MX-21 "ahs" (Xfce) RC3 feedback

Forum rules
Locked
Message
Author
User avatar
Paul..
Posts: 1787
Joined: Sun Mar 18, 2007 6:34 pm

Re: MX-21 "ahs" (Xfce) RC3 feedback

#31 Post by Paul.. »

dr-kart wrote: Fri Oct 29, 2021 9:46 am
Here is what I did before:
Installed both 32 and 64 bit vulkan soft:

Code: Select all

libvulkan1:i386
mesa-vulkan-drivers:i386
libvulkan1
mesa-vulkan-drivers
and here edited /etc/environment:

Code: Select all

VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/radeon_icd.i686.json:/usr/share/vulkan/icd.d/radeon_icd.x86_64.json
LIBVA_DRIVER_NAME=radeonsi
@dr-kart Thanks much for your detailed answer. I tested the following:
1. I installed the 386 vulkan stuff and added the code to /etc/environment...and it worked.
2. I'm still mystified why stock MX-21 works fine with War Thunder on
Graphics renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.40.0 5.10.0-9-amd64 LLVM 11.0.1)
v: 4.6 Mesa 20.3.5 direct render: Yes

But...MX-21 AHS RC3 crashes War Thunder without your workaround
Graphics renderer: AMD Radeon RX 5600 XT (NAVI10 DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1)
v: 4.6 Mesa 21.2.3 direct render: Yes


Bottom line: Your workaround is successful...but I'm not sure how @SwampRabbit and @dolphin_oracle can put it into AHS...perhaps we should stick with Mesa 20.3.5 for a while in AHS?

Asus Prime X570-Pro | AMD Ryzen 7 3700X
16 Gig DDR4 3600 | Radeon RX 5600 XT Graphics
Samsung 860 500GB SSDs (2)
Top
dr-kart
Posts: 153
Joined: Sun Oct 22, 2017 8:12 pm

Re: MX-21 "ahs" (Xfce) RC3 feedback

#32 Post by dr-kart »

@Paul.. Glad it was helpful.
Fresh AMD|Radeon hardware owners should definitely stick with newest Mesa drivers (v.21.2.4 stable at the moment). I don't see any reason against.
And @SwampRabbit is cooking that for us. Kudos.
Top
User avatar
dolphin_oracle
Developer
Posts: 22343
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-21 "ahs" (Xfce) RC3 feedback

#33 Post by dolphin_oracle »

danielson wrote: Sat Oct 30, 2021 8:35 am @dolphin_oracle - suspenders work better for some than others eh!

Rather than tinkering with downgrading/upgrading kernel, will stick with MX21 "normal" for now since its "suspender" works fine here.
(never cared for suspenders - don't know how men could ever wear those things).
LOL! when I'm old and fat I'm totally going all suspenders :p
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
Paul..
Posts: 1787
Joined: Sun Mar 18, 2007 6:34 pm

Re: MX-21 "ahs" (Xfce) RC3 feedback

#34 Post by Paul.. »

dr-kart wrote: Sat Oct 30, 2021 10:10 am @Paul.. Glad it was helpful.
Fresh AMD|Radeon hardware owners should definitely stick with newest Mesa drivers (v.21.2.4 stable at the moment). I don't see any reason against.
And @SwampRabbit is cooking that for us. Kudos.
Okay...standing by to test that!!

Asus Prime X570-Pro | AMD Ryzen 7 3700X
16 Gig DDR4 3600 | Radeon RX 5600 XT Graphics
Samsung 860 500GB SSDs (2)
Top
User avatar
talera
Posts: 75
Joined: Mon Nov 16, 2020 7:51 am

Re: MX-21 "ahs" (Xfce) RC3 feedback

#35 Post by talera »

Hello,

I have tried out MX21 ahs XFCE RC3 after playing around with MX21 KDE.
As I am using a more recent GPU and KDE gave me some troubles at first (https://forum.mxlinux.org/viewtopic.php?t=67098 and https://forum.mxlinux.org/viewtopic.php?t=67125),
I was curious if I would encounter similar problems here.

In Short: I did not :)

The installation was smooth and without any problems and every piece of hardware was detected correctly. Boot, Reboot, Shutdown, MXPI... everything fine.

As I am more into gaming I tried both a linux native game via steam (Total War Warhammer 2) and a Windows Game via lutris with the use of wine & vulkan (Final Fantasy 14, DirectX 11).
Both had no issues at all and I could not determine any great differences in my performance compared to Arch.

There was no need for me to do any modification on my installation apart from installing the usual packages for gaming and the configuration of esync.

A really nice experience, thank you for that!

This leads me to a question however: Do you by chance intend to make a KDE AHS version (not just ahs enabled) just like this XFCE one for KDE-lovers with a newer GPU?
Just curious :)

Thanks!

---------------

Code: Select all

System:    Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.14.0-3mx-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_ahs_rc3_x64 Wildflower October 25  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop System: Gigabyte product: X570 AORUS ULTRA v: -CF serial: <filter> 
           Mobo: Gigabyte model: X570 AORUS ULTRA v: x.x serial: <filter> 
           UEFI: American Megatrends LLC. v: F34 date: 07/08/2021 
CPU:       Topology: 8-Core model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen 
           family: 17 (23) model-id: 71 (113) stepping: N/A microcode: 8701021 
           L2 cache: 4096 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
           bogomips: 114984 
           Speed: 2196 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz): 1: 2196 
           2: 2195 3: 2196 4: 2190 5: 1863 6: 2126 7: 2198 8: 2196 9: 2195 10: 2195 11: 2196 
           12: 2195 13: 2196 14: 2195 15: 2194 16: 2196 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 
           mitigation: Full AMD retpoline, IBPB: conditional, STIBP: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT / 6800M] vendor: XFX Limited 
           driver: amdgpu v: kernel bus ID: 0d:00.0 chip ID: 1002:73df 
           Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati 
           unloaded: fbdev,modesetting,radeon,vesa resolution: 2560x1440~144Hz 
           OpenGL: renderer: AMD Radeon RX 6700 XT (NAVY_FLOUNDER DRM 3.42.0 5.14.0-3mx-amd64 
           LLVM 12.0.1) 
           v: 4.6 Mesa 21.2.3 direct render: Yes 
Audio:     Device-1: AMD Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT] 
           driver: snd_hda_intel v: kernel bus ID: 0d:00.1 chip ID: 1002:ab28 
           Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte driver: snd_hda_intel 
           v: kernel bus ID: 0f:00.4 chip ID: 1022:1487 
           Sound Server: ALSA v: k5.14.0-3mx-amd64 
Network:   Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus ID: 06:00.0 
           chip ID: 8086:2723 
           IF: wlan0 state: down mac: <filter> 
           Device-2: Intel I211 Gigabit Network vendor: Gigabyte driver: igb v: kernel 
           port: f000 bus ID: 07:00.0 chip ID: 8086:1539 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 2.56 TiB used: 468.63 GiB (17.9%) 
           ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 970 EVO Plus 1TB size: 931.51 GiB 
           block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> 
           rev: 2B2QEXM7 scheme: GPT 
           ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 970 EVO Plus 500GB size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> 
           rev: 2B2QEXM7 scheme: GPT 
           ID-3: /dev/nvme2n1 vendor: Samsung model: SSD 970 EVO Plus 500GB size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> 
           rev: 2B2QEXM7 scheme: GPT 
           ID-4: /dev/sda vendor: Crucial model: CT1000MX500SSD1 size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 032 scheme: GPT 
           ID-5: /dev/sdb vendor: Crucial model: CT250MX500SSD1 size: 232.89 GiB block size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 043 scheme: GPT 
           ID-6: /dev/sdc type: USB vendor: SanDisk model: Extreme size: 59.63 GiB block size: 
           physical: 512 B logical: 512 B serial: <filter> rev: 0001 scheme: MBR 
Partition: ID-1: / raw size: 100.00 GiB size: 97.87 GiB (97.87%) used: 7.78 GiB (7.9%) fs: ext4 
           dev: /dev/sda3 
           ID-2: /home raw size: 100.00 GiB size: 97.87 GiB (97.87%) used: 4.32 GiB (4.4%) 
           fs: ext4 dev: /dev/sda4 
Sensors:   System Temperatures: cpu: 52.4 C mobo: N/A gpu: amdgpu temp: 56 C 
           Fan Speeds (RPM): N/A gpu: amdgpu fan: 0 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye main non-free
           2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye ahs
Info:      Processes: 391 Uptime: 1h 58m Memory: 31.30 GiB used: 1.92 GiB (6.1%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36
Top
SwampRabbit
Posts: 3602
Joined: Tue Jun 14, 2016 2:02 pm

Re: MX-21 "ahs" (Xfce) RC3 feedback

#36 Post by SwampRabbit »

talera wrote: Sun Oct 31, 2021 10:19 pm ...

This leads me to a question however: Do you by chance intend to make a KDE AHS version (not just ahs enabled) just like this XFCE one for KDE-lovers with a newer GPU?
Just curious :)

Thanks!
Thank you for the feedback, I had the feeling MX AHS would cause less problems. Remember with you're particular system, it needs a kernel higher than 5.10, which is the stable kernel we are tracking based off of Debian.
That is the only back-end difference between MX-KDE (5.10) and MX AHS (5.14).

As MX-KDE needs to meet the normal MX requirement of long term stability for the majority of users, I don't know if the next release of MX-KDE (21.1) will have the 5.14 kernel from AHS or not, but right now I think it needs more time to mature. Heck we could be at kernel 5.15 by then.

I do not believe there is any intent on releasing another version of MX-KDE just to include kernel 5.14, that's a lot of work, but @Adrian is the man for MX-KDE stuffs, I just handling the packaging and initial major testing for AHS.

It isn't hard for someone to add the 5.14 kernel or other kernels to MX-KDE, its a lot easier than trying to deal with the majority of MX-KDE users having issues because we use a more bleeding edge kernel. This should only affect users who have hardware that came out after around March of this year (like your GPU), in the grand scheme of things... especially with GPU and hardware prices in general, the number of users who use MX-KDE and HAVE to updated to kernel 5.14 are very small.
NEW USERS START HERE FAQS, MX Manual, and How to Break Your System - Don't use Ubuntu PPAs! Always post your Quick System Info (QSI) when asking for help.
Top
User avatar
Alex
Posts: 3
Joined: Sat Jun 19, 2021 4:47 am

Re: MX-21 "ahs" (Xfce) RC3 feedback

#37 Post by Alex »

No Boot Device Found *updated* *solved & please ignore*

[spoiler]I'm currently trying to run MX-21_ahs_rc3_x64 Wildflower October 25, 2021. I previously installed Fluxbox and KDE from USB Live System and both worked fine. Now I tried the same with the Xfce Version and it does not boot. When i install GRUB, boot from Live USB, select Rescue and Grub i can find a Grub Menu on my drive and can boot, but without installing grub it just says "No Boot Device Found".

As i stated i tried different Versions and also changed BIOS settings, so i cannot say which settings specifically worked previously. For the latest installation i had Legacy and Secure Boot disabled and Fastboot disabled. I did not install grub this time to see if it works but it does not.

Currently I am downloading the Xfce Version without ahs and will try that.

My System Information

Code: Select all

System:    Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_ahs_rc3_x64 Wildflower October 25  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: HP product: HP ProBook 455 G4 v: N/A serial: <filter> Chassis: 
           type: 10 serial: <filter> 
           Mobo: HP model: 823E v: KBC Version 37.28 serial: <filter> UEFI: HP v: P84 Ver. 01.01 
           date: 08/18/2016 
Battery:   ID-1: BAT0 charge: 26.5 Wh condition: 34.7/34.7 Wh (100%) volts: 11.4/11.4 
           model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Discharging 
CPU:       Topology: Dual Core model: AMD A6-9210 RADEON R4 5 COMPUTE CORES 2C+3G bits: 64 
           type: MCP arch: Excavator family: 15 (21) model-id: 70 (112) stepping: N/A 
           microcode: 6006704 L2 cache: 1024 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 9581 
           Speed: 1296 MHz min/max: 1300/2400 MHz boost: enabled Core speeds (MHz): 1: 1297 
           2: 1297 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full AMD retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: AMD Stoney [Radeon R2/R3/R4/R5 Graphics] vendor: Hewlett-Packard 
           driver: amdgpu v: kernel bus ID: 00:01.0 chip ID: 1002:98e4 
           Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati 
           unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz 
           OpenGL: renderer: AMD STONEY (DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1) 
           v: 4.5 Mesa 21.2.3 direct render: Yes 
Audio:     Device-1: AMD vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:01.1 
           chip ID: 1002:15b3 
           Device-2: AMD Family 15h Audio vendor: Hewlett-Packard driver: snd_hda_intel 
           v: kernel bus ID: 00:09.2 chip ID: 1022:157a 
           Sound Server: ALSA v: k5.14.0-3mx-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 01:00.0 
           chip ID: 10ec:8168 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel port: 2000 bus ID: 02:00.0 
           chip ID: 8086:095a 
           IF: wlan0 state: down mac: <filter> 
Drives:    Local Storage: total: 140.44 GiB used: 21.3 MiB (0.0%) 
           ID-1: /dev/sda vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 00RL scheme: GPT 
           ID-2: /dev/sdb type: USB vendor: SanDisk model: Ultra size: 28.64 GiB block size: 
           physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR 
Partition: ID-1: / raw size: N/A size: 2.90 GiB used: 21.3 MiB (0.7%) fs: overlay 
           source: ERR-102 
           ID-2: swap-1 size: 5.62 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 56.0 C mobo: 0.0 C gpu: amdgpu temp: 56 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
           2: deb http://mxrepo.com/mx/repo/ bullseye ahs
Info:      Processes: 202 Uptime: N/A Memory: 3.70 GiB used: 787.8 MiB (20.8%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36
Install Log (WARNING: Couldn't determine root device\nsed -> one of the last lines)

Code: Select all

2021-11-02 03:26:53.417 DBG default: Installer version: 21.10.14
2021-11-02 03:26:53.659 DBG default: << void MInstall::startup() >>
2021-11-02 03:26:53.660 DBG default: check for remastered home demo folder: false
2021-11-02 03:26:53.660 DBG default: Exec #1: du -sb /live/aufs/boot
2021-11-02 03:26:53.746 DBG default: Exit #1: 0 QProcess::NormalExit
2021-11-02 03:26:53.746 DBG default: linuxfs file is at :  "/live/boot-dev/antiX/linuxfs"
2021-11-02 03:26:53.746 DBG default: Exec #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2021-11-02 03:26:53.760 DBG default: Exit #2: 0 QProcess::NormalExit
2021-11-02 03:26:53.761 DBG default: linuxfs compression type is  "6" compression factor is  25
2021-11-02 03:26:53.761 DBG default: Exec #3: df /live/linux --output=used --total |tail -n1
2021-11-02 03:26:53.771 DBG default: Exit #3: 0 QProcess::NormalExit
2021-11-02 03:26:53.772 DBG default: linuxfs file size is  7366246400  rootfs file size is  0
2021-11-02 03:26:53.772 DBG default: Minimum space: 268435456 (boot), 8439988224 (root)
2021-11-02 03:26:53.772 DBG default: Exec #4: uname -m | grep -q i686
2021-11-02 03:26:53.782 DBG default: Exit #4: 1 QProcess::NormalExit
2021-11-02 03:26:53.782 DBG default: uefi = true
2021-11-02 03:26:53.782 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 03:26:53.782 DBG default: Exec #5: ps -e | grep 'udisksd'
2021-11-02 03:26:53.808 DBG default: SOut #5: "   6204 ?        00:00:00 udisksd\n"
2021-11-02 03:26:53.808 DBG default: Exit #5: 0 QProcess::NormalExit
2021-11-02 03:26:53.808 DBG default: Exec #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-11-02 03:26:53.828 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2021-11-02 03:26:53.828 DBG default: Exit #6: 2 QProcess::NormalExit
2021-11-02 03:26:53.828 DBG default: Exec #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2021-11-02 03:26:53.844 DBG default: Exit #7: 1 QProcess::NormalExit
2021-11-02 03:26:53.845 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2021-11-02 03:26:53.845 DBG default: Exec #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-11-02 03:26:53.852 DBG default: Exit #8: 0 QProcess::NormalExit
2021-11-02 03:26:53.852 DBG default: Exec #9: udevadm control --reload
2021-11-02 03:26:53.893 DBG default: Exit #9: 0 QProcess::NormalExit
2021-11-02 03:26:53.893 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2021-11-02 03:26:53.908 DBG default: Exit #10: 0 QProcess::NormalExit
2021-11-02 03:26:53.908 DBG default: Exec #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2021-11-02 03:26:53.921 DBG default: Exit #11: 1 QProcess::NormalExit
2021-11-02 03:26:53.921 DBG default: check for possible snapshot: false
2021-11-02 03:26:54.071 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2021-11-02 03:26:54.085 DBG default: Exit #12: 0 QProcess::NormalExit
2021-11-02 03:26:54.088 DBG default: Exec #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2021-11-02 03:26:54.106 DBG default: Exit #13: 0 QProcess::NormalExit
2021-11-02 03:26:54.107 DBG default: Exec #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2021-11-02 03:26:54.207 DBG default: Exit #14: 1 QProcess::NormalExit
2021-11-02 03:26:54.207 DBG default: Exec #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2021-11-02 03:26:54.248 DBG default: Exit #15: 0 QProcess::NormalExit
2021-11-02 03:26:54.254 DBG default: << void MInstall::updatePartitionWidgets(bool) >>
2021-11-02 03:26:54.254 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-11-02 03:26:54.270 DBG default: Exit #16: 0 QProcess::NormalExit
2021-11-02 03:26:54.270 DBG default: Exec #17: partprobe -s
2021-11-02 03:26:55.599 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:26:55.599 DBG default: SErr #17: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.\n"
2021-11-02 03:26:55.599 DBG default: Exit #17: 1 QProcess::NormalExit
2021-11-02 03:26:55.599 DBG default: Exec #18: blkid -c /dev/null
2021-11-02 03:26:55.709 DBG default: SOut #18: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"5983-8B16\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"24102219-523e-4445-bcfe-9983da03b775\"\n/dev/sda2: LABEL=\"rootMX21\" UUID=\"5ec45faf-3fbd-4209-8444-616d35dd84ad\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"2f508784-8ce8-4d30-968a-bb47aa5a3b27\"\n/dev/sda3: LABEL=\"swapMX\" UUID=\"7bcef7db-366f-4a28-983b-abbcd3e93554\" TYPE=\"swap\" PARTLABEL=\"primary\" PARTUUID=\"24717057-588d-42d3-8d90-59150c78f5b9\"\n/dev/sdb1: BLOCK_SIZE=\"2048\" UUID=\"2021-10-26-00-31-12-00\" LABEL=\"MX-Live\" TYPE=\"iso9660\" PTUUID=\"103fdffb\" PTTYPE=\"dos\" PARTUUID=\"103fdffb-01\"\n/dev/sdb2: SEC_TYPE=\"msdos\" LABEL_FATBOOT=\"EFI-LIVE\" LABEL=\"EFI-LIVE\" UUID=\"7249-CF0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"103fdffb-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-11-02 03:26:55.709 DBG default: Exit #18: 0 QProcess::NormalExit
2021-11-02 03:26:55.709 DBG default: Exec #19: parted -lm
2021-11-02 03:26:55.940 DBG default: Exit #19: 0 QProcess::NormalExit
2021-11-02 03:26:55.941 DBG default: Exec #20: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-11-02 03:26:55.962 DBG default: Exit #20: 32 QProcess::NormalExit
2021-11-02 03:27:00.531 DBG default: Exec #21: command -v  system-keyboard-qt >/dev/null 2>&1
2021-11-02 03:27:00.571 DBG default: Exit #21: 0 QProcess::NormalExit
2021-11-02 03:27:00.571 DBG default: Exec #22: system-keyboard-qt
2021-11-02 03:27:20.854 DBG default: SErr #22: "\n(system-keyboard-qt:6497): Gtk-WARNING **: 03:27:00.638: Unable to locate theme engine in module_path: \"clearlooks\",\n\n(system-keyboard-qt:6497): Gtk-WARNING **: 03:27:00.639: Unable to locate theme engine in module_path: \"clearlooks\",\n\"BACKSPACE\" = \"guess\"\n\"XKBLAYOUT\" = \"us\"\n\"XKBMODEL\" = \"pc105\"\n\"XKBOPTIONS\" = \"grp:rctrl_rshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll\"\n\"XKBVARIANT\" = \"\"\nqt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 912, resource id: 18879146, major code: 40 (TranslateCoords), minor code: 0\n\"# KEYBOARD CONFIGURATION FILE\\n\\n# Consult the keyboard(5) manual page.\\n\\nXKBMODEL=\\\"pc105\\\"\\nXKBLAYOUT=\\\"de\\\"\\nXKBVARIANT=\\\"\\\"\\nXKBOPTIONS=\\\"grp:rctrl_rshift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp\\\"\\n\\nBACKSPACE=\\\"guess\\\"\\n\"\n"
2021-11-02 03:27:20.854 DBG default: Exit #22: 0 QProcess::NormalExit
2021-11-02 03:27:41.221 DBG default: Mount points:
2021-11-02 03:27:41.221 DBG default:  - "/" - "sda2" "sda2" "/dev/sda2"
2021-11-02 03:27:41.221 DBG default:  - "SWAP" - "sda3" "sda3" "/dev/sda3"
2021-11-02 03:27:41.241 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1260, resource id: 18881660, major code: 40 (TranslateCoords), minor code: 0
2021-11-02 03:27:41.314 DBG default: ++ Preparing to install MX Linux ++
2021-11-02 03:27:41.319 DBG default: Exec #23: smartctl -H /dev/sda
2021-11-02 03:27:41.864 DBG default: SOut #23: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2021-11-02 03:27:41.864 DBG default: Exit #23: 0 QProcess::NormalExit
2021-11-02 03:27:41.864 DBG default: Exec #24: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2021-11-02 03:27:41.912 DBG default: Exit #24: 0 QProcess::NormalExit
2021-11-02 03:27:41.913 DBG default: << void MInstall::cleanup(bool) >>
2021-11-02 03:27:41.913 DBG default: Exec #25: /bin/umount -l /mnt/antiX/boot/efi
2021-11-02 03:27:41.924 DBG default: SErr #25: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2021-11-02 03:27:41.924 DBG default: Exit #25: 32 QProcess::NormalExit
2021-11-02 03:27:41.924 DBG default: Exec #26: /bin/umount -l /mnt/antiX/proc
2021-11-02 03:27:41.934 DBG default: SErr #26: "umount: /mnt/antiX/proc: no mount point specified.\n"
2021-11-02 03:27:41.934 DBG default: Exit #26: 32 QProcess::NormalExit
2021-11-02 03:27:41.934 DBG default: Exec #27: /bin/umount -l /mnt/antiX/sys
2021-11-02 03:27:41.945 DBG default: SErr #27: "umount: /mnt/antiX/sys: no mount point specified.\n"
2021-11-02 03:27:41.945 DBG default: Exit #27: 32 QProcess::NormalExit
2021-11-02 03:27:41.945 DBG default: Exec #28: /bin/umount -l /mnt/antiX/dev/shm
2021-11-02 03:27:41.955 DBG default: SErr #28: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2021-11-02 03:27:41.955 DBG default: Exit #28: 32 QProcess::NormalExit
2021-11-02 03:27:41.955 DBG default: Exec #29: /bin/umount -l /mnt/antiX/dev
2021-11-02 03:27:41.964 DBG default: SErr #29: "umount: /mnt/antiX/dev: no mount point specified.\n"
2021-11-02 03:27:41.964 DBG default: Exit #29: 32 QProcess::NormalExit
2021-11-02 03:27:41.964 DBG default: Exec #30: swapoff /dev/sda2
2021-11-02 03:27:41.977 DBG default: SErr #30: "swapoff: /dev/sda2: swapoff failed: Invalid argument\n"
2021-11-02 03:27:41.977 DBG default: Exit #30: 4 QProcess::NormalExit
2021-11-02 03:27:41.977 DBG default: Exec #31: /bin/umount -l /mnt/antiX/
2021-11-02 03:27:41.987 DBG default: SErr #31: "umount: /mnt/antiX/: no mount point specified.\n"
2021-11-02 03:27:41.988 DBG default: Exit #31: 32 QProcess::NormalExit
2021-11-02 03:27:41.988 DBG default: << bool PartMan::preparePartitions() >>
2021-11-02 03:27:41.988 DBG default: Exec #32: lsblk -nro name /dev/sda
2021-11-02 03:27:42.001 DBG default: Exit #32: 0 QProcess::NormalExit
2021-11-02 03:27:42.001 DBG default: Exec #33: swapoff /dev/sda
2021-11-02 03:27:42.011 DBG default: SErr #33: "swapoff: /dev/sda: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.011 DBG default: Exit #33: 4 QProcess::NormalExit
2021-11-02 03:27:42.011 DBG default: Exec #34: /bin/umount /dev/sda
2021-11-02 03:27:42.023 DBG default: SErr #34: "umount: /dev/sda: not mounted.\n"
2021-11-02 03:27:42.023 DBG default: Exit #34: 32 QProcess::NormalExit
2021-11-02 03:27:42.023 DBG default: Exec #35: swapoff /dev/sda2
2021-11-02 03:27:42.036 DBG default: SErr #35: "swapoff: /dev/sda2: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.036 DBG default: Exit #35: 4 QProcess::NormalExit
2021-11-02 03:27:42.036 DBG default: Exec #36: /bin/umount /dev/sda2
2021-11-02 03:27:42.051 DBG default: SErr #36: "umount: /dev/sda2: not mounted.\n"
2021-11-02 03:27:42.051 DBG default: Exit #36: 32 QProcess::NormalExit
2021-11-02 03:27:42.051 DBG default: Exec #37: swapoff /dev/sda3
2021-11-02 03:27:42.067 DBG default: Exit #37: 0 QProcess::NormalExit
2021-11-02 03:27:42.068 DBG default: Exec #38: /bin/umount /dev/sda3
2021-11-02 03:27:42.081 DBG default: SErr #38: "umount: /dev/sda3: not mounted.\n"
2021-11-02 03:27:42.081 DBG default: Exit #38: 32 QProcess::NormalExit
2021-11-02 03:27:42.081 DBG default: Exec #39: swapoff /dev/sda1
2021-11-02 03:27:42.092 DBG default: SErr #39: "swapoff: /dev/sda1: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.092 DBG default: Exit #39: 4 QProcess::NormalExit
2021-11-02 03:27:42.092 DBG default: Exec #40: /bin/umount /dev/sda1
2021-11-02 03:27:42.105 DBG default: SErr #40: "umount: /dev/sda1: not mounted.\n"
2021-11-02 03:27:42.105 DBG default: Exit #40: 32 QProcess::NormalExit
2021-11-02 03:27:42.105 DBG default: ++ Preparing partition tables ++
2021-11-02 03:27:42.110 DBG default: Exec #41: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda
2021-11-02 03:27:42.164 DBG default: SErr #41: "64+0 records in\n64+0 records out\n4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.0411501 s, 102 MB/s\n"
2021-11-02 03:27:42.164 DBG default: Exit #41: 0 QProcess::NormalExit
2021-11-02 03:27:42.164 DBG default: Exec #42: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda seek=1831617
2021-11-02 03:27:42.220 DBG default: SErr #42: "dd: error writing '/dev/sda': No space left on device\n64+0 records in\n63+0 records out\n4128768 bytes (4.1 MB, 3.9 MiB) copied, 0.0359852 s, 115 MB/s\n"
2021-11-02 03:27:42.220 DBG default: Exit #42: 1 QProcess::NormalExit
2021-11-02 03:27:42.220 DBG default: Exec #43: parted -s /dev/sda mklabel gpt
2021-11-02 03:27:42.281 DBG default: Exit #43: 0 QProcess::NormalExit
2021-11-02 03:27:42.281 DBG default: ++ Preparing required partitions ++
2021-11-02 03:27:42.291 DBG default: Exec #44: parted -s --align optimal /dev/sda mkpart primary 1MiB 257MiB
2021-11-02 03:27:42.370 DBG default: Exit #44: 0 QProcess::NormalExit
2021-11-02 03:27:42.376 DBG default: Exec #45: parted -s --align optimal /dev/sda mkpart primary 257MiB 108713MiB
2021-11-02 03:27:42.499 DBG default: Exit #45: 0 QProcess::NormalExit
2021-11-02 03:27:42.506 DBG default: Exec #46: parted -s --align optimal /dev/sda mkpart primary 108713MiB 114473MiB
2021-11-02 03:27:42.679 DBG default: Exit #46: 0 QProcess::NormalExit
2021-11-02 03:27:42.733 DBG default: Exec #47: partprobe -s
2021-11-02 03:27:44.153 DBG default: SOut #47: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:27:44.153 DBG default: SErr #47: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.\n"
2021-11-02 03:27:44.153 DBG default: Exit #47: 1 QProcess::NormalExit
2021-11-02 03:27:44.153 DBG default: << bool PartMan::formatPartitions() >>
2021-11-02 03:27:44.153 DBG default: ++ Formatting: EFI System Partition ++
2021-11-02 03:27:44.163 DBG default: Exec #48: mkfs.msdos -F 32 -n "EFI System" /dev/sda1
2021-11-02 03:27:44.424 DBG default: SOut #48: "mkfs.fat 4.2 (2021-01-31)\n"
2021-11-02 03:27:44.425 DBG default: SErr #48: "mkfs.fat: Warning: lowercase labels might not work properly on some systems\n"
2021-11-02 03:27:44.425 DBG default: Exit #48: 0 QProcess::NormalExit
2021-11-02 03:27:44.425 DBG default: Exec #49: parted -s /dev/sda set 1 esp on
2021-11-02 03:27:44.536 DBG default: Exit #49: 0 QProcess::NormalExit
2021-11-02 03:27:44.536 DBG default: ++ Formatting: / (root) ++
2021-11-02 03:27:44.543 DBG default: Exec #50: mkfs.ext4 -F /dev/sda2 -L "rootMX21"
2021-11-02 03:27:52.005 DBG default: SOut #50: "Discarding device blocks:     4096/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b 2625536/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b 5246976/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b11014144/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b15208448/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b20451328/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b26742784/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b                 \b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\bdone                            \nCreating filesystem with 27764736 4k blocks and 6946816 inodes\nFilesystem UUID: 1cff286a-8978-489b-812b-a71e2cb0a8cb\nSuperblock backups stored on blocks: \n\t32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, \n\t4096000, 7962624, 11239424, 20480000, 23887872\n\nAllocating group tables:   0/848\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nWriting inode tables:   0/848\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nCreating journal (131072 blocks): done\nWriting superblocks and filesystem accounting information:   0/848\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone\n\n"
2021-11-02 03:27:52.005 DBG default: SErr #50: "mke2fs 1.46.2 (28-Feb-2021)\n"
2021-11-02 03:27:52.005 DBG default: Exit #50: 0 QProcess::NormalExit
2021-11-02 03:27:52.005 DBG default: Exec #51: /sbin/tune2fs -c0 -C0 -i1m /dev/sda2
2021-11-02 03:27:52.032 DBG default: SOut #51: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2021-11-02 03:27:52.032 DBG default: Exit #51: 0 QProcess::NormalExit
2021-11-02 03:27:52.032 DBG default: ++ Formatting: swap space ++
2021-11-02 03:27:52.038 DBG default: Exec #52: /sbin/mkswap /dev/sda3 -L "swapMX"
2021-11-02 03:27:52.068 DBG default: SOut #52: "Setting up swapspace version 1, size = 5.6 GiB (6039793664 bytes)\nLABEL=swapMX, UUID=6ebaaa24-177f-41c4-a4f3-5658721154b0\n"
2021-11-02 03:27:52.069 DBG default: SErr #52: "mkswap: /dev/sda3: warning: wiping old swap signature.\n"
2021-11-02 03:27:52.069 DBG default: Exit #52: 0 QProcess::NormalExit
2021-11-02 03:27:52.069 DBG default: << bool PartMan::mountPartitions() >>
2021-11-02 03:27:52.069 DBG default: ++ Mounting: /dev/sda2 ++
2021-11-02 03:27:52.080 DBG default: MkPath(SUCCESS): "/mnt/antiX/"
2021-11-02 03:27:52.080 DBG default: Exec #53: /bin/mount /dev/sda2 /mnt/antiX/ -o noatime
2021-11-02 03:27:52.155 DBG default: Exit #53: 0 QProcess::NormalExit
2021-11-02 03:27:52.155 DBG default: Exec #54: blkid -c /dev/null
2021-11-02 03:27:52.271 DBG default: SOut #54: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"8702-DE8F\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"50d7be26-538a-4577-8a4c-2e8132f5fd90\"\n/dev/sda2: LABEL=\"rootMX21\" UUID=\"1cff286a-8978-489b-812b-a71e2cb0a8cb\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"b7bdfa25-92dc-44dd-b6d3-e1d726f7c375\"\n/dev/sda3: LABEL=\"swapMX\" UUID=\"6ebaaa24-177f-41c4-a4f3-5658721154b0\" TYPE=\"swap\" PARTLABEL=\"primary\" PARTUUID=\"28a1deff-3786-4fc5-b389-40bdf62d05d8\"\n/dev/sdb1: BLOCK_SIZE=\"2048\" UUID=\"2021-10-26-00-31-12-00\" LABEL=\"MX-Live\" TYPE=\"iso9660\" PTUUID=\"103fdffb\" PTTYPE=\"dos\" PARTUUID=\"103fdffb-01\"\n/dev/sdb2: SEC_TYPE=\"msdos\" LABEL_FATBOOT=\"EFI-LIVE\" LABEL=\"EFI-LIVE\" UUID=\"7249-CF0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"103fdffb-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-11-02 03:27:52.271 DBG default: Exit #54: 0 QProcess::NormalExit
2021-11-02 03:27:52.272 DBG default: << bool MInstall::installLinux() >>
2021-11-02 03:27:52.272 DBG default: ++ Creating system directories ++
2021-11-02 03:27:52.281 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 03:27:52.281 DBG default: Exec #55: ps -e | grep 'udisksd'
2021-11-02 03:27:52.306 DBG default: SOut #55: "   6204 ?        00:00:00 udisksd\n"
2021-11-02 03:27:52.306 DBG default: Exit #55: 0 QProcess::NormalExit
2021-11-02 03:27:52.306 DBG default: Exec #56: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-11-02 03:27:52.319 DBG default: SErr #56: "grep: /lib/udev/rules.d: Is a directory\n"
2021-11-02 03:27:52.319 DBG default: Exit #56: 2 QProcess::NormalExit
2021-11-02 03:27:52.319 DBG default: Exec #57: rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-11-02 03:27:52.330 DBG default: Exit #57: 0 QProcess::NormalExit
2021-11-02 03:27:52.330 DBG default: Exec #58: udevadm control --reload
2021-11-02 03:27:52.351 DBG default: Exit #58: 0 QProcess::NormalExit
2021-11-02 03:27:52.351 DBG default: Exec #59: partprobe -s
2021-11-02 03:27:53.678 DBG default: SOut #59: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:27:53.678 DBG default: SErr #59: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.\n"
2021-11-02 03:27:53.678 DBG default: Exit #59: 1 QProcess::NormalExit
2021-11-02 03:27:53.685 DBG default: Sleep #1: 1000ms
2021-11-02 03:27:54.636 DBG default: Sleep #1: exit 0
2021-11-02 03:27:54.636 DBG default: << bool MInstall::copyLinux() >>
2021-11-02 03:27:54.641 DBG default: ++ Copying new system ++
2021-11-02 03:27:54.648 DBG default: Exec COPY: /bin/cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/libx32 /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX
2021-11-02 03:29:31.250 DBG default: Exit COPY: 0 QProcess::NormalExit
2021-11-02 03:29:31.250 DBG default: ++ Fixing configuration ++
2021-11-02 03:29:31.264 DBG default: Exec #60: /usr/sbin/live-to-installed /mnt/antiX
2021-11-02 03:29:31.441 DBG default: SErr #60: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/Installer.desktop\xE2\x80\x99: No such file or directory\nfind: \xE2\x80\x98/mnt/antiX/home/*//.idesktop/gazelle.lnk\xE2\x80\x99: No such file or directory\n"
2021-11-02 03:29:31.441 DBG default: Exit #60: 0 QProcess::NormalExit
2021-11-02 03:29:31.441 DBG default: Desktop menu
2021-11-02 03:29:31.441 DBG default: Exec #61: chroot /mnt/antiX desktop-menu --write-out-global
2021-11-02 03:29:31.460 DBG default: SErr #61: "chroot: failed to run command \xE2\x80\x98""desktop-menu\xE2\x80\x99: No such file or directory\n"
2021-11-02 03:29:31.460 DBG default: Exit #61: 127 QProcess::NormalExit
2021-11-02 03:29:31.460 DBG default: Creating fstab entry for: "/" "/dev/sda2"
2021-11-02 03:29:31.460 DBG default: Exec #62: blkid -o value UUID -s UUID /dev/sda2
2021-11-02 03:29:31.492 DBG default: Exit #62: 0 QProcess::NormalExit
2021-11-02 03:29:31.493 DBG default: Exec #63: blkid /dev/sda2 -o value -s TYPE
2021-11-02 03:29:31.507 DBG default: Exit #63: 0 QProcess::NormalExit
2021-11-02 03:29:31.507 DBG default: Creating fstab entry for: "SWAP" "/dev/sda3"
2021-11-02 03:29:31.507 DBG default: Exec #64: blkid -o value UUID -s UUID /dev/sda3
2021-11-02 03:29:31.542 DBG default: Exit #64: 0 QProcess::NormalExit
2021-11-02 03:29:31.542 DBG default: Exec #65: blkid /dev/sda3 -o value -s TYPE
2021-11-02 03:29:31.558 DBG default: Exit #65: 0 QProcess::NormalExit
2021-11-02 03:29:31.558 DBG default: Exec #66: blkid -o value UUID -s UUID /dev/sda1
2021-11-02 03:29:31.586 DBG default: Exit #66: 0 QProcess::NormalExit
2021-11-02 03:29:31.587 DBG default: espdev "/dev/sda1" "UUID=8702-DE8F"
2021-11-02 03:29:31.587 DBG default: Exec #67: /bin/rm -rf /mnt/antiX/home/demo
2021-11-02 03:29:31.631 DBG default: Exit #67: 0 QProcess::NormalExit
2021-11-02 03:29:31.631 DBG default: Exec #68: /bin/rm -rf /mnt/antiX/media/sd*
2021-11-02 03:29:31.645 DBG default: Exit #68: 0 QProcess::NormalExit
2021-11-02 03:29:31.645 DBG default: Exec #69: /bin/rm -rf /mnt/antiX/media/hd*
2021-11-02 03:29:31.657 DBG default: Exit #69: 0 QProcess::NormalExit
2021-11-02 03:29:31.657 DBG default: Exec #70: guess-hwclock
2021-11-02 03:29:32.985 DBG default: Exit #70: 0 QProcess::NormalExit
2021-11-02 03:29:32.985 DBG default: Exec #71: /bin/mount --rbind --make-rslave /dev /mnt/antiX/dev
2021-11-02 03:29:33.006 DBG default: Exit #71: 0 QProcess::NormalExit
2021-11-02 03:29:33.006 DBG default: Exec #72: chroot /mnt/antiX rm  /var/lib/dbus/machine-id /etc/machine-id
2021-11-02 03:29:33.053 DBG default: Exit #72: 0 QProcess::NormalExit
2021-11-02 03:29:33.053 DBG default: Exec #73: chroot /mnt/antiX dbus-uuidgen --ensure=/etc/machine-id
2021-11-02 03:29:33.105 DBG default: Exit #73: 0 QProcess::NormalExit
2021-11-02 03:29:33.106 DBG default: Exec #74: chroot /mnt/antiX dbus-uuidgen --ensure
2021-11-02 03:29:33.132 DBG default: Exit #74: 0 QProcess::NormalExit
2021-11-02 03:29:33.132 DBG default: Exec #75: /bin/umount -R /mnt/antiX/dev
2021-11-02 03:29:33.155 DBG default: Exit #75: 0 QProcess::NormalExit
2021-11-02 03:29:33.155 DBG default: ++ Paused for required operator input ++
2021-11-02 03:29:33.211 DBG default: ++ Setting system configuration ++
2021-11-02 03:29:33.221 DBG default: Exec #76: lspci -n | grep -qE '80ee:beef|80ee:cafe'
2021-11-02 03:29:33.275 DBG default: Exit #76: 1 QProcess::NormalExit
2021-11-02 03:29:33.275 DBG default: Exec #77: /bin/mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.296 DBG default: Exit #77: 1 QProcess::NormalExit
2021-11-02 03:29:33.296 DBG default: Exec #78: /bin/mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.311 DBG default: Exit #78: 1 QProcess::NormalExit
2021-11-02 03:29:33.311 DBG default: Exec #79: /bin/mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.327 DBG default: Exit #79: 1 QProcess::NormalExit
2021-11-02 03:29:33.327 DBG default: Exec #80: /bin/mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.342 DBG default: Exit #80: 1 QProcess::NormalExit
2021-11-02 03:29:33.342 DBG default: Exec #81: /bin/mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1
2021-11-02 03:29:33.357 DBG default: Exit #81: 1 QProcess::NormalExit
2021-11-02 03:29:33.357 DBG default: Set service: "anacron" true
2021-11-02 03:29:33.357 DBG default: Exec #82: chroot /mnt/antiX update-rc.d anacron defaults
2021-11-02 03:29:33.521 DBG default: Exit #82: 0 QProcess::NormalExit
2021-11-02 03:29:33.521 DBG default: Exec #83: chroot /mnt/antiX systemctl enable anacron
2021-11-02 03:29:33.702 DBG default: SErr #83: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2021-11-02 03:29:33.702 DBG default: Exit #83: 0 QProcess::NormalExit
2021-11-02 03:29:33.702 DBG default: Set service: "cron" true
2021-11-02 03:29:33.702 DBG default: Exec #84: chroot /mnt/antiX update-rc.d cron defaults
2021-11-02 03:29:33.783 DBG default: Exit #84: 0 QProcess::NormalExit
2021-11-02 03:29:33.784 DBG default: Exec #85: chroot /mnt/antiX systemctl enable cron
2021-11-02 03:29:33.943 DBG default: SErr #85: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2021-11-02 03:29:33.943 DBG default: Exit #85: 0 QProcess::NormalExit
2021-11-02 03:29:33.944 DBG default: Set service: "sudo" true
2021-11-02 03:29:33.944 DBG default: Exec #86: chroot /mnt/antiX update-rc.d sudo defaults
2021-11-02 03:29:34.027 DBG default: Exit #86: 0 QProcess::NormalExit
2021-11-02 03:29:34.027 DBG default: Exec #87: chroot /mnt/antiX systemctl enable sudo
2021-11-02 03:29:34.044 DBG default: SErr #87: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:34.044 DBG default: Exit #87: 1 QProcess::NormalExit
2021-11-02 03:29:34.044 DBG default: Set service: "cpufrequtils" true
2021-11-02 03:29:34.044 DBG default: Exec #88: chroot /mnt/antiX update-rc.d cpufrequtils defaults
2021-11-02 03:29:34.125 DBG default: Exit #88: 0 QProcess::NormalExit
2021-11-02 03:29:34.125 DBG default: Exec #89: chroot /mnt/antiX systemctl enable cpufrequtils
2021-11-02 03:29:34.283 DBG default: SErr #89: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2021-11-02 03:29:34.283 DBG default: Exit #89: 0 QProcess::NormalExit
2021-11-02 03:29:34.284 DBG default: Set service: "smartmontools" true
2021-11-02 03:29:34.284 DBG default: Exec #90: chroot /mnt/antiX update-rc.d smartmontools defaults
2021-11-02 03:29:34.365 DBG default: Exit #90: 0 QProcess::NormalExit
2021-11-02 03:29:34.365 DBG default: Exec #91: chroot /mnt/antiX systemctl enable smartmontools
2021-11-02 03:29:34.524 DBG default: SErr #91: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2021-11-02 03:29:34.524 DBG default: Exit #91: 0 QProcess::NormalExit
2021-11-02 03:29:34.524 DBG default: Set service: "acpid" true
2021-11-02 03:29:34.524 DBG default: Exec #92: chroot /mnt/antiX update-rc.d acpid defaults
2021-11-02 03:29:34.613 DBG default: Exit #92: 0 QProcess::NormalExit
2021-11-02 03:29:34.613 DBG default: Exec #93: chroot /mnt/antiX systemctl enable acpid
2021-11-02 03:29:34.776 DBG default: SErr #93: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\nCreated symlink /etc/systemd/system/multi-user.target.wants/acpid.service \xE2\x86\x92 /lib/systemd/system/acpid.service.\n"
2021-11-02 03:29:34.776 DBG default: Exit #93: 0 QProcess::NormalExit
2021-11-02 03:29:34.776 DBG default: Set service: "hddtemp" true
2021-11-02 03:29:34.776 DBG default: Exec #94: chroot /mnt/antiX update-rc.d hddtemp defaults
2021-11-02 03:29:34.859 DBG default: Exit #94: 0 QProcess::NormalExit
2021-11-02 03:29:34.859 DBG default: Exec #95: chroot /mnt/antiX systemctl enable hddtemp
2021-11-02 03:29:35.014 DBG default: SErr #95: "hddtemp.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable hddtemp\n"
2021-11-02 03:29:35.014 DBG default: Exit #95: 0 QProcess::NormalExit
2021-11-02 03:29:35.015 DBG default: Set service: "dbus" true
2021-11-02 03:29:35.015 DBG default: Exec #96: chroot /mnt/antiX update-rc.d dbus defaults
2021-11-02 03:29:35.097 DBG default: Exit #96: 0 QProcess::NormalExit
2021-11-02 03:29:35.097 DBG default: Exec #97: chroot /mnt/antiX systemctl enable dbus
2021-11-02 03:29:35.257 DBG default: SErr #97: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n  .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n  a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n  D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n  instance name specified.\n"
2021-11-02 03:29:35.257 DBG default: Exit #97: 0 QProcess::NormalExit
2021-11-02 03:29:35.257 DBG default: Set service: "saned" true
2021-11-02 03:29:35.257 DBG default: Exec #98: chroot /mnt/antiX update-rc.d saned defaults
2021-11-02 03:29:35.350 DBG default: Exit #98: 0 QProcess::NormalExit
2021-11-02 03:29:35.350 DBG default: Exec #99: chroot /mnt/antiX systemctl enable saned
2021-11-02 03:29:35.369 DBG default: SErr #99: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:35.369 DBG default: Exit #99: 1 QProcess::NormalExit
2021-11-02 03:29:35.369 DBG default: Set service: "haveged" true
2021-11-02 03:29:35.369 DBG default: Exec #100: chroot /mnt/antiX update-rc.d haveged defaults
2021-11-02 03:29:35.447 DBG default: Exit #100: 0 QProcess::NormalExit
2021-11-02 03:29:35.447 DBG default: Exec #101: chroot /mnt/antiX systemctl enable haveged
2021-11-02 03:29:35.607 DBG default: SErr #101: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2021-11-02 03:29:35.607 DBG default: Exit #101: 0 QProcess::NormalExit
2021-11-02 03:29:35.607 DBG default: Set service: "bluetooth" true
2021-11-02 03:29:35.607 DBG default: Exec #102: chroot /mnt/antiX update-rc.d bluetooth defaults
2021-11-02 03:29:35.688 DBG default: Exit #102: 0 QProcess::NormalExit
2021-11-02 03:29:35.688 DBG default: Exec #103: chroot /mnt/antiX systemctl enable bluetooth
2021-11-02 03:29:35.849 DBG default: SErr #103: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable bluetooth\n"
2021-11-02 03:29:35.849 DBG default: Exit #103: 0 QProcess::NormalExit
2021-11-02 03:29:35.849 DBG default: Set service: "rsync" true
2021-11-02 03:29:35.849 DBG default: Exec #104: chroot /mnt/antiX update-rc.d rsync defaults
2021-11-02 03:29:35.931 DBG default: Exit #104: 0 QProcess::NormalExit
2021-11-02 03:29:35.931 DBG default: Exec #105: chroot /mnt/antiX systemctl enable rsync
2021-11-02 03:29:36.089 DBG default: SErr #105: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\n"
2021-11-02 03:29:36.089 DBG default: Exit #105: 0 QProcess::NormalExit
2021-11-02 03:29:36.089 DBG default: Set service: "cups" true
2021-11-02 03:29:36.089 DBG default: Exec #106: chroot /mnt/antiX update-rc.d cups defaults
2021-11-02 03:29:36.173 DBG default: Exit #106: 0 QProcess::NormalExit
2021-11-02 03:29:36.173 DBG default: Exec #107: chroot /mnt/antiX systemctl enable cups
2021-11-02 03:29:36.330 DBG default: SErr #107: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cups\n"
2021-11-02 03:29:36.331 DBG default: Exit #107: 0 QProcess::NormalExit
2021-11-02 03:29:36.331 DBG default: Exec #108: sed -i 's/WORKGROUP/Workgroup/g' /mnt/antiX/etc/samba/smb.conf
2021-11-02 03:29:36.349 DBG default: Exit #108: 0 QProcess::NormalExit
2021-11-02 03:29:36.350 DBG default: Set service: "smbd" true
2021-11-02 03:29:36.350 DBG default: Exec #109: chroot /mnt/antiX update-rc.d smbd defaults
2021-11-02 03:29:36.431 DBG default: Exit #109: 0 QProcess::NormalExit
2021-11-02 03:29:36.431 DBG default: Exec #110: chroot /mnt/antiX systemctl enable smbd
2021-11-02 03:29:36.596 DBG default: SErr #110: "Synchronizing state of smbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smbd\n"
2021-11-02 03:29:36.596 DBG default: Exit #110: 0 QProcess::NormalExit
2021-11-02 03:29:36.596 DBG default: Set service: "nmbd" true
2021-11-02 03:29:36.596 DBG default: Exec #111: chroot /mnt/antiX update-rc.d nmbd defaults
2021-11-02 03:29:36.696 DBG default: Exit #111: 0 QProcess::NormalExit
2021-11-02 03:29:36.696 DBG default: Exec #112: chroot /mnt/antiX systemctl enable nmbd
2021-11-02 03:29:36.858 DBG default: SErr #112: "Synchronizing state of nmbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable nmbd\n"
2021-11-02 03:29:36.859 DBG default: Exit #112: 0 QProcess::NormalExit
2021-11-02 03:29:36.859 DBG default: Set service: "samba-ad-dc" true
2021-11-02 03:29:36.859 DBG default: Exec #113: chroot /mnt/antiX update-rc.d samba-ad-dc defaults
2021-11-02 03:29:36.948 DBG default: Exit #113: 0 QProcess::NormalExit
2021-11-02 03:29:36.948 DBG default: Exec #114: chroot /mnt/antiX systemctl enable samba-ad-dc
2021-11-02 03:29:36.966 DBG default: SErr #114: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:36.966 DBG default: Exit #114: 1 QProcess::NormalExit
2021-11-02 03:29:36.966 DBG default: Exec #115: sed -i 's/'"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')"'/Alex-ProBook/' /mnt/antiX/etc/hosts
2021-11-02 03:29:37.016 DBG default: Exit #115: 0 QProcess::NormalExit
2021-11-02 03:29:37.017 DBG default: Exec #116: echo "Alex-ProBook" | cat > /mnt/antiX/etc/hostname
2021-11-02 03:29:37.034 DBG default: Exit #116: 0 QProcess::NormalExit
2021-11-02 03:29:37.034 DBG default: Exec #117: echo "Alex-ProBook" | cat > /mnt/antiX/etc/mailname
2021-11-02 03:29:37.049 DBG default: Exit #117: 0 QProcess::NormalExit
2021-11-02 03:29:37.049 DBG default: Exec #118: sed -i 's/.*send host-name.*/send host-name "Alex-ProBook";/g' /mnt/antiX/etc/dhcp/dhclient.conf
2021-11-02 03:29:37.066 DBG default: Exit #118: 0 QProcess::NormalExit
2021-11-02 03:29:37.066 DBG default: Exec #119: echo "Alex-ProBook" | cat > /mnt/antiX/etc/defaultdomain
2021-11-02 03:29:37.083 DBG default: Exit #119: 0 QProcess::NormalExit
2021-11-02 03:29:37.083 DBG default: << void MInstall::setLocale() >>
2021-11-02 03:29:37.083 DBG default: Update locale
2021-11-02 03:29:37.083 DBG default: Exec #120: chroot /mnt/antiX /usr/sbin/update-locale "LANG=de_DE.UTF-8"
2021-11-02 03:29:37.139 DBG default: Exit #120: 0 QProcess::NormalExit
2021-11-02 03:29:37.139 DBG default: Exec #121: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /mnt/antiX/etc/localtime
2021-11-02 03:29:37.162 DBG default: Exit #121: 0 QProcess::NormalExit
2021-11-02 03:29:37.162 DBG default: Exec #122: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /etc/localtime
2021-11-02 08:29:37.180 DBG default: Exit #122: 0 QProcess::NormalExit
2021-11-02 08:29:37.180 DBG default: Exec #123: echo Europe/Berlin > /mnt/antiX/etc/timezone
2021-11-02 08:29:37.195 DBG default: Exit #123: 0 QProcess::NormalExit
2021-11-02 08:29:37.195 DBG default: Exec #124: echo Europe/Berlin > /etc/timezone
2021-11-02 08:29:37.212 DBG default: Exit #124: 0 QProcess::NormalExit
2021-11-02 08:29:37.212 DBG default: Exec #125: echo '0.0 0 0.0
0
UTC' > /etc/adjtime
2021-11-02 08:29:37.227 DBG default: Exit #125: 0 QProcess::NormalExit
2021-11-02 08:29:37.227 DBG default: Exec #126: hwclock --hctosys
2021-11-02 08:29:38.000 DBG default: Exit #126: 0 QProcess::NormalExit
2021-11-02 08:29:38.001 DBG default: Exec #127: /bin/cp -f /etc/adjtime /mnt/antiX/etc/
2021-11-02 08:29:38.019 DBG default: Exit #127: 0 QProcess::NormalExit
2021-11-02 08:29:38.019 DBG default: Exec #128: /bin/cp -f /etc/default/rcS /mnt/antiX/etc/default
2021-11-02 08:29:38.038 DBG default: Exit #128: 0 QProcess::NormalExit
2021-11-02 08:29:38.038 DBG default: Exec #129: sed -i '/data0=/c\data0=%H:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2021-11-02 08:29:38.055 DBG default: SErr #129: "sed: can't read /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2021-11-02 08:29:38.055 DBG default: Exit #129: 2 QProcess::NormalExit
2021-11-02 08:29:38.055 DBG default: Exec #130: sed -i '/data0=/c\data0=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2021-11-02 08:29:38.071 DBG default: SErr #130: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2021-11-02 08:29:38.071 DBG default: Exit #130: 2 QProcess::NormalExit
2021-11-02 08:29:38.072 DBG default: Exec #131: sed -i '/time_format=/c\time_format=%H:%M' /home/demo/.config/xfce4/panel/datetime-1.rc
2021-11-02 08:29:38.089 DBG default: Exit #131: 0 QProcess::NormalExit
2021-11-02 08:29:38.089 DBG default: Exec #132: sed -i '/time_format=/c\time_format=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc
2021-11-02 08:29:38.125 DBG default: Exit #132: 0 QProcess::NormalExit
2021-11-02 08:29:38.125 DBG default: Exec #133: sed -i '/use24hFormat=/c\use24hFormat=2' /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc
2021-11-02 08:29:38.145 DBG default: SErr #133: "sed: can't read /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2021-11-02 08:29:38.145 DBG default: Exit #133: 2 QProcess::NormalExit
2021-11-02 08:29:38.145 DBG default: Exec #134: sed -i '/use24hFormat=/c\use24hFormat=2' /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc
2021-11-02 08:29:38.162 DBG default: SErr #134: "sed: can't read /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2021-11-02 08:29:38.163 DBG default: Exit #134: 2 QProcess::NormalExit
2021-11-02 08:29:38.163 DBG default: Exec #135: sed -i 's/%H:%M/%H:%M/g' /mnt/antiX/etc/skel/.icewm/preferences
2021-11-02 08:29:38.180 DBG default: SErr #135: "sed: can't read /mnt/antiX/etc/skel/.icewm/preferences: No such file or directory\n"
2021-11-02 08:29:38.180 DBG default: Exit #135: 2 QProcess::NormalExit
2021-11-02 08:29:38.180 DBG default: Exec #136: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.fluxbox/init
2021-11-02 08:29:38.197 DBG default: SErr #136: "sed: can't read /mnt/antiX/etc/skel/.fluxbox/init: No such file or directory\n"
2021-11-02 08:29:38.197 DBG default: Exit #136: 2 QProcess::NormalExit
2021-11-02 08:29:38.197 DBG default: Exec #137: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.jwm/tray
2021-11-02 08:29:38.223 DBG default: SErr #137: "sed: can't read /mnt/antiX/etc/skel/.jwm/tray: No such file or directory\n"
2021-11-02 08:29:38.223 DBG default: Exit #137: 2 QProcess::NormalExit
2021-11-02 08:29:38.223 DBG default: Localize repo
2021-11-02 08:29:38.223 DBG default: Exec #138: chroot /mnt/antiX localize-repo default
2021-11-02 08:29:38.329 DBG default: SOut #138: "File: mx.list\n"
2021-11-02 08:29:38.329 DBG default: Exit #138: 0 QProcess::NormalExit
2021-11-02 08:29:38.329 DBG default: Exec #139: chroot /mnt/antiX chpasswd
2021-11-02 08:29:38.477 DBG default: Exit #139: 0 QProcess::NormalExit
2021-11-02 08:29:38.477 DBG default: Exec #140: /bin/cp -a /mnt/antiX/etc/skel /mnt/antiX/home/Alex
2021-11-02 08:29:39.111 DBG default: Exit #140: 0 QProcess::NormalExit
2021-11-02 08:29:39.111 DBG default: Exec #141: chown -R demo:demo /mnt/antiX/home/Alex
2021-11-02 08:29:39.139 DBG default: Exit #141: 0 QProcess::NormalExit
2021-11-02 08:29:39.139 DBG default: Exec #142: sed -i 's/demo/Alex/g' /mnt/antiX/etc/group
2021-11-02 08:29:39.159 DBG default: Exit #142: 0 QProcess::NormalExit
2021-11-02 08:29:39.159 DBG default: Exec #143: sed -i 's/demo/Alex/g' /mnt/antiX/etc/gshadow
2021-11-02 08:29:39.179 DBG default: Exit #143: 0 QProcess::NormalExit
2021-11-02 08:29:39.179 DBG default: Exec #144: sed -i 's/demo/Alex/g' /mnt/antiX/etc/passwd
2021-11-02 08:29:39.198 DBG default: Exit #144: 0 QProcess::NormalExit
2021-11-02 08:29:39.198 DBG default: Exec #145: sed -i 's/demo/Alex/g' /mnt/antiX/etc/shadow
2021-11-02 08:29:39.217 DBG default: Exit #145: 0 QProcess::NormalExit
2021-11-02 08:29:39.218 DBG default: Exec #146: sed -i 's/demo/Alex/g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.236 DBG default: SErr #146: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.236 DBG default: Exit #146: 2 QProcess::NormalExit
2021-11-02 08:29:39.236 DBG default: Exec #147: sed -i 's/demo/Alex/g' /mnt/antiX/etc/lightdm/lightdm.conf
2021-11-02 08:29:39.255 DBG default: Exit #147: 0 QProcess::NormalExit
2021-11-02 08:29:39.255 DBG default: Exec #148: sed -i 's/demo/Alex/g' /mnt/antiX/home/*/.gtkrc-2.0
2021-11-02 08:29:39.273 DBG default: SErr #148: "sed: can't read /mnt/antiX/home/*/.gtkrc-2.0: No such file or directory\n"
2021-11-02 08:29:39.273 DBG default: Exit #148: 2 QProcess::NormalExit
2021-11-02 08:29:39.273 DBG default: Exec #149: sed -i 's/demo/Alex/g' /mnt/antiX/root/.gtkrc-2.0
2021-11-02 08:29:39.291 DBG default: SErr #149: "sed: can't read /mnt/antiX/root/.gtkrc-2.0: No such file or directory\n"
2021-11-02 08:29:39.291 DBG default: Exit #149: 2 QProcess::NormalExit
2021-11-02 08:29:39.291 DBG default: Exec #150: sed -i 's/auto_login/#auto_login/g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.308 DBG default: SErr #150: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.308 DBG default: Exit #150: 2 QProcess::NormalExit
2021-11-02 08:29:39.308 DBG default: Exec #151: sed -i 's/default_user /#default_user /g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.326 DBG default: SErr #151: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.327 DBG default: Exit #151: 2 QProcess::NormalExit
2021-11-02 08:29:39.327 DBG default: Exec #152: sed -i 's/autologin-user=/#autologin-user=/g' /mnt/antiX/etc/lightdm/lightdm.conf
2021-11-02 08:29:39.345 DBG default: Exit #152: 0 QProcess::NormalExit
2021-11-02 08:29:39.345 DBG default: Exec #153: sed -i 's/User=.*/User=/g' /mnt/antiX/etc/sddm.conf
2021-11-02 08:29:39.362 DBG default: SErr #153: "sed: can't read /mnt/antiX/etc/sddm.conf: No such file or directory\n"
2021-11-02 08:29:39.362 DBG default: Exit #153: 2 QProcess::NormalExit
2021-11-02 08:29:39.362 DBG default: Exec #154: touch /mnt/antiX/var/mail/Alex
2021-11-02 08:29:39.380 DBG default: Exit #154: 0 QProcess::NormalExit
2021-11-02 08:29:39.393 DBG default: Configuration: /mnt/antiX/etc/minstall.conf
2021-11-02 08:29:39.393 DBG default:  - Product: MX Linux 21
2021-11-02 08:29:39.393 DBG default:  - Version: 21.10.14
2021-11-02 08:29:39.393 DBG default:  = GRUB:
2021-11-02 08:29:39.393 DBG default:    - Install: false
2021-11-02 08:29:39.393 DBG default:    - Location: sda1
2021-11-02 08:29:39.393 DBG default:    - TargetType: ESP
2021-11-02 08:29:39.393 DBG default:  = Localization:
2021-11-02 08:29:39.393 DBG default:    - ClockHours: 24
2021-11-02 08:29:39.393 DBG default:    - LocalClock: false
2021-11-02 08:29:39.393 DBG default:    - Locale: de_DE.UTF-8
2021-11-02 08:29:39.393 DBG default:    - Timezone: Europe/Berlin
2021-11-02 08:29:39.394 DBG default:  = Network:
2021-11-02 08:29:39.394 DBG default:    - ComputerName: Alex-ProBook
2021-11-02 08:29:39.394 DBG default:    - Domain: example.dom
2021-11-02 08:29:39.394 DBG default:    - Samba: true
2021-11-02 08:29:39.394 DBG default:    - Workgroup: Workgroup
2021-11-02 08:29:39.394 DBG default:  = Services:
2021-11-02 08:29:39.394 DBG default:    - acpid: true
2021-11-02 08:29:39.394 DBG default:    - anacron: true
2021-11-02 08:29:39.394 DBG default:    - bluetooth: true
2021-11-02 08:29:39.394 DBG default:    - cpufrequtils: true
2021-11-02 08:29:39.394 DBG default:    - cron: true
2021-11-02 08:29:39.394 DBG default:    - cups: true
2021-11-02 08:29:39.394 DBG default:    - dbus: true
2021-11-02 08:29:39.394 DBG default:    - haveged: true
2021-11-02 08:29:39.394 DBG default:    - hddtemp: true
2021-11-02 08:29:39.394 DBG default:    - rsync: true
2021-11-02 08:29:39.394 DBG default:    - saned: true
2021-11-02 08:29:39.394 DBG default:    - smartmontools: true
2021-11-02 08:29:39.395 DBG default:    - sudo: true
2021-11-02 08:29:39.395 DBG default:  = Storage:
2021-11-02 08:29:39.395 DBG default:    - Drive: sda
2021-11-02 08:29:39.395 DBG default:    - DriveEncrypt: false
2021-11-02 08:29:39.395 DBG default:    - RootPortion: 100
2021-11-02 08:29:39.395 DBG default:    - Target: Drive
2021-11-02 08:29:39.395 DBG default:  = User:
2021-11-02 08:29:39.395 DBG default:    - Autologin: false
2021-11-02 08:29:39.395 DBG default:    - EnableRoot: true
2021-11-02 08:29:39.395 DBG default:    - SaveDesktop: false
2021-11-02 08:29:39.395 DBG default:    - Username: Alex
2021-11-02 08:29:39.395 DBG default: End of configuration.
2021-11-02 08:29:39.395 DBG default: Exec #155: /bin/sync
2021-11-02 08:29:39.799 DBG default: Exit #155: 0 QProcess::NormalExit
2021-11-02 08:29:39.800 DBG default: << bool MInstall::installLoader() >>
2021-11-02 08:29:39.811 DBG default: Exec #156: /bin/ls /mnt/antiX/boot | grep 'initrd.img-3.6'
2021-11-02 08:29:39.831 DBG default: Exit #156: 1 QProcess::NormalExit
2021-11-02 08:29:39.832 DBG default: Exec #157: /bin/mount -t efivarfs efivarfs /sys/firmware/efi/efivars
2021-11-02 08:29:39.848 DBG default: SErr #157: "mount: /sys/firmware/efi/efivars: efivarfs already mounted on /sys/firmware/efi/efivars.\n"
2021-11-02 08:29:39.849 DBG default: Exit #157: 32 QProcess::NormalExit
2021-11-02 08:29:39.849 DBG default: ++ Updating initramfs ++
2021-11-02 08:29:39.859 DBG default: Update initramfs
2021-11-02 08:29:39.859 DBG default: Exec #158: chroot /mnt/antiX update-initramfs -u -t -k all
2021-11-02 08:30:20.341 DBG default: SOut #158: "update-initramfs: Generating /boot/initrd.img-5.14.0-3mx-amd64\n"
2021-11-02 08:30:20.342 DBG default: SErr #158: "grep: /proc/cpuinfo: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ncryptsetup: WARNING: Couldn't determine root device\nsed: can't read /proc/cmdline: No such file or directory\ngrep: /proc/swaps: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ngrep: /proc/cpuinfo: No such file or directory\nW: Couldn't identify type of root file system for fsck hook\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
2021-11-02 08:30:20.342 DBG default: Exit #158: 0 QProcess::NormalExit
2021-11-02 08:30:20.351 DBG default: ++ Cleaning up ++
2021-11-02 08:30:20.363 DBG default: << void MInstall::cleanup(bool) >>
2021-11-02 08:30:20.363 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 08:30:20.363 DBG default: Exec #159: /bin/cp /var/log/minstall.log /mnt/antiX/var/log >/dev/null 2>&1
This might be the problem

