MX-23 alpha2 feedback thread

Forum rules
Locked
Message
Author
User avatar
timkb4cq
Developer
Posts: 3566
Joined: Wed Jul 12, 2006 4:05 pm

Re: MX-23 alpha2 feedback thread

#101 Post by timkb4cq »

I had some no longer repeatable glitches with alpha2.
Booting from the LiveUSB the first three times, when I selected my network access point and entered the password my mouse stopped working as soon as the wifi connected. The touchpad continued to work. Plugging in another mouse (direct wire!) wouldn't work either. That stopped happening when I setup persistence on the flash drive.
Sometimes my amdgpu was correctly detected, sometimes no driver was installed and I had 1024x768 res. Probably specific to this machine and the install doesn't have the problem.
The installer didn't find my ESP partition (I hadn't selected it earlier - probably should have) and left me unable to boot into anything but a flash drive. No boot media detected errors...
Manually mounting the ESP partition and running mx-boot-repair, first repairing grub configuration file then reinstalling grub was successful.
I'm wondering if it would be useful to have a prompt in the grub installation screen when ESP is greyed out that it can be mounted manually to enable it.

Code: Select all

System:
  Kernel: 6.1.0-7-amd64 [6.1.20-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-7-amd64
    root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_alpha2_x64 Libretto April 7  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: Dell product: Inspiron 5575 v: 1.5.0 serial: <superuser required> Chassis:
    type: 10 v: 1.5.0 serial: <superuser required>
  Mobo: Dell model: 05Y1V6 v: A00 serial: <superuser required> UEFI: Dell v: 1.5.0
    date: 01/14/2022
Battery:
  ID-1: BAT1 charge: 25.7 Wh (100.0%) condition: 25.7/42.0 Wh (61.2%) volts: 13.0 min: 11.4
    model: SDI 0x4D,0x38,0x38,0x52,0x00,0x00,0 type: Li-ion serial: <filter> status: full
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Ryzen 7 2700U with Radeon Vega Mobile Gfx bits: 64 type: MT MCP arch: Zen
    level: v3 note: check built: 2017-19 process: GF 14nm family: 0x17 (23) model-id: 0x11 (17)
    stepping: 0 microcode: 0x810100B
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 384 KiB
    desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1545 high: 1662 min/max: 1600/2200 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1662 2: 1626 3: 1342 4: 1600 5: 1452 6: 1600
    7: 1642 8: 1438 bogomips: 35136
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Mobile Series] vendor: Dell driver: N/A
    alternate: amdgpu arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 04:00.0 chip-ID: 1002:15dd class-ID: 0300
  Device-2: Realtek Integrated Webcam type: USB driver: uvcvideo bus-ID: 1-4:2 chip-ID: 0bda:568a
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: vesa
    unloaded: fbdev,modesetting,radeon dri: swrast gpu: N/A display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
  Monitor-1: default res: 1920x1080 hz: 77 size: N/A modes: N/A
  API: OpenGL v: 4.5 Mesa 22.3.6 renderer: llvmpipe (LLVM 15.0.6 256 bits) direct-render: Yes
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Dell driver: snd_hda_intel v: kernel
    pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 04:00.1 chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: Dell driver: snd_hda_intel v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 04:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Sound API: ALSA v: k6.1.0-7-amd64 running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.65 running: yes
Network:
  Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 02:00.0 chip-ID: 10ec:8136 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: Dell
    driver: ath10k_pci v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0
    chip-ID: 168c:0042 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Qualcomm Atheros type: USB driver: btusb v: 0.8 bus-ID: 3-2.4:5 chip-ID: 0cf3:e009
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 25a hci-v: 4.2
  Info: acl-mtu: 1024:8 sco-mtu: 50:8 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 1.38 TiB used: 6.7 GiB (0.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Sabrent model: N/A size: 476.94 GiB block-size:
    physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: ECFM12.3
    temp: 26.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
    rev: SDM3 scheme: GPT
Partition:
  ID-1: / raw-size: 64 GiB size: 62.44 GiB (97.57%) used: 6.7 GiB (10.7%) fs: ext4
    dev: /dev/nvme0n1p5 maj-min: 259:5
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p3
    maj-min: 259:3
Sensors:
  System Temperatures: cpu: 69.9 C mobo: N/A
  Fan Speeds (RPM): fan-1: 2500
Repos:
  Packages: pm: dpkg pkgs: 2019 libs: 1037 tools: apt,apt-get,aptitude,synaptic pm: rpm pkgs: 0
    pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 241 Uptime: 20m wakeups: 8 Memory: 7.4 GiB used: 1.73 GiB (23.4%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: N/A alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.25
Boot Mode: UEFI
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Top
User avatar
dolphin_oracle
Developer
Posts: 22111
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-23 alpha2 feedback thread

