[Solved] Installation of proprietary NVIDIA Quadro NVS 110M GeForce Go 7300

[dimi]

Code: Select all

Snapshot created on: 20200915_1434
System:    Host: <filter> Kernel: 4.19.0-9-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: quiet nosplash 
           Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: N/A 
           Distro: MX-19.4_x64 patito feo May 31  2020 base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Laptop System: ASUSTeK product: F3JC v: 1.0 serial: <filter> Chassis: type: 10 
           serial: N/A 
           Mobo: ASUSTeK model: F3JC v: 1.0 serial: <filter> BIOS: American Megatrends v: 305 
           date: 02/15/2007 
Battery:   ID-1: BAT0 charge: 1.7 Wh condition: 1.8/50.6 Wh (4%) volts: 12.4/11.1 
           model: ASUSTEK F3---24 type: Li-ion serial: <filter> status: Unknown 
CPU:       Topology: Dual Core model: Intel Core2 T5500 bits: 64 type: MCP arch: Core Merom 
           family: 6 model-id: F (15) stepping: 6 microcode: D1 L1 cache: 64 KiB 
           L2 cache: 2048 KiB 
           flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 6649 
           Speed: 997 MHz min/max: 996/1660 MHz Core speeds (MHz): 1: 997 2: 997 
           Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA G72M [Quadro NVS 110M/GeForce Go 7300] vendor: ASUSTeK 
           driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:01d7 
           Display: server: X.Org 1.20.4 driver: nouveau unloaded: fbdev,modesetting,vesa 
           alternate: nv resolution: 1280x800~60Hz 
           OpenGL: renderer: NV46 v: 2.1 Mesa 18.3.6 direct render: Yes 
Audio:     Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: ASUSTeK 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8 
           Sound Server: ALSA v: k4.19.0-9-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK 
           driver: r8169 v: kernel port: c800 bus ID: 02:00.0 chip ID: 10ec:8168 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel PRO/Wireless 3945ABG [Golan] Network driver: iwl3945 v: in-tree:s 
           port: c800 bus ID: 03:00.0 chip ID: 8086:4222 
           IF: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 116.93 GiB used: 13.90 GiB (11.9%) 
           ID-1: /dev/sda vendor: SanDisk model: SDSSDP064G size: 59.63 GiB block size: 
           physical: 512 B logical: 512 B speed: <unknown> serial: <filter> scheme: MBR 
           ID-2: /dev/sdb type: USB vendor: SanDisk model: Ultra USB 3.0 size: 57.30 GiB 
           block size: physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR 
Partition: ID-1: / raw size: 57.59 GiB size: 56.44 GiB (98.00%) used: 13.90 GiB (24.6%) fs: ext4 
           block size: 4096 B dev: /dev/sda1 
           ID-2: swap-1 size: 2.00 GiB used: 1.2 MiB (0.1%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 29.0 C mobo: N/A gpu: nouveau temp: 49 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
Info:      Processes: 198 Uptime: 14m Memory: 1.95 GiB used: 926.8 MiB (46.5%) Init: SysVinit 
           v: 2.93 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: quick-system-in (sudo) 
           running in: quick-system-in inxi: 3.0.36 

[Huckleberry Finn]

So, it looks ok now:

Graphics: Device-1: NVIDIA G72M [Quadro NVS 110M/GeForce Go 7300] vendor: ASUSTeK
driver: nouveau v: kernel bus ID: 01:00.0 chip ID: 10de:01d7
Display: server: X.Org 1.20.4 driver: nouveau

Then there's something else preventing boot ...

Where does it stop when you boot? Or what happens if you issue startX (after logging in manually) or pressing Ctrl+Alt+F7 ?

[dimi]

I have changed the list to Debian stretch and moved all lists to /home/user/repos to try to follow the method of @burrezo, but I got stuck in the middle.

[Huckleberry Finn]

What happens if you issue startx (after logging in manually) or pressing Ctrl+Alt+F7 ?

[dimi]

I need to install proprietary drivers via console. I have extracted them, and I am on just my way to sh the installer. I change to runlevel 3, but I want to terminate all applications so I can run it

[dimi]

What happens if you issue startx (after logging in manually) or pressing Ctrl+Alt+F7 ?

Ctrl+altl+F7 is doing nothing. startx gives me

Code: Select all

xinit: giving up xinit: unable to connect to X server: connection refused xinit: server error 

[tony37]

@dimi maybe that's because you have removed all xserver-xorg packages and haven't reinstalled them

Code: Select all

apt policy xserver-xorg-core xserver-xorg-video-all

[dimi]

ok @tony37 . Should I reinstall? My intention is different!

[tony37]

can you please give output if you want me to help you
of course you can't do anything without xserver-xorg-core

[dimi]

Code: Select all

xserver-xorg-core: 

Installed: (none)
candidate: (none)
version table: 2:1.20.4-1+deb10u3 -1
100 /var/lib/dpkg/status
xserver-xorg-video-all:
Installed: (none)
Candidate: (none)
version table: