I comandi che uso per l'installazione sono questi:
sudo sh /home/nome_utente/Scaricati/uld/install-scanner.sh
sudo sh /home/nome_utente/Scaricati/uld/install-printer.sh
Code: Select all
System: Kernel: 5.10.0-21-amd64 [5.10.162-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-21-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower January 15 2023
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: M4N78 SE v: Rev X.0x serial: <filter>
BIOS: American Megatrends v: 1501 date: 10/09/2012
CPU: Info: Dual Core model: AMD Athlon 64 X2 4800+ bits: 64 type: MCP arch: K8 rev.F+
family: F (15) model-id: 6B (107) stepping: 2 microcode: 83 cache: L2: 1024 KiB
flags: lm nx pae sse sse2 sse3 svm bogomips: 10049
Speed: 1000 MHz min/max: 1000/2500 MHz Core speeds (MHz): 1: 1000 2: 1000
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass status: Not affected
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA G86 [GeForce 8400 GS] driver: nvidia v: 340.108 bus-ID: 02:00.0
chip-ID: 10de:0422 class-ID: 0300
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver: loaded: nvidia
unloaded: fbdev,modesetting,nouveau,vesa alternate: nv display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 445x278mm (17.5x10.9")
s-diag: 525mm (20.7")
Monitor-1: HDMI-0 res: 1680x1050 hz: 60 dpi: 89 size: 480x270mm (18.9x10.6")
diag: 551mm (21.7")
OpenGL: renderer: GeForce 8400 GS/PCIe/SSE2 v: 3.3.0 NVIDIA 340.108 direct render: Yes
Audio: Device-1: NVIDIA MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 00:07.0 chip-ID: 10de:0774 class-ID: 0403
Device-2: C-Media CMI8738/CMI8768 PCI Audio driver: snd_cmipci v: kernel
bus-ID: 01:07.0 chip-ID: 13f6:0111 class-ID: 0401
Sound Server-1: ALSA v: k5.10.0-21-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: NVIDIA MCP77 Ethernet vendor: ASUSTeK driver: forcedeth v: kernel port: b880
bus-ID: 00:0a.0 chip-ID: 10de:0760 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth: Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb
v: 0.8 bus-ID: 7-2:2 chip-ID: 0a12:0001 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 1.1 lmp-v: 1.1
sub-v: 33c hci-v: 1.1 rev: 33c
Info: acl-mtu: 192:8 sco-mtu: 64:8 link-mode: slave accept
service-classes: rendering, capturing, object transfer, audio
Drives: Local Storage: total: 465.76 GiB used: 8.48 GiB (1.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HTS547550A9E384 size: 465.76 GiB
block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400
serial: <filter> rev: A60A scheme: MBR
Partition: ID-1: / raw-size: 457.75 GiB size: 449.5 GiB (98.20%) used: 8.48 GiB (1.9%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
maj-min: 8:2
Sensors: System Temperatures: cpu: 36.0 C mobo: 30.0 C
Fan Speeds (RPM): cpu: 3214 case-1: 0
Power: 12v: 12.15 5v: N/A 3.3v: 3.23 vbat: N/A
Repos: Packages: note: see --pkg apt: 2039 lib: 1030 flatpak: 0
Active apt repos in: /etc/apt/sources.list
1: deb https://www.bchemnet.com/suldr/ debian extra
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://it.mxrepo.com/mx/repo/ bullseye main non-free
Info: Processes: 199 Uptime: 1h 1m wakeups: 1 Memory: 7.77 GiB used: 1.29 GiB (16.5%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: BIOS (legacy, CSM, MBR)