#102 Post by dolphin_oracle »

timkb4cq wrote: Mon Apr 10, 2023 3:55 pm I had some no longer repeatable glitches with alpha2.
Booting from the LiveUSB the first three times, when I selected my network access point and entered the password my mouse stopped working as soon as the wifi connected. The touchpad continued to work. Plugging in another mouse (direct wire!) wouldn't work either. That stopped happening when I setup persistence on the flash drive.
Sometimes my amdgpu was correctly detected, sometimes no driver was installed and I had 1024x768 res. Probably specific to this machine and the install doesn't have the problem.
The installer didn't find my ESP partition (I hadn't selected it earlier - probably should have) and left me unable to boot into anything but a flash drive. No boot media detected errors...
Manually mounting the ESP partition and running mx-boot-repair, first repairing grub configuration file then reinstalling grub was successful.
I'm wondering if it would be useful to have a prompt in the grub installation screen when ESP is greyed out that it can be mounted manually to enable it.

Code: Select all

System:
  Kernel: 6.1.0-7-amd64 [6.1.20-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-7-amd64
    root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_alpha2_x64 Libretto April 7  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: Dell product: Inspiron 5575 v: 1.5.0 serial: <superuser required> Chassis:
    type: 10 v: 1.5.0 serial: <superuser required>
  Mobo: Dell model: 05Y1V6 v: A00 serial: <superuser required> UEFI: Dell v: 1.5.0
    date: 01/14/2022
Battery:
  ID-1: BAT1 charge: 25.7 Wh (100.0%) condition: 25.7/42.0 Wh (61.2%) volts: 13.0 min: 11.4
    model: SDI 0x4D,0x38,0x38,0x52,0x00,0x00,0 type: Li-ion serial: <filter> status: full
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Ryzen 7 2700U with Radeon Vega Mobile Gfx bits: 64 type: MT MCP arch: Zen
    level: v3 note: check built: 2017-19 process: GF 14nm family: 0x17 (23) model-id: 0x11 (17)
    stepping: 0 microcode: 0x810100B
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 384 KiB
    desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1545 high: 1662 min/max: 1600/2200 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1662 2: 1626 3: 1342 4: 1600 5: 1452 6: 1600
    7: 1642 8: 1438 bogomips: 35136
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Mobile Series] vendor: Dell driver: N/A
    alternate: amdgpu arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 04:00.0 chip-ID: 1002:15dd class-ID: 0300
  Device-2: Realtek Integrated Webcam type: USB driver: uvcvideo bus-ID: 1-4:2 chip-ID: 0bda:568a
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: vesa
    unloaded: fbdev,modesetting,radeon dri: swrast gpu: N/A display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
  Monitor-1: default res: 1920x1080 hz: 77 size: N/A modes: N/A
  API: OpenGL v: 4.5 Mesa 22.3.6 renderer: llvmpipe (LLVM 15.0.6 256 bits) direct-render: Yes
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Dell driver: snd_hda_intel v: kernel
    pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 04:00.1 chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: Dell driver: snd_hda_intel v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 04:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Sound API: ALSA v: k6.1.0-7-amd64 running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.65 running: yes
Network:
  Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 02:00.0 chip-ID: 10ec:8136 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: Dell
    driver: ath10k_pci v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0
    chip-ID: 168c:0042 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Qualcomm Atheros type: USB driver: btusb v: 0.8 bus-ID: 3-2.4:5 chip-ID: 0cf3:e009
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 25a hci-v: 4.2
  Info: acl-mtu: 1024:8 sco-mtu: 50:8 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 1.38 TiB used: 6.7 GiB (0.5%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Sabrent model: N/A size: 476.94 GiB block-size:
    physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: ECFM12.3
    temp: 26.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
    rev: SDM3 scheme: GPT
Partition:
  ID-1: / raw-size: 64 GiB size: 62.44 GiB (97.57%) used: 6.7 GiB (10.7%) fs: ext4
    dev: /dev/nvme0n1p5 maj-min: 259:5
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p3
    maj-min: 259:3
Sensors:
  System Temperatures: cpu: 69.9 C mobo: N/A
  Fan Speeds (RPM): fan-1: 2500
Repos:
  Packages: pm: dpkg pkgs: 2019 libs: 1037 tools: apt,apt-get,aptitude,synaptic pm: rpm pkgs: 0
    pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 241 Uptime: 20m wakeups: 8 Memory: 7.4 GiB used: 1.73 GiB (23.4%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: N/A alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.25
Boot Mode: UEFI
can you give the QSI from the live-usb boot?
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
timkb4cq
Developer
Posts: 3566
Joined: Wed Jul 12, 2006 4:05 pm

Re: MX-23 alpha2 feedback thread

#103 Post by timkb4cq »

Live Boot (Legacy)

Code: Select all

System:
  Kernel: 6.1.0-7-amd64 [6.1.20-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: quiet splasht nosplash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23_alpha2_x64 Libretto April 7  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: Dell product: Inspiron 5575 v: 1.6.0 serial: <superuser required> Chassis:
    type: 10 v: 1.6.0 serial: <superuser required>
  Mobo: Dell model: 05Y1V6 v: A00 serial: <superuser required> UEFI-[Legacy]: Dell v: 1.6.0
    date: 03/21/2022
Battery:
  ID-1: BAT1 charge: 25.7 Wh (100.0%) condition: 25.7/42.0 Wh (61.2%) volts: 13.0 min: 11.4
    model: SDI 0x4D,0x38,0x38,0x52,0x00,0x00,0 type: Li-ion serial: <filter> status: full
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Ryzen 7 2700U with Radeon Vega Mobile Gfx bits: 64 type: MT MCP arch: Zen
    level: v3 note: check built: 2017-19 process: GF 14nm family: 0x17 (23) model-id: 0x11 (17)
    stepping: 0 microcode: 0x810100B
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 384 KiB
    desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 2143 high: 3435 min/max: 1600/2200 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1377 2: 1358 3: 3402 4: 3435 5: 2539 6: 2077
    7: 1356 8: 1600 bogomips: 35136
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Mobile Series] vendor: Dell driver: N/A
    alternate: amdgpu arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 04:00.0 chip-ID: 1002:15dd class-ID: 0300
  Device-2: Realtek Integrated Webcam type: USB driver: uvcvideo bus-ID: 1-4:2 chip-ID: 0bda:568a
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: vesa
    unloaded: fbdev,modesetting,radeon dri: swrast gpu: N/A display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 143 s-size: 341x191mm (13.43x7.52") s-diag: 391mm (15.39")
  Monitor-1: default res: 1920x1080 size: N/A modes: N/A
  API: OpenGL v: 4.5 Mesa 22.3.6 renderer: llvmpipe (LLVM 15.0.6 256 bits) direct-render: Yes
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Dell driver: snd_hda_intel v: kernel
    pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 04:00.1 chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: Dell driver: snd_hda_intel v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 04:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Sound API: ALSA v: k6.1.0-7-amd64 running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.65 running: yes
Network:
  Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 02:00.0 chip-ID: 10ec:8136 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: Dell
    driver: ath10k_pci v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0
    chip-ID: 168c:0042 class-ID: 0280
  IF: wlan0 state: down mac: <filter>
Bluetooth:
  Device-1: Qualcomm Atheros type: USB driver: btusb v: 0.8 bus-ID: 3-2.4:5 chip-ID: 0cf3:e009
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 25a hci-v: 4.2
  Info: acl-mtu: 1024:8 sco-mtu: 50:8 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 1.4 TiB used: 3.13 GiB (0.2%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Sabrent model: N/A size: 476.94 GiB block-size:
    physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: ECFM12.3
    temp: 26.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
    rev: SDM3 scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: Flash Drive size: 29.88 GiB
    block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 1100 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  Message: No partition data found.
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -2
    file: /live/boot-dev/swap-file
Sensors:
  System Temperatures: cpu: 81.9 C mobo: N/A
  Fan Speeds (RPM): fan-1: 3600
Repos:
  Packages: pm: dpkg pkgs: 2006 libs: 1033 tools: apt,apt-get,aptitude,synaptic pm: rpm pkgs: 0
    pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  No active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
Info:
  Processes: 258 Uptime: 0m wakeups: 4 Memory: 7.4 GiB used: 1.05 GiB (14.2%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: N/A alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.25
Boot Mode: BIOS (legacy, CSM, MBR)
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Top
User avatar
timkb4cq
Developer
Posts: 3566
Joined: Wed Jul 12, 2006 4:05 pm

Re: MX-23 alpha2 feedback thread

#104 Post by timkb4cq »

I found if I disable Legacy ROMS in the UEFI then the amdgpu driver will load. Sheesh!
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Top
User avatar
siamhie
Global Moderator
Posts: 3239
Joined: Fri Aug 20, 2021 5:45 pm

Re: MX-23 alpha2 feedback thread

#105 Post by siamhie »

dolphin_oracle wrote: Mon Apr 10, 2023 1:29 pm The .conf file is part of the package. I guess they made a defaults change. I’m unlikely to change the default but at least we know the why

@dolphin_oracle Thanks for the explanation. I won't worry about it then. I really should be using journalctl instead since I boot using systemd by default.
This is my Fluxbox . There are many others like it, but this one is mine. My Fluxbox is my best friend. It is my life.
I must master it as I must master my life. Without me, my Fluxbox is useless. Without my Fluxbox, I am useless.
Top
User avatar
siamhie
Global Moderator
Posts: 3239
Joined: Fri Aug 20, 2021 5:45 pm

Re: MX-23 alpha2 feedback thread

#106 Post by siamhie »

timkb4cq wrote: Mon Apr 10, 2023 3:30 pm @siamhie Corectrl 1.3.5 is now in the MX-23 main repo.

