MX-21 RC1 feedback (Xfce)

Forum rules
Locked
Message
Author
User avatar
markol
Posts: 414
Joined: Sat Jan 30, 2021 8:33 am

Re: MX-21 RC1 feedback (Xfce)

#21 Post by markol »

I preferer KDE edition but this XFCE release is fantastic. Everything (and I really mean everything) worked out of the box except for some minor customization / fine tuning / OCD stuff :D
Top
SwampRabbit
Posts: 3602
Joined: Tue Jun 14, 2016 2:02 pm

Re: MX-21 RC1 feedback (Xfce)

#22 Post by SwampRabbit »

@markol by everything working OOTB, do you mean hardware? Can you please explain a bit more what worked OOTB for you so we can tell what we need to sustain moving forward?
If its hardware, care to share your QSI please? Thanks!
NEW USERS START HERE FAQS, MX Manual, and How to Break Your System - Don't use Ubuntu PPAs! Always post your Quick System Info (QSI) when asking for help.
Top
User avatar
Sigi
Posts: 132
Joined: Thu Mar 12, 2020 9:46 am

Re: MX-21 RC1 feedback (Xfce)

#23 Post by Sigi »

OK, after installation and update/upgrade, size of MX21-RC1.vdi is 6.7 GiB. But, default VirtualBox HDD size for Linux Debian 64 Bit (my default) is 8 GiB, on keep this default, MX 21-RC1 installation fails oi my system (MX 19.4) at 4 % with msg "Failed to prepare required partitions. Increase e.g. to 10 GiB (dynamic alloc), brings installation to end. On both Beta MX 21 this did not happen.
You do not have the required permissions to view the files attached to this post.
Top
bigbenaugust
Posts: 56
Joined: Wed Dec 20, 2017 9:41 am

Re: MX-21 RC1 feedback (Xfce)

#24 Post by bigbenaugust »

I installed B2 and then did an update, not realizing that RC1 was out.

If that's at all the same as RC1, I was able to confirm that Thunar SMB is indeed functional, at least to our Synology NAS (using smb://user@host/share syntax). It prompts for workgroup and password , then connects. Like Thunar has done since practically forever.

Seems to me someone was asking for UEFI install feedback, and that works, too.

I may grab an RC1 image and reinstall to try some disk partitioning things.
--Ben
Top
User avatar
dolphin_oracle
Developer
Posts: 22067
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-21 RC1 feedback (Xfce)

#25 Post by dolphin_oracle »

Sigi wrote: Wed Oct 06, 2021 11:50 am OK, after installation and update/upgrade, size of MX21-RC1.vdi is 6.7 GiB. But, default VirtualBox HDD size for Linux Debian 64 Bit (my default) is 8 GiB, on keep this default, MX 21-RC1 installation fails oi my system (MX 19.4) at 4 % with msg "Failed to prepare required partitions. Increase e.g. to 10 GiB (dynamic alloc), brings installation to end. On both Beta MX 21 this did not happen.
you are better off with the generic linux or linux/oracle than the debian presets. virtualbox doens't keep up with the times very well with those...
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
manyroads
Posts: 2657
Joined: Sat Jun 30, 2018 6:33 pm

Re: MX-21 RC1 feedback (Xfce)

#26 Post by manyroads »

It's probably too late for this... but given my weird MX use, I wanted to install thunar & thunar's dropbox plugin. I noticed that thunar is not available on MXPI Popular Packages list. :frown: xfce4 is also not available in the Desktop Environments area. :eek: :(
Pax vobiscum,
Mark Rabideau - ManyRoads Genealogy -or- eirenicon llc. (geeky stuff)
i3wm, bspwm, hlwm, dwm, spectrwm ~ Linux #449130
"For every complex problem there is an answer that is clear, simple, and wrong." -- H. L. Mencken
Top
User avatar
Sigi
Posts: 132
Joined: Thu Mar 12, 2020 9:46 am

Re: MX-21 RC1 feedback (Xfce)

#27 Post by Sigi »

dolphin_oracle wrote: Wed Oct 06, 2021 11:58 am you are better off with the generic linux or linux/oracle than the debian presets. virtualbox doens't keep up with the times very well with those...
Thanks, didn't know this. Ok, there is the default disk size 12 GiB.. 9_9
Top
Stuart_M
Posts: 691
Joined: Wed Aug 07, 2019 7:10 pm

Re: MX-21 RC1 feedback (Xfce)

#28 Post by Stuart_M »

mx-installer 21.10.03 in MX-21 will not install if the swap size is edited.

I am installing MX-21_rc1 in a 250GB SSD that is completely unallocated. The ISO integrity checked okay with both (sha256 and signature).

The installation was successful using the Template for an encrypted system, accepting all the default settings for a 250GB SSD. The resulting partition sizes are:
  • sda1 256.0 MB
  • sda2 512.0 MB
  • sda3 224.1 GB
  • sda4 8.0 GB
Here is the problem. I used the same Template and conditions that produced the successful installation above, but made just one change - the swap size was changed. I tried four different sizes, all producing the same error.
  • 512MB
  • 1000MB
  • 2GB
  • no swap (the swap partition was removed with the installer)
At the 9% mark ("Creating encrypted volume: sda3") an error message appears "Failed to prepare required partitions". (Note that the error was at the 10% mark when installing without swap.)
Install 9% Error.png
Below are two minstall.log files after a failed installation. After each failed installation I rebooted to start fresh.



The below is the minstall.log file after a failed installation with a 2GB swap size:

Code: Select all

2021-10-06 12:52:16.220 DBG default: Installer version: 21.10.03
2021-10-06 12:52:16.337 DBG default: +++ void MInstall::startup() +++
2021-10-06 12:52:16.342 DBG default: check for remastered home demo folder: false
2021-10-06 12:52:16.342 DBG default: Exec #1: du -sb /live/aufs/boot
2021-10-06 12:52:16.398 DBG default: Exit #1: 0 QProcess::NormalExit
2021-10-06 12:52:16.398 DBG default: linuxfs file is at :  "/live/boot-dev/antiX/linuxfs"
2021-10-06 12:52:16.398 DBG default: Exec #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2021-10-06 12:52:16.408 DBG default: Exit #2: 0 QProcess::NormalExit
2021-10-06 12:52:16.408 DBG default: linuxfs compression type is  "6" compression factor is  25
2021-10-06 12:52:16.408 DBG default: Exec #3: df /live/linux --output=used --total |tail -n1
2021-10-06 12:52:16.416 DBG default: Exit #3: 0 QProcess::NormalExit
2021-10-06 12:52:16.416 DBG default: linuxfs file size is  7312769024  rootfs file size is  0
2021-10-06 12:52:16.417 DBG default: Minimum space: 268435456 (boot), 8386510848 (root)
2021-10-06 12:52:16.417 DBG default: Exec #4: uname -m | grep -q i686
2021-10-06 12:52:16.423 DBG default: Exit #4: 1 QProcess::NormalExit
2021-10-06 12:52:16.423 DBG default: uefi = true
2021-10-06 12:52:16.423 DBG default: +++ void MInstall::setupAutoMount(bool) +++
2021-10-06 12:52:16.424 DBG default: Exec #5: ps -e | grep 'udisksd'
2021-10-06 12:52:16.443 DBG default: SOut #5: "   9459 ?        00:00:00 udisksd\n"
2021-10-06 12:52:16.443 DBG default: Exit #5: 0 QProcess::NormalExit
2021-10-06 12:52:16.443 DBG default: Exec #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-10-06 12:52:16.456 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2021-10-06 12:52:16.456 DBG default: Exit #6: 2 QProcess::NormalExit
2021-10-06 12:52:16.456 DBG default: Exec #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2021-10-06 12:52:16.465 DBG default: Exit #7: 1 QProcess::NormalExit
2021-10-06 12:52:16.466 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2021-10-06 12:52:16.466 DBG default: Exec #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-10-06 12:52:16.471 DBG default: Exit #8: 0 QProcess::NormalExit
2021-10-06 12:52:16.471 DBG default: Exec #9: udevadm control --reload
2021-10-06 12:52:16.480 DBG default: Exit #9: 0 QProcess::NormalExit
2021-10-06 12:52:16.480 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2021-10-06 12:52:16.490 DBG default: Exit #10: 0 QProcess::NormalExit
2021-10-06 12:52:16.490 DBG default: Exec #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2021-10-06 12:52:16.498 DBG default: Exit #11: 1 QProcess::NormalExit
2021-10-06 12:52:16.498 DBG default: check for possible snapshot: false
2021-10-06 12:52:16.561 DBG default: +++ void MInstall::setupkeyboardbutton() +++
2021-10-06 12:52:16.562 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2021-10-06 12:52:16.573 DBG default: Exit #12: 0 QProcess::NormalExit
2021-10-06 12:52:16.575 DBG default: Exec #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2021-10-06 12:52:16.583 DBG default: Exit #13: 0 QProcess::NormalExit
2021-10-06 12:52:16.584 DBG default: Exec #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2021-10-06 12:52:16.652 DBG default: Exit #14: 1 QProcess::NormalExit
2021-10-06 12:52:16.652 DBG default: Exec #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2021-10-06 12:52:16.682 DBG default: Exit #15: 0 QProcess::NormalExit
2021-10-06 12:52:16.682 DBG default: +++ void MInstall::buildServiceList() +++
2021-10-06 12:52:16.689 DBG default: +++ void MInstall::updatePartitionWidgets(bool) +++
2021-10-06 12:52:16.690 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-10-06 12:52:16.703 DBG default: Exit #16: 0 QProcess::NormalExit
2021-10-06 12:52:16.703 DBG default: Exec #17: partprobe -s
2021-10-06 12:52:16.837 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2 3 4\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 12:52:16.837 DBG default: Exit #17: 0 QProcess::NormalExit
2021-10-06 12:52:16.837 DBG default: Exec #18: blkid -c /dev/null
2021-10-06 12:52:16.877 DBG default: SOut #18: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"3213-3F0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"b6cb2e10-f793-4490-9e81-9c8b8c20c89e\"\n/dev/sda2: LABEL=\"boot\" UUID=\"5a269835-0830-44d2-b214-5156592c74fb\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"bda2eb7a-ead9-41a9-bc2c-31b28c620246\"\n/dev/sda3: UUID=\"3b4dbee4-1427-4894-8f3a-c71ae8b47122\" TYPE=\"crypto_LUKS\" PARTLABEL=\"primary\" PARTUUID=\"0a3ae745-f740-426f-a021-0ea6d42bb25f\"\n/dev/sda4: UUID=\"fa6d9afe-8c56-45d3-95f9-090c0ebd3088\" TYPE=\"crypto_LUKS\" PARTLABEL=\"primary\" PARTUUID=\"0b806862-b50e-40ab-abbc-e280f8cedbae\"\n/dev/sdb1: LABEL=\"MX-Live-usb\" UUID=\"69c12998-ac56-4e82-b3ff-7de8b4fc8d85\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"d79e0a2c-01\"\n/dev/sdb2: LABEL_FATBOOT=\"MX-UEFI\" LABEL=\"MX-UEFI\" UUID=\"2C9D-BF5D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"d79e0a2c-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-10-06 12:52:16.877 DBG default: Exit #18: 0 QProcess::NormalExit
2021-10-06 12:52:16.877 DBG default: Exec #19: parted -lm
2021-10-06 12:52:16.915 DBG default: Exit #19: 0 QProcess::NormalExit
2021-10-06 12:52:16.916 DBG default: Exec #20: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-10-06 12:52:16.925 DBG default: Exit #20: 32 QProcess::NormalExit
2021-10-06 12:52:21.989 DBG default: Exec #21: /usr/sbin/gparted
2021-10-06 12:52:34.405 DBG default: SOut #21: "GParted 1.2.0\nconfiguration --enable-libparted-dmraid --enable-online-resize\nlibparted 3.4\n"
2021-10-06 12:52:34.405 DBG default: Exit #21: 0 QProcess::NormalExit
2021-10-06 12:52:34.405 DBG default: +++ void MInstall::updatePartitionWidgets(bool) +++
2021-10-06 12:52:34.407 DBG default: Exec #22: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-10-06 12:52:34.415 DBG default: Exit #22: 0 QProcess::NormalExit
2021-10-06 12:52:34.415 DBG default: Exec #23: partprobe -s
2021-10-06 12:52:34.529 DBG default: SOut #23: "/dev/sda: gpt partitions\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 12:52:34.529 DBG default: Exit #23: 0 QProcess::NormalExit
2021-10-06 12:52:34.529 DBG default: Exec #24: blkid -c /dev/null
2021-10-06 12:52:34.569 DBG default: SOut #24: "/dev/sda: PTUUID=\"4ca2c105-553d-4a8b-b88b-6c1fff6b56a9\" PTTYPE=\"gpt\"\n/dev/sdb1: LABEL=\"MX-Live-usb\" UUID=\"69c12998-ac56-4e82-b3ff-7de8b4fc8d85\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"d79e0a2c-01\"\n/dev/sdb2: LABEL_FATBOOT=\"MX-UEFI\" LABEL=\"MX-UEFI\" UUID=\"2C9D-BF5D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"d79e0a2c-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-10-06 12:52:34.569 DBG default: Exit #24: 0 QProcess::NormalExit
2021-10-06 12:52:34.569 DBG default: Exec #25: parted -lm
2021-10-06 12:52:34.607 DBG default: Exit #25: 0 QProcess::NormalExit
2021-10-06 12:52:34.607 DBG default: Exec #26: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-10-06 12:52:34.617 DBG default: Exit #26: 32 QProcess::NormalExit
2021-10-06 12:53:13.967 DBG default: Mount points:
2021-10-06 12:53:13.968 DBG default:  - "/" - "sda3" "root.fsm" "/dev/mapper/root.fsm"
2021-10-06 12:53:13.968 DBG default:  - "/boot" - "sda2" "sda2" "/dev/sda2"
2021-10-06 12:53:13.968 DBG default:  - "SWAP" - "sda4" "swap" "/dev/mapper/swap"
2021-10-06 12:53:15.383 DBG default: +++ bool MInstall::saveHomeBasic() +++
2021-10-06 12:53:15.393 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 2822, resource id: 18885531, major code: 40 (TranslateCoords), minor code: 0
2021-10-06 12:53:15.420 DBG default: - Preparing to install MX Linux -
2021-10-06 12:53:15.422 DBG default: Exec #27: smartctl -H /dev/sda
2021-10-06 12:53:15.456 DBG default: SOut #27: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-8-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2021-10-06 12:53:15.456 DBG default: Exit #27: 0 QProcess::NormalExit
2021-10-06 12:53:15.456 DBG default: Exec #28: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2021-10-06 12:53:15.484 DBG default: Exit #28: 0 QProcess::NormalExit
2021-10-06 12:53:15.484 DBG default: +++ void MInstall::cleanup(bool) +++
2021-10-06 12:53:15.487 DBG default: Exec #29: /bin/umount -l /mnt/antiX/boot/efi
2021-10-06 12:53:15.497 DBG default: SErr #29: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2021-10-06 12:53:15.498 DBG default: Exit #29: 32 QProcess::NormalExit
2021-10-06 12:53:15.498 DBG default: Exec #30: /bin/umount -l /mnt/antiX/proc
2021-10-06 12:53:15.507 DBG default: SErr #30: "umount: /mnt/antiX/proc: no mount point specified.\n"
2021-10-06 12:53:15.507 DBG default: Exit #30: 32 QProcess::NormalExit
2021-10-06 12:53:15.507 DBG default: Exec #31: /bin/umount -l /mnt/antiX/sys
2021-10-06 12:53:15.516 DBG default: SErr #31: "umount: /mnt/antiX/sys: no mount point specified.\n"
2021-10-06 12:53:15.516 DBG default: Exit #31: 32 QProcess::NormalExit
2021-10-06 12:53:15.516 DBG default: Exec #32: /bin/umount -l /mnt/antiX/dev/shm
2021-10-06 12:53:15.523 DBG default: SErr #32: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2021-10-06 12:53:15.523 DBG default: Exit #32: 32 QProcess::NormalExit
2021-10-06 12:53:15.523 DBG default: Exec #33: /bin/umount -l /mnt/antiX/dev
2021-10-06 12:53:15.532 DBG default: SErr #33: "umount: /mnt/antiX/dev: no mount point specified.\n"
2021-10-06 12:53:15.532 DBG default: Exit #33: 32 QProcess::NormalExit
2021-10-06 12:53:15.532 DBG default: Exec #34: swapoff /dev/sda2
2021-10-06 12:53:15.543 DBG default: SErr #34: "swapoff: /dev/sda2: swapoff failed: No such file or directory\n"
2021-10-06 12:53:15.543 DBG default: Exit #34: 4 QProcess::NormalExit
2021-10-06 12:53:15.543 DBG default: Exec #35: /bin/umount -l /mnt/antiX/boot
2021-10-06 12:53:15.553 DBG default: SErr #35: "umount: /mnt/antiX/boot: no mount point specified.\n"
2021-10-06 12:53:15.553 DBG default: Exit #35: 32 QProcess::NormalExit
2021-10-06 12:53:15.553 DBG default: Exec #36: swapoff /dev/mapper/root.fsm
2021-10-06 12:53:15.562 DBG default: SErr #36: "swapoff: /dev/mapper/root.fsm: swapoff failed: No such file or directory\n"
2021-10-06 12:53:15.562 DBG default: Exit #36: 4 QProcess::NormalExit
2021-10-06 12:53:15.562 DBG default: Exec #37: /bin/umount -l /mnt/antiX/
2021-10-06 12:53:15.570 DBG default: SErr #37: "umount: /mnt/antiX/: no mount point specified.\n"
2021-10-06 12:53:15.571 DBG default: Exit #37: 32 QProcess::NormalExit
2021-10-06 12:53:15.571 DBG default: Exec #38: cryptsetup close /dev/mapper/root.fsm
2021-10-06 12:53:15.786 DBG default: SErr #38: "Device /dev/mapper/root.fsm is not active.\n"
2021-10-06 12:53:15.786 DBG default: Exit #38: 4 QProcess::NormalExit
2021-10-06 12:53:15.786 DBG default: +++ bool PartMan::preparePartitions() +++
2021-10-06 12:53:15.789 DBG default: Exec #39: lsblk -nro name /dev/sda
2021-10-06 12:53:15.798 DBG default: Exit #39: 0 QProcess::NormalExit
2021-10-06 12:53:15.798 DBG default: Exec #40: swapoff /dev/sda
2021-10-06 12:53:15.805 DBG default: SErr #40: "swapoff: /dev/sda: swapoff failed: Invalid argument\n"
2021-10-06 12:53:15.805 DBG default: Exit #40: 4 QProcess::NormalExit
2021-10-06 12:53:15.806 DBG default: Exec #41: /bin/umount /dev/sda
2021-10-06 12:53:15.814 DBG default: SErr #41: "umount: /dev/sda: not mounted.\n"
2021-10-06 12:53:15.814 DBG default: Exit #41: 32 QProcess::NormalExit
2021-10-06 12:53:15.814 DBG default: - Preparing partition tables -
2021-10-06 12:53:15.818 DBG default: Exec #42: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda
2021-10-06 12:53:15.831 DBG default: SErr #42: "64+0 records in\n64+0 records out\n4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.00343248 s, 1.2 GB/s\n"
2021-10-06 12:53:15.831 DBG default: Exit #42: 0 QProcess::NormalExit
2021-10-06 12:53:15.831 DBG default: Exec #43: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda seek=3815539
2021-10-06 12:53:15.839 DBG default: SErr #43: "dd: error writing '/dev/sda': No space left on device\n64+0 records in\n63+0 records out\n4186112 bytes (4.2 MB, 4.0 MiB) copied, 0.00186469 s, 2.2 GB/s\n"
2021-10-06 12:53:15.839 DBG default: Exit #43: 1 QProcess::NormalExit
2021-10-06 12:53:15.839 DBG default: Exec #44: parted -s /dev/sda mklabel gpt
2021-10-06 12:53:15.905 DBG default: Exit #44: 0 QProcess::NormalExit
2021-10-06 12:53:15.905 DBG default: - Preparing required partitions -
2021-10-06 12:53:15.910 DBG default: Exec #45: parted -s --align optimal /dev/sda mkpart primary 1MiB 257MiB
2021-10-06 12:53:15.965 DBG default: Exit #45: 0 QProcess::NormalExit
2021-10-06 12:53:15.969 DBG default: Exec #46: parted -s --align optimal /dev/sda mkpart primary 257MiB 769MiB
2021-10-06 12:53:16.045 DBG default: Exit #46: 0 QProcess::NormalExit
2021-10-06 12:53:16.049 DBG default: Exec #47: parted -s --align optimal /dev/sda mkpart primary 769MiB 230276MiB
2021-10-06 12:53:16.125 DBG default: Exit #47: 0 QProcess::NormalExit
2021-10-06 12:53:16.128 DBG default: Exec #48: parted -s --align optimal /dev/sda mkpart primary 230276MiB 232276MiB
2021-10-06 12:53:16.205 DBG default: Exit #48: 0 QProcess::NormalExit
2021-10-06 12:53:16.209 DBG default: Exec #49: parted -s /dev/sda set 2 legacy_boot on
2021-10-06 12:53:16.285 DBG default: Exit #49: 0 QProcess::NormalExit
2021-10-06 12:53:16.296 DBG default: Exec #50: partprobe -s
2021-10-06 12:53:16.429 DBG default: SOut #50: "/dev/sda: gpt partitions 1 2 3 4\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 12:53:16.429 DBG default: Exit #50: 0 QProcess::NormalExit
2021-10-06 12:53:16.429 DBG default: +++ bool PartMan::formatPartitions() +++
2021-10-06 12:53:16.433 DBG default: - Formatting: EFI System Partition -
2021-10-06 12:53:16.438 DBG default: Exec #51: mkfs.msdos -F 32 -n "EFI System" /dev/sda1
2021-10-06 12:53:16.497 DBG default: SOut #51: "mkfs.fat 4.2 (2021-01-31)\n"
2021-10-06 12:53:16.497 DBG default: SErr #51: "mkfs.fat: Warning: lowercase labels might not work properly on some systems\n"
2021-10-06 12:53:16.497 DBG default: Exit #51: 0 QProcess::NormalExit
2021-10-06 12:53:16.498 DBG default: Exec #52: parted -s /dev/sda set 1 esp on
2021-10-06 12:53:16.641 DBG default: Exit #52: 0 QProcess::NormalExit
2021-10-06 12:53:16.641 DBG default: - Formatting: /boot -
2021-10-06 12:53:16.646 DBG default: Exec #53: mkfs.ext4 -F /dev/sda2 -L "boot"
2021-10-06 12:53:16.713 DBG default: SOut #53: "Discarding device blocks:   4096/131072\b\b\b\b\b\b\b\b\b\b\b\b\b             \b\b\b\b\b\b\b\b\b\b\b\b\bdone                            \nCreating filesystem with 131072 4k blocks and 32768 inodes\nFilesystem UUID: ad312201-fcc2-4d65-8fb9-592efeab0748\nSuperblock backups stored on blocks: \n\t32768, 98304\n\nAllocating group tables: 0/4\b\b\b   \b\b\bdone                            \nWriting inode tables: 0/4\b\b\b   \b\b\bdone                            \nCreating journal (4096 blocks): done\nWriting superblocks and filesystem accounting information: 0/4\b\b\b   \b\b\bdone\n\n"
2021-10-06 12:53:16.713 DBG default: SErr #53: "mke2fs 1.46.2 (28-Feb-2021)\n"
2021-10-06 12:53:16.713 DBG default: Exit #53: 0 QProcess::NormalExit
2021-10-06 12:53:16.713 DBG default: Exec #54: /sbin/tune2fs -c0 -C0 -i1m /dev/sda2
2021-10-06 12:53:16.729 DBG default: SOut #54: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2021-10-06 12:53:16.729 DBG default: Exit #54: 0 QProcess::NormalExit
2021-10-06 12:53:16.729 DBG default: - Creating encrypted volume: sda3 -
2021-10-06 12:53:16.738 DBG default: Exec #55: cryptsetup --batch-mode --key-size 512 --hash sha512 --pbkdf argon2id --sector-size=1358828544 luksFormat /dev/sda3
2021-10-06 12:53:16.747 DBG default: SErr #55: "Usage: cryptsetup [-?Vvyrq] [-?|--help] [--usage] [-V|--version]\n        [-v|--verbose] [--debug] [--debug-json] [-c|--cipher=STRING]\n        [-h|--hash=STRING] [-y|--verify-passphrase] [-d|--key-file=STRING]\n        [--master-key-file=STRING] [--dump-master-key] [-s|--key-size=BITS]\n        [-l|--keyfile-size=bytes] [--keyfile-offset=bytes]\n        [--new-keyfile-size=bytes] [--new-keyfile-offset=bytes]\n        [-S|--key-slot=INT] [-b|--size=SECTORS] [--device-size=bytes]\n        [-o|--offset=SECTORS] [-p|--skip=SECTORS] [-r|--readonly]\n        [-q|--batch-mode] [-t|--timeout=secs] [--progress-frequency=secs]\n        [-T|--tries=INT] [--align-payload=SECTORS]\n        [--header-backup-file=STRING] [--use-random] [--use-urandom]\n        [--shared] [--uuid=STRING] [--allow-discards] [--header=STRING]\n        [--test-passphrase] [--tcrypt-hidden] [--tcrypt-system]\n        [--tcrypt-backup] [--veracrypt] [--veracrypt-pim=INT]\n        [--veracrypt-query-pim] [-M|--type=STRING] [--force-password]\n        [--perf-same_cpu_crypt] [--perf-submit_from_crypt_cpus]\n        [--perf-no_read_workqueue] [--perf-no_write_workqueue] [--deferred]\n        [--serialize-memory-hard-pbkdf] [-i|--iter-time=msecs]\n        [--pbkdf=STRING] [--pbkdf-memory=kilobytes]\n        [--pbkdf-parallel=threads] [--pbkdf-force-iterations=LONG]\n        [--priority=STRING] [--disable-locks] [--disable-keyring]\n        [-I|--integrity=STRING] [--integrity-no-journal]\n        [--integrity-no-wipe] [--integrity-legacy-padding] [--token-only]\n        [--token-id=INT] [--key-description=STRING] [--sector-size=INT]\n        [--iv-large-sectors] [--persistent] [--label=STRING]\n        [--subsystem=STRING] [--unbound] [--json-file=STRING]\n        [--luks2-metadata-size=bytes] [--luks2-keyslots-size=bytes]\n        [--refresh] [--keyslot-key-size=BITS] [--keyslot-cipher=STRING]\n        [--encrypt] [--decrypt] [--init-only] [--resume-only]\n        [--reduce-device-size=bytes] [--hotzone-size=bytes]\n        [--resilience=STRING] [--resilience-hash=STRING]\n        [--active-name=STRING] [OPTION...] <action> <action-specific>\n/usr/sbin/cryptsetup: Unsupported encryption sector size.\n"
2021-10-06 12:53:16.747 DBG default: Exit #55: 1 QProcess::NormalExit
2021-10-06 12:53:16.747 DBG default: +++ void MInstall::failUI(const QString&) +++
2021-10-06 12:53:16.750 DBG default: Phase 1 - "Failed to prepare required partitions."


The below is the minstall.log file after a failed installation without swap:

Code: Select all

2021-10-06 12:59:50.284 DBG default: Installer version: 21.10.03
2021-10-06 12:59:50.395 DBG default: +++ void MInstall::startup() +++
2021-10-06 12:59:50.399 DBG default: check for remastered home demo folder: false
2021-10-06 12:59:50.399 DBG default: Exec #1: du -sb /live/aufs/boot
2021-10-06 12:59:50.452 DBG default: Exit #1: 0 QProcess::NormalExit
2021-10-06 12:59:50.452 DBG default: linuxfs file is at :  "/live/boot-dev/antiX/linuxfs"
2021-10-06 12:59:50.452 DBG default: Exec #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2021-10-06 12:59:50.462 DBG default: Exit #2: 0 QProcess::NormalExit
2021-10-06 12:59:50.462 DBG default: linuxfs compression type is  "6" compression factor is  25
2021-10-06 12:59:50.463 DBG default: Exec #3: df /live/linux --output=used --total |tail -n1
2021-10-06 12:59:50.470 DBG default: Exit #3: 0 QProcess::NormalExit
2021-10-06 12:59:50.471 DBG default: linuxfs file size is  7312769024  rootfs file size is  0
2021-10-06 12:59:50.471 DBG default: Minimum space: 268435456 (boot), 8386510848 (root)
2021-10-06 12:59:50.471 DBG default: Exec #4: uname -m | grep -q i686
2021-10-06 12:59:50.478 DBG default: Exit #4: 1 QProcess::NormalExit
2021-10-06 12:59:50.478 DBG default: uefi = true
2021-10-06 12:59:50.478 DBG default: +++ void MInstall::setupAutoMount(bool) +++
2021-10-06 12:59:50.479 DBG default: Exec #5: ps -e | grep 'udisksd'
2021-10-06 12:59:50.493 DBG default: SOut #5: "   9366 ?        00:00:00 udisksd\n"
2021-10-06 12:59:50.493 DBG default: Exit #5: 0 QProcess::NormalExit
2021-10-06 12:59:50.493 DBG default: Exec #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-10-06 12:59:50.509 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2021-10-06 12:59:50.509 DBG default: Exit #6: 2 QProcess::NormalExit
2021-10-06 12:59:50.509 DBG default: Exec #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2021-10-06 12:59:50.517 DBG default: Exit #7: 1 QProcess::NormalExit
2021-10-06 12:59:50.518 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2021-10-06 12:59:50.518 DBG default: Exec #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-10-06 12:59:50.522 DBG default: Exit #8: 0 QProcess::NormalExit
2021-10-06 12:59:50.522 DBG default: Exec #9: udevadm control --reload
2021-10-06 12:59:50.533 DBG default: Exit #9: 0 QProcess::NormalExit
2021-10-06 12:59:50.533 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2021-10-06 12:59:50.542 DBG default: Exit #10: 0 QProcess::NormalExit
2021-10-06 12:59:50.542 DBG default: Exec #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2021-10-06 12:59:50.548 DBG default: Exit #11: 1 QProcess::NormalExit
2021-10-06 12:59:50.548 DBG default: check for possible snapshot: false
2021-10-06 12:59:50.606 DBG default: +++ void MInstall::setupkeyboardbutton() +++
2021-10-06 12:59:50.608 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2021-10-06 12:59:50.618 DBG default: Exit #12: 0 QProcess::NormalExit
2021-10-06 12:59:50.622 DBG default: Exec #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2021-10-06 12:59:50.633 DBG default: Exit #13: 0 QProcess::NormalExit
2021-10-06 12:59:50.634 DBG default: Exec #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2021-10-06 12:59:50.702 DBG default: Exit #14: 1 QProcess::NormalExit
2021-10-06 12:59:50.702 DBG default: Exec #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2021-10-06 12:59:50.730 DBG default: Exit #15: 0 QProcess::NormalExit
2021-10-06 12:59:50.730 DBG default: +++ void MInstall::buildServiceList() +++
2021-10-06 12:59:50.734 DBG default: +++ void MInstall::updatePartitionWidgets(bool) +++
2021-10-06 12:59:50.734 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-10-06 12:59:50.747 DBG default: Exit #16: 0 QProcess::NormalExit
2021-10-06 12:59:50.748 DBG default: Exec #17: partprobe -s
2021-10-06 12:59:50.871 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2 3\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 12:59:50.871 DBG default: Exit #17: 0 QProcess::NormalExit
2021-10-06 12:59:50.871 DBG default: Exec #18: blkid -c /dev/null
2021-10-06 12:59:50.911 DBG default: SOut #18: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"5916-AAC4\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"6523564d-16d9-4611-ad78-b3b42dad3449\"\n/dev/sda2: LABEL=\"boot\" UUID=\"1c1acc9d-b433-48ca-b650-620dd85eb9a4\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"2c957374-cb60-4f5e-b7be-c45ebdb2fb82\"\n/dev/sda3: UUID=\"3b4dbee4-1427-4894-8f3a-c71ae8b47122\" TYPE=\"crypto_LUKS\" PARTLABEL=\"primary\" PARTUUID=\"315647f8-f2ca-4e4a-a4b8-b761774acc54\"\n/dev/sdb1: LABEL=\"MX-Live-usb\" UUID=\"69c12998-ac56-4e82-b3ff-7de8b4fc8d85\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"d79e0a2c-01\"\n/dev/sdb2: LABEL_FATBOOT=\"MX-UEFI\" LABEL=\"MX-UEFI\" UUID=\"2C9D-BF5D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"d79e0a2c-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-10-06 12:59:50.911 DBG default: Exit #18: 0 QProcess::NormalExit
2021-10-06 12:59:50.911 DBG default: Exec #19: parted -lm
2021-10-06 12:59:50.961 DBG default: Exit #19: 0 QProcess::NormalExit
2021-10-06 12:59:50.961 DBG default: Exec #20: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-10-06 12:59:50.970 DBG default: Exit #20: 32 QProcess::NormalExit
2021-10-06 13:00:08.882 DBG default: Exec #21: /usr/sbin/gparted
2021-10-06 13:00:22.308 DBG default: SOut #21: "GParted 1.2.0\nconfiguration --enable-libparted-dmraid --enable-online-resize\nlibparted 3.4\n"
2021-10-06 13:00:22.308 DBG default: Exit #21: 0 QProcess::NormalExit
2021-10-06 13:00:22.308 DBG default: +++ void MInstall::updatePartitionWidgets(bool) +++
2021-10-06 13:00:22.310 DBG default: Exec #22: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-10-06 13:00:22.317 DBG default: Exit #22: 0 QProcess::NormalExit
2021-10-06 13:00:22.317 DBG default: Exec #23: partprobe -s
2021-10-06 13:00:22.407 DBG default: SOut #23: "/dev/sda: gpt partitions\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 13:00:22.407 DBG default: Exit #23: 0 QProcess::NormalExit
2021-10-06 13:00:22.407 DBG default: Exec #24: blkid -c /dev/null
2021-10-06 13:00:22.447 DBG default: SOut #24: "/dev/sda: PTUUID=\"2b9b6f10-a554-42f5-a3bc-95778e1afffa\" PTTYPE=\"gpt\"\n/dev/sdb1: LABEL=\"MX-Live-usb\" UUID=\"69c12998-ac56-4e82-b3ff-7de8b4fc8d85\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"d79e0a2c-01\"\n/dev/sdb2: LABEL_FATBOOT=\"MX-UEFI\" LABEL=\"MX-UEFI\" UUID=\"2C9D-BF5D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"d79e0a2c-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-10-06 13:00:22.447 DBG default: Exit #24: 0 QProcess::NormalExit
2021-10-06 13:00:22.447 DBG default: Exec #25: parted -lm
2021-10-06 13:00:22.482 DBG default: Exit #25: 0 QProcess::NormalExit
2021-10-06 13:00:22.482 DBG default: Exec #26: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-10-06 13:00:22.493 DBG default: Exit #26: 32 QProcess::NormalExit
2021-10-06 13:02:11.854 DBG default: Mount points:
2021-10-06 13:02:11.854 DBG default:  - "/" - "sda3" "root.fsm" "/dev/mapper/root.fsm"
2021-10-06 13:02:11.854 DBG default:  - "/boot" - "sda2" "sda2" "/dev/sda2"
2021-10-06 13:02:13.260 DBG default: +++ bool MInstall::saveHomeBasic() +++
2021-10-06 13:02:13.272 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 4257, resource id: 18887372, major code: 40 (TranslateCoords), minor code: 0
2021-10-06 13:02:13.301 DBG default: - Preparing to install MX Linux -
2021-10-06 13:02:13.303 DBG default: Exec #27: smartctl -H /dev/sda
2021-10-06 13:02:13.339 DBG default: SOut #27: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-8-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2021-10-06 13:02:13.339 DBG default: Exit #27: 0 QProcess::NormalExit
2021-10-06 13:02:13.339 DBG default: Exec #28: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2021-10-06 13:02:13.367 DBG default: Exit #28: 0 QProcess::NormalExit
2021-10-06 13:02:13.367 DBG default: +++ void MInstall::cleanup(bool) +++
2021-10-06 13:02:13.368 DBG default: Exec #29: /bin/umount -l /mnt/antiX/boot/efi
2021-10-06 13:02:13.377 DBG default: SErr #29: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2021-10-06 13:02:13.377 DBG default: Exit #29: 32 QProcess::NormalExit
2021-10-06 13:02:13.377 DBG default: Exec #30: /bin/umount -l /mnt/antiX/proc
2021-10-06 13:02:13.385 DBG default: SErr #30: "umount: /mnt/antiX/proc: no mount point specified.\n"
2021-10-06 13:02:13.385 DBG default: Exit #30: 32 QProcess::NormalExit
2021-10-06 13:02:13.385 DBG default: Exec #31: /bin/umount -l /mnt/antiX/sys
2021-10-06 13:02:13.393 DBG default: SErr #31: "umount: /mnt/antiX/sys: no mount point specified.\n"
2021-10-06 13:02:13.393 DBG default: Exit #31: 32 QProcess::NormalExit
2021-10-06 13:02:13.393 DBG default: Exec #32: /bin/umount -l /mnt/antiX/dev/shm
2021-10-06 13:02:13.401 DBG default: SErr #32: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2021-10-06 13:02:13.401 DBG default: Exit #32: 32 QProcess::NormalExit
2021-10-06 13:02:13.401 DBG default: Exec #33: /bin/umount -l /mnt/antiX/dev
2021-10-06 13:02:13.408 DBG default: SErr #33: "umount: /mnt/antiX/dev: no mount point specified.\n"
2021-10-06 13:02:13.408 DBG default: Exit #33: 32 QProcess::NormalExit
2021-10-06 13:02:13.408 DBG default: Exec #34: swapoff /dev/sda2
2021-10-06 13:02:13.419 DBG default: SErr #34: "swapoff: /dev/sda2: swapoff failed: No such file or directory\n"
2021-10-06 13:02:13.419 DBG default: Exit #34: 4 QProcess::NormalExit
2021-10-06 13:02:13.419 DBG default: Exec #35: /bin/umount -l /mnt/antiX/boot
2021-10-06 13:02:13.428 DBG default: SErr #35: "umount: /mnt/antiX/boot: no mount point specified.\n"
2021-10-06 13:02:13.428 DBG default: Exit #35: 32 QProcess::NormalExit
2021-10-06 13:02:13.428 DBG default: Exec #36: swapoff /dev/mapper/root.fsm
2021-10-06 13:02:13.436 DBG default: SErr #36: "swapoff: /dev/mapper/root.fsm: swapoff failed: No such file or directory\n"
2021-10-06 13:02:13.436 DBG default: Exit #36: 4 QProcess::NormalExit
2021-10-06 13:02:13.436 DBG default: Exec #37: /bin/umount -l /mnt/antiX/
2021-10-06 13:02:13.446 DBG default: SErr #37: "umount: /mnt/antiX/: no mount point specified.\n"
2021-10-06 13:02:13.446 DBG default: Exit #37: 32 QProcess::NormalExit
2021-10-06 13:02:13.446 DBG default: Exec #38: cryptsetup close /dev/mapper/root.fsm
2021-10-06 13:02:13.674 DBG default: SErr #38: "Device /dev/mapper/root.fsm is not active.\n"
2021-10-06 13:02:13.674 DBG default: Exit #38: 4 QProcess::NormalExit
2021-10-06 13:02:13.674 DBG default: +++ bool PartMan::preparePartitions() +++
2021-10-06 13:02:13.677 DBG default: Exec #39: lsblk -nro name /dev/sda
2021-10-06 13:02:13.685 DBG default: Exit #39: 0 QProcess::NormalExit
2021-10-06 13:02:13.685 DBG default: Exec #40: swapoff /dev/sda
2021-10-06 13:02:13.692 DBG default: SErr #40: "swapoff: /dev/sda: swapoff failed: Invalid argument\n"
2021-10-06 13:02:13.693 DBG default: Exit #40: 4 QProcess::NormalExit
2021-10-06 13:02:13.693 DBG default: Exec #41: /bin/umount /dev/sda
2021-10-06 13:02:13.701 DBG default: SErr #41: "umount: /dev/sda: not mounted.\n"
2021-10-06 13:02:13.701 DBG default: Exit #41: 32 QProcess::NormalExit
2021-10-06 13:02:13.701 DBG default: - Preparing partition tables -
2021-10-06 13:02:13.705 DBG default: Exec #42: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda
2021-10-06 13:02:13.727 DBG default: SErr #42: "64+0 records in\n64+0 records out\n4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.012817 s, 327 MB/s\n"
2021-10-06 13:02:13.727 DBG default: Exit #42: 0 QProcess::NormalExit
2021-10-06 13:02:13.727 DBG default: Exec #43: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda seek=3815539
2021-10-06 13:02:13.739 DBG default: SErr #43: "dd: error writing '/dev/sda': No space left on device\n64+0 records in\n63+0 records out\n4186112 bytes (4.2 MB, 4.0 MiB) copied, 0.00190751 s, 2.2 GB/s\n"
2021-10-06 13:02:13.739 DBG default: Exit #43: 1 QProcess::NormalExit
2021-10-06 13:02:13.739 DBG default: Exec #44: parted -s /dev/sda mklabel gpt
2021-10-06 13:02:13.795 DBG default: Exit #44: 0 QProcess::NormalExit
2021-10-06 13:02:13.795 DBG default: - Preparing required partitions -
2021-10-06 13:02:13.802 DBG default: Exec #45: parted -s --align optimal /dev/sda mkpart primary 1MiB 257MiB
2021-10-06 13:02:13.855 DBG default: Exit #45: 0 QProcess::NormalExit
2021-10-06 13:02:13.859 DBG default: Exec #46: parted -s --align optimal /dev/sda mkpart primary 257MiB 769MiB
2021-10-06 13:02:13.931 DBG default: Exit #46: 0 QProcess::NormalExit
2021-10-06 13:02:13.935 DBG default: Exec #47: parted -s --align optimal /dev/sda mkpart primary 769MiB 238468MiB
2021-10-06 13:02:14.007 DBG default: Exit #47: 0 QProcess::NormalExit
2021-10-06 13:02:14.014 DBG default: Exec #48: parted -s /dev/sda set 2 legacy_boot on
2021-10-06 13:02:14.088 DBG default: Exit #48: 0 QProcess::NormalExit
2021-10-06 13:02:14.095 DBG default: Exec #49: partprobe -s
2021-10-06 13:02:14.219 DBG default: SOut #49: "/dev/sda: gpt partitions 1 2 3\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 13:02:14.219 DBG default: Exit #49: 0 QProcess::NormalExit
2021-10-06 13:02:14.219 DBG default: +++ bool PartMan::formatPartitions() +++
2021-10-06 13:02:14.223 DBG default: - Formatting: EFI System Partition -
2021-10-06 13:02:14.231 DBG default: Exec #50: mkfs.msdos -F 32 -n "EFI System" /dev/sda1
2021-10-06 13:02:14.295 DBG default: SOut #50: "mkfs.fat 4.2 (2021-01-31)\n"
2021-10-06 13:02:14.296 DBG default: SErr #50: "mkfs.fat: Warning: lowercase labels might not work properly on some systems\n"
2021-10-06 13:02:14.296 DBG default: Exit #50: 0 QProcess::NormalExit
2021-10-06 13:02:14.296 DBG default: Exec #51: parted -s /dev/sda set 1 esp on
2021-10-06 13:02:14.344 DBG default: Exit #51: 0 QProcess::NormalExit
2021-10-06 13:02:14.344 DBG default: - Formatting: /boot -
2021-10-06 13:02:14.351 DBG default: Exec #52: mkfs.ext4 -F /dev/sda2 -L "boot"
2021-10-06 13:02:14.423 DBG default: SOut #52: "Discarding device blocks:   4096/131072\b\b\b\b\b\b\b\b\b\b\b\b\b             \b\b\b\b\b\b\b\b\b\b\b\b\bdone                            \nCreating filesystem with 131072 4k blocks and 32768 inodes\nFilesystem UUID: 153d3647-0d8e-4d59-9f41-0e4799cdfc32\nSuperblock backups stored on blocks: \n\t32768, 98304\n\nAllocating group tables: 0/4\b\b\b   \b\b\bdone                            \nWriting inode tables: 0/4\b\b\b   \b\b\bdone                            \nCreating journal (4096 blocks): done\nWriting superblocks and filesystem accounting information: 0/4\b\b\b   \b\b\bdone\n\n"
2021-10-06 13:02:14.423 DBG default: SErr #52: "mke2fs 1.46.2 (28-Feb-2021)\n"
2021-10-06 13:02:14.423 DBG default: Exit #52: 0 QProcess::NormalExit
2021-10-06 13:02:14.423 DBG default: Exec #53: /sbin/tune2fs -c0 -C0 -i1m /dev/sda2
2021-10-06 13:02:14.439 DBG default: SOut #53: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2021-10-06 13:02:14.439 DBG default: Exit #53: 0 QProcess::NormalExit
2021-10-06 13:02:14.439 DBG default: - Creating encrypted volume: sda3 -
2021-10-06 13:02:14.446 DBG default: Exec #54: cryptsetup --batch-mode --key-size 512 --hash sha512 --pbkdf argon2id --sector-size=353437696 luksFormat /dev/sda3
2021-10-06 13:02:14.457 DBG default: SErr #54: "Usage: cryptsetup [-?Vvyrq] [-?|--help] [--usage] [-V|--version]\n        [-v|--verbose] [--debug] [--debug-json] [-c|--cipher=STRING]\n        [-h|--hash=STRING] [-y|--verify-passphrase] [-d|--key-file=STRING]\n        [--master-key-file=STRING] [--dump-master-key] [-s|--key-size=BITS]\n        [-l|--keyfile-size=bytes] [--keyfile-offset=bytes]\n        [--new-keyfile-size=bytes] [--new-keyfile-offset=bytes]\n        [-S|--key-slot=INT] [-b|--size=SECTORS] [--device-size=bytes]\n        [-o|--offset=SECTORS] [-p|--skip=SECTORS] [-r|--readonly]\n        [-q|--batch-mode] [-t|--timeout=secs] [--progress-frequency=secs]\n        [-T|--tries=INT] [--align-payload=SECTORS]\n        [--header-backup-file=STRING] [--use-random] [--use-urandom]\n        [--shared] [--uuid=STRING] [--allow-discards] [--header=STRING]\n        [--test-passphrase] [--tcrypt-hidden] [--tcrypt-system]\n        [--tcrypt-backup] [--veracrypt] [--veracrypt-pim=INT]\n        [--veracrypt-query-pim] [-M|--type=STRING] [--force-password]\n        [--perf-same_cpu_crypt] [--perf-submit_from_crypt_cpus]\n        [--perf-no_read_workqueue] [--perf-no_write_workqueue] [--deferred]\n        [--serialize-memory-hard-pbkdf] [-i|--iter-time=msecs]\n        [--pbkdf=STRING] [--pbkdf-memory=kilobytes]\n        [--pbkdf-parallel=threads] [--pbkdf-force-iterations=LONG]\n        [--priority=STRING] [--disable-locks] [--disable-keyring]\n        [-I|--integrity=STRING] [--integrity-no-journal]\n        [--integrity-no-wipe] [--integrity-legacy-padding] [--token-only]\n        [--token-id=INT] [--key-description=STRING] [--sector-size=INT]\n        [--iv-large-sectors] [--persistent] [--label=STRING]\n        [--subsystem=STRING] [--unbound] [--json-file=STRING]\n        [--luks2-metadata-size=bytes] [--luks2-keyslots-size=bytes]\n        [--refresh] [--keyslot-key-size=BITS] [--keyslot-cipher=STRING]\n        [--encrypt] [--decrypt] [--init-only] [--resume-only]\n        [--reduce-device-size=bytes] [--hotzone-size=bytes]\n        [--resilience=STRING] [--resilience-hash=STRING]\n        [--active-name=STRING] [OPTION...] <action> <action-specific>\n/usr/sbin/cryptsetup: Unsupported encryption sector size.\n"
2021-10-06 13:02:14.457 DBG default: Exit #54: 1 QProcess::NormalExit
2021-10-06 13:02:14.457 DBG default: +++ void MInstall::failUI(const QString&) +++
2021-10-06 13:02:14.463 DBG default: Phase 1 - "Failed to prepare required partitions."
By the way, MX-21_beta2 installed fine.

Edit1 (6 October 2021): About an hour after I posted this I did a short test using mx-installer 21.10.04 to install using 512 MB of swap and the problem remains (that is the latest version as of this posting).

Edit2 (8 October 2021): I made a successful installation without any swap by eliminating the swap partition with the installer. Even though I did not test the other swap sizes mentioned above, I presume the problem was resolved with mx-installer 21.10.05 (dolphin_oracle said he though the issue was was found (viewtopic.php?p=655964#p655964)).
You do not have the required permissions to view the files attached to this post.
Last edited by Stuart_M on Fri Oct 08, 2021 10:34 am, edited 2 times in total.
Top
User avatar
dolphin_oracle
Developer
Posts: 22067
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-21 RC1 feedback (Xfce)

#29 Post by dolphin_oracle »

Stuart_M wrote: Wed Oct 06, 2021 2:03 pm mx-installer 21.10.03 in MX-21 will not install if the swap size is edited.

I am installing MX-21_rc1 in a 250GB SSD that is completely unallocated. The ISO integrity checked okay with both (sha256 and signature).

The installation was successful using the Template for an encrypted system, accepting all the default settings for a 250GB SSD. The resulting partition sizes are:
  • sda1 256.0 MB
  • sda2 512.0 MB
  • sda3 224.1 GB
  • sda4 8.0 GB
Here is the problem. I used the same Template and conditions that produced the successful installation above, but made just one change - the swap size was changed. I tried four different sizes, all producing the same error.
  • 512MB
  • 1000MB
  • 2GB
  • no swap (the swap partition was removed with the installer)
At the 9% mark ("Creating encrypted volume: sda3") an error message appears "Failed to prepare required partitions". (Note that the error was at the 10% mark when installing without swap.)Install 9% Error.png

Below are two minstall.log files after a failed installation. After each failed installation I rebooted to start fresh.



The below is the minstall.log file after a failed installation with a 2GB swap size:

Code: Select all

2021-10-06 12:52:16.220 DBG default: Installer version: 21.10.03
2021-10-06 12:52:16.337 DBG default: +++ void MInstall::startup() +++
2021-10-06 12:52:16.342 DBG default: check for remastered home demo folder: false
2021-10-06 12:52:16.342 DBG default: Exec #1: du -sb /live/aufs/boot
2021-10-06 12:52:16.398 DBG default: Exit #1: 0 QProcess::NormalExit
2021-10-06 12:52:16.398 DBG default: linuxfs file is at :  "/live/boot-dev/antiX/linuxfs"
2021-10-06 12:52:16.398 DBG default: Exec #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2021-10-06 12:52:16.408 DBG default: Exit #2: 0 QProcess::NormalExit
2021-10-06 12:52:16.408 DBG default: linuxfs compression type is  "6" compression factor is  25
2021-10-06 12:52:16.408 DBG default: Exec #3: df /live/linux --output=used --total |tail -n1
2021-10-06 12:52:16.416 DBG default: Exit #3: 0 QProcess::NormalExit
2021-10-06 12:52:16.416 DBG default: linuxfs file size is  7312769024  rootfs file size is  0
2021-10-06 12:52:16.417 DBG default: Minimum space: 268435456 (boot), 8386510848 (root)
2021-10-06 12:52:16.417 DBG default: Exec #4: uname -m | grep -q i686
2021-10-06 12:52:16.423 DBG default: Exit #4: 1 QProcess::NormalExit
2021-10-06 12:52:16.423 DBG default: uefi = true
2021-10-06 12:52:16.423 DBG default: +++ void MInstall::setupAutoMount(bool) +++
2021-10-06 12:52:16.424 DBG default: Exec #5: ps -e | grep 'udisksd'
2021-10-06 12:52:16.443 DBG default: SOut #5: "   9459 ?        00:00:00 udisksd\n"
2021-10-06 12:52:16.443 DBG default: Exit #5: 0 QProcess::NormalExit
2021-10-06 12:52:16.443 DBG default: Exec #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-10-06 12:52:16.456 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2021-10-06 12:52:16.456 DBG default: Exit #6: 2 QProcess::NormalExit
2021-10-06 12:52:16.456 DBG default: Exec #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2021-10-06 12:52:16.465 DBG default: Exit #7: 1 QProcess::NormalExit
2021-10-06 12:52:16.466 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2021-10-06 12:52:16.466 DBG default: Exec #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-10-06 12:52:16.471 DBG default: Exit #8: 0 QProcess::NormalExit
2021-10-06 12:52:16.471 DBG default: Exec #9: udevadm control --reload
2021-10-06 12:52:16.480 DBG default: Exit #9: 0 QProcess::NormalExit
2021-10-06 12:52:16.480 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2021-10-06 12:52:16.490 DBG default: Exit #10: 0 QProcess::NormalExit
2021-10-06 12:52:16.490 DBG default: Exec #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2021-10-06 12:52:16.498 DBG default: Exit #11: 1 QProcess::NormalExit
2021-10-06 12:52:16.498 DBG default: check for possible snapshot: false
2021-10-06 12:52:16.561 DBG default: +++ void MInstall::setupkeyboardbutton() +++
2021-10-06 12:52:16.562 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2021-10-06 12:52:16.573 DBG default: Exit #12: 0 QProcess::NormalExit
2021-10-06 12:52:16.575 DBG default: Exec #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2021-10-06 12:52:16.583 DBG default: Exit #13: 0 QProcess::NormalExit
2021-10-06 12:52:16.584 DBG default: Exec #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2021-10-06 12:52:16.652 DBG default: Exit #14: 1 QProcess::NormalExit
2021-10-06 12:52:16.652 DBG default: Exec #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2021-10-06 12:52:16.682 DBG default: Exit #15: 0 QProcess::NormalExit
2021-10-06 12:52:16.682 DBG default: +++ void MInstall::buildServiceList() +++
2021-10-06 12:52:16.689 DBG default: +++ void MInstall::updatePartitionWidgets(bool) +++
2021-10-06 12:52:16.690 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-10-06 12:52:16.703 DBG default: Exit #16: 0 QProcess::NormalExit
2021-10-06 12:52:16.703 DBG default: Exec #17: partprobe -s
2021-10-06 12:52:16.837 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2 3 4\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 12:52:16.837 DBG default: Exit #17: 0 QProcess::NormalExit
2021-10-06 12:52:16.837 DBG default: Exec #18: blkid -c /dev/null
2021-10-06 12:52:16.877 DBG default: SOut #18: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"3213-3F0E\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"b6cb2e10-f793-4490-9e81-9c8b8c20c89e\"\n/dev/sda2: LABEL=\"boot\" UUID=\"5a269835-0830-44d2-b214-5156592c74fb\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"bda2eb7a-ead9-41a9-bc2c-31b28c620246\"\n/dev/sda3: UUID=\"3b4dbee4-1427-4894-8f3a-c71ae8b47122\" TYPE=\"crypto_LUKS\" PARTLABEL=\"primary\" PARTUUID=\"0a3ae745-f740-426f-a021-0ea6d42bb25f\"\n/dev/sda4: UUID=\"fa6d9afe-8c56-45d3-95f9-090c0ebd3088\" TYPE=\"crypto_LUKS\" PARTLABEL=\"primary\" PARTUUID=\"0b806862-b50e-40ab-abbc-e280f8cedbae\"\n/dev/sdb1: LABEL=\"MX-Live-usb\" UUID=\"69c12998-ac56-4e82-b3ff-7de8b4fc8d85\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"d79e0a2c-01\"\n/dev/sdb2: LABEL_FATBOOT=\"MX-UEFI\" LABEL=\"MX-UEFI\" UUID=\"2C9D-BF5D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"d79e0a2c-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-10-06 12:52:16.877 DBG default: Exit #18: 0 QProcess::NormalExit
2021-10-06 12:52:16.877 DBG default: Exec #19: parted -lm
2021-10-06 12:52:16.915 DBG default: Exit #19: 0 QProcess::NormalExit
2021-10-06 12:52:16.916 DBG default: Exec #20: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-10-06 12:52:16.925 DBG default: Exit #20: 32 QProcess::NormalExit
2021-10-06 12:52:21.989 DBG default: Exec #21: /usr/sbin/gparted
2021-10-06 12:52:34.405 DBG default: SOut #21: "GParted 1.2.0\nconfiguration --enable-libparted-dmraid --enable-online-resize\nlibparted 3.4\n"
2021-10-06 12:52:34.405 DBG default: Exit #21: 0 QProcess::NormalExit
2021-10-06 12:52:34.405 DBG default: +++ void MInstall::updatePartitionWidgets(bool) +++
2021-10-06 12:52:34.407 DBG default: Exec #22: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-10-06 12:52:34.415 DBG default: Exit #22: 0 QProcess::NormalExit
2021-10-06 12:52:34.415 DBG default: Exec #23: partprobe -s
2021-10-06 12:52:34.529 DBG default: SOut #23: "/dev/sda: gpt partitions\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 12:52:34.529 DBG default: Exit #23: 0 QProcess::NormalExit
2021-10-06 12:52:34.529 DBG default: Exec #24: blkid -c /dev/null
2021-10-06 12:52:34.569 DBG default: SOut #24: "/dev/sda: PTUUID=\"4ca2c105-553d-4a8b-b88b-6c1fff6b56a9\" PTTYPE=\"gpt\"\n/dev/sdb1: LABEL=\"MX-Live-usb\" UUID=\"69c12998-ac56-4e82-b3ff-7de8b4fc8d85\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"d79e0a2c-01\"\n/dev/sdb2: LABEL_FATBOOT=\"MX-UEFI\" LABEL=\"MX-UEFI\" UUID=\"2C9D-BF5D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"d79e0a2c-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-10-06 12:52:34.569 DBG default: Exit #24: 0 QProcess::NormalExit
2021-10-06 12:52:34.569 DBG default: Exec #25: parted -lm
2021-10-06 12:52:34.607 DBG default: Exit #25: 0 QProcess::NormalExit
2021-10-06 12:52:34.607 DBG default: Exec #26: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-10-06 12:52:34.617 DBG default: Exit #26: 32 QProcess::NormalExit
2021-10-06 12:53:13.967 DBG default: Mount points:
2021-10-06 12:53:13.968 DBG default:  - "/" - "sda3" "root.fsm" "/dev/mapper/root.fsm"
2021-10-06 12:53:13.968 DBG default:  - "/boot" - "sda2" "sda2" "/dev/sda2"
2021-10-06 12:53:13.968 DBG default:  - "SWAP" - "sda4" "swap" "/dev/mapper/swap"
2021-10-06 12:53:15.383 DBG default: +++ bool MInstall::saveHomeBasic() +++
2021-10-06 12:53:15.393 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 2822, resource id: 18885531, major code: 40 (TranslateCoords), minor code: 0
2021-10-06 12:53:15.420 DBG default: - Preparing to install MX Linux -
2021-10-06 12:53:15.422 DBG default: Exec #27: smartctl -H /dev/sda
2021-10-06 12:53:15.456 DBG default: SOut #27: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-8-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2021-10-06 12:53:15.456 DBG default: Exit #27: 0 QProcess::NormalExit
2021-10-06 12:53:15.456 DBG default: Exec #28: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2021-10-06 12:53:15.484 DBG default: Exit #28: 0 QProcess::NormalExit
2021-10-06 12:53:15.484 DBG default: +++ void MInstall::cleanup(bool) +++
2021-10-06 12:53:15.487 DBG default: Exec #29: /bin/umount -l /mnt/antiX/boot/efi
2021-10-06 12:53:15.497 DBG default: SErr #29: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2021-10-06 12:53:15.498 DBG default: Exit #29: 32 QProcess::NormalExit
2021-10-06 12:53:15.498 DBG default: Exec #30: /bin/umount -l /mnt/antiX/proc
2021-10-06 12:53:15.507 DBG default: SErr #30: "umount: /mnt/antiX/proc: no mount point specified.\n"
2021-10-06 12:53:15.507 DBG default: Exit #30: 32 QProcess::NormalExit
2021-10-06 12:53:15.507 DBG default: Exec #31: /bin/umount -l /mnt/antiX/sys
2021-10-06 12:53:15.516 DBG default: SErr #31: "umount: /mnt/antiX/sys: no mount point specified.\n"
2021-10-06 12:53:15.516 DBG default: Exit #31: 32 QProcess::NormalExit
2021-10-06 12:53:15.516 DBG default: Exec #32: /bin/umount -l /mnt/antiX/dev/shm
2021-10-06 12:53:15.523 DBG default: SErr #32: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2021-10-06 12:53:15.523 DBG default: Exit #32: 32 QProcess::NormalExit
2021-10-06 12:53:15.523 DBG default: Exec #33: /bin/umount -l /mnt/antiX/dev
2021-10-06 12:53:15.532 DBG default: SErr #33: "umount: /mnt/antiX/dev: no mount point specified.\n"
2021-10-06 12:53:15.532 DBG default: Exit #33: 32 QProcess::NormalExit
2021-10-06 12:53:15.532 DBG default: Exec #34: swapoff /dev/sda2
2021-10-06 12:53:15.543 DBG default: SErr #34: "swapoff: /dev/sda2: swapoff failed: No such file or directory\n"
2021-10-06 12:53:15.543 DBG default: Exit #34: 4 QProcess::NormalExit
2021-10-06 12:53:15.543 DBG default: Exec #35: /bin/umount -l /mnt/antiX/boot
2021-10-06 12:53:15.553 DBG default: SErr #35: "umount: /mnt/antiX/boot: no mount point specified.\n"
2021-10-06 12:53:15.553 DBG default: Exit #35: 32 QProcess::NormalExit
2021-10-06 12:53:15.553 DBG default: Exec #36: swapoff /dev/mapper/root.fsm
2021-10-06 12:53:15.562 DBG default: SErr #36: "swapoff: /dev/mapper/root.fsm: swapoff failed: No such file or directory\n"
2021-10-06 12:53:15.562 DBG default: Exit #36: 4 QProcess::NormalExit
2021-10-06 12:53:15.562 DBG default: Exec #37: /bin/umount -l /mnt/antiX/
2021-10-06 12:53:15.570 DBG default: SErr #37: "umount: /mnt/antiX/: no mount point specified.\n"
2021-10-06 12:53:15.571 DBG default: Exit #37: 32 QProcess::NormalExit
2021-10-06 12:53:15.571 DBG default: Exec #38: cryptsetup close /dev/mapper/root.fsm
2021-10-06 12:53:15.786 DBG default: SErr #38: "Device /dev/mapper/root.fsm is not active.\n"
2021-10-06 12:53:15.786 DBG default: Exit #38: 4 QProcess::NormalExit
2021-10-06 12:53:15.786 DBG default: +++ bool PartMan::preparePartitions() +++
2021-10-06 12:53:15.789 DBG default: Exec #39: lsblk -nro name /dev/sda
2021-10-06 12:53:15.798 DBG default: Exit #39: 0 QProcess::NormalExit
2021-10-06 12:53:15.798 DBG default: Exec #40: swapoff /dev/sda
2021-10-06 12:53:15.805 DBG default: SErr #40: "swapoff: /dev/sda: swapoff failed: Invalid argument\n"
2021-10-06 12:53:15.805 DBG default: Exit #40: 4 QProcess::NormalExit
2021-10-06 12:53:15.806 DBG default: Exec #41: /bin/umount /dev/sda
2021-10-06 12:53:15.814 DBG default: SErr #41: "umount: /dev/sda: not mounted.\n"
2021-10-06 12:53:15.814 DBG default: Exit #41: 32 QProcess::NormalExit
2021-10-06 12:53:15.814 DBG default: - Preparing partition tables -
2021-10-06 12:53:15.818 DBG default: Exec #42: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda
2021-10-06 12:53:15.831 DBG default: SErr #42: "64+0 records in\n64+0 records out\n4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.00343248 s, 1.2 GB/s\n"
2021-10-06 12:53:15.831 DBG default: Exit #42: 0 QProcess::NormalExit
2021-10-06 12:53:15.831 DBG default: Exec #43: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda seek=3815539
2021-10-06 12:53:15.839 DBG default: SErr #43: "dd: error writing '/dev/sda': No space left on device\n64+0 records in\n63+0 records out\n4186112 bytes (4.2 MB, 4.0 MiB) copied, 0.00186469 s, 2.2 GB/s\n"
2021-10-06 12:53:15.839 DBG default: Exit #43: 1 QProcess::NormalExit
2021-10-06 12:53:15.839 DBG default: Exec #44: parted -s /dev/sda mklabel gpt
2021-10-06 12:53:15.905 DBG default: Exit #44: 0 QProcess::NormalExit
2021-10-06 12:53:15.905 DBG default: - Preparing required partitions -
2021-10-06 12:53:15.910 DBG default: Exec #45: parted -s --align optimal /dev/sda mkpart primary 1MiB 257MiB
2021-10-06 12:53:15.965 DBG default: Exit #45: 0 QProcess::NormalExit
2021-10-06 12:53:15.969 DBG default: Exec #46: parted -s --align optimal /dev/sda mkpart primary 257MiB 769MiB
2021-10-06 12:53:16.045 DBG default: Exit #46: 0 QProcess::NormalExit
2021-10-06 12:53:16.049 DBG default: Exec #47: parted -s --align optimal /dev/sda mkpart primary 769MiB 230276MiB
2021-10-06 12:53:16.125 DBG default: Exit #47: 0 QProcess::NormalExit
2021-10-06 12:53:16.128 DBG default: Exec #48: parted -s --align optimal /dev/sda mkpart primary 230276MiB 232276MiB
2021-10-06 12:53:16.205 DBG default: Exit #48: 0 QProcess::NormalExit
2021-10-06 12:53:16.209 DBG default: Exec #49: parted -s /dev/sda set 2 legacy_boot on
2021-10-06 12:53:16.285 DBG default: Exit #49: 0 QProcess::NormalExit
2021-10-06 12:53:16.296 DBG default: Exec #50: partprobe -s
2021-10-06 12:53:16.429 DBG default: SOut #50: "/dev/sda: gpt partitions 1 2 3 4\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 12:53:16.429 DBG default: Exit #50: 0 QProcess::NormalExit
2021-10-06 12:53:16.429 DBG default: +++ bool PartMan::formatPartitions() +++
2021-10-06 12:53:16.433 DBG default: - Formatting: EFI System Partition -
2021-10-06 12:53:16.438 DBG default: Exec #51: mkfs.msdos -F 32 -n "EFI System" /dev/sda1
2021-10-06 12:53:16.497 DBG default: SOut #51: "mkfs.fat 4.2 (2021-01-31)\n"
2021-10-06 12:53:16.497 DBG default: SErr #51: "mkfs.fat: Warning: lowercase labels might not work properly on some systems\n"
2021-10-06 12:53:16.497 DBG default: Exit #51: 0 QProcess::NormalExit
2021-10-06 12:53:16.498 DBG default: Exec #52: parted -s /dev/sda set 1 esp on
2021-10-06 12:53:16.641 DBG default: Exit #52: 0 QProcess::NormalExit
2021-10-06 12:53:16.641 DBG default: - Formatting: /boot -
2021-10-06 12:53:16.646 DBG default: Exec #53: mkfs.ext4 -F /dev/sda2 -L "boot"
2021-10-06 12:53:16.713 DBG default: SOut #53: "Discarding device blocks:   4096/131072\b\b\b\b\b\b\b\b\b\b\b\b\b             \b\b\b\b\b\b\b\b\b\b\b\b\bdone                            \nCreating filesystem with 131072 4k blocks and 32768 inodes\nFilesystem UUID: ad312201-fcc2-4d65-8fb9-592efeab0748\nSuperblock backups stored on blocks: \n\t32768, 98304\n\nAllocating group tables: 0/4\b\b\b   \b\b\bdone                            \nWriting inode tables: 0/4\b\b\b   \b\b\bdone                            \nCreating journal (4096 blocks): done\nWriting superblocks and filesystem accounting information: 0/4\b\b\b   \b\b\bdone\n\n"
2021-10-06 12:53:16.713 DBG default: SErr #53: "mke2fs 1.46.2 (28-Feb-2021)\n"
2021-10-06 12:53:16.713 DBG default: Exit #53: 0 QProcess::NormalExit
2021-10-06 12:53:16.713 DBG default: Exec #54: /sbin/tune2fs -c0 -C0 -i1m /dev/sda2
2021-10-06 12:53:16.729 DBG default: SOut #54: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2021-10-06 12:53:16.729 DBG default: Exit #54: 0 QProcess::NormalExit
2021-10-06 12:53:16.729 DBG default: - Creating encrypted volume: sda3 -
2021-10-06 12:53:16.738 DBG default: Exec #55: cryptsetup --batch-mode --key-size 512 --hash sha512 --pbkdf argon2id --sector-size=1358828544 luksFormat /dev/sda3
2021-10-06 12:53:16.747 DBG default: SErr #55: "Usage: cryptsetup [-?Vvyrq] [-?|--help] [--usage] [-V|--version]\n        [-v|--verbose] [--debug] [--debug-json] [-c|--cipher=STRING]\n        [-h|--hash=STRING] [-y|--verify-passphrase] [-d|--key-file=STRING]\n        [--master-key-file=STRING] [--dump-master-key] [-s|--key-size=BITS]\n        [-l|--keyfile-size=bytes] [--keyfile-offset=bytes]\n        [--new-keyfile-size=bytes] [--new-keyfile-offset=bytes]\n        [-S|--key-slot=INT] [-b|--size=SECTORS] [--device-size=bytes]\n        [-o|--offset=SECTORS] [-p|--skip=SECTORS] [-r|--readonly]\n        [-q|--batch-mode] [-t|--timeout=secs] [--progress-frequency=secs]\n        [-T|--tries=INT] [--align-payload=SECTORS]\n        [--header-backup-file=STRING] [--use-random] [--use-urandom]\n        [--shared] [--uuid=STRING] [--allow-discards] [--header=STRING]\n        [--test-passphrase] [--tcrypt-hidden] [--tcrypt-system]\n        [--tcrypt-backup] [--veracrypt] [--veracrypt-pim=INT]\n        [--veracrypt-query-pim] [-M|--type=STRING] [--force-password]\n        [--perf-same_cpu_crypt] [--perf-submit_from_crypt_cpus]\n        [--perf-no_read_workqueue] [--perf-no_write_workqueue] [--deferred]\n        [--serialize-memory-hard-pbkdf] [-i|--iter-time=msecs]\n        [--pbkdf=STRING] [--pbkdf-memory=kilobytes]\n        [--pbkdf-parallel=threads] [--pbkdf-force-iterations=LONG]\n        [--priority=STRING] [--disable-locks] [--disable-keyring]\n        [-I|--integrity=STRING] [--integrity-no-journal]\n        [--integrity-no-wipe] [--integrity-legacy-padding] [--token-only]\n        [--token-id=INT] [--key-description=STRING] [--sector-size=INT]\n        [--iv-large-sectors] [--persistent] [--label=STRING]\n        [--subsystem=STRING] [--unbound] [--json-file=STRING]\n        [--luks2-metadata-size=bytes] [--luks2-keyslots-size=bytes]\n        [--refresh] [--keyslot-key-size=BITS] [--keyslot-cipher=STRING]\n        [--encrypt] [--decrypt] [--init-only] [--resume-only]\n        [--reduce-device-size=bytes] [--hotzone-size=bytes]\n        [--resilience=STRING] [--resilience-hash=STRING]\n        [--active-name=STRING] [OPTION...] <action> <action-specific>\n/usr/sbin/cryptsetup: Unsupported encryption sector size.\n"
2021-10-06 12:53:16.747 DBG default: Exit #55: 1 QProcess::NormalExit
2021-10-06 12:53:16.747 DBG default: +++ void MInstall::failUI(const QString&) +++
2021-10-06 12:53:16.750 DBG default: Phase 1 - "Failed to prepare required partitions."


The below is the minstall.log file after a failed installation without swap:

Code: Select all

2021-10-06 12:59:50.284 DBG default: Installer version: 21.10.03
2021-10-06 12:59:50.395 DBG default: +++ void MInstall::startup() +++
2021-10-06 12:59:50.399 DBG default: check for remastered home demo folder: false
2021-10-06 12:59:50.399 DBG default: Exec #1: du -sb /live/aufs/boot
2021-10-06 12:59:50.452 DBG default: Exit #1: 0 QProcess::NormalExit
2021-10-06 12:59:50.452 DBG default: linuxfs file is at :  "/live/boot-dev/antiX/linuxfs"
2021-10-06 12:59:50.452 DBG default: Exec #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2021-10-06 12:59:50.462 DBG default: Exit #2: 0 QProcess::NormalExit
2021-10-06 12:59:50.462 DBG default: linuxfs compression type is  "6" compression factor is  25
2021-10-06 12:59:50.463 DBG default: Exec #3: df /live/linux --output=used --total |tail -n1
2021-10-06 12:59:50.470 DBG default: Exit #3: 0 QProcess::NormalExit
2021-10-06 12:59:50.471 DBG default: linuxfs file size is  7312769024  rootfs file size is  0
2021-10-06 12:59:50.471 DBG default: Minimum space: 268435456 (boot), 8386510848 (root)
2021-10-06 12:59:50.471 DBG default: Exec #4: uname -m | grep -q i686
2021-10-06 12:59:50.478 DBG default: Exit #4: 1 QProcess::NormalExit
2021-10-06 12:59:50.478 DBG default: uefi = true
2021-10-06 12:59:50.478 DBG default: +++ void MInstall::setupAutoMount(bool) +++
2021-10-06 12:59:50.479 DBG default: Exec #5: ps -e | grep 'udisksd'
2021-10-06 12:59:50.493 DBG default: SOut #5: "   9366 ?        00:00:00 udisksd\n"
2021-10-06 12:59:50.493 DBG default: Exit #5: 0 QProcess::NormalExit
2021-10-06 12:59:50.493 DBG default: Exec #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2021-10-06 12:59:50.509 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2021-10-06 12:59:50.509 DBG default: Exit #6: 2 QProcess::NormalExit
2021-10-06 12:59:50.509 DBG default: Exec #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2021-10-06 12:59:50.517 DBG default: Exit #7: 1 QProcess::NormalExit
2021-10-06 12:59:50.518 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2021-10-06 12:59:50.518 DBG default: Exec #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2021-10-06 12:59:50.522 DBG default: Exit #8: 0 QProcess::NormalExit
2021-10-06 12:59:50.522 DBG default: Exec #9: udevadm control --reload
2021-10-06 12:59:50.533 DBG default: Exit #9: 0 QProcess::NormalExit
2021-10-06 12:59:50.533 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2021-10-06 12:59:50.542 DBG default: Exit #10: 0 QProcess::NormalExit
2021-10-06 12:59:50.542 DBG default: Exec #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2021-10-06 12:59:50.548 DBG default: Exit #11: 1 QProcess::NormalExit
2021-10-06 12:59:50.548 DBG default: check for possible snapshot: false
2021-10-06 12:59:50.606 DBG default: +++ void MInstall::setupkeyboardbutton() +++
2021-10-06 12:59:50.608 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2021-10-06 12:59:50.618 DBG default: Exit #12: 0 QProcess::NormalExit
2021-10-06 12:59:50.622 DBG default: Exec #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2021-10-06 12:59:50.633 DBG default: Exit #13: 0 QProcess::NormalExit
2021-10-06 12:59:50.634 DBG default: Exec #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2021-10-06 12:59:50.702 DBG default: Exit #14: 1 QProcess::NormalExit
2021-10-06 12:59:50.702 DBG default: Exec #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2021-10-06 12:59:50.730 DBG default: Exit #15: 0 QProcess::NormalExit
2021-10-06 12:59:50.730 DBG default: +++ void MInstall::buildServiceList() +++
2021-10-06 12:59:50.734 DBG default: +++ void MInstall::updatePartitionWidgets(bool) +++
2021-10-06 12:59:50.734 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-10-06 12:59:50.747 DBG default: Exit #16: 0 QProcess::NormalExit
2021-10-06 12:59:50.748 DBG default: Exec #17: partprobe -s
2021-10-06 12:59:50.871 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2 3\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 12:59:50.871 DBG default: Exit #17: 0 QProcess::NormalExit
2021-10-06 12:59:50.871 DBG default: Exec #18: blkid -c /dev/null
2021-10-06 12:59:50.911 DBG default: SOut #18: "/dev/sda1: LABEL_FATBOOT=\"EFI System\" LABEL=\"EFI System\" UUID=\"5916-AAC4\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"primary\" PARTUUID=\"6523564d-16d9-4611-ad78-b3b42dad3449\"\n/dev/sda2: LABEL=\"boot\" UUID=\"1c1acc9d-b433-48ca-b650-620dd85eb9a4\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTLABEL=\"primary\" PARTUUID=\"2c957374-cb60-4f5e-b7be-c45ebdb2fb82\"\n/dev/sda3: UUID=\"3b4dbee4-1427-4894-8f3a-c71ae8b47122\" TYPE=\"crypto_LUKS\" PARTLABEL=\"primary\" PARTUUID=\"315647f8-f2ca-4e4a-a4b8-b761774acc54\"\n/dev/sdb1: LABEL=\"MX-Live-usb\" UUID=\"69c12998-ac56-4e82-b3ff-7de8b4fc8d85\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"d79e0a2c-01\"\n/dev/sdb2: LABEL_FATBOOT=\"MX-UEFI\" LABEL=\"MX-UEFI\" UUID=\"2C9D-BF5D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"d79e0a2c-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-10-06 12:59:50.911 DBG default: Exit #18: 0 QProcess::NormalExit
2021-10-06 12:59:50.911 DBG default: Exec #19: parted -lm
2021-10-06 12:59:50.961 DBG default: Exit #19: 0 QProcess::NormalExit
2021-10-06 12:59:50.961 DBG default: Exec #20: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-10-06 12:59:50.970 DBG default: Exit #20: 32 QProcess::NormalExit
2021-10-06 13:00:08.882 DBG default: Exec #21: /usr/sbin/gparted
2021-10-06 13:00:22.308 DBG default: SOut #21: "GParted 1.2.0\nconfiguration --enable-libparted-dmraid --enable-online-resize\nlibparted 3.4\n"
2021-10-06 13:00:22.308 DBG default: Exit #21: 0 QProcess::NormalExit
2021-10-06 13:00:22.308 DBG default: +++ void MInstall::updatePartitionWidgets(bool) +++
2021-10-06 13:00:22.310 DBG default: Exec #22: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2021-10-06 13:00:22.317 DBG default: Exit #22: 0 QProcess::NormalExit
2021-10-06 13:00:22.317 DBG default: Exec #23: partprobe -s
2021-10-06 13:00:22.407 DBG default: SOut #23: "/dev/sda: gpt partitions\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 13:00:22.407 DBG default: Exit #23: 0 QProcess::NormalExit
2021-10-06 13:00:22.407 DBG default: Exec #24: blkid -c /dev/null
2021-10-06 13:00:22.447 DBG default: SOut #24: "/dev/sda: PTUUID=\"2b9b6f10-a554-42f5-a3bc-95778e1afffa\" PTTYPE=\"gpt\"\n/dev/sdb1: LABEL=\"MX-Live-usb\" UUID=\"69c12998-ac56-4e82-b3ff-7de8b4fc8d85\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"d79e0a2c-01\"\n/dev/sdb2: LABEL_FATBOOT=\"MX-UEFI\" LABEL=\"MX-UEFI\" UUID=\"2C9D-BF5D\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"d79e0a2c-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2021-10-06 13:00:22.447 DBG default: Exit #24: 0 QProcess::NormalExit
2021-10-06 13:00:22.447 DBG default: Exec #25: parted -lm
2021-10-06 13:00:22.482 DBG default: Exit #25: 0 QProcess::NormalExit
2021-10-06 13:00:22.482 DBG default: Exec #26: lsblk -T -bJo TYPE,NAME,UUID,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/* 2>/dev/null
2021-10-06 13:00:22.493 DBG default: Exit #26: 32 QProcess::NormalExit
2021-10-06 13:02:11.854 DBG default: Mount points:
2021-10-06 13:02:11.854 DBG default:  - "/" - "sda3" "root.fsm" "/dev/mapper/root.fsm"
2021-10-06 13:02:11.854 DBG default:  - "/boot" - "sda2" "sda2" "/dev/sda2"
2021-10-06 13:02:13.260 DBG default: +++ bool MInstall::saveHomeBasic() +++
2021-10-06 13:02:13.272 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 4257, resource id: 18887372, major code: 40 (TranslateCoords), minor code: 0
2021-10-06 13:02:13.301 DBG default: - Preparing to install MX Linux -
2021-10-06 13:02:13.303 DBG default: Exec #27: smartctl -H /dev/sda
2021-10-06 13:02:13.339 DBG default: SOut #27: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-8-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2021-10-06 13:02:13.339 DBG default: Exit #27: 0 QProcess::NormalExit
2021-10-06 13:02:13.339 DBG default: Exec #28: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2021-10-06 13:02:13.367 DBG default: Exit #28: 0 QProcess::NormalExit
2021-10-06 13:02:13.367 DBG default: +++ void MInstall::cleanup(bool) +++
2021-10-06 13:02:13.368 DBG default: Exec #29: /bin/umount -l /mnt/antiX/boot/efi
2021-10-06 13:02:13.377 DBG default: SErr #29: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2021-10-06 13:02:13.377 DBG default: Exit #29: 32 QProcess::NormalExit
2021-10-06 13:02:13.377 DBG default: Exec #30: /bin/umount -l /mnt/antiX/proc
2021-10-06 13:02:13.385 DBG default: SErr #30: "umount: /mnt/antiX/proc: no mount point specified.\n"
2021-10-06 13:02:13.385 DBG default: Exit #30: 32 QProcess::NormalExit
2021-10-06 13:02:13.385 DBG default: Exec #31: /bin/umount -l /mnt/antiX/sys
2021-10-06 13:02:13.393 DBG default: SErr #31: "umount: /mnt/antiX/sys: no mount point specified.\n"
2021-10-06 13:02:13.393 DBG default: Exit #31: 32 QProcess::NormalExit
2021-10-06 13:02:13.393 DBG default: Exec #32: /bin/umount -l /mnt/antiX/dev/shm
