2 video cards found

[faithflux]

I have a Minisforum Neptune HX99G. This mini PC has AMD Radeon™ RX 6600M dedicated video card and a AMD Ryzen™ 9 6900HX Processor with GPU as well (AMD Radeon™ 680M).
At live boot I get a screen to select one. MX Linux will only boot from the processor graphic not from the dedicated AMD Radeon™ RX 6600M. Don't know why. If I select this one,
My monitor will go black and it gets like disconnected. Any ideas?

[Eadwine Rose]

Please post your Quick System Info using Copy for forum, thanks.

[faithflux]

Sorry for the delay. I been working too much. Here's the output of Quick System Info

Code: Select all

System:
  Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_beta2_x64 Libretto June 15  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Micro (HK) Tech product: HX99G v: N/A serial: <superuser required>
  Mobo: Shenzhen Meigao Equipment model: F7BAA serial: <superuser required> UEFI: American
    Megatrends LLC. v: 0.18 date: 03/02/2023
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse MX Master 3 serial: <filter> charge: 100%
    (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Ryzen 9 6900HX with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3+ gen: 4
    level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25) model-id: 0x44 (68)
    stepping: 1 microcode: 0xA404102
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
    desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 1510 high: 1801 min/max: 1600/4934 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1511 2: 1415 3: 1799 4: 1801 5: 1376 6: 1420
    7: 1484 8: 1600 9: 1377 10: 1547 11: 1385 12: 1600 13: 1355 14: 1514 15: 1385 16: 1600
    bogomips: 105402
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: AMD Navi 23 [Radeon RX 6600/6600 XT/6600M] driver: amdgpu v: kernel arch: RDNA-2
    code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports:
    active: none empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 03:00.0 chip-ID: 1002:73ff
    class-ID: 0300
  Device-2: AMD Rembrandt [Radeon 680M] driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
    process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-4
    empty: DP-3, DP-5, DP-6, DP-7, DP-8, DP-9, eDP-1 bus-ID: e8:00.0 chip-ID: 1002:1681
    class-ID: 0300 temp: 37.0 C
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: amdgpu
    unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x571mm (40.00x22.48")
    s-diag: 1165mm (45.88")
  Monitor-1: DP-4 mapped: DisplayPort-3 model: HP U32 4K HDR serial: <filter> built: 2022
    res: 3840x2160 hz: 60 dpi: 138 gamma: 1.2 size: 709x411mm (27.91x16.18") diag: 820mm (32.3")
    ratio: 16:9 modes: max: 3840x2160 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon Graphics (rembrandt LLVM 15.0.6 DRM 3.49
    6.1.0-9-amd64) direct-render: Yes
Audio:
  Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: bus-ID: 3-3:2
    chip-ID: 0d8c:0014 gen: 4 speed: 16 GT/s class-ID: 0300 lanes: 16 bus-ID: 03:00.1
    chip-ID: 1002:ab28 class-ID: 0403
  Device-2: AMD Rembrandt Radeon High Definition Audio driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 16 bus-ID: e8:00.1 chip-ID: 1002:1640 class-ID: 0403
  Device-3: AMD ACP/ACP3X/ACP6x Audio Coprocessor driver: snd_pci_acp6x v: kernel
    alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: e8:00.5 chip-ID: 1022:15e2 class-ID: 0480
  Device-4: AMD Family 17h/19h HD Audio vendor: Realtek driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 16 bus-ID: e8:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Device-5: C-Media Audio Adapter (Unitek Y-247A) type: USB
    driver: cmedia_hs100b,snd-usb-audio,usbhid
  API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I225-V driver: igc v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1
    port: N/A bus-ID: 04:00.0 chip-ID: 8086:15f3 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: MEDIATEK MT7921K Wi-Fi 6E 80MHz driver: mt7921e v: kernel modules: wl pcie: gen: 2
    speed: 5 GT/s lanes: 1 bus-ID: 06:00.0 chip-ID: 14c3:0608 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: MediaTek Wireless_Device type: USB driver: btusb v: 0.8 bus-ID: 5-3:3
    chip-ID: 0e8d:0608 class-ID: e001 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 2302 hci-v: 5.2 rev: 119
  Info: acl-mtu: 1021:6 sco-mtu: 240:8 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 2.3 TiB used: 0 KiB (0.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: OM8PGP41024Q-A0 size: 953.87 GiB
    block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: ELFK0S.6 temp: 46.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Samsung model: SSD 870 EVO 1TB size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> scheme: MBR
  ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: SSD 860 EVO 500GB
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter>
    scheme: GPT
  ID-4: /dev/sdc maj-min: 8:32 type: USB vendor: PNY model: USB 2.0 FD size: 7.55 GiB block-size:
    physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 8192 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  Message: No partition data found.
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 2.02 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdb4
    maj-min: 8:20
Sensors:
  System Temperatures: cpu: 41.2 C mobo: N/A
  Fan Speeds (RPM): N/A
  GPU: device: amdgpu temp: 36.0 C device: amdgpu temp: 38.0 C mem: 38.0 C fan: 0 watts: 3.00
Repos:
  Packages: pm: dpkg pkgs: 2056 libs: 1041 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
  Processes: 376 Uptime: 20m wakeups: 3 Memory: 30.63 GiB used: 3.17 GiB (10.4%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
  v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
SecureBoot enabled

[j2mcgreg]

I think that you should reinstall using Mx 21.3 AHS and then use MXPI to upgrade to one of the Liquorix 6.2.xxx or 6.3.xxx kernels. These are options that aren't available in the beta.

[Charlie Brown]

SecureBoot enabled

[Eadwine Rose]

Please post feedback about the beta in the designated beta thread, thank you.

viewtopic.php?t=75619

[Stevo]

In case anyone later finds this thread, if you want to use the discrete GPU only, can you disable the integrated one in the UEFI setup?