Thank you so much @timkb4cq for doing that. I'll report back with my results.
This is my Fluxbox . There are many others like it, but this one is mine. My Fluxbox is my best friend. It is my life.
I must master it as I must master my life. Without me, my Fluxbox is useless. Without my Fluxbox, I am useless.
Top
User avatar
dolphin_oracle
Developer
Posts: 22111
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-23 alpha2 feedback thread

#107 Post by dolphin_oracle »

timkb4cq wrote: Mon Apr 10, 2023 4:45 pm I found if I disable Legacy ROMS in the UEFI then the amdgpu driver will load. Sheesh!
Those legacy modes cause trouble! Likely why your esp wasn’t pre selected too.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
Jerry3904
Administrator
Posts: 23107
Joined: Wed Jul 19, 2006 6:13 am

Re: MX-23 alpha2 feedback thread

#108 Post by Jerry3904 »

timkb4cq wrote: Mon Apr 10, 2023 3:28 pm @Jerry3904 Touchpad-indicator is now in the main MX-23 repo.
It isn't being maintained anymore. I had to patch it to use AtayanaAppIndicator instead of AppIndicator which isn't in bookworm.
The manual portion of it works fine. The automatic disable touchpad when mouse is plugged in and disable touchpad when typing options do not.
There's obviously been some change in mouse/touchpad handling since bullseye.
I installed it on my Live (Acer Aspire One) system, where I was having trouble with the cursor jumping around when typing, and switched drivers. Now, rather than use the Xfce tool to just turn it off, I can select to "disable while typing" which seems to work pretty well. That's a significant improvement so worth the trouble. Thanks again.
Production: 5.10, MX-23 Xfce, AMD FX-4130 Quad-Core, GeForce GT 630/PCIe/SSE2, 16 GB, SSD 120 GB, Data 1TB
Personal: Lenovo X1 Carbon with MX-23 Fluxbox
Other: Raspberry Pi 5 with MX-23 Xfce Raspberry Pi Respin
Top
User avatar
siamhie
Global Moderator
Posts: 3239
Joined: Fri Aug 20, 2021 5:45 pm

Re: MX-23 alpha2 feedback thread

#109 Post by siamhie »

@timkb4cq I'm back with great results. The build worked flawlessly. My GPU now runs at an average of 37.0°C idle (edge) as opposed to the 61.0°C without corectrl.
*note that version >= 0.106 was used as the guide due to Polkit version 122 in Bookworm. (https://gitlab.com/corectrl/corectrl/-/wikis/Setup)


Without corectrl

Code: Select all

╔═[siamhie@mx23-alpha]═[15:27 10 04 23]══════════════════════════════════════════════════════════[~]
╚═> sensors

amdgpu-pci-0b00
Adapter: PCI adapter
vddgfx:        6.00 mV 
fan1:           0 RPM  (min =    0 RPM, max = 3600 RPM)
edge:         +61.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
junction:     +63.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
mem:          +64.0°C  (crit = +105.0°C, hyst = -273.1°C)
                       (emerg = +110.0°C)
PPT:          33.00 W  (cap = 186.00 W)

With corectrl

Code: Select all

╔═[siamhie@mx23-alpha]═[15:39 10 04 23]══════════════════════════════════════════════════════════[~]
╚═> sensors

amdgpu-pci-0b00
Adapter: PCI adapter
vddgfx:        6.00 mV 
fan1:         966 RPM  (min =    0 RPM, max = 3600 RPM)
edge:         +37.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
junction:     +39.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
mem:          +42.0°C  (crit = +105.0°C, hyst = -273.1°C)
                       (emerg = +110.0°C)
PPT:          32.00 W  (cap = 186.00 W)
This is my Fluxbox . There are many others like it, but this one is mine. My Fluxbox is my best friend. It is my life.
I must master it as I must master my life. Without me, my Fluxbox is useless. Without my Fluxbox, I am useless.
Top
User avatar
bin
Posts: 68
Joined: Sun Aug 30, 2009 1:53 am

Re: MX-23 alpha2 feedback thread

#110 Post by bin »

Notifications are HUMONGOUS, at least 3 x the size of those in 21.3!!
Top
Locked

Return to “General”