MX-21 KDE/plasma RC1 feedback

Forum rules
Locked
Message
Author
User avatar
imingame
Posts: 9
Joined: Tue Sep 14, 2021 7:08 am

Re: MX-21 KDE/plasma RC1 feedback

#121 Post by imingame »

Code: Select all

System:
  Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64 
  root=UUID=<filter> ro quiet splash 
  Desktop: KDE Plasma 5.20.5 wm: kwin_x11 dm: SDDM 
  Distro: MX-21_KDE_RC1_x64 Wildflower October 5  2021 
  base: Debian GNU/Linux 11 (bullseye) 
Machine:
  Type: Laptop System: Acer product: Aspire E5-475G v: V1.19 
  serial: <filter> 
  Mobo: Acer model: AntMan_SK v: V1.19 serial: <filter> 
  UEFI [Legacy]: Insyde v: 1.19 date: 09/22/2017 
CPU:
  Topology: Dual Core model: Intel Core i3-6006U bits: 64 type: MT MCP 
  arch: Skylake family: 6 model-id: 4E (78) stepping: 3 microcode: EA 
  L2 cache: 3072 KiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx 
  bogomips: 15999 
  Speed: 1447 MHz min/max: 400/2000 MHz Core speeds (MHz): 1: 1447 
  2: 1221 3: 1504 4: 1540 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, 
  SMT vulnerable 
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
  Type: meltdown mitigation: PTI 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full generic retpoline, IBPB: 
  conditional, IBRS_FW, STIBP: conditional, RSB filling 
  Type: srbds mitigation: Microcode 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] 
  vendor: Acer Incorporated ALI driver: i915 v: kernel bus ID: 00:02.0 
  chip ID: 8086:1916 
  Device-2: NVIDIA GM108M [GeForce 940MX] vendor: Acer Incorporated ALI 
  driver: N/A bus ID: 01:00.0 chip ID: 10de:134d 
  Display: x11 server: X.Org 1.20.13 driver: modesetting 
  unloaded: fbdev,vesa compositor: kwin_x11 resolution: 1366x768~60Hz 
  OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) 
  v: 4.6 Mesa 21.2.1 direct render: Yes 
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio 
  vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel 
  bus ID: 00:1f.3 chip ID: 8086:9d70 
  Sound Server: ALSA v: k5.10.0-8-amd64 
Network:
  Device-1: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter 
  vendor: Lite-On driver: ath10k_pci v: kernel port: 4000 
  bus ID: 03:00.0 chip ID: 168c:0042 
  IF: wlan0 state: up mac: <filter> 
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Acer Incorporated ALI driver: r8169 v: kernel port: 3000 
  bus ID: 04:00.0 chip ID: 10ec:8168 
  IF: eth0 state: down mac: <filter> 
  Device-3: Lite-On Qualcomm Atheros QCA9377 Bluetooth type: USB 
  driver: btusb bus ID: 1-5:3 chip ID: 04ca:3015 
Drives:
  Local Storage: total: 150.01 GiB used: 9.77 GiB (6.5%) 
  ID-1: /dev/sda vendor: Toshiba model: MK1652GSX size: 149.05 GiB 
  block size: physical: 512 B logical: 512 B speed: 3.0 Gb/s 
  serial: <filter> rev: 1C scheme: MBR 
  ID-2: /dev/sdb type: USB vendor: SanDisk model: U3 Cruzer Micro 
  size: 979.8 MiB block size: physical: 512 B logical: 512 B 
  serial: <filter> rev: 3.21 scheme: MBR 
Partition:
  ID-1: / raw size: 143.42 GiB size: 140.11 GiB (97.69%) 
  used: 9.10 GiB (6.5%) fs: ext4 dev: /dev/sda1 
  ID-2: swap-1 size: 5.62 GiB used: 19.1 MiB (0.3%) fs: swap 
  swappiness: 15 (default 60) cache pressure: 100 (default) 
  dev: /dev/sda2 
Sensors:
  System Temperatures: cpu: 51.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Repos:
  No active apt repos in: /etc/apt/sources.list 
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
  1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list 
  1: deb http://deb.debian.org/debian bullseye main contrib non-free
  2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list 
  1: deb http://kartolo.sby.datautama.net.id/mx-packages/mx/repo/ bullseye main non-free
  2: deb http://kartolo.sby.datautama.net.id/mx-packages/mx/repo/ bullseye ahs
Info:
  Processes: 233 Uptime: 2h 07m Memory: 3.72 GiB used: 1.96 GiB (52.8%) 
  Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 
  alt: 10 Shell: quick-system-in running in: quick-system-in 
  inxi: 3.0.36
I had installed xampp-linux-x64-7.4.21-1-installer and test running apache, mysql, phpmyadmin with no problem
But I still can't find VSCode or Sublime text using package installer
Top
User avatar
dolphin_oracle
Developer
Posts: 22456
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-21 KDE/plasma RC1 feedback

