MX-23 beta 1 feedback thread

[operadude]

Thanks @dolphin_oracle :

I really like the logout sound, so thanks for looking into it.

Please point me in the right direction, if I can help with this!

@dolphin_oracle :
Just remembered:

I think MX-23 Alpha2 (Xfce, x64) has the logout sound.
I'll double-check.

Don't know if that helps you.

Let me know if I can help in any way!

the root problem is that Xfce does not actually support the login/logout event sounds. So we work around it.

so the way the original setup worked, the logout sound was played by an "autostart" file that is triggered by logout/reboot/shutdown. The problem as I see it is that with pipewire its very likely teh sound server will be shutdown before the logout sound is played. during alpha we had reports that the logout sound never played despite being configured.

So I removed the feature because I would rather not have it than have it broken.

Ahhh...Too Bad
I really liked that nice "Borealis" sound letting me know that it's time for Biological Halt. Like Being Tucked-In!

[siamhie]

@dolphin_oracle I no longer have sound again and the volume icon doesn't show in the systray after the latest pipewire update.

pipewire2.png

Seems wireplumber isn't starting again.


This is from my systemctl status

Code: Select all

           └─user.slice
             └─user-1000.slice
               ├─session-1.scope
               │ ├─1655 lightdm --session-child 13 16
               │ ├─1684 fluxbox
               │ ├─1721 /usr/bin/dbus-launch --exit-with-session --sh-syntax
               │ ├─1722 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
               │ ├─1774 /usr/bin/ssh-agent /usr/bin/startfluxbox
               │ ├─1795 compton
               │ ├─1801 tint2 -c /home/siamhie/.config/tint2/tint2rc
               │ ├─1802 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
               │ ├─1806 nm-applet
               │ ├─1826 /usr/libexec/gvfsd
               │ ├─1831 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
               │ ├─2008 xfce4-clipman
               │ ├─2009 /usr/libexec/at-spi-bus-launcher --launch-immediately
               │ ├─2015 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork>
               │ ├─2021 /usr/libexec/xdg-desktop-portal
               │ ├─2026 /usr/libexec/xdg-document-portal
               │ ├─2030 /usr/libexec/xdg-permission-store
               │ ├─2036 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000>
               │ ├─2041 /usr/libexec/xdg-desktop-portal-gtk
               │ ├─2055 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
               │ ├─2060 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
               │ ├─2065 corectrl
               │ ├─2066 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
               │ ├─2282 conky -c /home/siamhie/.conky/R8/r8
               │ ├─2356 /usr/libexec/at-spi2-registryd --use-gnome-session
               │ ├─2430 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
               │ ├─2839 /usr/bin/thunar file:///home/siamhie/
               │ ├─2845 /usr/libexec/gvfs-udisks2-volume-monitor
               │ ├─2856 /usr/libexec/gvfs-afc-volume-monitor
               │ ├─2862 /usr/libexec/gvfs-mtp-volume-monitor
               │ ├─2867 /usr/libexec/gvfs-goa-volume-monitor
               │ ├─2872 /usr/libexec/gvfs-gphoto2-volume-monitor
               │ ├─2877 /usr/libexec/gvfsd-metadata
               │ ├─2887 /usr/libexec/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0
               │ ├─2898 /usr/lib/x86_64-linux-gnu/tumbler-1/tumblerd
               │ ├─3960 xfce4-terminal
               │ ├─3982 bash
               │ ├─4343 systemctl status
               │ └─4344 pager
               └─user@1000.service
                 ├─app.slice
                 │ └─gnome-keyring-daemon.service
                 │   └─2072 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-direc>
                 ├─init.scope
                 │ ├─1664 /lib/systemd/systemd --user
                 │ └─1665 "(sd-pam)"
                 └─session.slice
                   ├─pipewire-pulse.service
                   │ └─1682 /usr/bin/pipewire-pulse
                   └─pipewire.service
                     └─1680 /usr/bin/pipewire

QSI

Code: Select all

System:
  Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
    root=UUID=<filter> ro quiet splash amdgpu.ppfeaturemask=0xffffffff
    init=/lib/systemd/systemd
  Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
    Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Desktop System: Micro-Star product: MS-7C56 v: 2.0 serial: <superuser required>
  Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 2.0 serial: <superuser required> UEFI: American
    Megatrends LLC. v: A.B0 date: 08/11/2022
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Ryzen 7 3800X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
    built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
    microcode: 0x8701021
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
    desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 32 MiB desc: 2x16 MiB
  Speed (MHz): avg: 2237 high: 2800 min/max: 2200/4559 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2200 3: 2200 4: 2200 5: 2200 6: 2197
    7: 2200 8: 2200 9: 2200 10: 2200 11: 2196 12: 2800 13: 2200 14: 2200 15: 2200 16: 2200
    bogomips: 124804
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT] vendor: Tul / PowerColor
    driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
    gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 0b:00.0
    chip-ID: 1002:73df class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: Compton v: 1 driver: X: loaded: amdgpu
    dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
  Monitor-1: DP-1 mapped: DisplayPort-0 model: HP X27q serial: <filter> built: 2021
    res: 2560x1440 hz: 165 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
    ratio: 16:9 modes: max: 2560x1440 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 6700 XT (navi22 LLVM 15.0.6 DRM 3.49
    6.1.0-9-amd64) direct-render: Yes
Audio:
  Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
    speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
    pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
  API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel modules: wl pcie:
    gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2725 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX210 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-2.3:4 chip-ID: 8087:0032
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
Drives:
  Local Storage: total: 8.19 TiB used: 876.49 GiB (10.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Western Digital model: WDS500G1X0E-00AFY0
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
    serial: <filter> rev: 613000WD temp: 38.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital model: WDS500G3XHC-00SJG0
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
    serial: <filter> rev: 102000WD temp: 38.9 C scheme: GPT
  ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: ST8000DM004-2CX188 size: 7.28 TiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5425 serial: <filter>
    rev: 0001 scheme: GPT
Partition:
  ID-1: / raw-size: 100.26 GiB size: 98.13 GiB (97.87%) used: 7.78 GiB (7.9%) fs: ext4
    dev: /dev/nvme0n1p3 maj-min: 259:6
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 572 KiB (0.1%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:4
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 65 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme1n1p1
    maj-min: 259:1
Sensors:
  System Temperatures: cpu: 36.8 C mobo: N/A gpu: amdgpu temp: 40.0 C mem: 44.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1122
Repos:
  Packages: pm: dpkg pkgs: 1923 libs: 984 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
    pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/librewolf.list
    1: deb [arch=amd64] http://deb.librewolf.net bullseye main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
  Processes: 339 Uptime: 16m wakeups: 2 Memory: 31.27 GiB used: 2.16 GiB (6.9%) Init: systemd
  v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

[dolphin_oracle]

@dolphin_oracle I no longer have sound again and the volume icon doesn't show in the systray after the latest pipewire update.


pipewire2.png


Seems wireplumber isn't starting again.


This is from my systemctl status

Code: Select all

           └─user.slice
             └─user-1000.slice
               ├─session-1.scope
               │ ├─1655 lightdm --session-child 13 16
               │ ├─1684 fluxbox
               │ ├─1721 /usr/bin/dbus-launch --exit-with-session --sh-syntax
               │ ├─1722 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
               │ ├─1774 /usr/bin/ssh-agent /usr/bin/startfluxbox
               │ ├─1795 compton
               │ ├─1801 tint2 -c /home/siamhie/.config/tint2/tint2rc
               │ ├─1802 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
               │ ├─1806 nm-applet
               │ ├─1826 /usr/libexec/gvfsd
               │ ├─1831 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
               │ ├─2008 xfce4-clipman
               │ ├─2009 /usr/libexec/at-spi-bus-launcher --launch-immediately
               │ ├─2015 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork>
               │ ├─2021 /usr/libexec/xdg-desktop-portal
               │ ├─2026 /usr/libexec/xdg-document-portal
               │ ├─2030 /usr/libexec/xdg-permission-store
               │ ├─2036 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000>
               │ ├─2041 /usr/libexec/xdg-desktop-portal-gtk
               │ ├─2055 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
               │ ├─2060 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
               │ ├─2065 corectrl
               │ ├─2066 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
               │ ├─2282 conky -c /home/siamhie/.conky/R8/r8
               │ ├─2356 /usr/libexec/at-spi2-registryd --use-gnome-session
               │ ├─2430 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
               │ ├─2839 /usr/bin/thunar file:///home/siamhie/
               │ ├─2845 /usr/libexec/gvfs-udisks2-volume-monitor
               │ ├─2856 /usr/libexec/gvfs-afc-volume-monitor
               │ ├─2862 /usr/libexec/gvfs-mtp-volume-monitor
               │ ├─2867 /usr/libexec/gvfs-goa-volume-monitor
               │ ├─2872 /usr/libexec/gvfs-gphoto2-volume-monitor
               │ ├─2877 /usr/libexec/gvfsd-metadata
               │ ├─2887 /usr/libexec/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0
               │ ├─2898 /usr/lib/x86_64-linux-gnu/tumbler-1/tumblerd
               │ ├─3960 xfce4-terminal
               │ ├─3982 bash
               │ ├─4343 systemctl status
               │ └─4344 pager
               └─user@1000.service
                 ├─app.slice
                 │ └─gnome-keyring-daemon.service
                 │   └─2072 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-direc>
                 ├─init.scope
                 │ ├─1664 /lib/systemd/systemd --user
                 │ └─1665 "(sd-pam)"
                 └─session.slice
                   ├─pipewire-pulse.service
                   │ └─1682 /usr/bin/pipewire-pulse
                   └─pipewire.service
                     └─1680 /usr/bin/pipewire

QSI

Code: Select all

System:
  Kernel: 6.1.0-9-amd64 [6.1.27-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-9-amd64
    root=UUID=<filter> ro quiet splash amdgpu.ppfeaturemask=0xffffffff
    init=/lib/systemd/systemd
  Desktop: Fluxbox v: 1.3.7 info: tint2 vt: 7 dm: LightDM v: 1.26.0
    Distro: MX-23_fluxbox_beta1_x64 Libretto May 28 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Desktop System: Micro-Star product: MS-7C56 v: 2.0 serial: <superuser required>
  Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 2.0 serial: <superuser required> UEFI: American
    Megatrends LLC. v: A.B0 date: 08/11/2022
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Ryzen 7 3800X bits: 64 type: MT MCP arch: Zen 2 gen: 3 level: v3 note: check
    built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x71 (113) stepping: 0
    microcode: 0x8701021
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
    desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 32 MiB desc: 2x16 MiB
  Speed (MHz): avg: 2237 high: 2800 min/max: 2200/4559 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 2200 2: 2200 3: 2200 4: 2200 5: 2200 6: 2197
    7: 2200 8: 2200 9: 2200 10: 2200 11: 2196 12: 2800 13: 2200 14: 2200 15: 2200 16: 2200
    bogomips: 124804
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT] vendor: Tul / PowerColor
    driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
    gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 0b:00.0
    chip-ID: 1002:73df class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: Compton v: 1 driver: X: loaded: amdgpu
    dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00") s-diag: 777mm (30.58")
  Monitor-1: DP-1 mapped: DisplayPort-0 model: HP X27q serial: <filter> built: 2021
    res: 2560x1440 hz: 165 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27")
    ratio: 16:9 modes: max: 2560x1440 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 6700 XT (navi22 LLVM 15.0.6 DRM 3.49
    6.1.0-9-amd64) direct-render: Yes
Audio:
  Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie: gen: 4
    speed: 16 GT/s lanes: 16 bus-ID: 0b:00.1 chip-ID: 1002:ab28 class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
    pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 14:00.4 chip-ID: 1022:1487 class-ID: 0403
  API: ALSA v: k6.1.0-9-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: off 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel modules: wl pcie:
    gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2725 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel AX210 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-2.3:4 chip-ID: 8087:0032
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter>
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
Drives:
  Local Storage: total: 8.19 TiB used: 876.49 GiB (10.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Western Digital model: WDS500G1X0E-00AFY0
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
    serial: <filter> rev: 613000WD temp: 38.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Western Digital model: WDS500G3XHC-00SJG0
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
    serial: <filter> rev: 102000WD temp: 38.9 C scheme: GPT
  ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: ST8000DM004-2CX188 size: 7.28 TiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5425 serial: <filter>
    rev: 0001 scheme: GPT
Partition:
  ID-1: / raw-size: 100.26 GiB size: 98.13 GiB (97.87%) used: 7.78 GiB (7.9%) fs: ext4
    dev: /dev/nvme0n1p3 maj-min: 259:6
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 572 KiB (0.1%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:4
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 65 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme1n1p1
    maj-min: 259:1
Sensors:
  System Temperatures: cpu: 36.8 C mobo: N/A gpu: amdgpu temp: 40.0 C mem: 44.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1122
Repos:
  Packages: pm: dpkg pkgs: 1923 libs: 984 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
    pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/librewolf.list
    1: deb [arch=amd64] http://deb.librewolf.net bullseye main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://la.mxrepo.com/mx/repo/ bookworm main non-free
Info:
  Processes: 339 Uptime: 16m wakeups: 2 Memory: 31.27 GiB used: 2.16 GiB (6.9%) Init: systemd
  v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

please check to see if the wireplumber service is enabled under systemd. systemd should be starting it.

[siamhie]

@dolphin_oracle In the meantime I'm using a quick and dirty fix. I'm manually starting wireplumber at boot for now in my startup file. Sound works again.

Code: Select all

#start pipewire before volumeicon so unmute works
wireplumber &
pipewire-start
sleep 2
volumeicon -c volumeicon-fluxbox & 

[Melber]

...Changing mouse cursors. I installed the oxygen cursor set but couldn't change the cursors from Appearance>Theme and Customize Look and Feel is missing from All Apps>Settings.
I changed it from the terminal but the mouse cursor changes back to DMX-Black when using my browser.

Did you try manually editing these entries in ~/gtkrc-2.0

Code: Select all

gtk-cursor-theme-name="DMZ-Black" 
gtk-cursor-theme-size=0

and ~/.config/gtk-3.0/settings.ini ?

Code: Select all

gtk-cursor-theme-name=DMZ-Black 
gtk-cursor-theme-size=0

@Melber All I have in the gtk-2.0 directory is this

Code: Select all

siamhie@mxflux23:~/.config/gtk-2.0
$ ls -a
.  ..  gtkfilechooser.ini

...

@siamhie gtkrc-2.0 is a file that lives in the home directory.
Has pretty much the same content as ~/.config/gtk-3.0/settings.ini, except that the theme names are quoted

[operadude]

trying out MX23-KDE. so far looks good will test more today. But no major problems as yet.
good work :)

@operadude. Nice radio :)

@kc1di :Thanks!
Dig the Analog, Dude!

Continuing to test Beta-1 (Xfce). So far, so good!
Also, Loving the Logo -- @ Startup & Shutdown: Nice effects!
Don't know if I mentioned it earlier, but very cool modified apt Updater!

[siamhie]

please check to see if the wireplumber service is enabled under systemd. systemd should be starting it.

@dolphin_oracle It doesn't get loaded at boot.

Code: Select all

systemctl --type=service 
  UNIT                               LOAD   ACTIVE SUB     DESCRIPTION                                     >
  accounts-daemon.service            loaded active running Accounts Service
  acpi-fakekey.service               loaded active running ACPI fakekey daemon
  acpid.service                      loaded active running ACPI event daemon
  alsa-restore.service               loaded active exited  Save/Restore Sound Card State
  avahi-daemon.service               loaded active running Avahi mDNS/DNS-SD Stack
  blk-availability.service           loaded active exited  Availability of block devices
  bluetooth.service                  loaded active running Bluetooth service
  console-setup.service              loaded active exited  Set console font and keymap
  cpufrequtils.service               loaded active exited  LSB: set CPUFreq kernel parameters
  cron.service                       loaded active running Regular background program processing daemon
  cups-browsed.service               loaded active running Make remote CUPS printers available locally
  dbus.service                       loaded active running D-Bus System Message Bus
  emby-server.service                loaded active running Emby Server is a personal media server with apps>
  getty@tty1.service                 loaded active running Getty on tty1
  haveged.service                    loaded active running Entropy Daemon based on the HAVEGE algorithm
  hwclock-mx.service                 loaded active exited  save system clock if not running live
  ifupdown-pre.service               loaded active exited  Helper to synchronize boot up for ifupdown
  keyboard-setup.service             loaded active exited  Set the console keyboard layout
  kmod-static-nodes.service          loaded active exited  Create List of Static Device Nodes
  lightdm.service                    loaded active running Light Display Manager
  lm-sensors.service                 loaded active exited  Initialize hardware monitoring sensors
  loadcpufreq.service                loaded active exited  LSB: Load kernel modules needed to enable cpufre>
  lvm2-monitor.service               loaded active exited  Monitoring of LVM2 mirrors, snapshots etc. using>
  ModemManager.service               loaded active running Modem Manager
  network-manager.service            loaded active running LSB: network connection manager
  networking.service                 loaded active exited  Raise network interfaces
  NetworkManager.service             loaded failed failed  Network Manager
  nfs-blkmap.service                 loaded active running pNFS block layout mapping daemon
  nfs-idmapd.service                 loaded active running NFSv4 ID-name mapping service
  nfs-mountd.service                 loaded active running NFS Mount Daemon
  nfs-server.service                 loaded active exited  NFS server and services
  nfsdcld.service                    loaded active running NFSv4 Client Tracking Daemon
  ntpsec.service                     loaded active running Network Time Service
  openvpn.service                    loaded active exited  OpenVPN service
  plymouth-quit-wait.service         loaded active exited  Hold until boot process finishes up
  plymouth-read-write.service        loaded active exited  Tell Plymouth To Write Out Runtime Data
  plymouth-start.service             loaded active exited  Show Plymouth Boot Screen
  polkit.service                     loaded active running Authorization Manager
  rc-local.service                   loaded active exited  /etc/rc.local Compatibility
  rpc-statd-notify.service           loaded active exited  Notify NFS peers of a restart
  rpc-statd.service                  loaded active running NFS status monitor for NFSv2/3 locking.
  rpcbind.service                    loaded active running RPC bind portmap service
  rsyslog.service                    loaded active running System Logging Service
  smartmontools.service              loaded active running Self Monitoring and Reporting Technology (SMART)>
  systemd-binfmt.service             loaded active exited  Set Up Additional Binary Formats
  systemd-journal-flush.service      loaded active exited  Flush Journal to Persistent Storage
  systemd-journald.service           loaded active running Journal Service
  systemd-logind.service             loaded active running User Login Management
  systemd-modules-load.service       loaded active exited  Load Kernel Modules
  systemd-random-seed.service        loaded active exited  Load/Save Random Seed
  systemd-remount-fs.service         loaded active exited  Remount Root and Kernel File Systems
  systemd-sysctl.service             loaded active exited  Apply Kernel Variables
  systemd-sysusers.service           loaded active exited  Create System Users
  systemd-tmpfiles-setup-dev.service loaded active exited  Create Static Device Nodes in /dev
  systemd-tmpfiles-setup.service     loaded active exited  Create Volatile Files and Directories
  systemd-udev-trigger.service       loaded active exited  Coldplug All udev Devices
  systemd-udevd.service              loaded active running Rule-based Manager for Device Events and Files
  systemd-update-utmp.service        loaded active exited  Record System Boot/Shutdown in UTMP
  systemd-user-sessions.service      loaded active exited  Permit User Sessions
  tlp.service                        loaded active exited  TLP system startup/shutdown
  udisks2.service                    loaded active running Disk Manager
  ufw.service                        loaded active exited  Uncomplicated firewall
  unattended-upgrades.service        loaded active running Unattended Upgrades Shutdown
  user-runtime-dir@1000.service      loaded active exited  User Runtime Directory /run/user/1000
  user@1000.service                  loaded active running User Manager for UID 1000
  wpa_supplicant.service             loaded active running WPA supplicant

I also can't get it to start.

