Tuner up to Main

[Jerry3904]

Check user reactions in this thread: https://forum.mxlinux.org/viewtopic.php ... 79#p690479

I wish we could fork it and solve that systray problem, not sure who around here knows Vala.

[Jerry3904]

We might want to compile 1.51 sometime as it supposedly takes care of the pause button problem.

[Stevo]

I've built 1.5.1 for MX 21 and 19 test repos, sending it up to Tim soon.

Edit: Here it is. The MX 19 versions require a libgranite 5.5.0 that's in the test repos, MX 21 is just plain vanilla Bullseye-built.

https://drive.google.com/file/d/1ziNclh ... sp=sharing

The issue with the zombie player running after closing still persists. I bet that if you pause before closing, the zombie is still there, just quietly standing in the shadowed background.

[Jerry3904]

Awesome, Stevo! Thanks.

[pianokeyjoe]

Code: Select all

tuner:
 Depends: libgeoclue-2-0 but it is not going to be installed
 Depends: libgeocode-glib0 but it is not going to be installed
 Depends: libgranite5 but it is not going to be installed
  Depends: libgstreamer-plugins-bad1.0-0 (<1.15) but 1:1.14.4-dmo7 is to be installed

on:

Code: Select all

System:    Kernel: 5.10.0-8mx-rt-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/vmlinuz-5.10.0-8mx-rt-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm 4.14.0 vt: 7 
           dm: LightDM 1.26.0 Distro: MX-19.4_x64 patito feo October 21  2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Laptop System: Hewlett-Packard product: HP Pavilion g6 Notebook PC 
           v: 0594100000204610000620100 serial: <filter> Chassis: type: 10 serial: <filter> 
           Mobo: Hewlett-Packard model: 1693 v: KBC Version 14.16 serial: <filter> 
           BIOS: Hewlett-Packard v: F.37 date: 01/16/2013 
CPU:       Info: Dual Core model: Intel Core i3 M 380 bits: 64 type: MT MCP arch: Nehalem 
           family: 6 model-id: 25 (37) stepping: 5 microcode: 7 cache: L2: 3 MiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 20213 
           Speed: 1210 MHz min/max: 933/2533 MHz Core speeds (MHz): 1: 1210 2: 994 3: 1087 
           4: 1124 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds 
           status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel Core Processor Integrated Graphics vendor: Hewlett-Packard 
           driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:0046 class-ID: 0300 
           Device-2: Microdia type: USB driver: uvcvideo bus-ID: 2-1.6:4 chip-ID: 0c45:6321 
           class-ID: 0e02 
           Display: x11 server: X.Org 1.20.10 compositor: xfwm4 v: 4.14.0 driver: loaded: intel 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0") 
           s-diag: 414mm (16.3") 
           Monitor-1: LVDS1 res: 1366x768 hz: 60 dpi: 101 size: 344x193mm (13.5x7.6") 
           diag: 394mm (15.5") 
           OpenGL: renderer: Mesa DRI Intel HD Graphics (ILK) v: 2.1 Mesa 20.3.4 
           direct render: Yes 
Audio:     Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Hewlett-Packard 
           driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403 
           Sound Server-1: ALSA v: k5.10.0-8mx-rt-amd64 running: yes 
           Sound Server-2: JACK v: 1.9.12 running: no 
           Sound Server-3: PulseAudio v: 12.2 running: yes 
Network:   Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Hewlett-Packard 
           driver: r8169 v: kernel port: 3000 bus-ID: 01:00.0 chip-ID: 10ec:8136 class-ID: 0200 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
           Device-2: Qualcomm Atheros AR9285 Wireless Network Adapter 
           vendor: Hewlett-Packard U98Z062.12 802.11bgn driver: ath9k v: kernel port: 3000 
           bus-ID: 02:00.0 chip-ID: 168c:002b class-ID: 0280 
           IF: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 465.76 GiB used: 185.11 GiB (39.7%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST500LM034-2GH17A size: 465.76 GiB 
           block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 
           serial: <filter> rev: LXM3 scheme: MBR 
Partition: ID-1: / raw-size: 29.3 GiB size: 28.71 GiB (98.00%) used: 11.75 GiB (40.9%) fs: ext4 
           dev: /dev/sda3 maj-min: 8:3 
           ID-2: /boot raw-size: 512 MiB size: 487.9 MiB (95.30%) used: 107.5 MiB (22.0%) 
           fs: ext4 dev: /dev/sda1 maj-min: 8:1 
           ID-3: /home raw-size: 428.15 GiB size: 420.43 GiB (98.20%) used: 173.26 GiB (41.2%) 
           fs: ext4 dev: /dev/sda4 maj-min: 8:4 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 7.81 GiB used: 0 KiB (0.0%) priority: -2 
           dev: /dev/sda2 maj-min: 8:2 
Sensors:   System Temperatures: cpu: 72.0 C mobo: 0.0 C 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2927 lib: 1391 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://la.mxrepo.com/mx/repo/ buster main non-free
           2: deb http://la.mxrepo.com/mx/testrepo/ buster test
           3: deb http://la.mxrepo.com/mx/repo/ buster ahs
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 245 Uptime: 11h 42m wakeups: 2 Memory: 7.58 GiB used: 2.37 GiB (31.3%) 
           Init: SysVinit v: 2.93 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 8.3.0 
           alt: 8 Shell: quick-system-in default: Bash v: 5.0.3 running-in: quick-system-in 
           inxi: 3.3.06 

Was not installable from testing nor now from Main. I downloaded the files from @Stevo just in case a fix for MX19.4 AHS 64bit is found.

[timkb4cq]

This

Code: Select all

Depends: libgstreamer-plugins-bad1.0-0 (<1.15) but 1:1.14.4-dmo7 is to be installed

suggests you have installed gstreamer from the deb-multimedia repos but not the libgstreamer-plugins-bad1.0-0 package. Dmo packages often create this sort of dependency issue which is why we don't recommend them or include that repo in our lists.

I just successfully installed Tuner from the Test repo using MXPI in my MX19 install. I can't reproduce the aforementioned zombie issue with it. I'll have to see what is different in MX21...

[Jerry3904]

I'm seeing a failure (on MX-Fluxbox) for the icon to be picked up for the taskbar. There is an application file:

/usr/share/applications/com.github.louis77.tuner.desktop

and it points to this icon:

Icon=com.github.louis77.tuner

Synaptic indicates that the icons are installed by size in hicolor/, for instance here:

/usr/share/icons/hicolor/48x48/apps/com.github.louis77.tuner.svg

But it's not getting picked up on my system, at least. I wonder if we might want to fork it...

[Jerry3904]

OK, now on production machine with Xfce: icon shows in normal manner.

[dolphin_oracle]

Can the tint2 panel show svg icons? I assume so but I don’t remember

[Jerry3904]

Pretty sure, but will check--thanks.