MX-23 RC2 (Xfce) feedback thread

Message

#121 Post by **Octagon** » Sun Jul 23, 2023 2:09 am

j2mcgreg wrote: ↑Sat Jul 22, 2023 7:39 am @Octagon
We need your computer’s complete profile before we can proceed, so you need to post the output from the QSI utility. The Quick System Info (QSI) utility is located in MX Tools and its output is automatically formatted for use here in the forum. Run the QSI utility, click “Copy for Forum” at the bottom and then just paste it here in your thread.
Forum Rules

Code: Select all

System:
  Kernel: 6.1.0-10-amd64 [6.1.37-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_RC2_x64 Libretto July 15  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop Mobo: ASUSTeK model: M2N68-AM Plus v: Rev X.0x serial: <superuser required>
    BIOS: American Megatrends v: 1804 date: 08/23/2010
CPU:
  Info: model: AMD Athlon II X4 640 bits: 64 type: MCP arch: K10 level: v1 built: 2009-13
    process: AMD 45nm family: 0x10 (16) model-id: 5 stepping: 3 microcode: 0x10000C8
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 512 KiB desc: d-4x64 KiB; i-4x64 KiB
    L2: 2 MiB desc: 4x512 KiB
  Speed (MHz): avg: 3014 min/max: N/A cores: 1: 3014 2: 3014 3: 3014 4: 3014 bogomips: 24110
  Flags: ht lm nx pae sse sse2 sse3 sse4a svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: NVIDIA GM107 [GeForce GTX 750 Ti] vendor: ASUSTeK driver: nvidia v: 525.105.17
    non-free: 530.xx+ status: current (as of 2023-03) arch: Maxwell code: GMxxx process: TSMC 28nm
    built: 2014-19 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 bus-ID: 02:00.0 chip-ID: 10de:1380
    class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
    gpu: nvidia display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1200 s-dpi: 96 s-size: 508x318mm (20.00x12.52") s-diag: 599mm (23.6")
  Monitor-1: VGA-0 res: 1920x1200 hz: 60 dpi: 94 size: 519x324mm (20.43x12.76")
    diag: 612mm (24.09") modes: N/A
  API: OpenGL v: 4.6.0 NVIDIA 525.105.17 renderer: NVIDIA GeForce GTX 750 Ti/PCIe/SSE2
    direct-render: Yes
Audio:
  Device-1: NVIDIA MCP61 High Definition Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
    bus-ID: 00:05.0 chip-ID: 10de:03f0 class-ID: 0403
  Device-2: NVIDIA GM107 High Definition Audio [GeForce 940MX] vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 16 bus-ID: 02:00.1
    chip-ID: 10de:0fbc class-ID: 0403
  API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: NVIDIA MCP61 Ethernet vendor: ASUSTeK M4N68T series type: network bridge
    driver: forcedeth v: kernel modules: nvidia_current_drm,nvidia_current port: c480 bus-ID: 00:07.0
    chip-ID: 10de:03ef class-ID: 0680
  IF: eth1 state: up speed: 100 Mbps duplex: full mac: <filter>
  Device-2: Realtek RTL8169 PCI Gigabit Ethernet driver: r8169 v: kernel port: d800
    bus-ID: 01:07.0 chip-ID: 10ec:8169 class-ID: 0200
  IF: eth0 state: down mac: <filter>
Bluetooth:
  Device-1: ASUSTek Broadcom BCM20702A0 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 2-1:2
    chip-ID: 0b05:17cb class-ID: fe01 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
    sub-v: 220e hci-v: 4.0 rev: 1000
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 1.82 TiB used: 790.96 GiB (42.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD1002FAEX-00Y9A0 size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1D05
    scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST31000524AS size: 931.51 GiB block-size:
    physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: JC4B
    scheme: MBR
Partition:
  ID-1: / raw-size: 279.4 GiB size: 273.95 GiB (98.05%) used: 10.55 GiB (3.9%) fs: ext4
    dev: /dev/sdb1 maj-min: 8:17
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8 GiB used: 216.4 MiB (2.6%) priority: -2 dev: /dev/sda2
    maj-min: 8:2
Sensors:
  System Temperatures: cpu: 39.0 C mobo: 31.0 C gpu: nvidia temp: 44 C
  Fan Speeds (RPM): cpu: 2360 case-1: 0 gpu: nvidia fan: 27%
  Power: 12v: 12.65 5v: N/A 3.3v: 3.31 vbat: N/A
Repos:
  Packages: pm: dpkg pkgs: 2200 libs: 1144 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/microsoft-edge.list
    1: deb [arch=amd64] https://packages.microsoft.com/repos/edge/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirror.truenetwork.ru/mxlinux/mx/repo/ bookworm main non-free
Info:
  Processes: 248 Uptime: 14h 26m wakeups: 5 Memory: 3.82 GiB used: 2.62 GiB (68.4%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)

