TuxMath Factoroids

Help for MX Fluxbox
When asking for help, use Quick System Info from MX Tools. It will be properly formatted using the following steps.
1. Click on Quick System Info in MX Tools
2. Right click in your post and paste.
Message
Author
User avatar
Amiga-MX
Posts: 236
Joined: Sun Jan 23, 2022 4:27 pm

TuxMath Factoroids

#1 Post by Amiga-MX »

Good morning.

I get TuxMath from MX stable repo. Playing factoroids, if I fire quickly the program crash. Receiving this error:

Code: Select all

$ tuxmath
Initializing Tux4Kids-Common 0.1.1
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
T4K_LoadMusic(): /usr/share/tuxmath/sounds/game.mod not loaded successfully
Error was: Module format not recognized

T4K_LoadMusic(): /usr/share/tuxmath/sounds/game2.mod not loaded successfully
Error was: Module format not recognized

T4K_LoadMusic(): /usr/share/tuxmath/sounds/game2.mod not loaded successfully
Error was: Module format not recognized

T4K_LoadMusic(): /usr/share/tuxmath/sounds/game2.mod not loaded successfully
Error was: Module format not recognized

T4K_LoadMusic(): /usr/share/tuxmath/sounds/game.mod not loaded successfully
Error was: Module format not recognized

T4K_LoadMusic(): /usr/share/tuxmath/sounds/game3.mod not loaded successfully
Error was: Module format not recognized

T4K_LoadMusic(): /usr/share/tuxmath/sounds/game3.mod not loaded successfully
Error was: Module format not recognized

Segment violation.
System Info.

Code: Select all

[code]
System:    Kernel: 5.10.0-11-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-11-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Fluxbox 1.3.7 info: tint2 vt: 7 dm: LightDM 1.26.0 
           Distro: MX-21_fluxbox_x64 Wildflower Oct 20  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop System: Apple product: iMac10,1 v: 1.0 serial: <filter> Chassis: 
           type: 13 v: Mac-F2268CC8 serial: <filter> 
           Mobo: Apple model: Mac-F2268CC8 serial: <filter> UEFI: Apple 
           v: IM101.88Z.00CC.B00.0909031926 date: 09/03/09 
CPU:       Info: Dual Core model: Intel Core2 Duo E7600 bits: 64 type: MCP arch: Penryn 
           family: 6 model-id: 17 (23) stepping: A (10) microcode: A0B cache: L2: 3 MiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 12205 
           Speed: 1598 MHz min/max: 1596/3059 MHz Core speeds (MHz): 1: 1598 2: 1605 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA MCP7A [GeForce 9400] vendor: Apple driver: nvidia v: 340.108 
           bus-ID: 03:00.0 chip-ID: 10de:0869 class-ID: 0300 
           Device-2: Apple Built-in iSight type: USB driver: uvcvideo bus-ID: 1-4:3 
           chip-ID: 05ac:8502 class-ID: 0e02 serial: <filter> 
           Display: x11 server: X.Org 1.20.11 driver: loaded: nvidia 
           unloaded: fbdev,modesetting,nouveau,vesa alternate: nv display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 101 s-size: 483x272mm (19.0x10.7") 
           s-diag: 554mm (21.8") 
           Monitor-1: LVDS-0 res: 1920x1080 hz: 60 dpi: 103 size: 475x267mm (18.7x10.5") 
           diag: 545mm (21.5") 
           OpenGL: renderer: GeForce 9400/integrated/SSE2 v: 3.3.0 NVIDIA 340.108 
           direct render: Yes 
Audio:     Device-1: NVIDIA MCP79 High Definition Audio driver: snd_hda_intel v: kernel 
           bus-ID: 00:08.0 chip-ID: 10de:0ac0 class-ID: 0403 
           Sound Server-1: ALSA v: k5.10.0-11-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:   Device-1: NVIDIA MCP79 Ethernet driver: forcedeth v: kernel port: 21e0 
           bus-ID: 00:0a.0 chip-ID: 10de:0ab0 class-ID: 0200 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           Device-2: Qualcomm Atheros AR928X Wireless Network Adapter 
           vendor: Apple AirPort Extreme driver: ath9k v: kernel modules: wl port: 1000 
           bus-ID: 04:00.0 chip-ID: 168c:002a class-ID: 0280 
           IF: wlan0 state: down mac: <filter> 
Bluetooth: Device-1: Apple Built-in Bluetooth 2.0+EDR HCI type: USB driver: btusb v: 0.8 
           bus-ID: 4-1.1:3 chip-ID: 05ac:8215 class-ID: fe01 serial: <filter> 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 1.2 lmp-v: 2.1 
           sub-v: 21d0 hci-v: 2.1 rev: 206 
           Info: acl-mtu: 1021:5 sco-mtu: 64:1 link-policy: rswitch hold sniff park 
           link-mode: slave accept 
Drives:    Local Storage: total: 465.76 GiB used: 63.79 GiB (13.7%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HDT721050SLA360 size: 465.76 GiB 
           block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 
           serial: <filter> rev: A36E scheme: GPT 
Partition: ID-1: / raw-size: 460 GiB size: 451.71 GiB (98.20%) used: 62.93 GiB (13.9%) fs: ext4 
           dev: /dev/sda2 maj-min: 8:2 
           ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) 
           fs: vfat dev: /dev/sda1 maj-min: 8:1 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 5.5 GiB used: 880.9 MiB (15.6%) priority: -2 
           dev: /dev/sda3 maj-min: 8:3 
Sensors:   System Temperatures: cpu: 57.0 C mobo: N/A 
           Fan Speeds (RPM): cpu: 1734 
Repos:     Packages: 2394 note: see --pkg apt: 2380 lib: 1254 flatpak: 14 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/keybase.list 
           1: deb http://prerelease.keybase.io/deb stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bullseye main non-free
Info:      Processes: 236 Uptime: 1d 8h 28m wakeups: 1 Memory: 3.59 GiB used: 2.14 GiB (59.5%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 
           alt: 10 Shell: quick-system-in default: Bash v: 5.1.4 running-in: quick-system-in 
           inxi: 3.3.06 
[/code]

