Showfoto font size SOLVED

[Siles]

How do I increase size of fonts on title and tool bars? The font is too small to read without a magnifier. Could not find directions in user guide.

Siles

[JayM]

Please run MX Tools/Quick System Info, then right-click paste into a reply. (Quick System Info automatically copies the information to your clipboard, already formatted properly for pasting into the forum so all you have to do is a right-click/ paste, not a copy/paste.) Thanks.

[Eadwine Rose]

There are a few settings you can try:

In settings manager under Personal - window manager - title font, increase value.

In settings manager under Personal - appearance - fonts, increase top value.

In settings manager under Personal - appearance - settings, increase the scaling.




To add.. this will increase the size of all things in your install. Not just Showfoto, but it is worth a try if no other solution can be found.

[Stevo]

Also, in the command line:

Code: Select all

apt policy showfoto

You're still on MX 16.1, if we are to believe your sig.

[Siles]

(System: Host: mx Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64
root=UUID=d51d1117-511c-4c77-b3f3-32ab808cca49 ro quiet splash
Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0
Distro: MX-19_x64 patito feo October 21 2019 base: Debian GNU/Linux 10 (buster)
Machine: Type: Portable System: Dell product: Precision M6500 v: N/A serial: <filter> Chassis:
type: 8 serial: <filter>
Mobo: Dell model: 01RV5R serial: <filter> BIOS: Dell v: A10 date: 06/04/2013
Battery: ID-1: BAT0 charge: 60.2 Wh condition: 68.7/73.3 Wh (94%) volts: 12.3/11.1
model: SMP DELL H298F8A type: Li-ion serial: <filter> status: Unknown
CPU: Topology: Dual Core model: Intel Core i5 M 520 bits: 64 type: MT MCP arch: Nehalem
family: 6 model-id: 25 (37) stepping: 2 microcode: 11 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19152
Speed: 1260 MHz min/max: 1199/2400 MHz boost: enabled Core speeds (MHz): 1: 1260
2: 1240 3: 1250 4: 1309
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds
status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA G92GLM [Quadro FX 2800M] vendor: Dell driver: nouveau v: kernel
bus ID: 01:00.0 chip ID: 10de:061d
Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa
resolution: 1920x1200~58Hz
OpenGL: renderer: NV92 v: 3.3 Mesa 18.3.6 direct render: Yes
Audio: Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56
Sound Server: ALSA v: k4.19.0-6-amd64
Network: Device-1: Broadcom Limited NetXtreme BCM5761e Gigabit Ethernet PCIe vendor: Dell
driver: tg3 v: 3.137 port: df00 bus ID: 09:00.0 chip ID: 14e4:1680
IF: eth0 state: down mac: <filter>
Device-2: Broadcom Limited BCM4312 802.11b/g LP-PHY
vendor: Dell Wireless 1397 WLAN Mini-Card driver: wl v: kernel port: df00
bus ID: 0c:00.0 chip ID: 14e4:4315
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 2.09 TiB used: 83.37 GiB (3.9%)
ID-1: /dev/sda model: SSD2SC240G1CS1754D117-820 size: 223.57 GiB block size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s serial: <filter> rev: 1101 temp: 36 C
scheme: MBR
ID-2: /dev/sdb vendor: OCZ model: VERTEX3 size: 55.90 GiB block size: physical: 512 B
logical: 512 B speed: 3.0 Gb/s serial: <filter> rev: 2.25 temp: 30 C scheme: MBR
ID-3: /dev/sdc type: USB vendor: Western Digital model: WD My Book 25DA
size: 1.82 TiB block size: physical: 512 B logical: 512 B serial: <filter> rev: 3002
scheme: MBR
Partition: ID-1: / raw size: 98.90 GiB size: 96.85 GiB (97.92%) used: 17.66 GiB (18.2%) fs: ext4
dev: /dev/sda1
ID-2: /home raw size: 124.67 GiB size: 122.21 GiB (98.03%) used: 65.71 GiB (53.8%)
fs: ext4 dev: /dev/sda2
Sensors: System Temperatures: cpu: 46.0 C mobo: N/A sodimm: 44.0 C gpu: nouveau temp: 46 C
Fan Speeds (RPM): cpu: 2623
Repos: No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/buster buster main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian buster main contrib non-free
2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ buster main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Info: Processes: 223 Uptime: 1h 05m Memory: 7.78 GiB used: 1.02 GiB (13.1%) Init: SysVinit
v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3
running in: quick-system-in inxi: 3.0.36)

Actually in MX19. No problem in 18.3 but can not find any way to change the font size in taskbars ro a readable size. Only program with this problem. In fact Digikam font is perfect.

I just prefer showfoto to nomacs.

Forgot about sig updateing

Siles

[timkb4cq]

Showfoto is a Qt5 application. Changing the system font size in Qt5ct should do it.
For some reason, when you change the system font, Qt5ct jumps to italic or bold italic - set it back to regular before you save the setting.

[Siles]

Tim

How do I do that. Thanks
Siles

[timkb4cq]

If qt5ct is installed it will show up as Start -> Settings -> Qt 5 Settings
Install it if it's not there. Using it is pretty self evident.
n.b. Be patient. It takes longer for Qt5ct to start up than most applications. It takes 10 seconds to show up on the machine in my sig.

[Siles]

Tim

I installed QT5ct but when I run it i\I get the following error message:

"The QT_QPA_PLATFORMTHEME environment variable is not set correctly (current value: gtk2, required value: qt5ct)."

Also cannot use "apply" so nothing changes.

What now?

Siles

[timkb4cq]

When you run showfoto?
Change the theme in qt5ct to Fusion or another one you like.

I fixed that problem in Digikam, but Showfoto builds along with Digikam & I didn't know I had to fix that separately...