#122 Post by **Willem52** » Sun Jul 23, 2023 4:27 am

dolphin_oracle wrote: ↑Sat Jul 22, 2023 10:45 am
dolphin_oracle wrote: ↑Sat Jul 22, 2023 9:59 am
Willem52 wrote: ↑Sat Jul 22, 2023 9:55 am Using Linux MX 23 RC2 Xfce version.
After the last update of MX System Tools d.d. July 21, it gives here an error when using MX System Sounds setting: "This app is Xfce only".
When putting back my MX Linux backup of July 20, 2023, the error is gone! After the system updates again: The same error is back.
thanks will look into it.
just sent an update, thanks.

That was fast :) It works like a charm again, thank you!

Sun Jul 23, 2023 5:02 am

AlphaElwedritsch wrote: ↑Sat Jul 22, 2023 11:16 am is hibernation supported in rc2?
if i configure to hibernate when closing the lid in energy option, the laptop does not hibernate. worked in 21.3 without issues
thx

anybody an idea how i can activate hibernation. it is very important for me.
thx

#124 Post by **taraxacum** » Sun Jul 23, 2023 5:45 am

MX23-RC2
Error message Libre-Office-Writer Extension-Manager -Add extension:

The service com.sun.star.loader.Python cannot be instantiated at ./stoc/source/......

https://extensions.openoffice.org/en/pr ... etranslate

2023-07-23_01-21_Error message Extension Manager.png

In Libre Office Writer 7.4 in the EXTRAS/Extension Manager (Extension Management)/Extension/Add (Page Translate 2.1) tab an error message is displayed.

2023-07-23_01-23_PageTranslate Status unknown.png

By installing it afterwards in the MX-PI of >python3-uno< the problem can be solved.
Therefore my suggestion: Pre-install this package at delivery !

2023-07-23_01-29_ MXPI Installing Python3-uno.png

2023-07-23_01-40_correct installation .png

Continuation of my report with quick info and .log files attached:
viewtopic.php?p=734764#p734764

See also my post:
viewtopic.php?p=702860#p702860
viewtopic.php?p=702782#p702782

Translated with www.DeepL.com/Translator (free version)

#125 Post by **taraxacum** » Sun Jul 23, 2023 5:55 am

Continuation of my contribution:

Code: Select all

System:
  Kernel: 6.1.0-10-686-pae [6.1.38-1] arch: i686 bits: 32 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-686-pae root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_RC2_386 Libretto July 15  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Hewlett-Packard product: HP Compaq dc7800p Convertible Minitower v: N/A
    serial: <superuser required> Chassis: type: 6 serial: <superuser required>
  Mobo: Hewlett-Packard model: 0AACh serial: <superuser required> BIOS: Hewlett-Packard
    v: 786F1 v01.35 date: 10/23/2015
CPU:
  Info: model: Intel Core2 Duo E8400 bits: 64 type: MCP arch: Penryn built: 2008
    process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 6 microcode: 0x612
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 1995 min/max: 1998/3000 scaling: driver: acpi-cpufreq governor: ondemand
    cores: 1: 1995 2: 1995 bogomips: 11969
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel 82Q35 Express Integrated Graphics vendor: Hewlett-Packard driver: i915 v: kernel
    arch: Gen-4 process: Intel 65n built: 2006-07 ports: active: VGA-1 empty: none bus-ID: 00:02.0
    chip-ID: 8086:29b2 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: intel
    unloaded: fbdev,modesetting,vesa dri: i915 gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.00x9.37") s-diag: 449mm (17.69")
  Monitor-1: VGA-1 mapped: VGA1 model: HP E271i serial: <filter> built: 2014 res: 1440x900 hz: 60
    dpi: 61 gamma: 1.2 size: 600x340mm (23.62x13.39") diag: 690mm (27.2") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  API: OpenGL v: 2.1 Mesa 22.3.6 renderer: i915 (: Q35) direct-render: Yes
Audio:
  Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
  API: ALSA v: k6.1.0-10-686-pae status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel 82566DM-2 Gigabit Network vendor: Hewlett-Packard driver: e1000e v: kernel
    port: 1100 bus-ID: 00:19.0 chip-ID: 8086:10bd class-ID: 0200
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 232.89 GiB used: 7.21 GiB (3.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD2500AAKX-753CA0 size: 232.89 GiB
    block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1H15
    scheme: MBR
Partition:
  ID-1: / raw-size: 24 GiB size: 23.46 GiB (97.73%) used: 7.21 GiB (30.7%) fs: ext4 dev: /dev/sda7
    maj-min: 8:7
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8.5 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
    maj-min: 8:3
Sensors:
  System Temperatures: cpu: 44.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2069 libs: 1042 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb https://mirror.23m.com/mx-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 214 Uptime: 56m wakeups: 1 Memory: 3.8 GiB used: 1.97 GiB (51.8%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)

mxpi.log

mxpi-old.log

Back to my prewiew contribution:
viewtopic.php?p=734762#p734762

End of my contribution.

#126 Post by **fehlix** » Sun Jul 23, 2023 6:02 am

taraxacum wrote: ↑Sun Jul 23, 2023 5:45 am Therefore my suggestion: Pre-install this package at delivery !

Thanks, will be added (probably) through an update of the MXPI->Populare Apps -> LO-Installer

++EDIT++
Will adjust the LO-installer part in MXPI.
Actually, we may consider to add the package python3-uno also to buildiso - and not only to MXPI->PopApps->LO,
which would avoid that the error shows up also:

LO-error-adding-python-based-extension.jpg

when using just the English default installation and trying to add a python based LO-extension.
@dolphin_oracle
+++EDIT2+++: Send a PR to mx-packageinstaller-pkglist/bookworm (and also bullseye[master])

#127 Post by **taraxacum** » Sun Jul 23, 2023 9:24 am

MX23-RC2 - amd64 (xfce) as well as MX23-RC2 - ahs-amd64
Error message: Waiting for /dev to be fully populated....

I have created two bootsticks with mx-live-USB-maker (23.7).
As dolphin-oracle recommends, I first provided the booted demo version with the latest updates and then started the installation wizard and followed the installation process with ALT+F1. Unfortunately the process stops every time with the error message at: Waiting for /dev to be fully populated.
Black desktop with cursor flashing - no further progress.
Then only the radical method shutdown by pressing the power button for 5 sec helps.

The MX23-RC2 -i386 - versions can be installed WITHOUT problems with success !

2023-07-20_MX23RC2-32_1.jpg

I therefore suspect that the 64-bit MX software starts a wrong query to my PC and gets either no answer - or a wrong answer ?

Up to MX-19 (and predecessor versions up to MX16) the 64-bit version (of course also the i386 versions) can be installed ERROR-FREE.

2023-07-23_14-52_G-Parted.png

Same installation error message: Waiting for /dev.... also exists for MX21-64bit (the i386 version is installable without problems) !

2023-07-18_MX21.1-32_1.jpg

As a further test I tried to install the 64-bit Debian GNU-kFree-BSD. To my first surprise the pre-installation went without problems. But only up to the point where the Debian packages should be downloaded afterwards. I assume that these servers have been switched off in the meantime - The installation therefore ended incomplete.

I think it is not a problem cause with my installation media, because I had the same error messages already with previous versions of MX.Live-USB as well as with burned DVD's also last year with MX21.

On my PC I installed the latest version 1.35 Bios update.

I have just performed an installation test on another PC with an older bios previous version 1.24. The installation prompt occurred without error message and I was able to install MX23-RC2-64bit. After the query:Waiting for /dev to be fully populated the installation routine continued after about 2-3 sec. with: INIT: Version 3.06 installing.

Conclusion: I conclude that your MX software has not been adapted to the latest HP-Intel-BIOS version 1.35 yet. This must be made up for.

A similar current bios version 1.32 is also available for the further HP PC series DC7900.
I will hardly be the only PC owner with such hardware. For sure there are still several of them. After all, HP is a well-known brand manufacturer.

I hope my hints will help you to correct this error.

SP73582.txt

History.txt

Code: Select all

System:
  Kernel: 6.1.0-10-686-pae [6.1.38-1] arch: i686 bits: 32 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-686-pae root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_RC2_386 Libretto July 15  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Hewlett-Packard product: HP Compaq dc7800p Convertible Minitower v: N/A
    serial: <superuser required> Chassis: type: 6 serial: <superuser required>
  Mobo: Hewlett-Packard model: 0AACh serial: <superuser required> BIOS: Hewlett-Packard
    v: 786F1 v01.35 date: 10/23/2015
CPU:
  Info: model: Intel Core2 Duo E8400 bits: 64 type: MCP arch: Penryn built: 2008
    process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 6 microcode: 0x612
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 1995 min/max: 1998/3000 scaling: driver: acpi-cpufreq governor: ondemand
    cores: 1: 1995 2: 1995 bogomips: 11970
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not
    affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 82Q35 Express Integrated Graphics vendor: Hewlett-Packard driver: i915 v: kernel
    arch: Gen-4 process: Intel 65n built: 2006-07 ports: active: VGA-1 empty: none bus-ID: 00:02.0
    chip-ID: 8086:29b2 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: intel
    unloaded: fbdev,modesetting,vesa dri: i915 gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.00x9.37") s-diag: 449mm (17.69")
  Monitor-1: VGA-1 mapped: VGA1 model: HP E271i serial: <filter> built: 2014 res: 1440x900 hz: 60
    dpi: 61 gamma: 1.2 size: 600x340mm (23.62x13.39") diag: 690mm (27.2") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  API: OpenGL v: 2.1 Mesa 22.3.6 renderer: i915 (: Q35) direct-render: Yes
Audio:
  Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
  API: ALSA v: k6.1.0-10-686-pae status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel 82566DM-2 Gigabit Network vendor: Hewlett-Packard driver: e1000e v: kernel
    port: 1100 bus-ID: 00:19.0 chip-ID: 8086:10bd class-ID: 0200
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 698.65 GiB used: 18.35 GiB (2.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD2500AAKX-753CA0 size: 232.89 GiB
    block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1H15
    scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Toshiba model: MQ01ABD050 size: 465.76 GiB
    block-size: physical: 512 B logical: 512 B type: HDD rpm: 5400 serial: <filter> rev: AX00
    scheme: MBR
Partition:
  ID-1: / raw-size: 24 GiB size: 23.46 GiB (97.73%) used: 7.41 GiB (31.6%) fs: ext4 dev: /dev/sda7
    maj-min: 8:7
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8.5 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
    maj-min: 8:3
Sensors:
  System Temperatures: cpu: 43.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2070 libs: 1042 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb https://mirror.23m.com/mx-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 227 Uptime: 26m wakeups: 1 Memory: 3.8 GiB used: 1.71 GiB (45.0%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)

#128 Post by **vitforlinux** » Sun Jul 23, 2023 10:03 am

I attempted to upgrade freshly installed MX 21.3 minimal to MX 23 RC 2 via apt dist-upgrade and succeeded, apart from the Grub/os-prober issue in Debian 12, which I fixed anyway.

The thing that displeases me the most is that the boot writes Debian 12 instead of MX 23 Libretto.

However, we should try with a more used system, I think Chrome and Nvidia drivers would give it some problems.

Below what I wrote in the terminal

Code: Select all

sudo sed -i 's/bullseye/bookworm/g' /etc/apt/sources.list.d/*.list
sudo sed -i 's/non-free/non-free non-free-firmware/g' /etc/apt/sources.list.d/debian.list
wget https://mxrepo.com/mx/repo/pool/main/m/mx23-archive-keyring/mx23-archive-keyring_2023.6.6_all.deb && sudo apt install ./mx23-archive-keyring_2023.6.6_all.deb
sudo apt update
sudo apt dist-upgrade

echo "GRUB_DISABLE_OS_PROBER=false" | sudo tee /etc/default/grub.d/os-prober-enable.cfg && sudo update-grub

After that it was necessary to fix the grub and plymouth theme with Boot Options.

#129 Post by **mklym** » Sun Jul 23, 2023 11:01 am

AlphaElwedritsch wrote: ↑Sun Jul 23, 2023 5:02 am
AlphaElwedritsch wrote: ↑Sat Jul 22, 2023 11:16 am is hibernation supported in rc2?
if i configure to hibernate when closing the lid in energy option, the laptop does not hibernate. worked in 21.3 without issues
thx

anybody an idea how i can activate hibernation. it is very important for me.
thx

I have hibernation enabled and have no issues when I select the 'Log Out' icon, click on 'Hibernation' and when the screen goes blank, I shut the lid. When I open the lid, I get login scree in about 15 seconds. I do not like to set the unit to hibernate when I close the lid, have had too many issues over the years doing hibernation with that method.

Code: Select all

System:
  Kernel: 6.3.0-2mx-ahs-amd64 [6.3.11-1~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.3.0-2mx-ahs-amd64 root=UUID=<filter> ro quiet splash
    resume=UUID=<filter> resume_offset=23173120
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_ahs_RC2_x64 Libretto July 15  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: Panasonic product: CF-31SBM61DM v: 003 serial: <superuser required> Chassis:
    type: 10 v: 001 serial: <superuser required>
  Mobo: Panasonic model: CF31-3 v: 1 serial: <superuser required> BIOS: American Megatrends
    v: 3.00L13 date: 09/11/2012
Battery:
  ID-1: BAT1 charge: 72.2 Wh (99.2%) condition: 72.8/72.8 Wh (100.0%) volts: 11.7 min: 10.7
    model: Panasonic CF-VZSU46 type: Li-ion serial: <filter> status: not charging
CPU:
  Info: model: Intel Core i5-3320M bits: 64 type: MT MCP arch: Ivy Bridge gen: core 3 level: v2
    built: 2012-15 process: Intel 22nm family: 6 model-id: 0x3A (58) stepping: 9 microcode: 0x21
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 1605 high: 2054 min/max: 1200/3300 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 1476 2: 1257 3: 1634 4: 2054 bogomips: 20751
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
    filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Vulnerable: No microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 3rd Gen Core processor Graphics vendor: Matsushita driver: i915 v: kernel
    arch: Gen-7 process: Intel 22nm built: 2012-13 ports: active: LVDS-1 empty: DP-1, DP-2,
    HDMI-A-1, HDMI-A-2, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0166 class-ID: 0300
  Device-2: Z-Star Micro Venus USB2.0 Camera type: USB driver: uvcvideo bus-ID: 1-1.5:4
    chip-ID: 0ac8:3420 class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.63x7.99") s-diag: 338mm (13.3")
  Monitor-1: LVDS-1 res: 1024x768 hz: 60 size: N/A modes: 1024x768
  API: OpenGL v: 4.2 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 4000 (IVB GT2)
    direct-render: Yes
Audio:
  Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Matsushita 7
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
  API: ALSA v: k6.3.0-2mx-ahs-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel 82579LM Gigabit Network vendor: Matsushita driver: e1000e v: kernel port: f080
    bus-ID: 00:19.0 chip-ID: 8086:1502 class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: Intel Centrino Advanced-N 6235 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 09:00.0 chip-ID: 8086:088e class-ID: 0280
  IF: wlan0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel Centrino Bluetooth Wireless Transceiver type: USB driver: btusb v: 0.8
    bus-ID: 2-1.7:3 chip-ID: 8087:07da class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
    sub-v: fc00 hci-v: 4.0 rev: 1ebd
  Info: acl-mtu: 310:10 sco-mtu: 64:8 link-policy: rswitch hold sniff park
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 223.57 GiB used: 18.54 GiB (8.3%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Intel model: SSDSC2CT240A4 size: 223.57 GiB block-size:
    physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 335u scheme: MBR
Partition:
  ID-1: / raw-size: 223.56 GiB size: 218.99 GiB (97.96%) used: 18.54 GiB (8.5%) fs: ext4
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 10.62 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 64.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2066 libs: 1050 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirror.it.ubc.ca/mxlinux/mx/repo/ bookworm main non-free
    2: deb http://mirror.it.ubc.ca/mxlinux/mx/repo/ bookworm ahs
Info:
  Processes: 228 Uptime: 22m wakeups: 2 Memory: 7.62 GiB used: 1.86 GiB (24.4%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)

#130 Post by **Eadwine Rose** » Sun Jul 23, 2023 11:42 am

Please everyone, move over to testing RC3, thanks for your help!
viewtopic.php?t=76098

MX Linux Forum

MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread

Re: MX-23 RC2 (Xfce) feedback thread