I wonder is someone else have experimented this issue.
If the program is unstable I'll ask to move it away from the stable repo. Anyway I'm new to MX and don't know how MX repo policy works.

Thanks
MXMLGE
Last edited by Amiga-MX on Sat Feb 12, 2022 11:17 pm, edited 1 time in total.

SwampRabbit
Posts: 3602
Joined: Tue Jun 14, 2016 2:02 pm

Re: TuxMath Factoroids

#2 Post by SwampRabbit »

@Amiga-MX unfortunately tuxmath is coming from Debian's repos and not ours.

But please share your Quick System Info if you want help attempting to see if it can be fixed on MX.

If not, Debian is the best place to report the issue. They will also want system information and probably some logs too.
I'd say report to report and issue at the developer's GitHub first, but it seems stale now. The latest fixes (2021) were actually done at the Debian level.


Note, this section of the forum isn't for general application/package help, it is really for requests for new or updated packages.

But don't worry, the thread can be moved when one of the admins sees this or my request to have it moved.
NEW USERS START HERE FAQS, MX Manual, and How to Break Your System - Don't use Ubuntu PPAs! Always post your Quick System Info (QSI) when asking for help.

User avatar
Amiga-MX
Posts: 236
Joined: Sun Jan 23, 2022 4:27 pm

Re: TuxMath Factoroids

#3 Post by Amiga-MX »

@SwampRabbit

As I saw the derivative issues, from the original project in git, in to debian, to the mx, I didn't share my system info as I believe that it doesn't show any clue related with tuxmath. The crash info has been taken from the terminal. That's what I get. For that reason I decide to ask for help, if there is someone that can confirm the issue, or maybe someone that have a local solution. I was searching for the best place in the forum, I launched the coin, that's what I got here. Please can you move it where you think is better place. Sorry for that. Also I said from stable repo when it's not, I got confused with to many.

Tell me, have you tried tuxmath factoroids ?

Thank you.

Post Reply

Return to “MX Fluxbox Official Release”