Is there some permission I have to change to get it to go into suspend?Authentication is required to suspend the system
An application is attempting to perform an action that requires privileges. Authentication as the super user is required to perform this action.
quick-system-info-mx:
Code: Select all
System: Kernel: 5.10.0-18-amd64 [5.10.140-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-18-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.2.1_x64 Wildflower April 9 2022
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: LENOVO product: 20JNS3N700 v: ThinkPad T470 W10DG serial: <filter>
Chassis: type: 10 serial: <filter>
Mobo: LENOVO model: 20JNS3N700 v: SDK0J40697 WIN serial: <filter> UEFI-[Legacy]: LENOVO
v: N1QET79W (1.54 ) date: 11/16/2018
Battery: ID-1: BAT0 charge: 18.8 Wh (100.0%) condition: 18.8/24.0 Wh (78.3%) volts: 12.7 min: 11.5
model: SMP 01AV421 type: Li-poly serial: <filter> status: Full cycles: 972
ID-2: BAT1 charge: 18.2 Wh (95.8%) condition: 19.0/24.1 Wh (79.2%) volts: 12.6 min: 11.4
model: Celxpert 01AV424 type: Li-poly serial: <filter> status: Not charging cycles: 714
CPU: Info: Dual Core model: Intel Core i5-6300U bits: 64 type: MT MCP arch: Skylake family: 6
model-id: 4E (78) stepping: 3 microcode: F0 cache: L2: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 19999
Speed: 500 MHz min/max: 400/3000 MHz Core speeds (MHz): 1: 500 2: 500 3: 500 4: 500
Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: Clear CPU buffers; SMT vulnerable
Graphics: Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Lenovo driver: i915 v: kernel
bus-ID: 00:02.0 chip-ID: 8086:1916 class-ID: 0300
Device-2: Acer Integrated Camera type: USB driver: uvcvideo bus-ID: 1-8:4
chip-ID: 5986:111c class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver: loaded: modesetting
unloaded: fbdev,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9")
Monitor-1: eDP-1 res: 1920x1080 hz: 60 dpi: 158 size: 309x174mm (12.2x6.9")
diag: 355mm (14")
OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 20.3.5
direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel
alternate: snd_soc_skl bus-ID: 00:1f.3 chip-ID: 8086:9d70 class-ID: 0403
Sound Server-1: ALSA v: k5.10.0-18-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Intel Ethernet I219-LM vendor: Lenovo driver: e1000e v: kernel port: efa0
bus-ID: 00:1f.6 chip-ID: 8086:156f class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel modules: wl port: efa0
bus-ID: 04:00.0 chip-ID: 8086:24f3 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-7:3
chip-ID: 8087:0a2b class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 14 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 100 hci-v: 4.2 rev: 100
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: slave accept
service-classes: rendering, capturing, object transfer, audio
Drives: Local Storage: total: 238.47 GiB used: 10.02 GiB (4.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Lenovo model: LENSE20256GMSP34MEAT2TA
size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4
type: SSD serial: <filter> rev: 2.8.8341 temp: 33.9 C scheme: MBR
Partition: ID-1: / raw-size: 53.71 GiB size: 52.57 GiB (97.87%) used: 7.84 GiB (14.9%) fs: ext4
dev: /dev/nvme0n1p1 maj-min: 259:1
ID-2: /home raw-size: 97.66 GiB size: 95.56 GiB (97.86%) used: 2.16 GiB (2.3%) fs: ext4
dev: /dev/nvme0n1p2 maj-min: 259:2
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 32 MiB used: 27.1 MiB (84.7%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:3
Sensors: System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): cpu: 0
Repos: Packages: note: see --pkg apt: 2084 lib: 1042 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
Active apt repos in: /etc/apt/sources.list.d/skype-stable.list
1: deb [arch=amd64] https://repo.skype.com/deb stable main
Info: Processes: 285 Uptime: 13d 3h 29m wakeups: 22 Memory: 15.29 GiB used: 10.57 GiB (69.1%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Shell: Bash v: 5.1.4 running-in: quick-system-info-mx
inxi: 3.3.06
Boot Mode: BIOS (legacy, CSM, MBR)
