Docker install broken something

[jimbob1]

Hi everyone, docker again. tried install and i seem to have messed up again. restarted and I get a blank screen after login with a cursor
but system in not loading, anyone able to help please??

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-9-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_x64 Wildflower October 20  2021 base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Server System: Dell product: PowerEdge T320 v: N/A serial: <filter> Chassis: 
           type: 17 serial: <filter> 
           Mobo: Dell model: 0W7H8C v: A01 serial: <filter> UEFI: Dell v: 1.4.6 date: 10/26/2012 
CPU:       Topology: Quad Core model: Intel Xeon E5-1410 0 bits: 64 type: MT MCP 
           arch: Sandy Bridge family: 6 model-id: 2D (45) stepping: 7 microcode: 71A 
           L2 cache: 10.0 MiB 
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 44799 
           Speed: 2187 MHz min/max: 1200/3200 MHz Core speeds (MHz): 1: 1927 2: 1843 3: 1828 
           4: 1886 5: 1644 6: 1895 7: 1904 8: 1756 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds 
           status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Matrox Systems G200eR2 vendor: Dell driver: mgag200 v: kernel 
           bus ID: 06:00.0 chip ID: 102b:0534 
           Display: x11 server: X.Org 1.20.11 driver: mga,modesetting unloaded: fbdev,vesa 
           resolution: 1280x960~60Hz 
           OpenGL: renderer: llvmpipe (LLVM 11.0.1 256 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 
           direct render: Yes 
Audio:     Message: No Device data found. 
Network:   Device-1: Broadcom and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe 
           vendor: Dell driver: tg3 v: kernel port: dcc0 bus ID: 01:00.0 chip ID: 14e4:165f 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           Device-2: Broadcom and subsidiaries NetXtreme BCM5720 2-port Gigabit Ethernet PCIe 
           vendor: Dell driver: tg3 v: kernel port: dcc0 bus ID: 01:00.1 chip ID: 14e4:165f 
           IF: eth1 state: down mac: <filter> 
Drives:    Local Storage: total: 40.96 TiB used: 76.81 GiB (0.2%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: Ultra size: 28.64 GiB block size: 
           physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR 
           ID-2: /dev/sdb vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-3: /dev/sdc vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-4: /dev/sdd vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-5: /dev/sde vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-6: /dev/sdf vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-7: /dev/sdg vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-8: /dev/sdh vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-9: /dev/sdi vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-10: /dev/sdj vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-11: /dev/sdk vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-12: /dev/sdl vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-13: /dev/sdm vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-14: /dev/sdn vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-15: /dev/sdo vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-16: /dev/sdp vendor: Seagate model: ST3000NXCLAR3000 size: 2.73 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS1F 
           ID-17: /dev/sdq vendor: Western Digital model: WD5003ABYX-18WERA0 size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B rotation: 7200 rpm serial: <filter> 
           rev: 1S03 scheme: GPT 
           ID-18: /dev/sdr vendor: Seagate model: ST4000NM0023 size: 3.64 TiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: GS0A scheme: GPT 
           ID-19: /dev/sds vendor: Western Digital model: WD5003ABYX-18WERA0 size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B rotation: 7200 rpm serial: <filter> 
           rev: 1S03 scheme: MBR 
           ID-20: /dev/sdt model: MG07SCA12TEY size: 10.91 TiB block size: physical: 4096 B 
           logical: 512 B serial: N/A rev: EI07 scheme: GPT 
           ID-21: /dev/sdu model: MG07SCA12TEY size: 10.91 TiB block size: physical: 4096 B 
           logical: 512 B serial: N/A rev: EI0B 
           ID-22: /dev/sdv vendor: Seagate model: ST1000NM0001 size: 931.51 GiB block size: 
           physical: 512 B logical: 512 B serial: N/A rev: PS06 scheme: GPT 
Partition: ID-1: / raw size: N/A size: 12.36 GiB used: 394.9 MiB (3.1%) fs: overlay 
           source: ERR-102 
Sensors:   System Temperatures: cpu: 58.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
Info:      Processes: 245 Uptime: 8m Memory: 15.57 GiB used: 1.33 GiB (8.6%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36 

my hd

Code: Select all

demo@mx1:/media/demo/rootMX21
$ ls -la
total 92
drwxr-xr-x   19 root root  4096 Mar 26 08:25 .
drwxr-x---+   3 root root    60 Apr  4 19:50 ..
lrwxrwxrwx    1 root root     7 Oct 19 21:11 bin -> usr/bin
drwxr-xr-x    5 root root  4096 Mar 26 08:34 boot
drwx------    2 root root  4096 Mar 17 11:49 .cache
drwxr-xr-x    2 root root  4096 Mar 17 11:44 dev
drwxr-xr-x  157 root root 12288 Apr  4 19:40 etc
drwxr-xr-x    3 root root  4096 Mar 17 11:44 home
lrwxrwxrwx    1 root root    31 Mar 26 08:25 initrd.img -> boot/initrd.img-5.10.0-13-amd64
lrwxrwxrwx    1 root root    31 Mar 26 08:25 initrd.img.old -> boot/initrd.img-5.10.0-12-amd64
lrwxrwxrwx    1 root root     7 Oct 19 21:11 lib -> usr/lib
lrwxrwxrwx    1 root root     9 Oct 19 21:11 lib64 -> usr/lib64
lrwxrwxrwx    1 root root    10 Oct 19 21:11 libx32 -> usr/libx32
drwx------    2 root root 16384 Mar 17 11:42 lost+found
drwxr-xr-x    4 root root  4096 Apr  2 10:37 media
drwxr-xr-x   18 root root  4096 Mar 19 15:57 mnt
drwxr-xr-x    4 root root  4096 Apr  4 16:55 opt
drwxr-xr-x    2 root root  4096 Mar 17 11:42 proc
drwx------    9 root root  4096 Apr  4 18:27 root
drwxr-xr-x    2 root root  4096 Mar 17 11:42 run
lrwxrwxrwx    1 root root     8 Oct 19 21:11 sbin -> usr/sbin
drwxr-xr-x    2 root root  4096 Mar 19 15:23 srv
drwxr-xr-x    2 root root  4096 Mar 17 11:42 sys
drwxrwxrwt    4 root root  4096 Apr  4 19:44 tmp
drwxr-xr-x   14 root root  4096 Oct 19 18:17 usr
drwxr-xr-x   12 root root  4096 Oct 19 21:16 var
lrwxrwxrwx    1 root root    28 Mar 26 08:25 vmlinuz -> boot/vmlinuz-5.10.0-13-amd64
lrwxrwxrwx    1 root root    28 Mar 26 08:25 vmlinuz.old -> boot/vmlinuz-5.10.0-12-amd64
demo@mx1:/media/demo/rootMX21

[jimbob1]

tried this fix via liveusb as I thought that what the issue is viewtopic.php?t=68771

[jimbob1]

screenshot of my home directory

Code: Select all

-rw-r--r--  1  911  911  262084 Dec 21 11:40 mergerfs_2.33.3.debian-bullseye_amd64.deb
drwxr-xr-x  4 root root    4096 Apr  4 17:44 migration
drwx------  5  911  911    4096 Mar 24 13:51 .mozilla
drwxr-xr-x  3  911  911    4096 Apr  4 11:30 Music
drwxr-xr-x  4  911  911    4096 Mar 17 12:18 .npm
drwxr-xr-x  2  911  911    4096 Mar 17 11:49 Pictures
drwx------  3  911  911    4096 Mar 17 12:27 .pki
-rw-r--r--  1  911  911     807 Aug  4  2021 .profile

result is chown: invalid user: ‘jim:jim’

[Huckleberry Finn]

...result is chown: invalid user: ‘jim:jim’

Very normal, as there's no user as jim on live session.

( The other one was on your installed system on /dev/sdb1 and your username was jim )

[Huckleberry Finn]

You can do this: Assuming it's still jim on the installed system:

On login screen press Ctrl+Alt+F1

Login manually as root (type root as the username, hit Enter) , then type pw. for root (blindly) and hit Enter.

Then apply that command:

Code: Select all

sudo chown -R jim:jim /home/jim/

then

Code: Select all

sudo reboot

or

Code: Select all

sudo init 6

or just Ctrl+Alt+F7

[jimbob1]

thanks for getting back Huckleberry Finn, i cannot login as root - not accepting my password

am i out of luck and have to reinstall??

[Huckleberry Finn]

On live session : Menu => "Chroot Rescue Scan" .. proceed. It'll find your installed MX, press Enter..

Once the prompt shows

chroot>

apply that command ( sudo chown -R jim:jim /home/jim/ )
_______________________

While you're at it: you can issue:

Code: Select all

mx-user

and change all root , user etc. passwords as you like :)

[jimbob1]

you mean via live usb session?? once its booted via liveusb
im being dim

[jimbob1]

or via grub menu before booting??

[Huckleberry Finn]

you mean via live usb session?? once its booted via liveusb

Yep :)

(Actually, any live session: Usb / DVD (whatever) or even fromiso (when there's such a Grub entry) )

Shortly: Just boot your usb, then start Menu => "Chroot Rescue Scan"