I think this is it. sdb is the boot thumb drive. Also sdc is listed but doesn't exist.dolphin_oracle wrote: Fri Jul 14, 2023 2:34 pm There is a bug in the installer that will wipe the ESP partition of the live-usb despite it not being selected (or even present) in the custom partition area.
edit: the thumb drive was altered and now only boots in Legacy mode.
8bit
BTW, This is the prettiest desktop MX has ever released, IMHO. Well done everyone. Just so much to like, nomacs as the default image viewer...
Taken at the time of installing:
Code: Select all
System:
Kernel: 6.1.0-10-amd64 [6.1.37-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_RC1_x64 Libretto July 13 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop System: Dell product: Precision 3630 Tower v: N/A serial: <superuser required>
Chassis: type: 3 serial: <superuser required>
Mobo: Dell model: 0Y2K8N v: A00 serial: <superuser required> UEFI: Dell v: 2.15.0
date: 07/04/2022
CPU:
Info: model: Intel Core i5-8600 bits: 64 type: MCP arch: Coffee Lake gen: core 8 level: v3
note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 0xA (10)
microcode: 0xF0
Topology: cpus: 1x cores: 6 smt: <unsupported> cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB
L2: 1.5 MiB desc: 6x256 KiB L3: 9 MiB desc: 1x9 MiB
Speed (MHz): avg: 3100 min/max: 800/4300 scaling: driver: intel_pstate governor: powersave
cores: 1: 3100 2: 3100 3: 3100 4: 3100 5: 3100 6: 3100 bogomips: 37199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel CoffeeLake-S GT2 [UHD Graphics 630] vendor: Dell driver: i915 v: kernel
arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: none empty: DP-1, DP-2, DP-3,
HDMI-A-1, HDMI-A-2, HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:3e92 class-ID: 0380
Device-2: NVIDIA GK107 [NVS 510] driver: nouveau v: kernel non-free: series: 470.xx+
status: legacy-active (EOL~2023/24) arch: Kepler code: GKxxx process: TSMC 28nm built: 2012-18
pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s ports: active: DP-6,DP-7
empty: DP-4,DP-5 bus-ID: 01:00.0 chip-ID: 10de:0ffd class-ID: 0300 temp: 48.0 C
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.00x11.22")
s-diag: 1055mm (41.54")
Monitor-1: DP-6 pos: primary,left model: Dell P2217H serial: <filter> built: 2019
res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2 size: 476x267mm (18.74x10.51") diag: 546mm (21.5")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
Monitor-2: DP-7 pos: right model: Dell P2217H serial: <filter> built: 2019 res: 1920x1080
hz: 60 dpi: 102 gamma: 1.2 size: 476x267mm (18.74x10.51") diag: 546mm (21.5") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: OpenGL v: 4.3 Mesa 22.3.6 renderer: NVE7 direct-render: Yes
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: Dell driver: snd_hda_intel v: kernel
alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3 chip-ID: 8086:a348 class-ID: 0403
Device-2: NVIDIA GK107 HDMI Audio driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1 chip-ID: 10de:0e1b class-ID: 0403
API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
chip-ID: 8086:15bb class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 262.36 GiB used: 2.03 GiB (0.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 3B2QGXA7 temp: 34.9 C
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD UM410 Series 2.5 16GB size: 14.91 GiB
block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s type: SSD serial: <filter> rev: 2D1Q
ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Kingston model: DataTraveler 2.0 size: 14.56 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 0000
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 31.06 GiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 41.0 C pch: 48.0 C mobo: 41.0 C gpu: nouveau temp: 48.0 C
Fan Speeds (RPM): cpu: 1795 fan-2: 913 fan-3: 1200 gpu: nouveau fan: 2970
Repos:
Packages: pm: dpkg pkgs: 2067 libs: 1047 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 246 Uptime: 14m wakeups: 4 Memory: 31.06 GiB used: 1.58 GiB (5.1%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