Code: Select all

$ systemctl start wireplumber.service
Failed to start wireplumber.service: Unit wireplumber.service not found.

[dolphin_oracle]

its a user service, like pipewire. which also isn't in your list @siamhie

[siamhie]

its a user service, like pipewire. which also isn't in your list @siamhie

@dolphin_oracle pipewire shows at the bottom. Is that what you were referring to?

Code: Select all

siamhie@mxflux23:~
$ systemctl status
● mxflux23
    State: degraded
    Units: 399 loaded (incl. loaded aliases)
     Jobs: 0 queued
   Failed: 1 units
    Since: Tue 2023-05-30 05:09:26 PDT; 7h ago
  systemd: 1:252.6-1mx23+1
  Tainted: local-hwclock
   CGroup: /
           ├─init.scope
           │ └─1 /lib/systemd/systemd
           ├─system.slice
           │ ├─ModemManager.service
           │ │ └─1115 /usr/sbin/ModemManager
           │ ├─accounts-daemon.service
           │ │ └─1064 /usr/libexec/accounts-daemon
           │ ├─acpi-fakekey.service
           │ │ └─1065 /usr/sbin/acpi_fakekeyd -f
           │ ├─acpid.service
           │ │ └─1066 /usr/sbin/acpid
           │ ├─avahi-daemon.service
           │ │ ├─1070 "avahi-daemon: running [mxflux23.local]"
           │ │ └─1074 "avahi-daemon: chroot helper"
           │ ├─bluetooth.service
           │ │ └─1072 /usr/libexec/bluetooth/bluetoothd
           │ ├─cron.service
           │ │ └─1073 /usr/sbin/cron -f
           │ ├─cups-browsed.service
           │ │ └─1400 /usr/sbin/cups-browsed
           │ ├─dbus.service
           │ │ ├─1075 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
           │ │ └─2180 /usr/libexec/corectrl/corectrl_helper
           │ ├─emby-server.service
           │ │ └─1401 /opt/emby-server/system/EmbyServer -programdata /var/lib/emby -ffdetect /opt/emby-server/bin/ffdetect -ffmpeg /opt/emby-se>
           │ ├─haveged.service
           │ │ └─1042 /usr/sbin/haveged --Foreground --verbose=1
           │ ├─lightdm.service
           │ │ ├─1414 /usr/sbin/lightdm
           │ │ └─1437 /usr/lib/xorg/Xorg -dpi "\$DPI" :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
           │ ├─network-manager.service
           │ │ └─1176 /usr/sbin/NetworkManager
           │ ├─nfs-blkmap.service
           │ │ └─1060 /usr/sbin/blkmapd
           │ ├─nfs-idmapd.service
           │ │ └─1062 /usr/sbin/rpc.idmapd
           │ ├─nfs-mountd.service
           │ │ └─1411 /usr/sbin/rpc.mountd
           │ ├─nfsdcld.service
           │ │ └─1063 /usr/sbin/nfsdcld
           │ ├─ntpsec.service
           │ │ └─2007 /usr/sbin/ntpd -p /run/ntpd.pid -c /etc/ntpsec/ntp.conf -g -N -u ntpsec:ntpsec
           │ ├─polkit.service
           │ │ └─1083 /usr/lib/polkit-1/polkitd --no-debug
           │ ├─rpc-statd.service
           │ │ └─1412 /sbin/rpc.statd
           │ ├─rpcbind.service
           │ │ └─1053 /sbin/rpcbind -f -w
           │ ├─rsyslog.service
           │ │ └─1087 /usr/sbin/rsyslogd -n -iNONE
           │ ├─smartmontools.service
           │ │ └─1088 /usr/sbin/smartd -n
           │ ├─system-getty.slice
           │ │ └─getty@tty1.service
           │ │   └─1448 /sbin/agetty -o "-p -- \\u" --noclear - linux
           │ ├─systemd-journald.service
           │ │ └─512 /lib/systemd/systemd-journald
           │ ├─systemd-logind.service
           │ │ └─1090 /lib/systemd/systemd-logind
           │ ├─systemd-udevd.service
           │ │ └─udev
           │ │   └─531 /lib/systemd/systemd-udevd
           │ ├─udisks2.service
           │ │ └─1091 /usr/libexec/udisks2/udisksd
           │ ├─unattended-upgrades.service
           │ │ └─1410 /usr/bin/python3 /usr/share/unattended-upgrades/unattended-upgrade-shutdown --wait-for-signal
           │ └─wpa_supplicant.service
           │   └─1117 /sbin/wpa_supplicant -u -s -O "DIR=/run/wpa_supplicant GROUP=netdev"
           └─user.slice
             └─user-1000.slice
               ├─session-1.scope
               │ ├─1650 lightdm --session-child 13 16
               │ ├─1679 fluxbox
               │ ├─1716 /usr/bin/dbus-launch --exit-with-session --sh-syntax
               │ ├─1717 /usr/bin/dbus-daemon --syslog --fork --print-pid 5 --print-address 7 --session
               │ ├─1770 /usr/bin/ssh-agent /usr/bin/startfluxbox
               │ ├─1789 compton
               │ ├─1796 tint2 -c /home/siamhie/.config/tint2/tint2rc
               │ ├─1797 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
               │ ├─1801 nm-applet
               │ ├─1822 /usr/libexec/gvfsd
               │ ├─1827 /usr/libexec/gvfsd-fuse /run/user/1000/gvfs -f
               │ ├─1996 xfce4-clipman
               │ ├─1997 /usr/libexec/at-spi-bus-launcher --launch-immediately
               │ ├─2004 /usr/bin/dbus-daemon --config-file=/usr/share/defaults/at-spi2/accessibility.conf --nofork --print-address 11 --address=>
               │ ├─2017 /usr/libexec/xdg-desktop-portal
               │ ├─2022 /usr/libexec/xdg-document-portal
               │ ├─2026 /usr/libexec/xdg-permission-store
               │ ├─2032 fusermount3 -o rw,nosuid,nodev,fsname=portal,auto_unmount,subtype=portal -- /run/user/1000/doc
               │ ├─2038 /usr/libexec/xdg-desktop-portal-gtk
               │ ├─2052 /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd
               │ ├─2054 corectrl
               │ ├─2063 /usr/bin/gnome-keyring-daemon --start --foreground --components=secrets
               │ ├─2065 /usr/lib/x86_64-linux-gnu/xfce4/xfconf/xfconfd
               │ ├─2302 /usr/libexec/at-spi2-registryd --use-gnome-session
               │ ├─2363 /usr/bin/python3 /usr/lib/apt-notifier/modules/apt-notifier.py
               │ ├─2477 /bin/bash /tmp/conky-manager2-siamhie/16854737871749932149.sh
               │ ├─2478 conky -c /home/siamhie/.conky/R8/r8
               │ ├─2535 /usr/libexec/gvfsd-metadata
               │ ├─2558 xfce4-terminal
               │ ├─2580 bash
               │ ├─2641 systemctl status
               │ └─2642 pager
               └─user@1000.service
                 ├─app.slice
                 │ └─gnome-keyring-daemon.service
                 │   └─2069 /usr/bin/gnome-keyring-daemon --foreground --components=pkcs11,secrets --control-directory=/run/user/1000/keyring
                 ├─init.scope
                 │ ├─1659 /lib/systemd/systemd --user
                 │ └─1660 "(sd-pam)"
                 └─session.slice
                   ├─pipewire-pulse.service
                   │ └─1677 /usr/bin/pipewire-pulse
                   └─pipewire.service
                     └─1675 /usr/bin/pipewire

[Jerry3904]

I'm still fooling around from time to time with that autohide dock problem, which annoys me. I used dockmaker to match the background and border to the color of the sand on the bottom of the screen. There is still a blue line around the dock itself:

quickshot_230530_151630.png

@Melber is that from you? If yes, I wonder if that might be causing these sporadic problems.