#122 Post by dolphin_oracle »

imingame wrote: Mon Oct 11, 2021 11:28 am

Code: Select all

System:
  Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64 
  root=UUID=<filter> ro quiet splash 
  Desktop: KDE Plasma 5.20.5 wm: kwin_x11 dm: SDDM 
  Distro: MX-21_KDE_RC1_x64 Wildflower October 5  2021 
  base: Debian GNU/Linux 11 (bullseye) 
Machine:
  Type: Laptop System: Acer product: Aspire E5-475G v: V1.19 
  serial: <filter> 
  Mobo: Acer model: AntMan_SK v: V1.19 serial: <filter> 
  UEFI [Legacy]: Insyde v: 1.19 date: 09/22/2017 
CPU:
  Topology: Dual Core model: Intel Core i3-6006U bits: 64 type: MT MCP 
  arch: Skylake family: 6 model-id: 4E (78) stepping: 3 microcode: EA 
  L2 cache: 3072 KiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx 
  bogomips: 15999 
  Speed: 1447 MHz min/max: 400/2000 MHz Core speeds (MHz): 1: 1447 
  2: 1221 3: 1504 4: 1540 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, 
  SMT vulnerable 
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
  Type: meltdown mitigation: PTI 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full generic retpoline, IBPB: 
  conditional, IBRS_FW, STIBP: conditional, RSB filling 
  Type: srbds mitigation: Microcode 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] 
  vendor: Acer Incorporated ALI driver: i915 v: kernel bus ID: 00:02.0 
  chip ID: 8086:1916 
  Device-2: NVIDIA GM108M [GeForce 940MX] vendor: Acer Incorporated ALI 
  driver: N/A bus ID: 01:00.0 chip ID: 10de:134d 
  Display: x11 server: X.Org 1.20.13 driver: modesetting 
  unloaded: fbdev,vesa compositor: kwin_x11 resolution: 1366x768~60Hz 
  OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) 
  v: 4.6 Mesa 21.2.1 direct render: Yes 
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio 
  vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel 
  bus ID: 00:1f.3 chip ID: 8086:9d70 
  Sound Server: ALSA v: k5.10.0-8-amd64 
Network:
  Device-1: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter 
  vendor: Lite-On driver: ath10k_pci v: kernel port: 4000 
  bus ID: 03:00.0 chip ID: 168c:0042 
  IF: wlan0 state: up mac: <filter> 
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Acer Incorporated ALI driver: r8169 v: kernel port: 3000 
  bus ID: 04:00.0 chip ID: 10ec:8168 
  IF: eth0 state: down mac: <filter> 
  Device-3: Lite-On Qualcomm Atheros QCA9377 Bluetooth type: USB 
  driver: btusb bus ID: 1-5:3 chip ID: 04ca:3015 
Drives:
  Local Storage: total: 150.01 GiB used: 9.77 GiB (6.5%) 
  ID-1: /dev/sda vendor: Toshiba model: MK1652GSX size: 149.05 GiB 
  block size: physical: 512 B logical: 512 B speed: 3.0 Gb/s 
  serial: <filter> rev: 1C scheme: MBR 
  ID-2: /dev/sdb type: USB vendor: SanDisk model: U3 Cruzer Micro 
  size: 979.8 MiB block size: physical: 512 B logical: 512 B 
  serial: <filter> rev: 3.21 scheme: MBR 
Partition:
  ID-1: / raw size: 143.42 GiB size: 140.11 GiB (97.69%) 
  used: 9.10 GiB (6.5%) fs: ext4 dev: /dev/sda1 
  ID-2: swap-1 size: 5.62 GiB used: 19.1 MiB (0.3%) fs: swap 
  swappiness: 15 (default 60) cache pressure: 100 (default) 
  dev: /dev/sda2 
Sensors:
  System Temperatures: cpu: 51.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Repos:
  No active apt repos in: /etc/apt/sources.list 
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
  1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list 
  1: deb http://deb.debian.org/debian bullseye main contrib non-free
  2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list 
  1: deb http://kartolo.sby.datautama.net.id/mx-packages/mx/repo/ bullseye main non-free
  2: deb http://kartolo.sby.datautama.net.id/mx-packages/mx/repo/ bullseye ahs
Info:
  Processes: 233 Uptime: 2h 07m Memory: 3.72 GiB used: 1.96 GiB (52.8%) 
  Init: SysVinit v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 
  alt: 10 Shell: quick-system-in running in: quick-system-in 
  inxi: 3.0.36
I had installed xampp-linux-x64-7.4.21-1-installer and test running apache, mysql, phpmyadmin with no problem
But I still can't find VSCode or Sublime text using package installer
VScode is in popular apps. Its not in our repo, its in microsoft's repo.

