023-07-27 20:29:14.047 DBG default: Exec #118: ln -nfs /usr/share/zoneinfo/Europe/Lisbon /etc/localtime
2023-07-27 20:29:14.054 DBG default: Exit #118: 0
2023-07-27 20:29:14.055 DBG default: Bash #119: echo Europe/Lisbon > /mnt/antiX/etc/timezone
2023-07-27 20:29:14.060 DBG default: Exit #119: 0
2023-07-27 20:29:14.061 DBG default: Bash #120: echo Europe/Lisbon > /etc/timezone
2023-07-27 20:29:14.067 DBG default: Exit #120: 0
2023-07-27 20:29:14.067 DBG default: Bash #121: echo '0.0 0 0.0
0
LOCAL' > /etc/adjtime
2023-07-27 20:29:14.073 DBG default: Exit #121: 0
2023-07-27 20:29:14.073 DBG default: Exec #122: hwclock --hctosys
2023-07-27 19:29:15.001 DBG default: Exit #122: 0
2023-07-27 19:29:15.001 DBG default: Exec #123: cp -f /etc/adjtime /mnt/antiX/etc/
2023-07-27 19:29:15.011 DBG default: Exit #123: 0
2023-07-27 19:29:15.011 DBG default: Exec #124: cp -f /etc/default/rcS /mnt/antiX/etc/default
2023-07-27 19:29:15.020 DBG default: Exit #124: 0
2023-07-27 19:29:15.020 DBG default: Bash #125: sed -i '/data0=/c\data0=%H:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2023-07-27 19:29:15.030 DBG default: SErr #125: "sed: can't read /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2023-07-27 19:29:15.030 DBG default: Exit #125: 2
2023-07-27 19:29:15.030 DBG default: Bash #126: sed -i '/data0=/c\data0=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2023-07-27 19:29:15.041 DBG default: SErr #126: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2023-07-27 19:29:15.041 DBG default: Exit #126: 2
2023-07-27 19:29:15.041 DBG default: Bash #127: sed -i '/time_format=/c\time_format=%H:%M' /home/demo/.config/xfce4/panel/datetime-1.rc
2023-07-27 19:29:15.050 DBG default: SErr #127: "sed: can't read /home/demo/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2023-07-27 19:29:15.050 DBG default: Exit #127: 2
2023-07-27 19:29:15.050 DBG default: Bash #128: sed -i '/time_format=/c\time_format=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc
2023-07-27 19:29:15.061 DBG default: SErr #128: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2023-07-27 19:29:15.061 DBG default: Exit #128: 2
2023-07-27 19:29:15.061 DBG default: Bash #129: sed -i 's/%l/%H/' /home/demo/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
2023-07-27 19:29:15.070 DBG default: Exit #129: 0
2023-07-27 19:29:15.070 DBG default: Bash #130: sed -i 's/%l/%H/' /mnt/antiX/etc/skel/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
2023-07-27 19:29:15.087 DBG default: Exit #130: 0
2023-07-27 19:29:15.087 DBG default: Bash #131: sed -i '/use24hFormat=/c\use24hFormat=2' /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc
2023-07-27 19:29:15.099 DBG default: SErr #131: "sed: can't read /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2023-07-27 19:29:15.099 DBG default: Exit #131: 2
2023-07-27 19:29:15.099 DBG default: Bash #132: sed -i '/use24hFormat=/c\use24hFormat=2' /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc
2023-07-27 19:29:15.109 DBG default: SErr #132: "sed: can't read /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2023-07-27 19:29:15.109 DBG default: Exit #132: 2
2023-07-27 19:29:15.109 DBG default: Bash #133: sed -i '/time1_format/c\time1_format=%H:%M' /mnt/antiX/etc/skel/.config/tint2/tint2rc
2023-07-27 19:29:15.118 DBG default: SErr #133: "sed: can't read /mnt/antiX/etc/skel/.config/tint2/tint2rc: No such file or directory\n"
2023-07-27 19:29:15.119 DBG default: Exit #133: 2
2023-07-27 19:29:15.119 DBG default: Bash #134: sed -i '/time1_format/c\time1_format=%H:%M' /home/demo/.config/tint2/tint2rc