2021-10-06 13:02:13.401 DBG default: SErr #32: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2021-10-06 13:02:13.401 DBG default: Exit #32: 32 QProcess::NormalExit
2021-10-06 13:02:13.401 DBG default: Exec #33: /bin/umount -l /mnt/antiX/dev
2021-10-06 13:02:13.408 DBG default: SErr #33: "umount: /mnt/antiX/dev: no mount point specified.\n"
2021-10-06 13:02:13.408 DBG default: Exit #33: 32 QProcess::NormalExit
2021-10-06 13:02:13.408 DBG default: Exec #34: swapoff /dev/sda2
2021-10-06 13:02:13.419 DBG default: SErr #34: "swapoff: /dev/sda2: swapoff failed: No such file or directory\n"
2021-10-06 13:02:13.419 DBG default: Exit #34: 4 QProcess::NormalExit
2021-10-06 13:02:13.419 DBG default: Exec #35: /bin/umount -l /mnt/antiX/boot
2021-10-06 13:02:13.428 DBG default: SErr #35: "umount: /mnt/antiX/boot: no mount point specified.\n"
2021-10-06 13:02:13.428 DBG default: Exit #35: 32 QProcess::NormalExit
2021-10-06 13:02:13.428 DBG default: Exec #36: swapoff /dev/mapper/root.fsm
2021-10-06 13:02:13.436 DBG default: SErr #36: "swapoff: /dev/mapper/root.fsm: swapoff failed: No such file or directory\n"
2021-10-06 13:02:13.436 DBG default: Exit #36: 4 QProcess::NormalExit
2021-10-06 13:02:13.436 DBG default: Exec #37: /bin/umount -l /mnt/antiX/
2021-10-06 13:02:13.446 DBG default: SErr #37: "umount: /mnt/antiX/: no mount point specified.\n"
2021-10-06 13:02:13.446 DBG default: Exit #37: 32 QProcess::NormalExit
2021-10-06 13:02:13.446 DBG default: Exec #38: cryptsetup close /dev/mapper/root.fsm
2021-10-06 13:02:13.674 DBG default: SErr #38: "Device /dev/mapper/root.fsm is not active.\n"
2021-10-06 13:02:13.674 DBG default: Exit #38: 4 QProcess::NormalExit
2021-10-06 13:02:13.674 DBG default: +++ bool PartMan::preparePartitions() +++
2021-10-06 13:02:13.677 DBG default: Exec #39: lsblk -nro name /dev/sda
2021-10-06 13:02:13.685 DBG default: Exit #39: 0 QProcess::NormalExit
2021-10-06 13:02:13.685 DBG default: Exec #40: swapoff /dev/sda
2021-10-06 13:02:13.692 DBG default: SErr #40: "swapoff: /dev/sda: swapoff failed: Invalid argument\n"
2021-10-06 13:02:13.693 DBG default: Exit #40: 4 QProcess::NormalExit
2021-10-06 13:02:13.693 DBG default: Exec #41: /bin/umount /dev/sda
2021-10-06 13:02:13.701 DBG default: SErr #41: "umount: /dev/sda: not mounted.\n"
2021-10-06 13:02:13.701 DBG default: Exit #41: 32 QProcess::NormalExit
2021-10-06 13:02:13.701 DBG default: - Preparing partition tables -
2021-10-06 13:02:13.705 DBG default: Exec #42: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda
2021-10-06 13:02:13.727 DBG default: SErr #42: "64+0 records in\n64+0 records out\n4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.012817 s, 327 MB/s\n"
2021-10-06 13:02:13.727 DBG default: Exit #42: 0 QProcess::NormalExit
2021-10-06 13:02:13.727 DBG default: Exec #43: dd conv=notrunc bs=64K count=64 if=/dev/zero of=/dev/sda seek=3815539
2021-10-06 13:02:13.739 DBG default: SErr #43: "dd: error writing '/dev/sda': No space left on device\n64+0 records in\n63+0 records out\n4186112 bytes (4.2 MB, 4.0 MiB) copied, 0.00190751 s, 2.2 GB/s\n"
2021-10-06 13:02:13.739 DBG default: Exit #43: 1 QProcess::NormalExit
2021-10-06 13:02:13.739 DBG default: Exec #44: parted -s /dev/sda mklabel gpt
2021-10-06 13:02:13.795 DBG default: Exit #44: 0 QProcess::NormalExit
2021-10-06 13:02:13.795 DBG default: - Preparing required partitions -
2021-10-06 13:02:13.802 DBG default: Exec #45: parted -s --align optimal /dev/sda mkpart primary 1MiB 257MiB
2021-10-06 13:02:13.855 DBG default: Exit #45: 0 QProcess::NormalExit
2021-10-06 13:02:13.859 DBG default: Exec #46: parted -s --align optimal /dev/sda mkpart primary 257MiB 769MiB
2021-10-06 13:02:13.931 DBG default: Exit #46: 0 QProcess::NormalExit
2021-10-06 13:02:13.935 DBG default: Exec #47: parted -s --align optimal /dev/sda mkpart primary 769MiB 238468MiB
2021-10-06 13:02:14.007 DBG default: Exit #47: 0 QProcess::NormalExit
2021-10-06 13:02:14.014 DBG default: Exec #48: parted -s /dev/sda set 2 legacy_boot on
2021-10-06 13:02:14.088 DBG default: Exit #48: 0 QProcess::NormalExit
2021-10-06 13:02:14.095 DBG default: Exec #49: partprobe -s
2021-10-06 13:02:14.219 DBG default: SOut #49: "/dev/sda: gpt partitions 1 2 3\n/dev/sdb: msdos partitions 1 2\n"
2021-10-06 13:02:14.219 DBG default: Exit #49: 0 QProcess::NormalExit
2021-10-06 13:02:14.219 DBG default: +++ bool PartMan::formatPartitions() +++
2021-10-06 13:02:14.223 DBG default: - Formatting: EFI System Partition -
2021-10-06 13:02:14.231 DBG default: Exec #50: mkfs.msdos -F 32 -n "EFI System" /dev/sda1
2021-10-06 13:02:14.295 DBG default: SOut #50: "mkfs.fat 4.2 (2021-01-31)\n"
2021-10-06 13:02:14.296 DBG default: SErr #50: "mkfs.fat: Warning: lowercase labels might not work properly on some systems\n"
2021-10-06 13:02:14.296 DBG default: Exit #50: 0 QProcess::NormalExit
2021-10-06 13:02:14.296 DBG default: Exec #51: parted -s /dev/sda set 1 esp on
2021-10-06 13:02:14.344 DBG default: Exit #51: 0 QProcess::NormalExit
2021-10-06 13:02:14.344 DBG default: - Formatting: /boot -
2021-10-06 13:02:14.351 DBG default: Exec #52: mkfs.ext4 -F /dev/sda2 -L "boot"
2021-10-06 13:02:14.423 DBG default: SOut #52: "Discarding device blocks:   4096/131072\b\b\b\b\b\b\b\b\b\b\b\b\b             \b\b\b\b\b\b\b\b\b\b\b\b\bdone                            \nCreating filesystem with 131072 4k blocks and 32768 inodes\nFilesystem UUID: 153d3647-0d8e-4d59-9f41-0e4799cdfc32\nSuperblock backups stored on blocks: \n\t32768, 98304\n\nAllocating group tables: 0/4\b\b\b   \b\b\bdone                            \nWriting inode tables: 0/4\b\b\b   \b\b\bdone                            \nCreating journal (4096 blocks): done\nWriting superblocks and filesystem accounting information: 0/4\b\b\b   \b\b\bdone\n\n"
2021-10-06 13:02:14.423 DBG default: SErr #52: "mke2fs 1.46.2 (28-Feb-2021)\n"
2021-10-06 13:02:14.423 DBG default: Exit #52: 0 QProcess::NormalExit
2021-10-06 13:02:14.423 DBG default: Exec #53: /sbin/tune2fs -c0 -C0 -i1m /dev/sda2
2021-10-06 13:02:14.439 DBG default: SOut #53: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2021-10-06 13:02:14.439 DBG default: Exit #53: 0 QProcess::NormalExit
2021-10-06 13:02:14.439 DBG default: - Creating encrypted volume: sda3 -
2021-10-06 13:02:14.446 DBG default: Exec #54: cryptsetup --batch-mode --key-size 512 --hash sha512 --pbkdf argon2id --sector-size=353437696 luksFormat /dev/sda3
2021-10-06 13:02:14.457 DBG default: SErr #54: "Usage: cryptsetup [-?Vvyrq] [-?|--help] [--usage] [-V|--version]\n        [-v|--verbose] [--debug] [--debug-json] [-c|--cipher=STRING]\n        [-h|--hash=STRING] [-y|--verify-passphrase] [-d|--key-file=STRING]\n        [--master-key-file=STRING] [--dump-master-key] [-s|--key-size=BITS]\n        [-l|--keyfile-size=bytes] [--keyfile-offset=bytes]\n        [--new-keyfile-size=bytes] [--new-keyfile-offset=bytes]\n        [-S|--key-slot=INT] [-b|--size=SECTORS] [--device-size=bytes]\n        [-o|--offset=SECTORS] [-p|--skip=SECTORS] [-r|--readonly]\n        [-q|--batch-mode] [-t|--timeout=secs] [--progress-frequency=secs]\n        [-T|--tries=INT] [--align-payload=SECTORS]\n        [--header-backup-file=STRING] [--use-random] [--use-urandom]\n        [--shared] [--uuid=STRING] [--allow-discards] [--header=STRING]\n        [--test-passphrase] [--tcrypt-hidden] [--tcrypt-system]\n        [--tcrypt-backup] [--veracrypt] [--veracrypt-pim=INT]\n        [--veracrypt-query-pim] [-M|--type=STRING] [--force-password]\n        [--perf-same_cpu_crypt] [--perf-submit_from_crypt_cpus]\n        [--perf-no_read_workqueue] [--perf-no_write_workqueue] [--deferred]\n        [--serialize-memory-hard-pbkdf] [-i|--iter-time=msecs]\n        [--pbkdf=STRING] [--pbkdf-memory=kilobytes]\n        [--pbkdf-parallel=threads] [--pbkdf-force-iterations=LONG]\n        [--priority=STRING] [--disable-locks] [--disable-keyring]\n        [-I|--integrity=STRING] [--integrity-no-journal]\n        [--integrity-no-wipe] [--integrity-legacy-padding] [--token-only]\n        [--token-id=INT] [--key-description=STRING] [--sector-size=INT]\n        [--iv-large-sectors] [--persistent] [--label=STRING]\n        [--subsystem=STRING] [--unbound] [--json-file=STRING]\n        [--luks2-metadata-size=bytes] [--luks2-keyslots-size=bytes]\n        [--refresh] [--keyslot-key-size=BITS] [--keyslot-cipher=STRING]\n        [--encrypt] [--decrypt] [--init-only] [--resume-only]\n        [--reduce-device-size=bytes] [--hotzone-size=bytes]\n        [--resilience=STRING] [--resilience-hash=STRING]\n        [--active-name=STRING] [OPTION...] <action> <action-specific>\n/usr/sbin/cryptsetup: Unsupported encryption sector size.\n"
2021-10-06 13:02:14.457 DBG default: Exit #54: 1 QProcess::NormalExit
2021-10-06 13:02:14.457 DBG default: +++ void MInstall::failUI(const QString&) +++
2021-10-06 13:02:14.463 DBG default: Phase 1 - "Failed to prepare required partitions."
By the way, MX-21_beta2 installed fine.
thanks. this is a very good bug report too. :happy:
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
markol
Posts: 414
Joined: Sat Jan 30, 2021 8:33 am

Re: MX-21 RC1 feedback (Xfce)

#30 Post by markol »

SwampRabbit wrote: Wed Oct 06, 2021 10:39 am @markol by everything working OOTB, do you mean hardware? Can you please explain a bit more what worked OOTB for you so we can tell what we need to sustain moving forward?
If its hardware, care to share your QSI please? Thanks!
This was my test VM. Complete setup was done in less than 20 minutes (including personalization). It detected and installed printer(s), detected UPS (!), and other HW connected to host system
I do prefer KDE, but this installation was superb!

I will install the 32bit version to Asus EEE tonight and report. I'm afraid I don't have any recent laptops at home.

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64 
           root=UUID=<filter> ro init=/lib/systemd/systemd 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_rc1_x64 Wildflower October 5  2021 base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Virtualbox System: innotek product: VirtualBox v: 1.2 serial: <filter> 
           Chassis: Oracle Corporation type: 1 serial: <filter> 
           Mobo: Oracle model: VirtualBox v: 1.2 serial: <filter> BIOS: innotek v: VirtualBox 
           date: 12/01/2006 
Battery:   ID-1: BAT0 charge: 50.0 Wh condition: 50.0/50.0 Wh (100%) volts: 10.0/10.0 
           model: innotek 1 type: Unknown serial: N/A status: Full 
CPU:       Topology: Single Core model: Intel Core i7-4720HQ bits: 64 type: MCP arch: Haswell 
           family: 6 model-id: 3C (60) stepping: 3 microcode: N/A L2 cache: 6144 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 5187 
           Speed: 2594 MHz min/max: N/A Core speed (MHz): 1: 2594 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds mitigation: Clear CPU buffers; SMT Host state unknown 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Unknown: Dependent on hypervisor status 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: VMware SVGA II Adapter driver: vmwgfx v: 2.18.0.0 bus ID: 00:02.0 
           chip ID: 15ad:0405 
           Display: x11 server: X.Org 1.20.11 driver: vmware unloaded: fbdev,modesetting,vesa 
           resolution: 1630x881~60Hz 
           OpenGL: renderer: llvmpipe (LLVM 11.0.1 256 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: Intel 82801AA AC97 Audio vendor: Dell driver: snd_intel8x0 v: kernel 
           bus ID: 00:05.0 chip ID: 8086:2415 
           Sound Server: ALSA v: k5.10.0-8-amd64 
Network:   Device-1: Intel 82540EM Gigabit Ethernet driver: e1000 v: kernel port: d020 
           bus ID: 00:03.0 chip ID: 8086:100e 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: piix4_smbus 
           v: N/A port: d200 bus ID: 00:07.0 chip ID: 8086:7113 
Drives:    Local Storage: total: 20.01 GiB used: 8.20 GiB (41.0%) 
           ID-1: /dev/sda vendor: VirtualBox model: VBOX HARDDISK size: 20.01 GiB block size: 
           physical: 512 B logical: 512 B speed: 3.0 Gb/s serial: <filter> rev: 1.0 scheme: MBR 
Partition: ID-1: / raw size: 18.88 GiB size: 18.41 GiB (97.54%) used: 8.20 GiB (44.5%) fs: ext4 
           dev: /dev/sda1 
           ID-2: swap-1 size: 1.12 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda2 
Sensors:   Message: No sensors data was found. Is sensors configured? 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/microsoft-edge-beta.list 
           1: deb [arch=amd64] https://packages.microsoft.com/repos/edge/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb https://ftp.arnes.si/mirrors/mxlinux/packages/mx/repo/ bullseye main non-free
Info:      Processes: 193 Uptime: 2m Memory: 5.17 GiB used: 626.9 MiB (11.9%) Init: systemd 
           v: 247 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36
Top
Locked

Return to “General”