sublime is not free nor open-source and they do not have a linux repository. there is a flatpak available.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Live system help document: https://mxlinux.org/wiki/help-antix-live-usb-system/
Top
User avatar
imingame
Posts: 9
Joined: Tue Sep 14, 2021 7:08 am

Re: MX-21 KDE/plasma RC1 feedback

#123 Post by imingame »

VScode is in popular apps. Its not in our repo, its in microsoft's repo.

sublime is not free nor open-source and they do not have a linux repository. there is a flatpak available.
[/quote]

Thank you, I got it in popular apps
Top
User avatar
Arnox
Posts: 510
Joined: Sat Sep 18, 2021 10:50 pm

Re: MX-21 KDE/plasma RC1 feedback

#124 Post by Arnox »

dolphin_oracle wrote: Mon Oct 11, 2021 7:04 am It’s actually supposed to be on 7. What’s weird is that you aren’t switching to it automaticly when x starts.
Well, here's exactly what's happening. On boot-up, everything will be just fine all the way up to the login screen. And you do see SDDM there for about 2 seconds before it blanks out and goes to a CLI that is responsive but doesn't seem to take any input at all outside of switching virtual terminals.

Now either it is booting up to vt7 but switches to vt1 for some reason, or SDDM is switching to another vt.
Top
User avatar
TOMCAT
Posts: 11
Joined: Sun Jan 12, 2020 8:28 am

Re: MX-21 KDE/plasma RC1 feedback

#125 Post by TOMCAT »

I have selected Google Chrome as my default browser via system settings, but Firefox is still launched when I click on the link in the user manual.
Top
SwampRabbit
Posts: 3602
Joined: Tue Jun 14, 2016 2:02 pm

Re: MX-21 KDE/plasma RC1 feedback

#126 Post by SwampRabbit »

TOMCAT wrote: Mon Oct 11, 2021 10:03 pm I have selected Google Chrome as my default browser via system settings, but Firefox is still launched when I click on the link in the user manual.
What link exactly in the User Manual?
NEW USERS START HERE FAQS, MX Manual, and How to Break Your System - Don't use Ubuntu PPAs! Always post your Quick System Info (QSI) when asking for help.
Top
User avatar
TOMCAT
Posts: 11
Joined: Sun Jan 12, 2020 8:28 am

Re: MX-21 KDE/plasma RC1 feedback

#127 Post by TOMCAT »

SwampRabbit wrote: Mon Oct 11, 2021 10:26 pm
TOMCAT wrote: Mon Oct 11, 2021 10:03 pm I have selected Google Chrome as my default browser via system settings, but Firefox is still launched when I click on the link in the user manual.
What link exactly in the User Manual?
All the links I've tried open through Firefox.

I set the default browser to firefox and then changed it to google, the problem disappeared . Maybe because I used the original user directory when I reinstalled the system?
Top
User avatar
junoluna
Posts: 522
Joined: Sun Sep 29, 2019 11:53 pm

Re: MX-21 KDE/plasma RC1 feedback

#128 Post by junoluna »

further to my post (#120 )about Kodi acting up.... the flatpack version works as it should

i am speculating that the kodi package in MXPI is missing an additional package that the flatpack is installing out of the box

(same behavior on 2 machines btw)
Top
User avatar
Arnox
Posts: 510
Joined: Sat Sep 18, 2021 10:50 pm

Re: MX-21 KDE/plasma RC1 feedback

#129 Post by Arnox »

Alright, this should be my final post on this problem. This is mostly for anyone else that gets this problem.

I did some reading and afterwards, did a bit of tinkering with the /etc/systemd/system/getty.target.wants/getty@tty1.service file. Specifically, I just changed under the [Install] category DefaultInstance to tty2 instead of tty1 just to test something. And then that... Fixed the issue completely??? I don't know why that worked, but it did the job, so I don't really want to mess with it anymore. lol

EDIT: That actually didn't work. Sorry, I accidentally booted into SysVinit. I apologize.
Top
User avatar
Gerson
Posts: 879
Joined: Sun Nov 12, 2017 9:58 am

Re: MX-21 KDE/plasma RC1 feedback

#130 Post by Gerson »

Again this problem that I had already commented, and I thought I had solved, but it reappeared. (viewtopic.php?p=656176#p656176)
When cutting and pasting from a /root, /home or USB partition to another partition of the same hard drive called "Data" although the file is pasted, the image message appears (access denied) I click on "Skip all" and the message is deleted and in the source partition still shows the file, but if I try to delete it tells me that it does not exist. The same thing does not happen if I just copy and paste, it is only when cutting and pasting, this does not happen between the /root and /home partitions. I did a clean installation from zero and recreated the /root, /swap, /home and /data partitions and I install all the programs from MX file installer. What can it be and how to fix it? The same thing happened to me with MX 21 Beta 1 and 2

Translated with www.DeepL.com/Translator (free version)
You do not have the required permissions to view the files attached to this post.
No todos ignoramos las mismas cosas. :confused:
Top
Locked

Return to “General”