2023-07-27 19:29:15.129 DBG default: SErr #134: "sed: can't read /home/demo/.config/tint2/tint2rc: No such file or directory\n"
2023-07-27 19:29:15.129 DBG default: Exit #134: 2
2023-07-27 19:29:15.130 DBG default: Bash #135: sed -i 's/%H:%M/%H:%M/g' /mnt/antiX/etc/skel/.icewm/preferences
2023-07-27 19:29:15.140 DBG default: SErr #135: "sed: can't read /mnt/antiX/etc/skel/.icewm/preferences: No such file or directory\n"
2023-07-27 19:29:15.140 DBG default: Exit #135: 2
2023-07-27 19:29:15.140 DBG default: Bash #136: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.fluxbox/init
2023-07-27 19:29:15.147 DBG default: SErr #136: "sed: can't read /mnt/antiX/etc/skel/.fluxbox/init: No such file or directory\n"
2023-07-27 19:29:15.147 DBG default: Exit #136: 2
2023-07-27 19:29:15.147 DBG default: Bash #137: sed -i 's/%H:%M/%k:%M/g' /mnt/antiX/etc/skel/.jwm/tray
2023-07-27 19:29:15.153 DBG default: SErr #137: "sed: can't read /mnt/antiX/etc/skel/.jwm/tray: No such file or directory\n"
2023-07-27 19:29:15.154 DBG default: Exit #137: 2
2023-07-27 19:29:15.154 DBG default: Localize repo
2023-07-27 19:29:15.154 DBG default: Exec #138: chroot /mnt/antiX localize-repo default
2023-07-27 19:29:15.217 DBG default: Exit #138: 0
2023-07-27 19:29:15.217 DBG default: Change root: /mnt/antiX
2023-07-27 19:29:15.217 DBG default: Exec #139: chpasswd
2023-07-27 19:29:15.315 DBG default: Exit #139: 0
2023-07-27 19:29:15.315 DBG default: Change root: 
2023-07-27 19:29:15.315 DBG default: Exec #140: sync
2023-07-27 19:29:15.495 DBG default: Exit #140: 0
2023-07-27 19:29:15.495 DBG default: check for remastered home demo folder: false
2023-07-27 19:29:15.495 DBG default: Exec #141: cp -n /mnt/antiX/etc/skel/.bash_profile /mnt/antiX/home/alien
2023-07-27 19:29:15.501 DBG default: SErr #141: "/usr/bin/cp: cannot stat '/mnt/antiX/etc/skel/.bash_profile': No such file or directory\n"
2023-07-27 19:29:15.502 DBG default: Exit #141: 1
2023-07-27 19:29:15.502 DBG default: Exec #142: cp -n /mnt/antiX/etc/skel/.bashrc /mnt/antiX/home/alien
2023-07-27 19:29:15.509 DBG default: Exit #142: 0
2023-07-27 19:29:15.509 DBG default: Exec #143: cp -n /mnt/antiX/etc/skel/.gtkrc /mnt/antiX/home/alien
2023-07-27 19:29:15.514 DBG default: SErr #143: "/usr/bin/cp: cannot stat '/mnt/antiX/etc/skel/.gtkrc': No such file or directory\n"
2023-07-27 19:29:15.514 DBG default: Exit #143: 1
2023-07-27 19:29:15.514 DBG default: Exec #144: cp -n /mnt/antiX/etc/skel/.gtkrc-2.0 /mnt/antiX/home/alien
2023-07-27 19:29:15.521 DBG default: SErr #144: "/usr/bin/cp: cannot stat '/mnt/antiX/etc/skel/.gtkrc-2.0': No such file or directory\n"
2023-07-27 19:29:15.521 DBG default: Exit #144: 1
2023-07-27 19:29:15.521 DBG default: Exec #145: cp -Rn /mnt/antiX/etc/skel/.config /mnt/antiX/home/alien
2023-07-27 19:29:15.534 DBG default: SErr #145: "/usr/bin/cp: not writing through dangling symlink '/mnt/antiX/home/alien/.config/xfce4/desktop/icons.screen.latest.rc'\n"
2023-07-27 19:29:15.534 DBG default: Exit #145: 1
2023-07-27 19:29:15.534 DBG default: Exec #146: cp -Rn /mnt/antiX/etc/skel/.local /mnt/antiX/home/alien
2023-07-27 19:29:15.543 DBG default: Exit #146: 0
2023-07-27 19:29:15.543 DBG default: Exec #147: chown -R demo:demo /mnt/antiX/home/alien
2023-07-27 19:29:16.507 DBG default: Exit #147: 0
2023-07-27 19:29:16.508 DBG default: Exec #148: sed -i s/demo/alien/g /mnt/antiX/etc/group
2023-07-27 19:29:47.238 DBG default: Exit #148: 0
2023-07-27 19:29:47.239 DBG default: Exec #149: sed -i s/demo/alien/g /mnt/antiX/etc/gshadow
2023-07-27 19:29:47.248 DBG default: Exit #149: 0
2023-07-27 19:29:47.249 DBG default: Exec #150: sed -i s/demo/alien/g /mnt/antiX/etc/passwd
2023-07-27 19:29:47.254 DBG default: Exit #150: 0
2023-07-27 19:29:47.254 DBG default: Exec #151: sed -i s/demo/alien/g /mnt/antiX/etc/shadow
2023-07-27 19:29:47.259 DBG default: Exit #151: 0
2023-07-27 19:29:47.259 DBG default: Exec #152: sed -i s/demo/alien/g /mnt/antiX/etc/subuid
2023-07-27 19:29:47.267 DBG default: Exit #152: 0
2023-07-27 19:29:47.267 DBG default: Exec #153: sed -i s/demo/alien/g /mnt/antiX/etc/subgid
2023-07-27 19:29:47.274 DBG default: Exit #153: 0
2023-07-27 19:29:47.275 DBG default: Exec #154: sed -i s/demo/alien/g /mnt/antiX/etc/slim.conf
2023-07-27 19:29:47.282 DBG default: SErr #154: "/usr/bin/sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2023-07-27 19:29:47.282 DBG default: Exit #154: 2
2023-07-27 19:29:47.283 DBG default: Exec #155: sed -i s/demo/alien/g /mnt/antiX/etc/lightdm/lightdm.conf
2023-07-27 19:29:47.291 DBG default: Exit #155: 0
2023-07-27 19:29:47.291 DBG default: Exec #156: sed -i s/demo/alien/g /mnt/antiX/home/*/.gtkrc-2.0
2023-07-27 19:29:47.299 DBG default: SErr #156: "/usr/bin/sed: can't read /mnt/antiX/home/*/.gtkrc-2.0: No such file or directory\n"
2023-07-27 19:29:47.299 DBG default: Exit #156: 2
2023-07-27 19:29:47.299 DBG default: Exec #157: sed -i s/demo/alien/g /mnt/antiX/root/.gtkrc-2.0
2023-07-27 19:29:47.304 DBG default: SErr #157: "/usr/bin/sed: can't read /mnt/antiX/root/.gtkrc-2.0: No such file or directory\n"
2023-07-27 19:29:47.304 DBG default: Exit #157: 2
2023-07-27 19:29:47.304 DBG default: Exec #158: sed -i s/#auto_login/auto_login/g /mnt/antiX/etc/slim.conf
2023-07-27 19:29:47.312 DBG default: SErr #158: "/usr/bin/sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2023-07-27 19:29:47.312 DBG default: Exit #158: 2
2023-07-27 19:29:47.312 DBG default: Exec #159: sed -i "s/#default_user /default_user /g" /mnt/antiX/etc/slim.conf
2023-07-27 19:29:47.319 DBG default: SErr #159: "/usr/bin/sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2023-07-27 19:29:47.319 DBG default: Exit #159: 2
2023-07-27 19:29:47.319 DBG default: Exec #160: sed -i s/User=/User=alien/g /mnt/antiX/etc/sddm.conf
2023-07-27 19:29:47.325 DBG default: SErr #160: "/usr/bin/sed: can't read /mnt/antiX/etc/sddm.conf: No such file or directory\n"
2023-07-27 19:29:47.326 DBG default: Exit #160: 2
2023-07-27 19:29:47.326 DBG default: Exec #161: touch /mnt/antiX/var/mail/alien
2023-07-27 19:29:47.333 DBG default: Exit #161: 0
2023-07-27 19:29:47.359 DBG default: Exec #162: sync
2023-07-27 19:29:47.398 DBG default: Exit #162: 0
2023-07-27 19:29:47.399 DBG default: << void SwapMan::install(QStringList&) >>
2023-07-27 19:29:47.411 DBG default: ++ Creating swap file ++
2023-07-27 19:29:47.415 DBG default: MkPath(SUCCESS): "/mnt/antiX/swap"
2023-07-27 19:29:47.415 DBG default: Exec #163: truncate --size=0 /mnt/antiX/swap/swap
2023-07-27 19:29:47.422 DBG default: Exit #163: 0
2023-07-27 19:29:47.422 DBG default: Exec #164: chattr +C /mnt/antiX/swap/swap
2023-07-27 19:29:47.429 DBG default: Exit #164: 0
2023-07-27 19:29:47.430 DBG default: Exec #165: fallocate -l 4096M /mnt/antiX/swap/swap
2023-07-27 19:29:47.462 DBG default: Exit #165: 0
2023-07-27 19:29:47.462 DBG default: Exec #166: mkswap -q /mnt/antiX/swap/swap
2023-07-27 19:29:47.502 DBG default: Exit #166: 0
2023-07-27 19:29:47.502 DBG default: ++ Configuring swap file ++
2023-07-27 19:29:47.504 DBG default: << void BootMan::install(const QStringList&) >>
2023-07-27 19:29:47.514 DBG default: Bash #167: ls /mnt/antiX/boot | grep 'initrd.img-3.6'
2023-07-27 19:29:47.524 DBG default: Exit #167: 1
2023-07-27 19:29:47.524 DBG default: Exec #168: mountpoint -q /sys/firmware/efi/efivars
2023-07-27 19:29:47.531 DBG default: Exit #168: 0
2023-07-27 19:29:47.531 DBG default: ++ Installing GRUB ++
2023-07-27 19:29:47.532 DBG default: Exec #169: cat /sys/firmware/efi/fw_platform_size
2023-07-27 19:29:47.537 DBG default: Exit #169: 0
2023-07-27 19:29:47.537 DBG default: Bash #170: ls /sys/firmware/efi/efivars | grep dump
2023-07-27 19:29:47.546 DBG default: Exit #170: 1
2023-07-27 19:29:47.546 DBG default: Change root: /mnt/antiX
2023-07-27 19:29:47.547 DBG default: Exec #171: grub-install --no-nvram --force-extra-removable --target=x86_64-efi --bootloader-id=MX --recheck
2023-07-27 19:29:47.568 DBG default: SErr #171: "Installing for x86_64-efi platform.\n/usr/sbin/grub-install: error: cannot find EFI directory.\n"
2023-07-27 19:29:47.568 DBG default: Exit #171: 1
2023-07-27 19:29:47.568 DBG default: Revert root: 
2023-07-27 19:29:47.568 DBG default: -- FAILED Phase 4 - GRUB installation failed. You can reboot to the live medium and use the GRUB Rescue menu to repair the installation. --
2023-07-27 19:29:47.607 DBG default: << void MProcess::halt(bool) >>
2023-07-27 19:29:47.633 DBG default: << void MInstall::cleanup() >>
2023-07-27 19:29:47.633 DBG default: Configuration: /mnt/antiX/etc/minstall.conf
2023-07-27 19:29:47.633 DBG default:  - Product: MX Linux 23
2023-07-27 19:29:47.633 DBG default:  - Version: 23.7.13mx23
2023-07-27 19:29:47.633 DBG default:  = GRUB:
2023-07-27 19:29:47.633 DBG default:    - Install: true
2023-07-27 19:29:47.633 DBG default:    - TargetType: ESP
2023-07-27 19:29:47.633 DBG default:  = Localization:
2023-07-27 19:29:47.633 DBG default:    - ClockHours: 24
2023-07-27 19:29:47.633 DBG default:    - LocalClock: true
2023-07-27 19:29:47.633 DBG default:    - Locale: en_US.UTF-8
2023-07-27 19:29:47.633 DBG default:    - Timezone: Europe/Lisbon
2023-07-27 19:29:47.633 DBG default:  = Network:
2023-07-27 19:29:47.633 DBG default:    - ComputerName: MXine
2023-07-27 19:29:47.633 DBG default:    - Domain: example.dom
2023-07-27 19:29:47.633 DBG default:    - Samba: true
2023-07-27 19:29:47.633 DBG default:    - Workgroup: Workgroup
2023-07-27 19:29:47.633 DBG default:  = Services:
2023-07-27 19:29:47.633 DBG default:    - acpid: true
2023-07-27 19:29:47.633 DBG default:    - anacron: true
2023-07-27 19:29:47.633 DBG default:    - bluetooth: false
2023-07-27 19:29:47.634 DBG default:    - cpufrequtils: true
2023-07-27 19:29:47.634 DBG default:    - cron: true
2023-07-27 19:29:47.634 DBG default:    - cups: false
2023-07-27 19:29:47.634 DBG default:    - dbus: true
2023-07-27 19:29:47.634 DBG default:    - haveged: true
2023-07-27 19:29:47.634 DBG default:    - rsync: true
2023-07-27 19:29:47.634 DBG default:    - saned: false
2023-07-27 19:29:47.634 DBG default:    - smartmontools: true
2023-07-27 19:29:47.634 DBG default:    - sudo: true
2023-07-27 19:29:47.634 DBG default:    - zramswap: false
2023-07-27 19:29:47.634 DBG default:  = Storage:
2023-07-27 19:29:47.634 DBG default:    - Target: Partitions
2023-07-27 19:29:47.634 DBG default:  = Storage.Virtual Devices.Partition1:
2023-07-27 19:29:47.634 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.634 DBG default:    - Dump: false
2023-07-27 19:29:47.634 DBG default:    - Encrypt: false
2023-07-27 19:29:47.634 DBG default:    - Pass: 0
2023-07-27 19:29:47.634 DBG default:    - Size: 2191523840
2023-07-27 19:29:47.634 DBG default:  = Storage.sda.Partition1:
2023-07-27 19:29:47.634 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.634 DBG default:    - Dump: false
2023-07-27 19:29:47.634 DBG default:    - ESP: true
2023-07-27 19:29:47.634 DBG default:    - Encrypt: false
2023-07-27 19:29:47.634 DBG default:    - Pass: 0
2023-07-27 19:29:47.634 DBG default:    - Size: 104857600
2023-07-27 19:29:47.634 DBG default:  = Storage.sda.Partition2:
2023-07-27 19:29:47.634 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.634 DBG default:    - Dump: false
2023-07-27 19:29:47.634 DBG default:    - Encrypt: false
2023-07-27 19:29:47.634 DBG default:    - Pass: 0
2023-07-27 19:29:47.634 DBG default:    - Size: 16777216
2023-07-27 19:29:47.634 DBG default:  = Storage.sda.Partition3:
2023-07-27 19:29:47.634 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.634 DBG default:    - Dump: false
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Pass: 0
2023-07-27 19:29:47.635 DBG default:    - Size: 1784717246464
2023-07-27 19:29:47.635 DBG default:  = Storage.sda.Partition4:
2023-07-27 19:29:47.635 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.635 DBG default:    - Dump: false
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Pass: 0
2023-07-27 19:29:47.635 DBG default:    - Size: 624951296
2023-07-27 19:29:47.635 DBG default:  = Storage.sda.Partition5:
2023-07-27 19:29:47.635 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.635 DBG default:    - Dump: true
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Format: PRESERVE
2023-07-27 19:29:47.635 DBG default:    - Label: rootMX
2023-07-27 19:29:47.635 DBG default:    - Options: noatime
2023-07-27 19:29:47.635 DBG default:    - Pass: 1
2023-07-27 19:29:47.635 DBG default:    - Size: 214915088384
2023-07-27 19:29:47.635 DBG default:    - UseFor: /
2023-07-27 19:29:47.635 DBG default:  = Storage.sdb.Partition1:
2023-07-27 19:29:47.635 DBG default:    - Active: true
2023-07-27 19:29:47.635 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.635 DBG default:    - Dump: false
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Pass: 0
2023-07-27 19:29:47.635 DBG default:    - Size: 36875272192
2023-07-27 19:29:47.635 DBG default:  = Storage.sdb.Partition2:
2023-07-27 19:29:47.635 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.635 DBG default:    - Dump: false
2023-07-27 19:29:47.635 DBG default:    - ESP: true
2023-07-27 19:29:47.635 DBG default:    - Encrypt: false
2023-07-27 19:29:47.635 DBG default:    - Pass: 0
2023-07-27 19:29:47.635 DBG default:    - Size: 33554432
2023-07-27 19:29:47.635 DBG default:  = Storage.sdb.Partition3:
2023-07-27 19:29:47.636 DBG default:    - CheckBadBlocks: false
2023-07-27 19:29:47.636 DBG default:    - Dump: false
2023-07-27 19:29:47.636 DBG default:    - Encrypt: false
2023-07-27 19:29:47.636 DBG default:    - Pass: 0
2023-07-27 19:29:47.636 DBG default:    - Size: 214748364800
2023-07-27 19:29:47.636 DBG default:  = Swap:
2023-07-27 19:29:47.636 DBG default:    - File: /swap/swap
2023-07-27 19:29:47.636 DBG default:    - Hibernation: false
2023-07-27 19:29:47.636 DBG default:    - Install: true
2023-07-27 19:29:47.636 DBG default:    - Size: 4096
2023-07-27 19:29:47.636 DBG default:  = User:
2023-07-27 19:29:47.636 DBG default:    - Autologin: true
2023-07-27 19:29:47.636 DBG default:    - EnableRoot: true
2023-07-27 19:29:47.636 DBG default:    - OldHomeAction: Use
2023-07-27 19:29:47.636 DBG default:    - SaveDesktop: false
2023-07-27 19:29:47.636 DBG default:    - Username: alien
2023-07-27 19:29:47.636 DBG default: End of configuration.
2023-07-27 19:29:47.637 DBG default: Exec #172: rm -rf /mnt/antiX/mnt/antiX
2023-07-27 19:29:47.657 DBG default: Exit #172: 0
2023-07-27 19:29:47.657 DBG default: Exec #173: swapon --show=NAME --noheadings
2023-07-27 19:29:47.668 DBG default: Exit #173: 0
2023-07-27 19:29:47.669 DBG default: Exec #174: umount -qR /mnt/antiX
2023-07-27 19:29:49.276 DBG default: Exit #174: 0
2023-07-27 19:29:49.276 DBG default: << void MInstall::setupAutoMount(bool) >>
2023-07-27 19:29:49.277 DBG default: Bash #175: ps -e | grep 'udisksd'
2023-07-27 19:29:49.303 DBG default: SOut #175: "   4957 ?        00:00:00 udisksd\n"
2023-07-27 19:29:49.303 DBG default: Exit #175: 0
2023-07-27 19:29:49.303 DBG default: Bash #176: grep -El '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d/*
2023-07-27 19:29:49.312 DBG default: Exit #176: 0
2023-07-27 19:29:49.312 DBG default: Exec #177: rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules
2023-07-27 19:29:49.327 DBG default: Exit #177: 0
2023-07-27 19:29:49.327 DBG default: Exec #178: udevadm control --reload
2023-07-27 19:29:49.370 DBG default: Exit #178: 0
2023-07-27 19:29:49.370 DBG default: Exec #179: service udev stop
2023-07-27 19:29:49.423 DBG default: SOut #179: "Stopping hotplug events dispatcher: systemd-udevd.\n"
2023-07-27 19:29:49.423 DBG default: Exit #179: 0
2023-07-27 19:29:49.423 DBG default: Exec #180: service udev start
2023-07-27 19:29:51.651 DBG default: SOut #180: "Starting hotplug events dispatcher: systemd-udevd.\nSynthesizing the initial hotplug events (subsystems)...done.\nSynthesizing the initial hotplug events (devices)...done.\nWaiting for /dev to be fully populated...done.\n"
2023-07-27 19:29:51.651 DBG default: Exit #180: 0
2023-07-27 19:29:51.651 DBG default: Bash #181: rm -f /run/udev/rules.d/64-md-raid-assembly.rules
2023-07-27 19:29:51.658 DBG default: Exit #181: 0
I had to recover it twice (from live media):
first I tried mx boot repair with no results (I'm using UEFI on ESP partition)
then I booted live media and tried first mx boot options, and then mx boot repair with optimal results! (I can't say if doing it twice with mx boot repair would crack it now...)
Congrats on making it thru the install anyway! :)
Top
User avatar
doodstecsonhere
Posts: 86
Joined: Sat Jun 17, 2023 10:44 am

Re: MX-23 RC3 (Xfce) Feedback thread

#100 Post by doodstecsonhere »

gRegNfo wrote: ↑Thu Jul 27, 2023 4:09 pm Since NALA has issues, and I'm always preserving my /home...
How can I stop it from being default package installer?
* Should I just uninstall it?
@gRegNfo looks like nala is no longer the default package installer for MX 23. See here the referenced quote from the RC2 release post:

"MX-Updater is back to using apt for a default backend, as nala turned out to have unforeseen issues."

Link: https://mxlinux.org/blog/mx-23-libretto ... %20issues.
Top
Locked

Return to “General”