Wireguard - PIA VPN

Message
Author
jerry525
Posts: 28
Joined: Sat Jun 07, 2014 10:39 am

Wireguard - PIA VPN

#1 Post by jerry525 »

Hi, I know this is has been discussed but I don't get why this isn't working. I installed wireguard fine on bunsenlabs on an old laptop just now but I would like it on my main computer. I'm not very technical btw:

Code: Select all

jerry@mx:~
$ sudo apt install wireguard
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  wireguard-dkms wireguard-tools
The following NEW packages will be installed:
  wireguard wireguard-dkms wireguard-tools
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/350 kB of archives.
After this operation, 2,109 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Selecting previously unselected package wireguard-dkms.
(Reading database ... 425534 files and directories currently installed.)
Preparing to unpack .../wireguard-dkms_1.0.20210219-1~bpo10+1_all.deb ...
Unpacking wireguard-dkms (1.0.20210219-1~bpo10+1) ...
Selecting previously unselected package wireguard-tools.
Preparing to unpack .../wireguard-tools_1.0.20210223-1~bpo10+1_amd64.deb ...
Unpacking wireguard-tools (1.0.20210223-1~bpo10+1) ...
Selecting previously unselected package wireguard.
Preparing to unpack .../wireguard_1.0.20210223-1~bpo10+1_all.deb ...
Unpacking wireguard (1.0.20210223-1~bpo10+1) ...
Setting up wireguard-dkms (1.0.20210219-1~bpo10+1) ...
Loading new wireguard-1.0.20210219 DKMS files...
Building for 4.19.0-6-amd64
Building initial module for 4.19.0-6-amd64
Error! Bad return status for module build on kernel: 4.19.0-6-amd64 (x86_64)
Consult /var/lib/dkms/wireguard/1.0.20210219/build/make.log for more information.
dpkg: error processing package wireguard-dkms (--configure):
 installed wireguard-dkms package post-installation script subprocess returned error exit status 10
Setting up wireguard-tools (1.0.20210223-1~bpo10+1) ...
wg-quick.target is a disabled or a static unit not running, not starting it.
dpkg: dependency problems prevent configuration of wireguard:
 wireguard depends on wireguard-modules (>= 0.0.20191219) | wireguard-dkms (>= 0.0.20200121-2); however:
  Package wireguard-modules is not installed.
  Package wireguard-dkms is not configured yet.

dpkg: error processing package wireguard (--configure):
 dependency problems - leaving unconfigured
Processing triggers for man-db (2.8.5-2) ...
Errors were encountered while processing:
 wireguard-dkms
 wireguard
E: Sub-process /usr/bin/dpkg returned an error code (1)
jerry@mx:~

Code: Select all

System:    Host: <filter> Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 
           root=UUID=<filter> ro quiet splash 
           init=/lib/systemd/systemd 
           Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel, cairo-dock wm: xfwm4 
           dm: LightDM 1.26.0 Distro: MX-19.4_x64 patito feo February 15  2020 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop System: ASUS product: All Series v: N/A serial: <filter> 
           Mobo: ASUSTeK model: Z97-P v: Rev X.0x serial: <filter> UEFI: American Megatrends 
           v: 2803 date: 05/21/2015 
Battery:   Device-1: hidpp_battery_0 model: Logitech K400 Professional Wireless Touch Keyboard 
           serial: <filter> charge: 100% (should be ignored) rechargeable: yes 
           status: Discharging 
CPU:       Topology: Quad Core model: Intel Core i5-4690K bits: 64 type: MCP arch: Haswell 
           family: 6 model-id: 3C (60) stepping: 3 microcode: 28 L2 cache: 6144 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 27985 
           Speed: 1044 MHz min/max: 800/3900 MHz Core speeds (MHz): 1: 892 2: 853 3: 874 4: 924 
           Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: disabled, RSB filling 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA GM204 [GeForce GTX 980] driver: nvidia v: 418.197.02 bus ID: 01:00.0 
           chip ID: 10de:13c0 
           Display: x11 server: X.Org 1.20.4 driver: nvidia 
           unloaded: fbdev,modesetting,nouveau,vesa alternate: nv 
           resolution: 1920x1080~60Hz, 1920x1080~60Hz 
           OpenGL: renderer: GeForce GTX 980/PCIe/SSE2 v: 4.6.0 NVIDIA 418.197.02 
           direct render: Yes 
Audio:     Device-1: Intel 9 Series Family HD Audio vendor: ASUSTeK driver: snd_hda_intel 
           v: kernel bus ID: 00:1b.0 chip ID: 8086:8ca0 
           Device-2: NVIDIA GM204 High Definition Audio driver: snd_hda_intel v: kernel 
           bus ID: 01:00.1 chip ID: 10de:0fbb 
           Device-3: ARC Camera type: USB driver: snd-usb-audio,uvcvideo bus ID: 2-4:3 
           chip ID: 05a3:9331 serial: <filter> 
           Device-4: Sennheiser type: USB driver: hid-generic,snd-usb-audio,usbhid bus ID: 2-7:4 
           chip ID: 1395:0033 serial: <filter> 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK 
           driver: r8169 v: kernel port: d000 bus ID: 03:00.0 chip ID: 10ec:8168 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           IF-ID-1: wgpia0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
Drives:    Local Storage: total: 1.13 TiB used: 58.17 GiB (5.0%) 
           ID-1: /dev/sda vendor: Seagate model: ST1000DM003-1ER162 size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> 
           rev: CC45 temp: 27 C scheme: GPT 
           ID-2: /dev/sdb vendor: Crucial model: CT240BX500SSD1 size: 223.57 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: R013 temp: 30 C 
           scheme: GPT 
Partition: ID-1: / raw size: 221.29 GiB size: 216.81 GiB (97.98%) used: 58.17 GiB (26.8%) 
           fs: ext4 dev: /dev/sdb2 
           ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sdb3 
Sensors:   System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: nvidia temp: 56 C 
           Fan Speeds (RPM): cpu: 0 gpu: nvidia fan: 0% 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 
           1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian/ buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian/ buster main contrib non-free
           2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
           3: deb http://deb.debian.org/debian/ buster-backports non-free contrib main
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb https://anorien.csc.warwick.ac.uk/mxlinux/packages/mx/repo/ buster non-free main
           Active apt repos in: /etc/apt/sources.list.d/teams.list 
           1: deb [arch=amd64] https://packages.microsoft.com/repos/ms-teams/ stable main
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 208 Uptime: 9m Memory: 15.61 GiB used: 1.77 GiB (11.4%) Init: systemd 
           v: 241 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36 

User avatar
fehlix
Developer
Posts: 12633
Joined: Wed Apr 11, 2018 5:09 pm

Re: Wireguard - PIA VPN

#2 Post by fehlix »

I think you might have better luck, when having disabled the Debian backports repo and do install using MXPI->Backports tabs.

jerry525
Posts: 28
Joined: Sat Jun 07, 2014 10:39 am

Re: Wireguard - PIA VPN

#3 Post by jerry525 »

My system broke after I installed wireguard dkms. My son is a wiz and got it back, uninstalled all wire-guard. Thanks for your reply but I am going to leave things as they are, I need this machine for work.

Post Reply

Return to “Software / Configuration”