Code: Select all
sudo sane-find-scannerCode: Select all
hp-pluginyes sir... it's same result.timkb4cq wrote: Wed Feb 03, 2021 11:58 pm Do you get the same message with?Code: Select all
sudo sane-find-scanner
plugin installed succesfully but the strange result with hp-doctor.timkb4cq wrote: Wed Feb 03, 2021 11:58 pm Hplip added support for the DeskJet aio 2300 series in 3.20.5. The changelogs don't show any changes to its support since then so 3.20.11 won't work any better than 3.20.9
I suspect the issue is related to the required non-free plug-in the DeskJet 2300 series requires.
Have you tried running?Code: Select all
hp-plugin
Code: Select all
Checking for Dependencies....
warning: unknown-18.3 version is not supported. Using unknown-0 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.19.0-13mx-amd64 #1 SMP Debian 4.19.160-2~mx17+1 (2020-12-04) GNU/Linux
Proc: 4.19.0-13mx-amd64 #1 SMP Debian 4.19.160-2~mx17+1 (2020-12-04) GNU/Linux
Distribution: unknown 18.3
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.20.9
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro 18.3 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.20.9
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.9
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.20.9
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 02/07/21 19:38:52
version = 3.20.9
[last_used]
device_uri = "hp:/usb/DeskJet_2300_series?serial=CN0CO236QJ"
printer_name =
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1601435311
notify_upgrade = false
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------
| COMPILEDEP |
--------------
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 6.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
------------------------
| General Dependencies |
------------------------
python3-xml Python XML libraries REQUIRED - 2.2.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.3.0 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.24' OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.4 OK -
python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.4 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.5.3 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.5.3 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 6.1.0 OK -
cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
sane SANE - Scanning library REQUIRED - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 4.11.4 MISSING 'python3-pyqt4-dbus needs to be installed'
sane-devel SANE - Scanning library development files REQUIRED - - OK -
cups-image CUPS image - CUPS image development files REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.9 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.9 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.20.9 OK -
hpmudext IO-Extension REQUIRED - 3.20.9 OK -
-------------------------
| External Dependencies |
-------------------------
dbus DBus - Message bus system REQUIRED - 1.10.32 OK -
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.32 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.18 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.25 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
--------------------------------------------- ------------------------
hp:/usb/DeskJet_2300_series?serial=CN0CO236QJ HP DeskJet 2300 series
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_DeskJet_2300_series
----------------------
Type: Printer
Device URI: hp:/usb/DeskJet_2300_series?serial=CN0CO236QJ
PPD: /etc/cups/ppd/HP_DeskJet_2300_series.ppd
PPD Description: HP Deskjet 2300 Series, hpcups 3.20.9
Printer status: printer HP_DeskJet_2300_series is idle. enabled since Sun 07 Feb 2021 07:30:43 PM WIB
Communication status: Good
--------------
| PERMISSION |
--------------
USB HP_DeskJet_2300_series Required - - OK Node:'/dev/bus/usb/004/005' Perm:' root lp rw- rw- rw- rw- rw- r--'
Checking Permissions....
Checking for Configured Queues....
Queue(s) configured correctly using HPLIP.
Checking for HP Properitery Plugin's....
No plug-in printers are configured.
Code: Select all
Xfce 4.14.2 tk : MX-19.4_x64 : Mobo: Gigabyte model: H61M-S2P-B3 : Intel Core i5-2400 : NVIDIA Quadro FX 380 : Qualcomm Atheros AR8151 v2.0 : SSD 860 EVO 250GB : Western Digital WD2500AAJS-75M0A0