on the previous kernel I had GPU recognized and configured to be used instead of using the onboard iGPU
so now every program I had to run using optirun now stalls. So I suspect since the kernel update the system is sort of returned to stock install, my question then is do I have to re-install all the video drivers even though they are installed? Or hopefully there is a quicker way to re-enable the nvidia video. Also now getting error in conky about nvidia-smi failed.
Code: Select all
Snapshot created on: 20220407_1725
System: Kernel: 6.0.0-6mx-amd64 [6.0.12-1~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: root=UUID=<filter> ro quiet splash
init=/lib/systemd/systemd initrd=boot\initrd.img-6.0.0-6mx-amd64
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.2.1_ahs_x64 Wildflower November 22 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: ASUSTeK product: ROG Strix G513QC_G513QC v: 1.0 serial: <filter>
Mobo: ASUSTeK model: G513QC v: 1.0 serial: <filter> UEFI: American Megatrends LLC.
v: G513QC.313 date: 03/29/2022
Battery: ID-1: BAT0 charge: 50.0 Wh (100.0%) condition: 50.0/56.0 Wh (89.2%) volts: 17.2
min: 15.9 model: AS3GWZC3KC G513-36 type: Li-ion serial: <filter> status: Full
CPU: Info: 8-Core model: AMD Ryzen 9 5900HX with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 family: 19 (25) model-id: 50 (80) stepping: 0 microcode: A50000C cache:
L2: 4 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 105406
Speed: 3944 MHz min/max: 400/4890 MHz boost: enabled Core speeds (MHz): 1: 3944 2: 2081
3: 699 4: 445 5: 2586 6: 400 7: 769 8: 400 9: 445 10: 400 11: 1665 12: 690 13: 683
14: 580 15: 713 16: 897
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: always-on,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA GA107M [GeForce RTX 3050 Mobile] vendor: ASUSTeK driver: N/A
alternate: nvidia bus-ID: 01:00.0 chip-ID: 10de:25a2 class-ID: 0300
Device-2: AMD Cezanne vendor: ASUSTeK driver: amdgpu v: kernel bus-ID: 06:00.0
chip-ID: 1002:1638 class-ID: 0300
Display: x11 server: X.Org 1.20.14 compositor: compton v: 1 driver: loaded: amdgpu,ati
unloaded: fbdev,modesetting,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP res: 1920x1080 hz: 144 dpi: 142 size: 344x194mm (13.5x7.6")
diag: 395mm (15.5")
OpenGL: renderer: AMD RENOIR (LLVM 14.0.5 DRM 3.48 6.0.0-6mx-amd64) v: 4.6 Mesa 22.0.5
direct render: Yes
Audio: Device-1: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 01:00.1
chip-ID: 10de:2291 class-ID: 0403
Device-2: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus-ID: 06:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-3: AMD ACP/ACP3X/ACP6x Audio Coprocessor
vendor: ASUSTeK Raven/Raven2/FireFlight/Renoir Processor driver: N/A
alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x
bus-ID: 06:00.5 chip-ID: 1022:15e2 class-ID: 0480
Device-4: AMD Family 17h/19h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403
Sound Server-1: ALSA v: k6.0.0-6mx-amd64 running: yes
Sound Server-2: PulseAudio v: 15.0 running: yes
Sound Server-3: PipeWire v: 0.3.58 running: yes
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK
driver: r8169 v: kernel port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter
vendor: AzureWave driver: mt7921e v: kernel port: e000 bus-ID: 03:00.0
chip-ID: 14c3:7961 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth: Device-1: IMC Networks Wireless_Device type: USB driver: btusb v: 0.8 bus-ID: 3-4:3
chip-ID: 13d3:3563 class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block:
hardware: no software: yes address: <filter>
Info: acl-mtu: 1021:6 sco-mtu: 240:8 link-policy: rswitch sniff link-mode: slave accept
Drives: Local Storage: total: 1.45 TiB used: 261.47 GiB (17.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:7 vendor: Western Digital
model: PC SN530 SDBPNPZ-1T00-1032 size: 953.87 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: 21111000
temp: 38.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Intel model: SSDPEKNU512GZ size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 002C temp: 35.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 type: USB vendor: Kingston model: DataTraveler 70
size: 28.82 GiB block-size: physical: 512 B logical: 512 B type: N/A serial: <filter>
scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-4: /dev/sdb maj-min: 8:16 type: USB vendor: Lexar model: USB Flash Drive
size: 29.82 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter>
rev: 1100 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw-size: 945.61 GiB size: 929.7 GiB (98.32%) used: 240.79 GiB (25.9%) fs: ext4
dev: /dev/nvme0n1p2 maj-min: 259:9
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 3.6 MiB (1.4%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:8
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 4.8 MiB (0.1%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:10
Sensors: System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 48.0 C
Fan Speeds (RPM): cpu: 1900
Repos: Packages: 4022 note: see --pkg apt: 4009 lib: 2057 flatpak: 13
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/apt-build.list
1: deb [trusted=yes] file: /var/cache/apt-build/repository/ apt-build main
Active apt repos in: /etc/apt/sources.list.d/atom.list
1: deb [arch=amd64] https://packagecloud.io/AtomEditor/atom/any/ any main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/microsoft-prod.list
1: deb [arch=amd64,arm64,armhf] https://packages.microsoft.com/debian/11/prod/ bullseye main
Active apt repos in: /etc/apt/sources.list.d/mono-official-vs.list
1: deb https://download.mono-project.com/repo/debian/ vs-buster main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
2: deb http://mxrepo.com/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/vscode.list
1: deb [arch=amd64] https://packages.microsoft.com/repos/vscode/ stable main
Info: Processes: 372 Uptime: 4h 15m wakeups: 5 Memory: 15.04 GiB used: 3.55 GiB (23.6%)
Init: systemd v: 247 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI
