MX-21 beta 2 feedback thread (xfce)

Forum rules
Locked
Message
Author
User avatar
j2mcgreg
Global Moderator
Posts: 6654
Joined: Tue Oct 23, 2007 12:04 pm

Re: MX-21 beta 2 feedback thread (xfce)

#221 Post by j2mcgreg »

Just now in trying to run the latest updates, i got this error message:

Code: Select all

W: Failed to fetch http://mxrepo.com/mx/repo/pool/main/a/apt-notifier/apt-notifier_21.09.01mx21%2b1_all.deb
  404  Not Found [IP: 70.40.214.183 80]
I first tried to do the update with MXPI and when it baulked, I switched to Synaptic and after updating the package list, I ran the updates again and it failed but indicated that the problem was with the RIT mirror in Rochester NY. I switched to the Utah mirror, updated the package list again and got the error message above.

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_beta2_x64 Wildflower September 4  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: Acer product: Aspire V5-571 v: V1.12 serial: <filter> 
           Mobo: Acer model: Aspire V5-571 v: V1.12 serial: <filter> UEFI: Phoenix v: 1.12 
           date: 06/12/2012 
Battery:   ID-1: BAT0 charge: 28.5 Wh condition: 29.4/37.0 Wh (79%) volts: 17.1/14.8 
           model: SANYO AL12A32 type: Li-ion serial: <filter> status: Unknown 
           Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331 
           serial: <filter> charge: 55% (should be ignored) rechargeable: yes 
           status: Discharging 
CPU:       Topology: Dual Core model: Intel Core i3-2367M bits: 64 type: MT MCP 
           arch: Sandy Bridge family: 6 model-id: 2A (42) stepping: 7 microcode: 2F 
           L2 cache: 3072 KiB 
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 11175 
           Speed: 919 MHz min/max: 800/1400 MHz Core speeds (MHz): 1: 972 2: 951 3: 1009 4: 1067 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics 
           vendor: Acer Incorporated ALI driver: i915 v: kernel bus ID: 00:02.0 
           chip ID: 8086:0116 
           Display: x11 server: X.Org 1.20.11 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1366x768~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 3000 (SNB GT2) v: 3.3 Mesa 20.3.5 
           compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel 7 Series/C216 Family High Definition Audio 
           vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
           chip ID: 8086:1e20 
           Sound Server: ALSA v: k5.10.0-8-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: Acer Incorporated ALI driver: r8169 v: kernel port: 2000 bus ID: 02:00.2 
           chip ID: 10ec:8168 
           IF: eth0 state: down mac: <filter> 
           Device-2: Qualcomm Atheros AR9462 Wireless Network Adapter vendor: Lite-On 
           driver: ath9k v: kernel port: 2000 bus ID: 03:00.0 chip ID: 168c:0034 
           IF: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 465.76 GiB used: 13.02 GiB (2.8%) 
           ID-1: /dev/sda vendor: Western Digital model: WDS500G2B0A-00SM50 size: 465.76 GiB 
           block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 20WD 
           scheme: GPT 
Partition: ID-1: / raw size: 457.48 GiB size: 449.23 GiB (98.20%) used: 13.02 GiB (2.9%) 
           fs: ext4 dev: /dev/sda2 
           ID-2: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 49.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
Info:      Processes: 215 Uptime: 1h 06m Memory: 7.57 GiB used: 760.2 MiB (9.8%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.
Top
User avatar
siamhie
Global Moderator
Posts: 3240
Joined: Fri Aug 20, 2021 5:45 pm

Re: MX-21 beta 2 feedback thread (xfce)

#222 Post by siamhie »

j2mcgreg wrote: Tue Sep 21, 2021 9:25 am Just now in trying to run the latest updates, i got this error message:

Code: Select all

W: Failed to fetch http://mxrepo.com/mx/repo/pool/main/a/apt-notifier/apt-notifier_21.09.01mx21%2b1_all.deb
  404  Not Found [IP: 70.40.214.183 80]
I first tried to do the update with MXPI and when it baulked, I switched to Synaptic and after updating the package list, I ran the updates again and it failed but indicated that the problem was with the RIT mirror in Rochester NY. I switched to the Utah mirror, updated the package list again and got the error message above.
I'm having the same issue with Fluxbox beta 2 and the la.mxrepo. KDE beta 2 doesn't have apt-notifier listed as an update and proceeded to update everything this morning with no problems.
This is my Fluxbox . There are many others like it, but this one is mine. My Fluxbox is my best friend. It is my life.
I must master it as I must master my life. Without me, my Fluxbox is useless. Without my Fluxbox, I am useless.
Top
User avatar
dolphin_oracle
Developer
Posts: 22111
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-21 beta 2 feedback thread (xfce)

#223 Post by dolphin_oracle »

siamhie wrote: Tue Sep 21, 2021 9:31 am
j2mcgreg wrote: Tue Sep 21, 2021 9:25 am Just now in trying to run the latest updates, i got this error message:

Code: Select all

W: Failed to fetch http://mxrepo.com/mx/repo/pool/main/a/apt-notifier/apt-notifier_21.09.01mx21%2b1_all.deb
  404  Not Found [IP: 70.40.214.183 80]
I first tried to do the update with MXPI and when it baulked, I switched to Synaptic and after updating the package list, I ran the updates again and it failed but indicated that the problem was with the RIT mirror in Rochester NY. I switched to the Utah mirror, updated the package list again and got the error message above.
I'm having the same issue with Fluxbox beta 2 and the la.mxrepo. KDE beta 2 doesn't have apt-notifier listed as an update and proceeded to update everything this morning with no problems.
thanks. probably a bad sync somewhere. @timkb4cq
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
timkb4cq
Developer
Posts: 3566
Joined: Wed Jul 12, 2006 4:05 pm

Re: MX-21 beta 2 feedback thread (xfce)

#224 Post by timkb4cq »

Yes, it was a failed upload. Corrected now on all the *.mxrepo.com servers.
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Top
User avatar
siamhie
Global Moderator
Posts: 3240
Joined: Fri Aug 20, 2021 5:45 pm

Re: MX-21 beta 2 feedback thread (xfce)

#225 Post by siamhie »

timkb4cq wrote: Tue Sep 21, 2021 10:24 am Yes, it was a failed upload. Corrected now on all the *.mxrepo.com servers.
Thank you

Get:1 http://la.mxrepo.com/mx/repo bullseye/main amd64 apt-notifier all 21.09.01mx21+1 [226 kB]
Fetched 226 kB in 0s (629 kB/s)
This is my Fluxbox . There are many others like it, but this one is mine. My Fluxbox is my best friend. It is my life.
I must master it as I must master my life. Without me, my Fluxbox is useless. Without my Fluxbox, I am useless.
Top
waldmattis
Posts: 260
Joined: Sat May 28, 2016 6:17 pm

Re: MX-21 beta 2 feedback thread (xfce)

#226 Post by waldmattis »

Good evening.
Today I installed beta2 xfce, 64bit

error:
Noscript, vers.: 11.2.11 from September 21, 2021:
you can not set the permissions, so also not change them

used in Firefox 92.0 (64-bit)