Code: Select all

2021-11-02 08:30:20.342 DBG default: SErr #158: "grep: /proc/cpuinfo: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ncryptsetup: WARNING: Couldn't determine root device\nsed: can't read /proc/cmdline: No such file or directory\ngrep: /proc/swaps: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ngrep: /proc/cpuinfo: No such file or directory\nW: Couldn't identify type of root file system for fsck hook\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
*updated*
I tried to install the Xfce Version and it did not work. Then i tried ahs version with legacy enabled and i got the same error.[/spoiler]
Last edited by Alex on Tue Nov 02, 2021 8:55 am, edited 1 time in total.
Top
User avatar
j2mcgreg
Global Moderator
Posts: 6920
Joined: Tue Oct 23, 2007 12:04 pm

Re: MX-21 "ahs" (Xfce) RC3 feedback

#38 Post by j2mcgreg »

Alex wrote:
I'm currently trying to run MX-21_ahs_rc3_x64 Wildflower October 25, 2021. I previously installed Fluxbox and KDE from USB Live System and both worked fine. Now I tried the same with the Xfce Version and it does not boot. When i install GRUB, boot from Live USB, select Rescue and Grub i can find a Grub Menu on my drive and can boot, but without installing grub it just says "No Boot Device Found".

As i stated i tried different Versions and also changed BIOS settings, so i cannot say which settings specifically worked previously. For the latest installation i had Legacy and Secure Boot disabled and Fastboot disabled. I did not install grub this time to see if it works but it does not.

Currently I am downloading the Xfce Version without ahs and will try that.
I have a Probook that dates from 2017 and there are just three things that you have to do to install MX:

-- disable secure boot

-- disable fast boot

-- select 'use GPT Partitioning' when preparing the usb drive

Also in terms of the bios version on my machine "Legacy" means that you can roll back to Win 7. It does not mean that you can do an MBR based install.

Finally, when I do the initial install of a new version of MX (like MX 21), I always select the "automatically install using entire disk" option rather than custom partitioning. I don't see the point in complicating things on the first go round.
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.
Top
User avatar
dolphin_oracle
Developer
Posts: 22343
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-21 "ahs" (Xfce) RC3 feedback

#39 Post by dolphin_oracle »

Alex wrote: Tue Nov 02, 2021 5:15 am No Boot Device Found *updated*

I'm currently trying to run MX-21_ahs_rc3_x64 Wildflower October 25, 2021. I previously installed Fluxbox and KDE from USB Live System and both worked fine. Now I tried the same with the Xfce Version and it does not boot. When i install GRUB, boot from Live USB, select Rescue and Grub i can find a Grub Menu on my drive and can boot, but without installing grub it just says "No Boot Device Found".

As i stated i tried different Versions and also changed BIOS settings, so i cannot say which settings specifically worked previously. For the latest installation i had Legacy and Secure Boot disabled and Fastboot disabled. I did not install grub this time to see if it works but it does not.

Currently I am downloading the Xfce Version without ahs and will try that.

My System Information

Code: Select all

System:    Host: <filter> Kernel: 5.14.0-3mx-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_ahs_rc3_x64 Wildflower October 25  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: HP product: HP ProBook 455 G4 v: N/A serial: <filter> Chassis: 
           type: 10 serial: <filter> 
           Mobo: HP model: 823E v: KBC Version 37.28 serial: <filter> UEFI: HP v: P84 Ver. 01.01 
           date: 08/18/2016 
Battery:   ID-1: BAT0 charge: 26.5 Wh condition: 34.7/34.7 Wh (100%) volts: 11.4/11.4 
           model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Discharging 
CPU:       Topology: Dual Core model: AMD A6-9210 RADEON R4 5 COMPUTE CORES 2C+3G bits: 64 
           type: MCP arch: Excavator family: 15 (21) model-id: 70 (112) stepping: N/A 
           microcode: 6006704 L2 cache: 1024 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 9581 
           Speed: 1296 MHz min/max: 1300/2400 MHz boost: enabled Core speeds (MHz): 1: 1297 
           2: 1297 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full AMD retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: AMD Stoney [Radeon R2/R3/R4/R5 Graphics] vendor: Hewlett-Packard 
           driver: amdgpu v: kernel bus ID: 00:01.0 chip ID: 1002:98e4 
           Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati 
           unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz 
           OpenGL: renderer: AMD STONEY (DRM 3.42.0 5.14.0-3mx-amd64 LLVM 12.0.1) 
           v: 4.5 Mesa 21.2.3 direct render: Yes 
Audio:     Device-1: AMD vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:01.1 
           chip ID: 1002:15b3 
           Device-2: AMD Family 15h Audio vendor: Hewlett-Packard driver: snd_hda_intel 
           v: kernel bus ID: 00:09.2 chip ID: 1022:157a 
           Sound Server: ALSA v: k5.14.0-3mx-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 01:00.0 
           chip ID: 10ec:8168 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel port: 2000 bus ID: 02:00.0 
           chip ID: 8086:095a 
           IF: wlan0 state: down mac: <filter> 
Drives:    Local Storage: total: 140.44 GiB used: 21.3 MiB (0.0%) 
           ID-1: /dev/sda vendor: SanDisk model: SSD PLUS 120GB size: 111.80 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 00RL scheme: GPT 
           ID-2: /dev/sdb type: USB vendor: SanDisk model: Ultra size: 28.64 GiB block size: 
           physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR 
Partition: ID-1: / raw size: N/A size: 2.90 GiB used: 21.3 MiB (0.7%) fs: overlay 
           source: ERR-102 
           ID-2: swap-1 size: 5.62 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 56.0 C mobo: 0.0 C gpu: amdgpu temp: 56 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
           2: deb http://mxrepo.com/mx/repo/ bullseye ahs
Info:      Processes: 202 Uptime: N/A Memory: 3.70 GiB used: 787.8 MiB (20.8%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36
Install Log (WARNING: Couldn't determine root device\nsed -> one of the last lines)

Code: Select all

2021-11-02 03:26:53.417 DBG default: Installer version: 21.10.14
2021-11-02 03:26:53.659 DBG default: << void MInstall::startup() >>
2021-11-02 03:26:53.660 DBG default: check for remastered home demo folder: false
2021-11-02 03:26:53.660 DBG default: Exec #1: du -sb /live/aufs/boot
2021-11-02 03:26:53.746 DBG default: Exit #1: 0 QProcess::NormalExit
2021-11-02 03:26:53.746 DBG default: linuxfs file is at :  "/live/boot-dev/antiX/linuxfs"
2021-11-02 03:26:53.746 DBG default: Exec #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2021-11-02 03:26:53.760 DBG default: Exit #2: 0 QProcess::NormalExit
2021-11-02 03:26:53.761 DBG default: linuxfs compression type is  "6" compression factor is  25
2021-11-02 03:26:53.761 DBG default: Exec #3: df /live/linux --output=used --total |tail -n1
2021-11-02 03:26:53.771 DBG default: Exit #3: 0 QProcess::NormalExit
2021-11-02 03:26:53.772 DBG default: linuxfs file size is  7366246400  rootfs file size is  0
2021-11-02 03:26:53.772 DBG default: Minimum space: 268435456 (boot), 8439988224 (root)
2021-11-02 03:26:53.772 DBG default: Exec #4: uname -m | grep -q i686
2021-11-02 03:26:53.782 DBG default: Exit #4: 1 QProcess::NormalExit
2021-11-02 03:26:53.782 DBG default: uefi = true
2021-11-02 03:26:53.782 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 03:26:53.782 DBG default: Exec #5: ps -e | grep 'udisksd'
2021-11-02 03:26:53.808 DBG default: SOut #5: "   6204 ?        00:00:00 udisksd\n"
2021-11-02 03:26:53.808 DBG default: Exit #5: 0 QProcess::NormalExit
2021-11-02 03:26:53.808 DBG default: Exec #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-11-02 03:26:53.828 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2021-11-02 03:26:53.828 DBG default: Exit #6: 2 QProcess::NormalExit
2021-11-02 03:26:53.828 DBG default: Exec #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2021-11-02 03:26:53.844 DBG default: Exit #7: 1 QProcess::NormalExit
2021-11-02 03:26:53.845 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2021-11-02 03:26:53.845 DBG default: Exec #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-11-02 03:26:53.852 DBG default: Exit #8: 0 QProcess::NormalExit
2021-11-02 03:26:53.852 DBG default: Exec #9: udevadm control --reload
2021-11-02 03:26:53.893 DBG default: Exit #9: 0 QProcess::NormalExit
2021-11-02 03:26:53.893 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2021-11-02 03:26:53.908 DBG default: Exit #10: 0 QProcess::NormalExit
2021-11-02 03:26:53.908 DBG default: Exec #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2021-11-02 03:26:53.921 DBG default: Exit #11: 1 QProcess::NormalExit
2021-11-02 03:26:53.921 DBG default: check for possible snapshot: false
2021-11-02 03:26:54.071 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2021-11-02 03:26:54.085 DBG default: Exit #12: 0 QProcess::NormalExit
2021-11-02 03:26:54.088 DBG default: Exec #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2021-11-02 03:26:54.106 DBG default: Exit #13: 0 QProcess::NormalExit
2021-11-02 03:26:54.107 DBG default: Exec #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2021-11-02 03:26:54.207 DBG default: Exit #14: 1 QProcess::NormalExit
2021-11-02 03:26:54.207 DBG default: Exec #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2021-11-02 03:26:54.248 DBG default: Exit #15: 0 QProcess::NormalExit
2021-11-02 03:26:54.254 DBG default: << void MInstall::updatePartitionWidgets(bool) >>
2021-11-02 03:26:54.254 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-11-02 03:26:54.270 DBG default: Exit #16: 0 QProcess::NormalExit
2021-11-02 03:26:54.270 DBG default: Exec #17: partprobe -s
2021-11-02 03:26:55.599 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:26:55.599 DBG default: SErr #17: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.\n"
2021-11-02 03:26:55.599 DBG default: Exit #17: 1 QProcess::NormalExit
2021-11-02 03:26:55.599 DBG default: Exec #18: blkid -c /dev/null
2021-11-02 03:26:55.709 DBG default: SOut #18: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"5983-8B16\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"24102219-523e-4445-bcfe-9983da03b775\"\n/dev/sda2: LABEL=\"rootMX21\" UUID=\"5ec45faf-3fbd-4209-8444-616d35dd84ad\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"2f508784-8ce8-4d30-968a-bb47aa5a3b27\"\n/dev/sda3: LABEL=\"swapMX\" UUID=\"7bcef7db-366f-4a28-983b-abbcd3e93554\" TYPE=\"swap\" PARTLABEL=\"primary\" PARTUUID=\"24717057-588d-42d3-8d90-59150c78f5b9\"\n/dev/sdb1: BLOCK_SIZE=\"2048\" UUID=\"2021-10-26-00-31-12-00\" LABEL=\"MX-Live\" TYPE=\"iso9660\" PTUUID=\"103fdffb\" PTTYPE=\"dos\" PARTUUID=\"103fdffb-01\"\n/dev/sdb2: SEC_TYPE=\"msdos\" LABEL_FATBOOT=\"EFI-LIVE\" LABEL=\"EFI-LIVE\" UUID=\"7249-CF0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"103fdffb-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-11-02 03:26:55.709 DBG default: Exit #18: 0 QProcess::NormalExit
2021-11-02 03:26:55.709 DBG default: Exec #19: parted -lm
2021-11-02 03:26:55.940 DBG default: Exit #19: 0 QProcess::NormalExit
2021-11-02 03:26:55.941 DBG default: Exec #20: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-11-02 03:26:55.962 DBG default: Exit #20: 32 QProcess::NormalExit
2021-11-02 03:27:00.531 DBG default: Exec #21: command -v  system-keyboard-qt >/dev/null 2>&1
2021-11-02 03:27:00.571 DBG default: Exit #21: 0 QProcess::NormalExit
2021-11-02 03:27:00.571 DBG default: Exec #22: system-keyboard-qt
2021-11-02 03:27:20.854 DBG default: SErr #22: "\n(system-keyboard-qt:6497): Gtk-WARNING **: 03:27:00.638: Unable to locate theme engine in module_path: \"clearlooks\",\n\n(system-keyboard-qt:6497): Gtk-WARNING **: 03:27:00.639: Unable to locate theme engine in module_path: \"clearlooks\",\n\"BACKSPACE\" = \"guess\"\n\"XKBLAYOUT\" = \"us\"\n\"XKBMODEL\" = \"pc105\"\n\"XKBOPTIONS\" = \"grp:rctrl_rshift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll\"\n\"XKBVARIANT\" = \"\"\nqt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 912, resource id: 18879146, major code: 40 (TranslateCoords), minor code: 0\n\"# KEYBOARD CONFIGURATION FILE\\n\\n# Consult the keyboard(5) manual page.\\n\\nXKBMODEL=\\\"pc105\\\"\\nXKBLAYOUT=\\\"de\\\"\\nXKBVARIANT=\\\"\\\"\\nXKBOPTIONS=\\\"grp:rctrl_rshift_toggle,grp_led:scroll,terminate:ctrl_alt_bksp\\\"\\n\\nBACKSPACE=\\\"guess\\\"\\n\"\n"
2021-11-02 03:27:20.854 DBG default: Exit #22: 0 QProcess::NormalExit
2021-11-02 03:27:41.221 DBG default: Mount points:
2021-11-02 03:27:41.221 DBG default:  - "/" - "sda2" "sda2" "/dev/sda2"
2021-11-02 03:27:41.221 DBG default:  - "SWAP" - "sda3" "sda3" "/dev/sda3"
2021-11-02 03:27:41.241 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1260, resource id: 18881660, major code: 40 (TranslateCoords), minor code: 0
2021-11-02 03:27:41.314 DBG default: ++ Preparing to install MX Linux ++
2021-11-02 03:27:41.319 DBG default: Exec #23: smartctl -H /dev/sda
2021-11-02 03:27:41.864 DBG default: SOut #23: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2021-11-02 03:27:41.864 DBG default: Exit #23: 0 QProcess::NormalExit
2021-11-02 03:27:41.864 DBG default: Exec #24: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2021-11-02 03:27:41.912 DBG default: Exit #24: 0 QProcess::NormalExit
2021-11-02 03:27:41.913 DBG default: << void MInstall::cleanup(bool) >>
2021-11-02 03:27:41.913 DBG default: Exec #25: /bin/umount -l /mnt/antiX/boot/efi
2021-11-02 03:27:41.924 DBG default: SErr #25: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2021-11-02 03:27:41.924 DBG default: Exit #25: 32 QProcess::NormalExit
2021-11-02 03:27:41.924 DBG default: Exec #26: /bin/umount -l /mnt/antiX/proc
2021-11-02 03:27:41.934 DBG default: SErr #26: "umount: /mnt/antiX/proc: no mount point specified.\n"
2021-11-02 03:27:41.934 DBG default: Exit #26: 32 QProcess::NormalExit
2021-11-02 03:27:41.934 DBG default: Exec #27: /bin/umount -l /mnt/antiX/sys
2021-11-02 03:27:41.945 DBG default: SErr #27: "umount: /mnt/antiX/sys: no mount point specified.\n"
2021-11-02 03:27:41.945 DBG default: Exit #27: 32 QProcess::NormalExit
2021-11-02 03:27:41.945 DBG default: Exec #28: /bin/umount -l /mnt/antiX/dev/shm
2021-11-02 03:27:41.955 DBG default: SErr #28: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2021-11-02 03:27:41.955 DBG default: Exit #28: 32 QProcess::NormalExit
2021-11-02 03:27:41.955 DBG default: Exec #29: /bin/umount -l /mnt/antiX/dev
2021-11-02 03:27:41.964 DBG default: SErr #29: "umount: /mnt/antiX/dev: no mount point specified.\n"
2021-11-02 03:27:41.964 DBG default: Exit #29: 32 QProcess::NormalExit
2021-11-02 03:27:41.964 DBG default: Exec #30: swapoff /dev/sda2
2021-11-02 03:27:41.977 DBG default: SErr #30: "swapoff: /dev/sda2: swapoff failed: Invalid argument\n"
2021-11-02 03:27:41.977 DBG default: Exit #30: 4 QProcess::NormalExit
2021-11-02 03:27:41.977 DBG default: Exec #31: /bin/umount -l /mnt/antiX/
2021-11-02 03:27:41.987 DBG default: SErr #31: "umount: /mnt/antiX/: no mount point specified.\n"
2021-11-02 03:27:41.988 DBG default: Exit #31: 32 QProcess::NormalExit
2021-11-02 03:27:41.988 DBG default: << bool PartMan::preparePartitions() >>
2021-11-02 03:27:41.988 DBG default: Exec #32: lsblk -nro name /dev/sda
2021-11-02 03:27:42.001 DBG default: Exit #32: 0 QProcess::NormalExit
2021-11-02 03:27:42.001 DBG default: Exec #33: swapoff /dev/sda
2021-11-02 03:27:42.011 DBG default: SErr #33: "swapoff: /dev/sda: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.011 DBG default: Exit #33: 4 QProcess::NormalExit
2021-11-02 03:27:42.011 DBG default: Exec #34: /bin/umount /dev/sda
2021-11-02 03:27:42.023 DBG default: SErr #34: "umount: /dev/sda: not mounted.\n"
2021-11-02 03:27:42.023 DBG default: Exit #34: 32 QProcess::NormalExit
2021-11-02 03:27:42.023 DBG default: Exec #35: swapoff /dev/sda2
2021-11-02 03:27:42.036 DBG default: SErr #35: "swapoff: /dev/sda2: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.036 DBG default: Exit #35: 4 QProcess::NormalExit
2021-11-02 03:27:42.036 DBG default: Exec #36: /bin/umount /dev/sda2
2021-11-02 03:27:42.051 DBG default: SErr #36: "umount: /dev/sda2: not mounted.\n"
2021-11-02 03:27:42.051 DBG default: Exit #36: 32 QProcess::NormalExit
2021-11-02 03:27:42.051 DBG default: Exec #37: swapoff /dev/sda3
2021-11-02 03:27:42.067 DBG default: Exit #37: 0 QProcess::NormalExit
2021-11-02 03:27:42.068 DBG default: Exec #38: /bin/umount /dev/sda3
2021-11-02 03:27:42.081 DBG default: SErr #38: "umount: /dev/sda3: not mounted.\n"
2021-11-02 03:27:42.081 DBG default: Exit #38: 32 QProcess::NormalExit
2021-11-02 03:27:42.081 DBG default: Exec #39: swapoff /dev/sda1
2021-11-02 03:27:42.092 DBG default: SErr #39: "swapoff: /dev/sda1: swapoff failed: Invalid argument\n"
2021-11-02 03:27:42.092 DBG default: Exit #39: 4 QProcess::NormalExit
2021-11-02 03:27:42.092 DBG default: Exec #40: /bin/umount /dev/sda1
2021-11-02 03:27:42.105 DBG default: SErr #40: "umount: /dev/sda1: not mounted.\n"
2021-11-02 03:27:42.105 DBG default: Exit #40: 32 QProcess::NormalExit
2021-11-02 03:27:42.105 DBG default: ++ Preparing partition tables ++
2021-11-02 03:27:42.110 DBG default: Exec #41: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda
2021-11-02 03:27:42.164 DBG default: SErr #41: "64+0 records in\n64+0 records out\n4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.0411501 s, 102 MB/s\n"
2021-11-02 03:27:42.164 DBG default: Exit #41: 0 QProcess::NormalExit
2021-11-02 03:27:42.164 DBG default: Exec #42: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda seek=1831617
2021-11-02 03:27:42.220 DBG default: SErr #42: "dd: error writing '/dev/sda': No space left on device\n64+0 records in\n63+0 records out\n4128768 bytes (4.1 MB, 3.9 MiB) copied, 0.0359852 s, 115 MB/s\n"
2021-11-02 03:27:42.220 DBG default: Exit #42: 1 QProcess::NormalExit
2021-11-02 03:27:42.220 DBG default: Exec #43: parted -s /dev/sda mklabel gpt
2021-11-02 03:27:42.281 DBG default: Exit #43: 0 QProcess::NormalExit
2021-11-02 03:27:42.281 DBG default: ++ Preparing required partitions ++
2021-11-02 03:27:42.291 DBG default: Exec #44: parted -s --align optimal /dev/sda mkpart primary 1MiB 257MiB
2021-11-02 03:27:42.370 DBG default: Exit #44: 0 QProcess::NormalExit
2021-11-02 03:27:42.376 DBG default: Exec #45: parted -s --align optimal /dev/sda mkpart primary 257MiB 108713MiB
2021-11-02 03:27:42.499 DBG default: Exit #45: 0 QProcess::NormalExit
2021-11-02 03:27:42.506 DBG default: Exec #46: parted -s --align optimal /dev/sda mkpart primary 108713MiB 114473MiB
2021-11-02 03:27:42.679 DBG default: Exit #46: 0 QProcess::NormalExit
2021-11-02 03:27:42.733 DBG default: Exec #47: partprobe -s
2021-11-02 03:27:44.153 DBG default: SOut #47: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:27:44.153 DBG default: SErr #47: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.\n"
2021-11-02 03:27:44.153 DBG default: Exit #47: 1 QProcess::NormalExit
2021-11-02 03:27:44.153 DBG default: << bool PartMan::formatPartitions() >>
2021-11-02 03:27:44.153 DBG default: ++ Formatting: EFI System Partition ++
2021-11-02 03:27:44.163 DBG default: Exec #48: mkfs.msdos -F 32 -n "EFI System" /dev/sda1
2021-11-02 03:27:44.424 DBG default: SOut #48: "mkfs.fat 4.2 (2021-01-31)\n"
2021-11-02 03:27:44.425 DBG default: SErr #48: "mkfs.fat: Warning: lowercase labels might not work properly on some systems\n"
2021-11-02 03:27:44.425 DBG default: Exit #48: 0 QProcess::NormalExit
2021-11-02 03:27:44.425 DBG default: Exec #49: parted -s /dev/sda set 1 esp on
2021-11-02 03:27:44.536 DBG default: Exit #49: 0 QProcess::NormalExit
2021-11-02 03:27:44.536 DBG default: ++ Formatting: / (root) ++
2021-11-02 03:27:44.543 DBG default: Exec #50: mkfs.ext4 -F /dev/sda2 -L "rootMX21"
2021-11-02 03:27:52.005 DBG default: SOut #50: "Discarding device blocks:     4096/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b 2625536/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b 5246976/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b11014144/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b15208448/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b20451328/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b26742784/27764736\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b                 \b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\bdone                            \nCreating filesystem with 27764736 4k blocks and 6946816 inodes\nFilesystem UUID: 1cff286a-8978-489b-812b-a71e2cb0a8cb\nSuperblock backups stored on blocks: \n\t32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, \n\t4096000, 7962624, 11239424, 20480000, 23887872\n\nAllocating group tables:   0/848\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nWriting inode tables:   0/848\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nCreating journal (131072 blocks): done\nWriting superblocks and filesystem accounting information:   0/848\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone\n\n"
2021-11-02 03:27:52.005 DBG default: SErr #50: "mke2fs 1.46.2 (28-Feb-2021)\n"
