Some time ago I started to use MX Linux, and, of course, facing some problems as far as my requirements for the system is quite specific.
But most of the problems I have solved for now, except a couple of them. And the main thing that annoying me in user experience is that every time I boot the system one weird thing is happening.
If my init is SysV with every of few installations attempts I've made for my laptop behaving this way. I have no password on logon, that's why after I see login screen animation I see desktop environment. But in about 5 seconds after I see black sreen with the blinking underscore and then login animation again.
So, this happens with every reboot, and quite annoying. I've made some reasearch on the web few times, but couldn't find anyone with the same problems.
Please, help me to figure out what is happening and how to fix it.
Thanks in advance!
* * *
Quick System Info:
Code: Select all
Snapshot created on: 20220310_2113
System: Kernel: 5.10.0-13-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/vmlinuz-5.10.0-13-amd64 root=UUID=<filter> ro
rootflags=subvol=@ quiet splash
Desktop: KDE Plasma 5.20.5 info: latte-dock wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-21_KDE_x64 Wildflower October 20 2021 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: ASUSTeK product: UX331UA v: 1.0 serial: <filter>
Mobo: ASUSTeK model: UX331UA v: 1.0 serial: <filter> UEFI: American Megatrends v: UX331UA.309 date: 04/17/2019
Battery: ID-1: BAT0 charge: N/A condition: N/A volts: N/A model: N/A type: Unknown serial: N/A status: Unknown
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter> charge: 55% (should be ignored)
rechargeable: yes status: Discharging
CPU: Info: Quad Core model: Intel Core i5-8250U bits: 64 type: MT MCP arch: Kaby Lake note: check family: 6
model-id: 8E (142) stepping: A (10) microcode: EC cache: L2: 6 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800
Speed: 876 MHz min/max: 400/3400 MHz Core speeds (MHz): 1: 876 2: 910 3: 907 4: 926 5: 700 6: 700 7: 700 8: 700
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel UHD Graphics 620 vendor: ASUSTeK driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:5917
class-ID: 0300
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: loaded: modesetting unloaded: fbdev,vesa
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9")
Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 102 size: 477x268mm (18.8x10.6") diag: 547mm (21.5")
OpenGL: renderer: Mesa Intel UHD Graphics 620 (KBL GT2) v: 4.6 Mesa 21.2.5 direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel alternate: snd_soc_skl
bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
Sound Server-1: ALSA v: k5.10.0-13-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel modules: wl port: f040 bus-ID: 02:00.0
chip-ID: 8086:24fd class-ID: 0280
IF: wlan0 state: down mac: <filter>
Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus-ID: 2-3.1:3 chip-ID: 0bda:8153
class-ID: 0000 serial: <filter>
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: tailscale0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-8:4 chip-ID: 8087:0a2b
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2 sub-v: 100 hci-v: 4.2
rev: 100
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch hold sniff link-mode: slave accept
service-classes: rendering, capturing, object transfer, audio
Drives: Local Storage: total: 465.76 GiB used: 139.53 GiB (30.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO M.2 500GB size: 465.76 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 4B6Q scheme: GPT
Partition: ID-1: / raw-size: 63.98 GiB size: 63.98 GiB (100.00%) used: 40.1 GiB (62.7%) fs: btrfs dev: /dev/dm-0
maj-min: 253:0 mapped: root.fsm
ID-2: /boot raw-size: 512 MiB size: 487.2 MiB (95.16%) used: 116.1 MiB (23.8%) fs: ext4 dev: /dev/sda2 maj-min: 8:2
ID-3: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-4: /home raw-size: 392.99 GiB size: 392.99 GiB (100.00%) used: 99.32 GiB (25.3%) fs: btrfs dev: /dev/dm-1
maj-min: 253:1 mapped: 1.home.fsm
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 7.98 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/dm-2 maj-min: 253:2
mapped: swap
Sensors: System Temperatures: cpu: 57.0 C mobo: N/A
Fan Speeds (RPM): cpu: 3500
Repos: Packages: 2642 note: see --pkg apt: 2629 lib: 1434 flatpak: 13
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/brave-browser.list
1: deb [arch=amd64 signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.truenetwork.ru/mxlinux/mx/repo/ bullseye main non-free
2: deb http://mirror.truenetwork.ru/mxlinux/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/polychromatic.list
1: deb http://ppa.launchpad.net/polychromatic/stable/ubuntu focal main
Active apt repos in: /etc/apt/sources.list.d/signal-xenial.list
1: deb [arch=amd64 signed-by=/usr/share/keyrings/signal-desktop-keyring.gpg] https://updates.signal.org/desktop/apt xenial main
Active apt repos in: /etc/apt/sources.list.d/tailscale.list
1: deb [signed-by=/usr/share/keyrings/tailscale-archive-keyring.gpg] https://pkgs.tailscale.com/stable/debian bullseye main
Info: Processes: 332 Uptime: 1h 34m wakeups: 22 Memory: 7.63 GiB used: 3.36 GiB (44.0%) Init: SysVinit v: 2.96
runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4
running-in: quick-system-info-mx inxi: 3.3.06
Boot Mode: UEFI
I've read through that page, there is a little clarification of the reasons, but, unfortunately, no solutions. 