Regards
Karl

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_beta2_x64 Wildflower September 4  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: Dell product: Latitude E6320 v: 01 serial: <filter> Chassis: 
           type: 9 serial: <filter> 
           Mobo: Dell model: 0GJF11 v: A01 serial: <filter> BIOS: Dell v: A06 date: 07/11/2011 
Battery:   ID-1: BAT0 charge: 9.4 Wh condition: 9.4/60.0 Wh (16%) volts: 12.6/11.1 
           model: SMP DELL HGKH01A type: Li-ion serial: <filter> status: Full 
CPU:       Topology: Dual Core model: Intel Core i5-2520M bits: 64 type: MT MCP 
           arch: Sandy Bridge family: 6 model-id: 2A (42) stepping: 7 microcode: 2F 
           L2 cache: 3072 KiB 
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19956 
           Speed: 893 MHz min/max: 800/3200 MHz Core speeds (MHz): 1: 919 2: 837 3: 914 4: 920 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics vendor: Dell 
           driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0126 
           Display: x11 server: X.Org 1.20.11 driver: i915 resolution: 1366x768~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 3000 (SNB GT2) v: 3.3 Mesa 20.3.5 
           compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: Dell 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:1c20 
           Sound Server: ALSA v: k5.10.0-8-amd64 
Network:   Device-1: Intel 82579LM Gigabit Network vendor: Dell driver: e1000e v: kernel 
           port: 4080 bus ID: 00:19.0 chip ID: 8086:1502 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           Device-2: Broadcom and subsidiaries BCM4313 802.11bgn Wireless Network Adapter 
           vendor: Dell Inspiron M5010 / XPS 8300 driver: wl v: kernel port: 4040 
           bus ID: 02:00.0 chip ID: 14e4:4727 
           IF: wlan0 state: dormant mac: <filter> 
Drives:    Local Storage: total: 232.89 GiB used: 6.12 GiB (2.6%) 
           ID-1: /dev/sda vendor: Samsung model: SSD 850 EVO 250GB size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 1B6Q scheme: MBR 
RAID:      Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0 
           port: 4060 bus ID: 00:1f.2 chip ID: 8086.282a rev: 04 
Partition: ID-1: / raw size: 50.00 GiB size: 48.91 GiB (97.83%) used: 6.12 GiB (12.5%) fs: ext4 
           dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 48.0 C mobo: 23.0 C sodimm: 28.0 C 
           Fan Speeds (RPM): cpu: 0 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye main non-free
Info:      Processes: 219 Uptime: 42m Memory: 7.65 GiB used: 2.09 GiB (27.3%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36
Top
User avatar
gour
Posts: 12
Joined: Wed Sep 15, 2021 4:00 am

Re: MX-21 beta 2 feedback thread (xfce)

#227 Post by gour »

Hello,

have problem starting Emacs:

Code: Select all

$  emacs
X protocol error: BadMatch (invalid parameter attributes) on protocol request 139
When compiled with GTK, Emacs cannot recover from X disconnects.
This is a GTK bug: https://gitlab.gnome.org/GNOME/gtk/issues/221
For details, see etc/PROBLEMS.
Fatal error 6: Aborted
Backtrace:
emacs(+0x149584)[0x55dc52cbd584]
emacs(+0x45716)[0x55dc52bb9716]
emacs(+0x45c02)[0x55dc52bb9c02]
emacs(+0x44c0b)[0x55dc52bb8c0b]
emacs(+0xfe43a)[0x55dc52c7243a]
emacs(+0xfe4c5)[0x55dc52c724c5]
/lib/x86_64-linux-gnu/libX11.so.6(_XError+0x124)[0x7f2a9b72f864]
/lib/x86_64-linux-gnu/libX11.so.6(+0x43327)[0x7f2a9b72c327]
/lib/x86_64-linux-gnu/libX11.so.6(+0x433c5)[0x7f2a9b72c3c5]
/lib/x86_64-linux-gnu/libX11.so.6(_XEventsQueued+0x9a)[0x7f2a9b72cffa]
/lib/x86_64-linux-gnu/libX11.so.6(XPending+0x61)[0x7f2a9b71e931]
/lib/x86_64-linux-gnu/libgdk-3.so.0(+0x6e3ef)[0x7f2a9beb13ef]
/lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_prepare+0x1af)[0x7f2a9b8a657f]
/lib/x86_64-linux-gnu/libglib-2.0.so.0(+0x51fdb)[0x7f2a9b8a6fdb]
/lib/x86_64-linux-gnu/libglib-2.0.so.0(g_main_context_pending+0x28)[0x7f2a9b8a7178]
/lib/x86_64-linux-gnu/libgtk-3.so.0(gtk_events_pending+0xe)[0x7f2a9c195ade]
emacs(+0xfe0cd)[0x55dc52c720cd]
emacs(+0x136042)[0x55dc52caa042]
emacs(+0x136d95)[0x55dc52caad95]
emacs(+0x97812)[0x55dc52c0b812]
emacs(+0x4f966)[0x55dc52bc3966]
emacs(+0x54eae)[0x55dc52bc8eae]
emacs(+0x56971)[0x55dc52bca971]
emacs(+0x8fba9)[0x55dc52c03ba9]
emacs(+0x8fcd9)[0x55dc52c03cd9]
emacs(+0x8ff58)[0x55dc52c03f58]
emacs(+0x1a23a0)[0x55dc52d163a0]
emacs(+0x1ab21b)[0x55dc52d1f21b]
emacs(+0x1e37f8)[0x55dc52d577f8]
emacs(+0x1ae0b5)[0x55dc52d220b5]
emacs(+0x1ab157)[0x55dc52d1f157]
emacs(+0x1ab3d9)[0x55dc52d1f3d9]
emacs(+0x1d3a31)[0x55dc52d47a31]
emacs(+0x1ab21b)[0x55dc52d1f21b]
emacs(+0x1e37f8)[0x55dc52d577f8]
emacs(+0x1ae0b5)[0x55dc52d220b5]
emacs(+0x1ab157)[0x55dc52d1f157]
emacs(+0x1ab2da)[0x55dc52d1f2da]
emacs(+0x1b4944)[0x55dc52d28944]
emacs(+0x1b6c65)[0x55dc52d2ac65]
emacs(+0x1ab21b)[0x55dc52d1f21b]
...
fish: “emacs” terminated by signal SIGABRT (Abort)
Here is the quick info content:

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-21_beta2_x64 Wildflower September 4  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop Mobo: Gigabyte model: P55-UD4 v: x.x serial: <filter> BIOS: Award v: F9 
           date: 06/25/2010 
CPU:       Topology: Quad Core model: Intel Core i7 860 bits: 64 type: MT MCP arch: Nehalem 
           family: 6 model-id: 1E (30) stepping: 5 microcode: A L2 cache: 8192 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 44766 
           Speed: 1443 MHz min/max: N/A Core speeds (MHz): 1: 1443 2: 1386 3: 1562 4: 1455 
           5: 1498 6: 1678 7: 1443 8: 1634 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds 
           status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: AMD RV730 XT [Radeon HD 4670] vendor: Gigabyte driver: radeon v: kernel 
           bus ID: 01:00.0 chip ID: 1002:9490 
           Display: x11 server: X.Org 1.20.11 driver: ati,radeon 
           unloaded: fbdev,modesetting,vesa resolution: 2560x1440~60Hz 
           OpenGL: renderer: AMD RV730 (DRM 2.50.0 / 5.10.0-8-amd64 LLVM 11.0.1) 
           v: 3.3 Mesa 20.3.5 compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Gigabyte 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56 
           Device-2: AMD RV710/730 HDMI Audio [Radeon HD 4000 series] vendor: Gigabyte 
           driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 1002:aa38 
           Device-3: Logitech QuickCam Vision Pro type: USB driver: snd-usb-audio,uvcvideo 
           bus ID: 1-1:2 chip ID: 046d:09a6 serial: <filter> 
           Sound Server: ALSA v: k5.10.0-8-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte 
           driver: r8169 v: kernel port: de00 bus ID: 06:00.0 chip ID: 10ec:8168 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 3.64 TiB used: 1.37 TiB (37.8%) 
           ID-1: /dev/sda vendor: Seagate model: ST2000DM008-2FR102 size: 1.82 TiB block size: 
           physical: 4096 B logical: 512 B speed: 3.0 Gb/s rotation: 7200 rpm serial: <filter> 
           rev: 0001 temp: 40 C scheme: GPT 
           ID-2: /dev/sdb vendor: Seagate model: ST2000DM008-2FR102 size: 1.82 TiB block size: 
           physical: 4096 B logical: 512 B speed: 3.0 Gb/s rotation: 7200 rpm serial: <filter> 
           rev: 0001 temp: 41 C scheme: GPT 
RAID:      Supported md-raid types: raid0 raid1 linear multipath raid6 raid5 raid4 raid10 
           Device-1: md125 type: mdraid status: active Components: online: sda3~c0 sdb3~c1 
           Info: raid: raid-0 blocks: 8378368 report: N/A chunk size: 512k super blocks: 1.2 
           Device-2: md126 type: mdraid status: active Components: online: sda4~c0 sdb4~c2 
           Info: raid: mirror blocks: 1917728832 report: 2/2 UU chunk size: N/A 
           super blocks: 1.2 
           Device-3: md127 type: mdraid status: active Components: online: sda2~c0 sdb2~c2 
           Info: raid: mirror blocks: 31439872 report: 2/2 UU chunk size: N/A super blocks: 1.2 
Partition: ID-1: / raw size: 29.98 GiB size: 29.97 GiB (99.95%) used: 21.88 GiB (73.0%) fs: xfs 
           dev: /dev/md127 
           ID-2: /home raw size: 1.79 TiB size: 1.79 TiB (99.95%) used: 1.35 TiB (75.8%) fs: xfs 
           dev: /dev/md126 
           ID-3: swap-1 size: 7.99 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/md125 
Sensors:   System Temperatures: cpu: 41.0 C mobo: N/A gpu: radeon temp: 56 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/anydesk-stable.list 
           1: deb http://deb.anydesk.com/ all main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://debian.anexia.at/debian/ bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://debian.anexia.at/debian/ bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mirror.easyname.ch/mxlinux-packages/mx/repo/ bullseye main non-free
           Active apt repos in: /etc/apt/sources.list.d/nodesource.list 
           1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bullseye main
           2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_16.x bullseye main
           Active apt repos in: /etc/apt/sources.list.d/signal-xenial.list 
           1: deb [arch=amd64 signed-by=/usr/share/keyrings/signal-desktop-keyring.gpg] https://updates.signal.org/desktop/apt xenial main
           Active apt repos in: /etc/apt/sources.list.d/skype-stable.list 
           1: deb [arch=amd64] https://repo.skype.com/deb stable main
Info:      Processes: 331 Uptime: 9h 19m Memory: 15.62 GiB used: 4.07 GiB (26.1%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36
Any hint?
Last edited by gour on Thu Sep 23, 2021 9:49 am, edited 2 times in total.
Top
User avatar
JayM
Posts: 6796
Joined: Tue Jan 08, 2019 3:47 am