2021-11-02 03:27:52.005 DBG default: Exit #50: 0 QProcess::NormalExit
2021-11-02 03:27:52.005 DBG default: Exec #51: /sbin/tune2fs -c0 -C0 -i1m /dev/sda2
2021-11-02 03:27:52.032 DBG default: SOut #51: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2021-11-02 03:27:52.032 DBG default: Exit #51: 0 QProcess::NormalExit
2021-11-02 03:27:52.032 DBG default: ++ Formatting: swap space ++
2021-11-02 03:27:52.038 DBG default: Exec #52: /sbin/mkswap /dev/sda3 -L "swapMX"
2021-11-02 03:27:52.068 DBG default: SOut #52: "Setting up swapspace version 1, size = 5.6 GiB (6039793664 bytes)\nLABEL=swapMX, UUID=6ebaaa24-177f-41c4-a4f3-5658721154b0\n"
2021-11-02 03:27:52.069 DBG default: SErr #52: "mkswap: /dev/sda3: warning: wiping old swap signature.\n"
2021-11-02 03:27:52.069 DBG default: Exit #52: 0 QProcess::NormalExit
2021-11-02 03:27:52.069 DBG default: << bool PartMan::mountPartitions() >>
2021-11-02 03:27:52.069 DBG default: ++ Mounting: /dev/sda2 ++
2021-11-02 03:27:52.080 DBG default: MkPath(SUCCESS): "/mnt/antiX/"
2021-11-02 03:27:52.080 DBG default: Exec #53: /bin/mount /dev/sda2 /mnt/antiX/ -o noatime
2021-11-02 03:27:52.155 DBG default: Exit #53: 0 QProcess::NormalExit
2021-11-02 03:27:52.155 DBG default: Exec #54: blkid -c /dev/null
2021-11-02 03:27:52.271 DBG default: SOut #54: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"8702-DE8F\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"50d7be26-538a-4577-8a4c-2e8132f5fd90\"\n/dev/sda2: LABEL=\"rootMX21\" UUID=\"1cff286a-8978-489b-812b-a71e2cb0a8cb\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"b7bdfa25-92dc-44dd-b6d3-e1d726f7c375\"\n/dev/sda3: LABEL=\"swapMX\" UUID=\"6ebaaa24-177f-41c4-a4f3-5658721154b0\" TYPE=\"swap\" PARTLABEL=\"primary\" PARTUUID=\"28a1deff-3786-4fc5-b389-40bdf62d05d8\"\n/dev/sdb1: BLOCK_SIZE=\"2048\" UUID=\"2021-10-26-00-31-12-00\" LABEL=\"MX-Live\" TYPE=\"iso9660\" PTUUID=\"103fdffb\" PTTYPE=\"dos\" PARTUUID=\"103fdffb-01\"\n/dev/sdb2: SEC_TYPE=\"msdos\" LABEL_FATBOOT=\"EFI-LIVE\" LABEL=\"EFI-LIVE\" UUID=\"7249-CF0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"103fdffb-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-11-02 03:27:52.271 DBG default: Exit #54: 0 QProcess::NormalExit
2021-11-02 03:27:52.272 DBG default: << bool MInstall::installLinux() >>
2021-11-02 03:27:52.272 DBG default: ++ Creating system directories ++
2021-11-02 03:27:52.281 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 03:27:52.281 DBG default: Exec #55: ps -e | grep 'udisksd'
2021-11-02 03:27:52.306 DBG default: SOut #55: "   6204 ?        00:00:00 udisksd\n"
2021-11-02 03:27:52.306 DBG default: Exit #55: 0 QProcess::NormalExit
2021-11-02 03:27:52.306 DBG default: Exec #56: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-11-02 03:27:52.319 DBG default: SErr #56: "grep: /lib/udev/rules.d: Is a directory\n"
2021-11-02 03:27:52.319 DBG default: Exit #56: 2 QProcess::NormalExit
2021-11-02 03:27:52.319 DBG default: Exec #57: rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-11-02 03:27:52.330 DBG default: Exit #57: 0 QProcess::NormalExit
2021-11-02 03:27:52.330 DBG default: Exec #58: udevadm control --reload
2021-11-02 03:27:52.351 DBG default: Exit #58: 0 QProcess::NormalExit
2021-11-02 03:27:52.351 DBG default: Exec #59: partprobe -s
2021-11-02 03:27:53.678 DBG default: SOut #59: "/dev/sda: gpt partitions 1 2 3\n"
2021-11-02 03:27:53.678 DBG default: SErr #59: "Error: Partition(s) 1 on /dev/sdb have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.\n"
2021-11-02 03:27:53.678 DBG default: Exit #59: 1 QProcess::NormalExit
2021-11-02 03:27:53.685 DBG default: Sleep #1: 1000ms
2021-11-02 03:27:54.636 DBG default: Sleep #1: exit 0
2021-11-02 03:27:54.636 DBG default: << bool MInstall::copyLinux() >>
2021-11-02 03:27:54.641 DBG default: ++ Copying new system ++
2021-11-02 03:27:54.648 DBG default: Exec COPY: /bin/cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/libx32 /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX
2021-11-02 03:29:31.250 DBG default: Exit COPY: 0 QProcess::NormalExit
2021-11-02 03:29:31.250 DBG default: ++ Fixing configuration ++
2021-11-02 03:29:31.264 DBG default: Exec #60: /usr/sbin/live-to-installed /mnt/antiX
2021-11-02 03:29:31.441 DBG default: SErr #60: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/Installer.desktop\xE2\x80\x99: No such file or directory\nfind: \xE2\x80\x98/mnt/antiX/home/*//.idesktop/gazelle.lnk\xE2\x80\x99: No such file or directory\n"
2021-11-02 03:29:31.441 DBG default: Exit #60: 0 QProcess::NormalExit
2021-11-02 03:29:31.441 DBG default: Desktop menu
2021-11-02 03:29:31.441 DBG default: Exec #61: chroot /mnt/antiX desktop-menu --write-out-global
2021-11-02 03:29:31.460 DBG default: SErr #61: "chroot: failed to run command \xE2\x80\x98""desktop-menu\xE2\x80\x99: No such file or directory\n"
2021-11-02 03:29:31.460 DBG default: Exit #61: 127 QProcess::NormalExit
2021-11-02 03:29:31.460 DBG default: Creating fstab entry for: "/" "/dev/sda2"
2021-11-02 03:29:31.460 DBG default: Exec #62: blkid -o value UUID -s UUID /dev/sda2
2021-11-02 03:29:31.492 DBG default: Exit #62: 0 QProcess::NormalExit
2021-11-02 03:29:31.493 DBG default: Exec #63: blkid /dev/sda2 -o value -s TYPE
2021-11-02 03:29:31.507 DBG default: Exit #63: 0 QProcess::NormalExit
2021-11-02 03:29:31.507 DBG default: Creating fstab entry for: "SWAP" "/dev/sda3"
2021-11-02 03:29:31.507 DBG default: Exec #64: blkid -o value UUID -s UUID /dev/sda3
2021-11-02 03:29:31.542 DBG default: Exit #64: 0 QProcess::NormalExit
2021-11-02 03:29:31.542 DBG default: Exec #65: blkid /dev/sda3 -o value -s TYPE
2021-11-02 03:29:31.558 DBG default: Exit #65: 0 QProcess::NormalExit
2021-11-02 03:29:31.558 DBG default: Exec #66: blkid -o value UUID -s UUID /dev/sda1
2021-11-02 03:29:31.586 DBG default: Exit #66: 0 QProcess::NormalExit
2021-11-02 03:29:31.587 DBG default: espdev "/dev/sda1" "UUID=8702-DE8F"
2021-11-02 03:29:31.587 DBG default: Exec #67: /bin/rm -rf /mnt/antiX/home/demo
2021-11-02 03:29:31.631 DBG default: Exit #67: 0 QProcess::NormalExit
2021-11-02 03:29:31.631 DBG default: Exec #68: /bin/rm -rf /mnt/antiX/media/sd*
2021-11-02 03:29:31.645 DBG default: Exit #68: 0 QProcess::NormalExit
2021-11-02 03:29:31.645 DBG default: Exec #69: /bin/rm -rf /mnt/antiX/media/hd*
2021-11-02 03:29:31.657 DBG default: Exit #69: 0 QProcess::NormalExit
2021-11-02 03:29:31.657 DBG default: Exec #70: guess-hwclock
2021-11-02 03:29:32.985 DBG default: Exit #70: 0 QProcess::NormalExit
2021-11-02 03:29:32.985 DBG default: Exec #71: /bin/mount --rbind --make-rslave /dev /mnt/antiX/dev
2021-11-02 03:29:33.006 DBG default: Exit #71: 0 QProcess::NormalExit
2021-11-02 03:29:33.006 DBG default: Exec #72: chroot /mnt/antiX rm  /var/lib/dbus/machine-id /etc/machine-id
2021-11-02 03:29:33.053 DBG default: Exit #72: 0 QProcess::NormalExit
2021-11-02 03:29:33.053 DBG default: Exec #73: chroot /mnt/antiX dbus-uuidgen --ensure=/etc/machine-id
2021-11-02 03:29:33.105 DBG default: Exit #73: 0 QProcess::NormalExit
2021-11-02 03:29:33.106 DBG default: Exec #74: chroot /mnt/antiX dbus-uuidgen --ensure
2021-11-02 03:29:33.132 DBG default: Exit #74: 0 QProcess::NormalExit
2021-11-02 03:29:33.132 DBG default: Exec #75: /bin/umount -R /mnt/antiX/dev
2021-11-02 03:29:33.155 DBG default: Exit #75: 0 QProcess::NormalExit
2021-11-02 03:29:33.155 DBG default: ++ Paused for required operator input ++
2021-11-02 03:29:33.211 DBG default: ++ Setting system configuration ++
2021-11-02 03:29:33.221 DBG default: Exec #76: lspci -n | grep -qE '80ee:beef|80ee:cafe'
2021-11-02 03:29:33.275 DBG default: Exit #76: 1 QProcess::NormalExit
2021-11-02 03:29:33.275 DBG default: Exec #77: /bin/mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.296 DBG default: Exit #77: 1 QProcess::NormalExit
2021-11-02 03:29:33.296 DBG default: Exec #78: /bin/mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.311 DBG default: Exit #78: 1 QProcess::NormalExit
2021-11-02 03:29:33.311 DBG default: Exec #79: /bin/mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.327 DBG default: Exit #79: 1 QProcess::NormalExit
2021-11-02 03:29:33.327 DBG default: Exec #80: /bin/mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1
2021-11-02 03:29:33.342 DBG default: Exit #80: 1 QProcess::NormalExit
2021-11-02 03:29:33.342 DBG default: Exec #81: /bin/mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1
2021-11-02 03:29:33.357 DBG default: Exit #81: 1 QProcess::NormalExit
2021-11-02 03:29:33.357 DBG default: Set service: "anacron" true
2021-11-02 03:29:33.357 DBG default: Exec #82: chroot /mnt/antiX update-rc.d anacron defaults
2021-11-02 03:29:33.521 DBG default: Exit #82: 0 QProcess::NormalExit
2021-11-02 03:29:33.521 DBG default: Exec #83: chroot /mnt/antiX systemctl enable anacron
2021-11-02 03:29:33.702 DBG default: SErr #83: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2021-11-02 03:29:33.702 DBG default: Exit #83: 0 QProcess::NormalExit
2021-11-02 03:29:33.702 DBG default: Set service: "cron" true
2021-11-02 03:29:33.702 DBG default: Exec #84: chroot /mnt/antiX update-rc.d cron defaults
2021-11-02 03:29:33.783 DBG default: Exit #84: 0 QProcess::NormalExit
2021-11-02 03:29:33.784 DBG default: Exec #85: chroot /mnt/antiX systemctl enable cron
2021-11-02 03:29:33.943 DBG default: SErr #85: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2021-11-02 03:29:33.943 DBG default: Exit #85: 0 QProcess::NormalExit
2021-11-02 03:29:33.944 DBG default: Set service: "sudo" true
2021-11-02 03:29:33.944 DBG default: Exec #86: chroot /mnt/antiX update-rc.d sudo defaults
2021-11-02 03:29:34.027 DBG default: Exit #86: 0 QProcess::NormalExit
2021-11-02 03:29:34.027 DBG default: Exec #87: chroot /mnt/antiX systemctl enable sudo
2021-11-02 03:29:34.044 DBG default: SErr #87: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:34.044 DBG default: Exit #87: 1 QProcess::NormalExit
2021-11-02 03:29:34.044 DBG default: Set service: "cpufrequtils" true
2021-11-02 03:29:34.044 DBG default: Exec #88: chroot /mnt/antiX update-rc.d cpufrequtils defaults
2021-11-02 03:29:34.125 DBG default: Exit #88: 0 QProcess::NormalExit
2021-11-02 03:29:34.125 DBG default: Exec #89: chroot /mnt/antiX systemctl enable cpufrequtils
2021-11-02 03:29:34.283 DBG default: SErr #89: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2021-11-02 03:29:34.283 DBG default: Exit #89: 0 QProcess::NormalExit
2021-11-02 03:29:34.284 DBG default: Set service: "smartmontools" true
2021-11-02 03:29:34.284 DBG default: Exec #90: chroot /mnt/antiX update-rc.d smartmontools defaults
2021-11-02 03:29:34.365 DBG default: Exit #90: 0 QProcess::NormalExit
2021-11-02 03:29:34.365 DBG default: Exec #91: chroot /mnt/antiX systemctl enable smartmontools
2021-11-02 03:29:34.524 DBG default: SErr #91: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2021-11-02 03:29:34.524 DBG default: Exit #91: 0 QProcess::NormalExit
2021-11-02 03:29:34.524 DBG default: Set service: "acpid" true
2021-11-02 03:29:34.524 DBG default: Exec #92: chroot /mnt/antiX update-rc.d acpid defaults
2021-11-02 03:29:34.613 DBG default: Exit #92: 0 QProcess::NormalExit
2021-11-02 03:29:34.613 DBG default: Exec #93: chroot /mnt/antiX systemctl enable acpid
2021-11-02 03:29:34.776 DBG default: SErr #93: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\nCreated symlink /etc/systemd/system/multi-user.target.wants/acpid.service \xE2\x86\x92 /lib/systemd/system/acpid.service.\n"
2021-11-02 03:29:34.776 DBG default: Exit #93: 0 QProcess::NormalExit
2021-11-02 03:29:34.776 DBG default: Set service: "hddtemp" true
2021-11-02 03:29:34.776 DBG default: Exec #94: chroot /mnt/antiX update-rc.d hddtemp defaults
2021-11-02 03:29:34.859 DBG default: Exit #94: 0 QProcess::NormalExit
2021-11-02 03:29:34.859 DBG default: Exec #95: chroot /mnt/antiX systemctl enable hddtemp
2021-11-02 03:29:35.014 DBG default: SErr #95: "hddtemp.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable hddtemp\n"
2021-11-02 03:29:35.014 DBG default: Exit #95: 0 QProcess::NormalExit
2021-11-02 03:29:35.015 DBG default: Set service: "dbus" true
2021-11-02 03:29:35.015 DBG default: Exec #96: chroot /mnt/antiX update-rc.d dbus defaults
2021-11-02 03:29:35.097 DBG default: Exit #96: 0 QProcess::NormalExit
2021-11-02 03:29:35.097 DBG default: Exec #97: chroot /mnt/antiX systemctl enable dbus
2021-11-02 03:29:35.257 DBG default: SErr #97: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n  .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n  a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n  D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n  instance name specified.\n"
2021-11-02 03:29:35.257 DBG default: Exit #97: 0 QProcess::NormalExit
2021-11-02 03:29:35.257 DBG default: Set service: "saned" true
2021-11-02 03:29:35.257 DBG default: Exec #98: chroot /mnt/antiX update-rc.d saned defaults
2021-11-02 03:29:35.350 DBG default: Exit #98: 0 QProcess::NormalExit
2021-11-02 03:29:35.350 DBG default: Exec #99: chroot /mnt/antiX systemctl enable saned
2021-11-02 03:29:35.369 DBG default: SErr #99: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:35.369 DBG default: Exit #99: 1 QProcess::NormalExit
2021-11-02 03:29:35.369 DBG default: Set service: "haveged" true
2021-11-02 03:29:35.369 DBG default: Exec #100: chroot /mnt/antiX update-rc.d haveged defaults
2021-11-02 03:29:35.447 DBG default: Exit #100: 0 QProcess::NormalExit
2021-11-02 03:29:35.447 DBG default: Exec #101: chroot /mnt/antiX systemctl enable haveged
2021-11-02 03:29:35.607 DBG default: SErr #101: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2021-11-02 03:29:35.607 DBG default: Exit #101: 0 QProcess::NormalExit
2021-11-02 03:29:35.607 DBG default: Set service: "bluetooth" true
2021-11-02 03:29:35.607 DBG default: Exec #102: chroot /mnt/antiX update-rc.d bluetooth defaults
2021-11-02 03:29:35.688 DBG default: Exit #102: 0 QProcess::NormalExit
2021-11-02 03:29:35.688 DBG default: Exec #103: chroot /mnt/antiX systemctl enable bluetooth
2021-11-02 03:29:35.849 DBG default: SErr #103: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable bluetooth\n"
2021-11-02 03:29:35.849 DBG default: Exit #103: 0 QProcess::NormalExit
2021-11-02 03:29:35.849 DBG default: Set service: "rsync" true
2021-11-02 03:29:35.849 DBG default: Exec #104: chroot /mnt/antiX update-rc.d rsync defaults
2021-11-02 03:29:35.931 DBG default: Exit #104: 0 QProcess::NormalExit
2021-11-02 03:29:35.931 DBG default: Exec #105: chroot /mnt/antiX systemctl enable rsync
2021-11-02 03:29:36.089 DBG default: SErr #105: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\n"
2021-11-02 03:29:36.089 DBG default: Exit #105: 0 QProcess::NormalExit
2021-11-02 03:29:36.089 DBG default: Set service: "cups" true
2021-11-02 03:29:36.089 DBG default: Exec #106: chroot /mnt/antiX update-rc.d cups defaults
2021-11-02 03:29:36.173 DBG default: Exit #106: 0 QProcess::NormalExit
2021-11-02 03:29:36.173 DBG default: Exec #107: chroot /mnt/antiX systemctl enable cups
2021-11-02 03:29:36.330 DBG default: SErr #107: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cups\n"
2021-11-02 03:29:36.331 DBG default: Exit #107: 0 QProcess::NormalExit
2021-11-02 03:29:36.331 DBG default: Exec #108: sed -i 's/WORKGROUP/Workgroup/g' /mnt/antiX/etc/samba/smb.conf
2021-11-02 03:29:36.349 DBG default: Exit #108: 0 QProcess::NormalExit
2021-11-02 03:29:36.350 DBG default: Set service: "smbd" true
2021-11-02 03:29:36.350 DBG default: Exec #109: chroot /mnt/antiX update-rc.d smbd defaults
2021-11-02 03:29:36.431 DBG default: Exit #109: 0 QProcess::NormalExit
2021-11-02 03:29:36.431 DBG default: Exec #110: chroot /mnt/antiX systemctl enable smbd
2021-11-02 03:29:36.596 DBG default: SErr #110: "Synchronizing state of smbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smbd\n"
2021-11-02 03:29:36.596 DBG default: Exit #110: 0 QProcess::NormalExit
2021-11-02 03:29:36.596 DBG default: Set service: "nmbd" true
2021-11-02 03:29:36.596 DBG default: Exec #111: chroot /mnt/antiX update-rc.d nmbd defaults
2021-11-02 03:29:36.696 DBG default: Exit #111: 0 QProcess::NormalExit
2021-11-02 03:29:36.696 DBG default: Exec #112: chroot /mnt/antiX systemctl enable nmbd
2021-11-02 03:29:36.858 DBG default: SErr #112: "Synchronizing state of nmbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable nmbd\n"
2021-11-02 03:29:36.859 DBG default: Exit #112: 0 QProcess::NormalExit
2021-11-02 03:29:36.859 DBG default: Set service: "samba-ad-dc" true
2021-11-02 03:29:36.859 DBG default: Exec #113: chroot /mnt/antiX update-rc.d samba-ad-dc defaults
2021-11-02 03:29:36.948 DBG default: Exit #113: 0 QProcess::NormalExit
2021-11-02 03:29:36.948 DBG default: Exec #114: chroot /mnt/antiX systemctl enable samba-ad-dc
2021-11-02 03:29:36.966 DBG default: SErr #114: "Failed to look up unit file state: Invalid argument\n"
2021-11-02 03:29:36.966 DBG default: Exit #114: 1 QProcess::NormalExit
2021-11-02 03:29:36.966 DBG default: Exec #115: sed -i 's/'"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')"'/Alex-ProBook/' /mnt/antiX/etc/hosts
2021-11-02 03:29:37.016 DBG default: Exit #115: 0 QProcess::NormalExit
2021-11-02 03:29:37.017 DBG default: Exec #116: echo "Alex-ProBook" | cat > /mnt/antiX/etc/hostname
2021-11-02 03:29:37.034 DBG default: Exit #116: 0 QProcess::NormalExit
2021-11-02 03:29:37.034 DBG default: Exec #117: echo "Alex-ProBook" | cat > /mnt/antiX/etc/mailname
2021-11-02 03:29:37.049 DBG default: Exit #117: 0 QProcess::NormalExit
2021-11-02 03:29:37.049 DBG default: Exec #118: sed -i 's/.*send host-name.*/send host-name "Alex-ProBook";/g' /mnt/antiX/etc/dhcp/dhclient.conf
2021-11-02 03:29:37.066 DBG default: Exit #118: 0 QProcess::NormalExit
2021-11-02 03:29:37.066 DBG default: Exec #119: echo "Alex-ProBook" | cat > /mnt/antiX/etc/defaultdomain
2021-11-02 03:29:37.083 DBG default: Exit #119: 0 QProcess::NormalExit
2021-11-02 03:29:37.083 DBG default: << void MInstall::setLocale() >>
2021-11-02 03:29:37.083 DBG default: Update locale
2021-11-02 03:29:37.083 DBG default: Exec #120: chroot /mnt/antiX /usr/sbin/update-locale "LANG=de_DE.UTF-8"
2021-11-02 03:29:37.139 DBG default: Exit #120: 0 QProcess::NormalExit
2021-11-02 03:29:37.139 DBG default: Exec #121: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /mnt/antiX/etc/localtime
2021-11-02 03:29:37.162 DBG default: Exit #121: 0 QProcess::NormalExit
2021-11-02 03:29:37.162 DBG default: Exec #122: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /etc/localtime
2021-11-02 08:29:37.180 DBG default: Exit #122: 0 QProcess::NormalExit
2021-11-02 08:29:37.180 DBG default: Exec #123: echo Europe/Berlin > /mnt/antiX/etc/timezone
2021-11-02 08:29:37.195 DBG default: Exit #123: 0 QProcess::NormalExit
2021-11-02 08:29:37.195 DBG default: Exec #124: echo Europe/Berlin > /etc/timezone
2021-11-02 08:29:37.212 DBG default: Exit #124: 0 QProcess::NormalExit
2021-11-02 08:29:37.212 DBG default: Exec #125: echo '0.0 0 0.0
0
UTC' > /etc/adjtime
2021-11-02 08:29:37.227 DBG default: Exit #125: 0 QProcess::NormalExit
2021-11-02 08:29:37.227 DBG default: Exec #126: hwclock --hctosys
2021-11-02 08:29:38.000 DBG default: Exit #126: 0 QProcess::NormalExit
2021-11-02 08:29:38.001 DBG default: Exec #127: /bin/cp -f /etc/adjtime /mnt/antiX/etc/
2021-11-02 08:29:38.019 DBG default: Exit #127: 0 QProcess::NormalExit
2021-11-02 08:29:38.019 DBG default: Exec #128: /bin/cp -f /etc/default/rcS /mnt/antiX/etc/default
2021-11-02 08:29:38.038 DBG default: Exit #128: 0 QProcess::NormalExit
2021-11-02 08:29:38.038 DBG default: Exec #129: sed -i '/data0=/c\data0=%H:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2021-11-02 08:29:38.055 DBG default: SErr #129: "sed: can't read /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2021-11-02 08:29:38.055 DBG default: Exit #129: 2 QProcess::NormalExit
2021-11-02 08:29:38.055 DBG default: Exec #130: sed -i '/data0=/c\data0=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2021-11-02 08:29:38.071 DBG default: SErr #130: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2021-11-02 08:29:38.071 DBG default: Exit #130: 2 QProcess::NormalExit
2021-11-02 08:29:38.072 DBG default: Exec #131: sed -i '/time_format=/c\time_format=%H:%M' /home/demo/.config/xfce4/panel/datetime-1.rc
2021-11-02 08:29:38.089 DBG default: Exit #131: 0 QProcess::NormalExit
2021-11-02 08:29:38.089 DBG default: Exec #132: sed -i '/time_format=/c\time_format=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc
2021-11-02 08:29:38.125 DBG default: Exit #132: 0 QProcess::NormalExit
2021-11-02 08:29:38.125 DBG default: Exec #133: sed -i '/use24hFormat=/c\use24hFormat=2' /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc
2021-11-02 08:29:38.145 DBG default: SErr #133: "sed: can't read /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2021-11-02 08:29:38.145 DBG default: Exit #133: 2 QProcess::NormalExit
2021-11-02 08:29:38.145 DBG default: Exec #134: sed -i '/use24hFormat=/c\use24hFormat=2' /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc
2021-11-02 08:29:38.162 DBG default: SErr #134: "sed: can't read /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2021-11-02 08:29:38.163 DBG default: Exit #134: 2 QProcess::NormalExit
2021-11-02 08:29:38.163 DBG default: Exec #135: sed -i 's/%H:%M/%H:%M/g' /mnt/antiX/etc/skel/.icewm/preferences
2021-11-02 08:29:38.180 DBG default: SErr #135: "sed: can't read /mnt/antiX/etc/skel/.icewm/preferences: No such file or directory\n"
2021-11-02 08:29:38.180 DBG default: Exit #135: 2 QProcess::NormalExit
2021-11-02 08:29:38.180 DBG default: Exec #136: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.fluxbox/init
2021-11-02 08:29:38.197 DBG default: SErr #136: "sed: can't read /mnt/antiX/etc/skel/.fluxbox/init: No such file or directory\n"
2021-11-02 08:29:38.197 DBG default: Exit #136: 2 QProcess::NormalExit
2021-11-02 08:29:38.197 DBG default: Exec #137: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.jwm/tray
2021-11-02 08:29:38.223 DBG default: SErr #137: "sed: can't read /mnt/antiX/etc/skel/.jwm/tray: No such file or directory\n"
2021-11-02 08:29:38.223 DBG default: Exit #137: 2 QProcess::NormalExit
2021-11-02 08:29:38.223 DBG default: Localize repo
2021-11-02 08:29:38.223 DBG default: Exec #138: chroot /mnt/antiX localize-repo default
2021-11-02 08:29:38.329 DBG default: SOut #138: "File: mx.list\n"
2021-11-02 08:29:38.329 DBG default: Exit #138: 0 QProcess::NormalExit
2021-11-02 08:29:38.329 DBG default: Exec #139: chroot /mnt/antiX chpasswd
2021-11-02 08:29:38.477 DBG default: Exit #139: 0 QProcess::NormalExit
2021-11-02 08:29:38.477 DBG default: Exec #140: /bin/cp -a /mnt/antiX/etc/skel /mnt/antiX/home/Alex
2021-11-02 08:29:39.111 DBG default: Exit #140: 0 QProcess::NormalExit
2021-11-02 08:29:39.111 DBG default: Exec #141: chown -R demo:demo /mnt/antiX/home/Alex
2021-11-02 08:29:39.139 DBG default: Exit #141: 0 QProcess::NormalExit
2021-11-02 08:29:39.139 DBG default: Exec #142: sed -i 's/demo/Alex/g' /mnt/antiX/etc/group
2021-11-02 08:29:39.159 DBG default: Exit #142: 0 QProcess::NormalExit
2021-11-02 08:29:39.159 DBG default: Exec #143: sed -i 's/demo/Alex/g' /mnt/antiX/etc/gshadow
2021-11-02 08:29:39.179 DBG default: Exit #143: 0 QProcess::NormalExit
2021-11-02 08:29:39.179 DBG default: Exec #144: sed -i 's/demo/Alex/g' /mnt/antiX/etc/passwd
2021-11-02 08:29:39.198 DBG default: Exit #144: 0 QProcess::NormalExit
2021-11-02 08:29:39.198 DBG default: Exec #145: sed -i 's/demo/Alex/g' /mnt/antiX/etc/shadow
2021-11-02 08:29:39.217 DBG default: Exit #145: 0 QProcess::NormalExit
2021-11-02 08:29:39.218 DBG default: Exec #146: sed -i 's/demo/Alex/g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.236 DBG default: SErr #146: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.236 DBG default: Exit #146: 2 QProcess::NormalExit
2021-11-02 08:29:39.236 DBG default: Exec #147: sed -i 's/demo/Alex/g' /mnt/antiX/etc/lightdm/lightdm.conf
2021-11-02 08:29:39.255 DBG default: Exit #147: 0 QProcess::NormalExit
2021-11-02 08:29:39.255 DBG default: Exec #148: sed -i 's/demo/Alex/g' /mnt/antiX/home/*/.gtkrc-2.0
2021-11-02 08:29:39.273 DBG default: SErr #148: "sed: can't read /mnt/antiX/home/*/.gtkrc-2.0: No such file or directory\n"
2021-11-02 08:29:39.273 DBG default: Exit #148: 2 QProcess::NormalExit
2021-11-02 08:29:39.273 DBG default: Exec #149: sed -i 's/demo/Alex/g' /mnt/antiX/root/.gtkrc-2.0
2021-11-02 08:29:39.291 DBG default: SErr #149: "sed: can't read /mnt/antiX/root/.gtkrc-2.0: No such file or directory\n"
2021-11-02 08:29:39.291 DBG default: Exit #149: 2 QProcess::NormalExit
2021-11-02 08:29:39.291 DBG default: Exec #150: sed -i 's/auto_login/#auto_login/g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.308 DBG default: SErr #150: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.308 DBG default: Exit #150: 2 QProcess::NormalExit
2021-11-02 08:29:39.308 DBG default: Exec #151: sed -i 's/default_user /#default_user /g' /mnt/antiX/etc/slim.conf
2021-11-02 08:29:39.326 DBG default: SErr #151: "sed: can't read /mnt/antiX/etc/slim.conf: No such file or directory\n"
2021-11-02 08:29:39.327 DBG default: Exit #151: 2 QProcess::NormalExit
2021-11-02 08:29:39.327 DBG default: Exec #152: sed -i 's/autologin-user=/#autologin-user=/g' /mnt/antiX/etc/lightdm/lightdm.conf
2021-11-02 08:29:39.345 DBG default: Exit #152: 0 QProcess::NormalExit
2021-11-02 08:29:39.345 DBG default: Exec #153: sed -i 's/User=.*/User=/g' /mnt/antiX/etc/sddm.conf
2021-11-02 08:29:39.362 DBG default: SErr #153: "sed: can't read /mnt/antiX/etc/sddm.conf: No such file or directory\n"
2021-11-02 08:29:39.362 DBG default: Exit #153: 2 QProcess::NormalExit
2021-11-02 08:29:39.362 DBG default: Exec #154: touch /mnt/antiX/var/mail/Alex
2021-11-02 08:29:39.380 DBG default: Exit #154: 0 QProcess::NormalExit
2021-11-02 08:29:39.393 DBG default: Configuration: /mnt/antiX/etc/minstall.conf
2021-11-02 08:29:39.393 DBG default:  - Product: MX Linux 21
2021-11-02 08:29:39.393 DBG default:  - Version: 21.10.14
2021-11-02 08:29:39.393 DBG default:  = GRUB:
2021-11-02 08:29:39.393 DBG default:    - Install: false
2021-11-02 08:29:39.393 DBG default:    - Location: sda1
2021-11-02 08:29:39.393 DBG default:    - TargetType: ESP
2021-11-02 08:29:39.393 DBG default:  = Localization:
2021-11-02 08:29:39.393 DBG default:    - ClockHours: 24
2021-11-02 08:29:39.393 DBG default:    - LocalClock: false
2021-11-02 08:29:39.393 DBG default:    - Locale: de_DE.UTF-8
2021-11-02 08:29:39.393 DBG default:    - Timezone: Europe/Berlin
2021-11-02 08:29:39.394 DBG default:  = Network:
2021-11-02 08:29:39.394 DBG default:    - ComputerName: Alex-ProBook
2021-11-02 08:29:39.394 DBG default:    - Domain: example.dom
2021-11-02 08:29:39.394 DBG default:    - Samba: true
2021-11-02 08:29:39.394 DBG default:    - Workgroup: Workgroup
2021-11-02 08:29:39.394 DBG default:  = Services:
2021-11-02 08:29:39.394 DBG default:    - acpid: true
2021-11-02 08:29:39.394 DBG default:    - anacron: true
2021-11-02 08:29:39.394 DBG default:    - bluetooth: true
2021-11-02 08:29:39.394 DBG default:    - cpufrequtils: true
2021-11-02 08:29:39.394 DBG default:    - cron: true
2021-11-02 08:29:39.394 DBG default:    - cups: true
2021-11-02 08:29:39.394 DBG default:    - dbus: true
2021-11-02 08:29:39.394 DBG default:    - haveged: true
2021-11-02 08:29:39.394 DBG default:    - hddtemp: true
2021-11-02 08:29:39.394 DBG default:    - rsync: true
2021-11-02 08:29:39.394 DBG default:    - saned: true
2021-11-02 08:29:39.394 DBG default:    - smartmontools: true
2021-11-02 08:29:39.395 DBG default:    - sudo: true
2021-11-02 08:29:39.395 DBG default:  = Storage:
2021-11-02 08:29:39.395 DBG default:    - Drive: sda
2021-11-02 08:29:39.395 DBG default:    - DriveEncrypt: false
2021-11-02 08:29:39.395 DBG default:    - RootPortion: 100
2021-11-02 08:29:39.395 DBG default:    - Target: Drive
2021-11-02 08:29:39.395 DBG default:  = User:
2021-11-02 08:29:39.395 DBG default:    - Autologin: false
2021-11-02 08:29:39.395 DBG default:    - EnableRoot: true
2021-11-02 08:29:39.395 DBG default:    - SaveDesktop: false
2021-11-02 08:29:39.395 DBG default:    - Username: Alex
2021-11-02 08:29:39.395 DBG default: End of configuration.
2021-11-02 08:29:39.395 DBG default: Exec #155: /bin/sync
2021-11-02 08:29:39.799 DBG default: Exit #155: 0 QProcess::NormalExit
2021-11-02 08:29:39.800 DBG default: << bool MInstall::installLoader() >>
2021-11-02 08:29:39.811 DBG default: Exec #156: /bin/ls /mnt/antiX/boot | grep 'initrd.img-3.6'
2021-11-02 08:29:39.831 DBG default: Exit #156: 1 QProcess::NormalExit
2021-11-02 08:29:39.832 DBG default: Exec #157: /bin/mount -t efivarfs efivarfs /sys/firmware/efi/efivars
2021-11-02 08:29:39.848 DBG default: SErr #157: "mount: /sys/firmware/efi/efivars: efivarfs already mounted on /sys/firmware/efi/efivars.\n"
2021-11-02 08:29:39.849 DBG default: Exit #157: 32 QProcess::NormalExit
2021-11-02 08:29:39.849 DBG default: ++ Updating initramfs ++
2021-11-02 08:29:39.859 DBG default: Update initramfs
2021-11-02 08:29:39.859 DBG default: Exec #158: chroot /mnt/antiX update-initramfs -u -t -k all
2021-11-02 08:30:20.341 DBG default: SOut #158: "update-initramfs: Generating /boot/initrd.img-5.14.0-3mx-amd64\n"
2021-11-02 08:30:20.342 DBG default: SErr #158: "grep: /proc/cpuinfo: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ncryptsetup: WARNING: Couldn't determine root device\nsed: can't read /proc/cmdline: No such file or directory\ngrep: /proc/swaps: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ngrep: /proc/cpuinfo: No such file or directory\nW: Couldn't identify type of root file system for fsck hook\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
2021-11-02 08:30:20.342 DBG default: Exit #158: 0 QProcess::NormalExit
2021-11-02 08:30:20.351 DBG default: ++ Cleaning up ++
2021-11-02 08:30:20.363 DBG default: << void MInstall::cleanup(bool) >>
2021-11-02 08:30:20.363 DBG default: << void MInstall::setupAutoMount(bool) >>
2021-11-02 08:30:20.363 DBG default: Exec #159: /bin/cp /var/log/minstall.log /mnt/antiX/var/log >/dev/null 2>&1
This might be the problem

Code: Select all

2021-11-02 08:30:20.342 DBG default: SErr #158: "grep: /proc/cpuinfo: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ncryptsetup: WARNING: Couldn't determine root device\nsed: can't read /proc/cmdline: No such file or directory\ngrep: /proc/swaps: No such file or directory\n/usr/share/initramfs-tools/hooks/cryptroot: 595: cannot open /proc/mounts: No such file\ngrep: /proc/cpuinfo: No such file or directory\nW: Couldn't identify type of root file system for fsck hook\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nWARNING: Unknown X keysym \"dead_belowmacron\"\nW: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays.\nW: mdadm: failed to auto-generate temporary mdadm.conf file.\n"
*updated*
I tried to install the Xfce Version and it did not work. Then i tried ahs version with legacy enabled and i got the same error.
so let me see if I understand.

1. you have other MX releases installed that you *did* install grub for?

2. you are not installing grub this time, rather relying on a pre-existing grub boot loader (which you did an update-grub on?)
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
Alex
Posts: 3
Joined: Sat Jun 19, 2021 4:47 am

Re: MX-21 "ahs" (Xfce) RC3 feedback

#40 Post by Alex »

j2mcgreg wrote: Tue Nov 02, 2021 6:38 amI have a Probook that dates from 2017 and there are just three things that you have to do to install MX:

-- disable secure boot

-- disable fast boot

-- select 'use GPT Partitioning' when preparing the usb drive

Also in terms of the bios version on my machine "Legacy" means that you can roll back to Win 7. It does not mean that you can do an MBR based install.

Finally, when I do the initial install of a new version of MX (like MX 21), I always select the "automatically install using entire disk" option rather than custom partitioning. I don't see the point in complicating things on the first go round.
I'll try that, thank you.
dolphin_oracle wrote: Tue Nov 02, 2021 6:46 am so let me see if I understand.

1. you have other MX releases installed that you *did* install grub for?

2. you are not installing grub this time, rather relying on a pre-existing grub boot loader (which you did an update-grub on?)
The way you ask makes me think i have to have grub installed to boot any os even if i don't want to use different os on the same machine. If that is the case, i'm a fool and wasted a lot of time... i unchecked the box during installation


* xxxxxxx me for being a complete idiot... It's working.
Top
Locked

Return to “General”