Re: MX-21 beta 2 feedback thread (xfce)

#228 Post by JayM »

@gour Please edit your post using the pencil icon
Image
to wrap the information inside of code tags as per the forum rules (which please read.) Example: [code]log file contents, configuration file contents and terminal text go here[/code]

Code: Select all

to make it look like this, which is a lot easier to read for large amounts of text:
1. It really stands out as being separate from the text that you're typing due to the different background and font colors
2. It also puts it inside of its own little frame with its own scrollbars, making it easier to navigate.

To do this, select the text by dragging your mouse over it while holding the left button down then click the </> icon in the forum's editor's toolbar and click the Submit button.
Image
Thanks.
Please read the Forum Rules, How To Ask For Help, How to Break Your System and Don't Break Debian. Always include your full Quick System Info (QSI) with each and every new help request.
Top
User avatar
gour
Posts: 12
Joined: Wed Sep 15, 2021 4:00 am

Re: MX-21 beta 2 feedback thread (xfce)

#229 Post by gour »

JayM wrote: Wed Sep 22, 2021 7:24 am @gour Please edit your post using the pencil icon...to wrap the information inside of code tags.Thanks.
Ahh, I apologize - just selected wrong icon from the toolbar. :frown:
Top
User avatar
gour
Posts: 12
Joined: Wed Sep 15, 2021 4:00 am

Re: MX-21 beta 2 feedback thread (xfce)

#230 Post by gour »

Found on the internet workaround for my problem...one has to launch Emacs with:

Code: Select all

XLIB_SKIP_ARGB_VISUALS=1 emacs

but I must say that it's the first time that I require such workaround on my machine which was running plenty of different distros (Debian, Fedora, openSuSE..). :rolleyes: :confused:

Should I report bug here?
Top
Locked

Return to “General”