MX-19 RC1 Feedback thread

[nathan2423]

@BitJam...Just replicated snapshot problem here, too...same error, FAILURE : Cannot find in ISO image: -boot_image ... bin_path='/boot/isolinux/isolinux.bin'

I can confirm the same issue, and can confirm that no matter how many times you try, it fails the same way! ;-) Am currently running it with the updated template file that just came over the updater, using a 15gb home+root partitions, and can report now ..... SUCCESS PAST THAT ERROR ANYWAY ....

[richb]

@BitJam...Just replicated snapshot problem here, too...same error, FAILURE : Cannot find in ISO image: -boot_image ... bin_path='/boot/isolinux/isolinux.bin'

I can confirm the same issue, and can confirm that no matter how many times you try, it fails the same way! ;-) Am currently running it with the updated template file that just came over the updater, using a 15gb home+root partitions, and can report now ..... SUCCESS PAST THAT ERROR ANYWAY ....

Yes. That has fixed it, the 19.10.03 version

[Paul..]

@BitJam...Just replicated snapshot problem here, too...same error, FAILURE : Cannot find in ISO image: -boot_image ... bin_path='/boot/isolinux/isolinux.bin'

new mx-iso-template here: https://github.com/MX-Linux/mx-iso-temp ... b?raw=true

I did test this one before uploading

Works, here. Thanks, D_O

[tascoast]

I found a small improvement in my dual monitor setup, which was detected automatically, but required a couple of reboots and ARandR adjustments, whereby I think having defaults settings backed up finally locked in the monitors to correct arrangement (left-right as physically positioned, rather than hardware default that reversed arrangement on start-up.)

Screenshot also works better, no longer including an artifact of slightly different display proportions.

I did encounter an old issue common sometimes arising after installs of past versions of MX, that being Disk Manager not correctly recognising a NTFS, meaning that partition requires root access to write:

So I changed the Type to NTFS- 3g to resolve. I expect this will be a simple fix that is confirmed upon restarting the system

Trying to cheat a bit with Grub Customizer no longer works! I will need to reconsider how I approach editing Grub menus and study the fine print again. I have manually edited earlier Grub menus so should cope.

It doesn't bother me if I need to install MX-19 again when actually released

I quite like the font viewer inclusion and shall revisit some font collection to both explore and add. I can skip Waterfall, which I sometimes add for publishing needs.

Thank you to all contributing to this fine edition of MX and the hard work involved in getting translations and other detail polished up and included for eventual release, remarkably efficiently I should add.
Mick

Code: Select all

[code]
System:    Host: mx Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 
           root=UUID=d9ff2784-9c3e-4be2-9128-a6e5524c9aa4 ro quiet 
           Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-19RC1_x64 patito feo October 15  2019 base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop System: LENOVO product: 7522RU3 v: ThinkCentre A58 serial: <filter> 
           Mobo: LENOVO model: N/A serial: <filter> BIOS: LENOVO v: 5HKT52AUS date: 07/15/2010 
CPU:       Topology: Dual Core model: Intel Core2 Duo E7300 bits: 64 type: MCP arch: Penryn 
           family: 6 model-id: 17 (23) stepping: 6 microcode: 60F L2 cache: 3072 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 bogomips: 10638 
           Speed: 1596 MHz min/max: 1603/2670 MHz Core speeds (MHz): 1: 1596 2: 1596 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
Graphics:  Device-1: AMD Caicos XT [Radeon HD 7470/8470 / R5 235/310 OEM] vendor: Dell 
           driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:6778 
           Display: x11 server: X.Org 1.20.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1440x900~60Hz, 1680x1050~60Hz 
           OpenGL: renderer: AMD CAICOS (DRM 2.50.0 / 4.19.0-6-amd64 LLVM 7.0.1) 
           v: 3.3 Mesa 18.3.6 compat-v: 3.1 direct render: Yes 
Audio:     Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Lenovo 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Marvell 88E8057 PCI-E Gigabit Ethernet vendor: Lenovo driver: sky2 v: 1.30 
           port: e800 bus ID: 03:00.0 chip ID: 11ab:4380 
           IF: eth0 state: down mac: <filter> 
           IF-ID-1: usb0 state: unknown speed: N/A duplex: N/A mac: <filter> 
Drives:    Local Storage: total: 931.51 GiB used: 174.34 GiB (18.7%) 
           ID-1: /dev/sda vendor: Western Digital model: WD10EZEX-22MFCA0 size: 931.51 GiB 
           block size: physical: 4096 B logical: 512 B speed: <unknown> rotation: 7200 rpm 
           serial: <filter> rev: 1A01 scheme: MBR 
Partition: ID-1: / raw size: 22.19 GiB size: 21.71 GiB (97.87%) used: 11.49 GiB (52.9%) fs: ext4 
           dev: /dev/sda12 
           ID-2: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 38.0 C mobo: N/A gpu: radeon temp: 43 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/buster buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ buster main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 192 Uptime: 2m Memory: 3.85 GiB used: 548.7 MiB (13.9%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 al

Edit: https://drive.google.com/open?id=1ET7fa ... fVfYrySU1y (desktop screenshot)

[Paul..]

EDIT: Ignore below...booted USB snapshot drive successfully with boot option "xorg=nvidia" thanks to Eadwine Rose...

After recent Snapshot fix...ran some more tests
Spoke too soon, I guess. We may have a problem with the content of the Snapshot...maybe stuff missing...here's what happened

Ran Snapshot...used LUM to burn flashdrive....booted flashdrive (UEFI without persistence)....
- Terminal login prompt
- No X
- No nvidia driver
- No nouveau driver
- Tried installing nvidia as root "ddm-mx -i nvidia"...but ddm-mx indicated that nvidia driver was installed but not active...selected re-install...but no network available
- Then tried booting in 1024x768...vesa...no good

mx-snapshot.log

Code: Select all

2019-10-19 21:09:34.820 DBG default: mx-snapshot version: 19.10.01
2019-10-19 21:09:34.862 DBG default: mountpoint -q /live/aufs
2019-10-19 21:09:34.866 DBG default: lslogins --noheadings -u -o user | grep -vw root
2019-10-19 21:09:34.872 DBG default: "daddio"
2019-10-19 21:09:34.872 DBG default: uname -m
2019-10-19 21:09:34.876 DBG default: "x86_64"
2019-10-19 21:09:34.876 DBG default: cat /etc/debian_version | cut -f1 -d'.'
2019-10-19 21:09:34.880 DBG default: "10"
2019-10-19 21:09:34.880 DBG default: +++ void MainWindow::setup() +++
2019-10-19 21:09:34.920 DBG default: +++ void MainWindow::loadSettings() +++
2019-10-19 21:09:34.920 DBG default: +++ QString MainWindow::getFilename() +++
2019-10-19 21:09:34.920 DBG default: date +%Y%m%d_%H%M
2019-10-19 21:09:34.987 DBG default: "20191019_2109"
2019-10-19 21:09:34.994 DBG default: +++ void MainWindow::listFreeSpace() +++
2019-10-19 21:09:34.994 DBG default: df -h "/home" | awk 'NR==2 {print $4}'
2019-10-19 21:09:34.999 DBG default: "30G"
2019-10-19 21:09:35.000 DBG default: +++ QString MainWindow::getSnapshotSize() +++
2019-10-19 21:09:35.000 DBG default: find "/home/snapshot" -maxdepth 1 -type f -name '*.iso' -exec du -shc {} + | tail -1 | awk '{print $1}'
2019-10-19 21:09:35.007 DBG default: +++ int MainWindow::getSnapshotCount() +++
2019-10-19 21:09:35.007 DBG default: df -h / | awk 'NR==2 {print $3}'
2019-10-19 21:09:35.026 DBG default: "7.2G"
2019-10-19 21:09:35.026 DBG default: mountpoint -q /home
2019-10-19 21:09:37.608 DBG default: uname -r
2019-10-19 21:09:37.620 DBG default: "4.19.0-6-amd64"
2019-10-19 21:09:42.100 DBG default: [ -f /boot/config-$(uname -r) ]
2019-10-19 21:09:42.106 DBG default: grep ^CONFIG_SQUASHFS_LZ4=y /boot/config-$(uname -r)
2019-10-19 21:09:42.113 DBG default: "CONFIG_SQUASHFS_LZ4=y"
2019-10-19 21:09:44.424 DBG default: +++ void MainWindow::checkDirectories() +++
2019-10-19 21:09:44.424 DBG default: +++ bool MainWindow::isOnSupportedPart(QDir) +++
2019-10-19 21:09:44.424 DBG default: stat --file-system --format=%T /home/snapshot
2019-10-19 21:09:44.432 DBG default: "ext2/ext3"
2019-10-19 21:09:44.432 DBG default: detected partition "ext2/ext3" supported part: true
2019-10-19 21:09:44.432 DBG default: +++ QString MainWindow::largerFreeSpace(QString, QString, QString) +++
2019-10-19 21:09:44.432 DBG default: +++ QString MainWindow::largerFreeSpace(QString, QString) +++
2019-10-19 21:09:44.433 DBG default: df -k --output=avail /tmp 2>/dev/null | tail -n1
2019-10-19 21:09:44.437 DBG default: "30476404"
2019-10-19 21:09:44.437 DBG default: df -k --output=avail /home 2>/dev/null | tail -n1
2019-10-19 21:09:44.443 DBG default: "30476404"
2019-10-19 21:09:44.443 DBG default: +++ QString MainWindow::largerFreeSpace(QString, QString) +++
2019-10-19 21:09:44.443 DBG default: df -k --output=avail /tmp 2>/dev/null | tail -n1
2019-10-19 21:09:44.447 DBG default: "30476404"
2019-10-19 21:09:44.447 DBG default: df -k --output=avail /home/snapshot 2>/dev/null | tail -n1
2019-10-19 21:09:44.450 DBG default: "30476404"
2019-10-19 21:09:44.451 DBG default: mktemp -d "/tmp/mx-snapshot-XXXXXXXX"
2019-10-19 21:09:44.454 DBG default: "/tmp/mx-snapshot-zWPddX2P"
2019-10-19 21:09:44.462 DBG default: +++ void MainWindow::copyNewIso() +++
2019-10-19 21:09:44.468 DBG default: tar xf /usr/lib/iso-template/iso-template.tar.gz
2019-10-19 21:09:44.621 DBG default: cp /usr/lib/iso-template/template-initrd.gz iso-template/antiX/initrd.gz
2019-10-19 21:09:44.625 DBG default: cp /boot/vmlinuz-4.19.0-6-amd64 iso-template/antiX/vmlinuz
2019-10-19 21:09:44.632 DBG default: +++ void MainWindow::replaceMenuStrings() +++
2019-10-19 21:09:44.632 DBG default: date +'%d %B %Y'
2019-10-19 21:09:44.635 DBG default: "19 October 2019"
2019-10-19 21:09:44.635 DBG default: cat /etc/antix-version | cut -f1 -d'_'
2019-10-19 21:09:44.638 DBG default: "MX-19RC1"
2019-10-19 21:09:44.639 DBG default: grep -oP '(?<=DISTRIB_ID=).*' /etc/lsb-release
2019-10-19 21:09:44.644 DBG default: "MX"
2019-10-19 21:09:44.644 DBG default: cat /etc/antix-version | cut -f-2 -d' '
2019-10-19 21:09:44.648 DBG default: "MX-19RC1_x64 patito"
2019-10-19 21:09:44.648 DBG default: grep -oP '(?<=DISTRIB_CODENAME=).*' /etc/lsb-release
2019-10-19 21:09:44.653 DBG default: "\"patito feo\""
2019-10-19 21:09:44.653 DBG default: sed -i 's/%DISTRO_NAME%/MX/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/grub/grub.cfg"
2019-10-19 21:09:44.659 DBG default: sed -i 's/%OPTIONS%/quiet/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/syslinux/syslinux.cfg"
2019-10-19 21:09:44.664 DBG default: sed -i 's/%OPTIONS%/quiet/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/isolinux/isolinux.cfg"
2019-10-19 21:09:44.668 DBG default: sed -i 's/%FULL_DISTRO_NAME%/MX-19RC1_x64 patito/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/grub/grub.cfg"
2019-10-19 21:09:44.672 DBG default: sed -i 's/%FULL_DISTRO_NAME%/MX-19RC1_x64 patito/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/syslinux/syslinux.cfg"
2019-10-19 21:09:44.677 DBG default: sed -i 's/%FULL_DISTRO_NAME%/MX-19RC1_x64 patito/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/syslinux/readme.msg"
2019-10-19 21:09:44.682 DBG default: sed -i 's/%FULL_DISTRO_NAME%/MX-19RC1_x64 patito/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/isolinux/isolinux.cfg"
2019-10-19 21:09:44.688 DBG default: sed -i 's/%FULL_DISTRO_NAME%/MX-19RC1_x64 patito/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/isolinux/readme.msg"
2019-10-19 21:09:44.692 DBG default: sed -i 's/%DISTRO%/MX-19RC1/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/grub/theme/theme.txt"
2019-10-19 21:09:44.696 DBG default: sed -i 's/%DISTRO%/MX-19RC1/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/grub/grub.cfg"
2019-10-19 21:09:44.700 DBG default: sed -i 's/%RELEASE_DATE%/19 October 2019/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/grub/grub.cfg"
2019-10-19 21:09:44.706 DBG default: sed -i 's/%RELEASE_DATE%/19 October 2019/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/syslinux/syslinux.cfg"
2019-10-19 21:09:44.711 DBG default: sed -i 's/%RELEASE_DATE%/19 October 2019/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/syslinux/readme.msg"
2019-10-19 21:09:44.717 DBG default: sed -i 's/%RELEASE_DATE%/19 October 2019/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/isolinux/isolinux.cfg"
2019-10-19 21:09:44.722 DBG default: sed -i 's/%RELEASE_DATE%/19 October 2019/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/isolinux/readme.msg"
2019-10-19 21:09:44.728 DBG default: sed -i 's/%CODE_NAME%/"patito feo"/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/syslinux/syslinux.cfg"
2019-10-19 21:09:44.733 DBG default: sed -i 's/%CODE_NAME%/"patito feo"/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/isolinux/isolinux.cfg"
2019-10-19 21:09:44.737 DBG default: sed -i 's/%ASCII_CODE_NAME%/"patito feo"/g' "/tmp/mx-snapshot-zWPddX2P/iso-template/boot/grub/theme/theme.txt"
2019-10-19 21:09:44.743 DBG default: /usr/share/mx-packageinstaller/scripts/make-efi-img /tmp/mx-snapshot-zWPddX2P/iso-template/
2019-10-19 21:09:44.749 WRN default: "Missing file /tmp/mx-snapshot-zWPddX2P/iso-template/EFI/BOOT/BOOTx64.EFI"
2019-10-19 21:09:44.749 WRN default: "Missing file /tmp/mx-snapshot-zWPddX2P/iso-template/EFI/BOOT/bootx64.efi"
2019-10-19 21:09:44.755 WRN default: "Missing file /tmp/mx-snapshot-zWPddX2P/iso-template/EFI/BOOT/fallback.efi"
2019-10-19 21:09:44.755 WRN default: "Missing file /tmp/mx-snapshot-zWPddX2P/iso-template/EFI/BOOT/mt86.png"
2019-10-19 21:09:44.758 DBG default: "Kilobytes needed: 2112"
2019-10-19 21:09:44.758 DBG default: "Try size: 2142  margin: 30"
2019-10-19 21:09:45.031 DBG default: "Final size: 2152  margin: 40"
2019-10-19 21:09:45.096 WRN default: "rmdir: failed to remove '/tmp/make-efi-img/mp'"
2019-10-19 21:09:45.096 WRN default: ": Directory not empty"
2019-10-19 21:09:45.098 WRN default: "rmdir: failed to remove '/tmp/make-efi-img': Directory not empty"
2019-10-19 21:09:45.098 DBG default: "make-efi-img created boot/grub/efi.img"
2019-10-19 21:09:45.098 DBG default: +++ void MainWindow::makeMd5sum(QString, QString) +++
2019-10-19 21:09:45.098 DBG default: sync
2019-10-19 21:09:45.119 DBG default: md5sum "vmlinuz">"/tmp/mx-snapshot-zWPddX2P/iso-template/antiX/vmlinuz.md5"
2019-10-19 21:09:45.138 DBG default: mktemp -d
2019-10-19 21:09:45.142 DBG default: "/tmp/tmp.1Ev4kcueUC"
2019-10-19 21:09:45.142 DBG default: +++ void MainWindow::openInitrd(QString, QString) +++
2019-10-19 21:09:45.142 DBG default: chmod a+rx "/tmp/tmp.1Ev4kcueUC"
2019-10-19 21:09:45.146 DBG default: gunzip -c "/tmp/mx-snapshot-zWPddX2P/iso-template/antiX/initrd.gz" | cpio -idum
2019-10-19 21:09:45.194 WRN default: "7177 blocks"
2019-10-19 21:09:45.195 DBG default: test -d "/tmp/tmp.1Ev4kcueUC/lib/modules" && rm -r "/tmp/tmp.1Ev4kcueUC/lib/modules"
2019-10-19 21:09:45.198 DBG default: test -r /usr/local/share/live-files/files/etc/initrd-release && cp /usr/local/share/live-files/files/etc/initrd-release "/tmp/tmp.1Ev4kcueUC/etc"
2019-10-19 21:09:45.201 DBG default: test -r /etc/initrd-release && cp /etc/initrd-release "/tmp/tmp.1Ev4kcueUC/etc"
2019-10-19 21:09:45.206 DBG default: /usr/share/mx-packageinstaller/scripts/copy-initrd-modules -t="/tmp/tmp.1Ev4kcueUC" -k="4.19.0-6-amd64"
2019-10-19 21:09:45.232 WRN default: "modprobe: WARNING: Module aufs not found in directory /lib/modules/4.19.0-6-amd64\nmodprobe: WARNING: Module block not found in directory /lib/modules/4.19.0-6-amd64"
2019-10-19 21:09:45.232 WRN default: "modprobe: WARNING: Module fotg210-hcd not found in directory /lib/modules/4.19.0-6-amd64\nmodprobe: WARNING: Module fusbh200-hcd not found in directory /lib/modules/4.19.0-6-amd64"
2019-10-19 21:09:45.232 WRN default: "modprobe: WARNING: Module hid-lenovo-tpkbd not found in directory /lib/modules/4.19.0-6-amd64"
2019-10-19 21:09:45.233 WRN default: "modprobe: WARNING: Module hyperv not found in directory /lib/modules/4.19.0-6-amd64"
2019-10-19 21:09:45.233 WRN default: "modprobe: WARNING: Module jbd not found in directory /lib/modules/4.19.0-6-amd64"
2019-10-19 21:09:45.233 WRN default: "modprobe: WARNING: Module ntfs not found in directory /lib/modules/4.19.0-6-amd64"
2019-10-19 21:09:45.234 WRN default: "modprobe: WARNING: Module pcie-aspm not found in directory /lib/modules/4.19.0-6-amd64"
2019-10-19 21:09:45.234 WRN default: "modprobe: WARNING: Module printk not found in directory /lib/modules/4.19.0-6-amd64\nmodprobe: WARNING: Module rts5139 not found in directory /lib/modules/4.19.0-6-amd64"
2019-10-19 21:09:45.234 WRN default: "modprobe: WARNING: Module shpchp not found in directory /lib/modules/4.19.0-6-amd64"
2019-10-19 21:09:45.887 DBG default: /usr/share/mx-packageinstaller/scripts/copy-initrd-programs --to="/tmp/tmp.1Ev4kcueUC"
2019-10-19 21:09:45.897 DBG default: "add program: ntfs-3g"
2019-10-19 21:09:45.976 DBG default: "ld_linux: /lib64/ld-linux-x86-64.so.2"
2019-10-19 21:09:45.980 DBG default: "ld_dir: /tmp/tmp.1Ev4kcueUC/lib/x86_64-linux-gnu"
2019-10-19 21:09:45.998 DBG default: "add program: eject"
2019-10-19 21:09:46.027 DBG default: "ld_linux: /lib64/ld-linux-x86-64.so.2"
2019-10-19 21:09:46.028 DBG default: "ld_dir: /tmp/tmp.1Ev4kcueUC/lib/x86_64-linux-gnu"
2019-10-19 21:09:46.040 DBG default: +++ void MainWindow::closeInitrd(QString, QString) +++
2019-10-19 21:09:46.040 DBG default: (find . | cpio -o -H newc --owner root:root | gzip -9) >"/tmp/mx-snapshot-zWPddX2P/iso-template/antiX/initrd.gz"
2019-10-19 21:09:55.289 WRN default: "55706 blocks"
2019-10-19 21:09:55.303 DBG default: rm -r /tmp/tmp.1Ev4kcueUC
2019-10-19 21:09:55.331 DBG default: +++ void MainWindow::makeMd5sum(QString, QString) +++
2019-10-19 21:09:55.331 DBG default: sync
2019-10-19 21:09:55.335 WRN default: "shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory"
2019-10-19 21:09:55.343 DBG default: md5sum "initrd.gz">"/tmp/mx-snapshot-zWPddX2P/iso-template/antiX/initrd.gz.md5"
2019-10-19 21:09:55.368 DBG default: +++ void MainWindow::mkDir(QString) +++
2019-10-19 21:09:55.368 DBG default: +++ void MainWindow::savePackageList(QString) +++
2019-10-19 21:09:55.368 DBG default: dpkg -l | grep ^ii\ \ | awk '{print $2,$3}' | sed 's/:'$(dpkg --print-architecture)'//' | column -t >"/tmp/mx-snapshot-zWPddX2P/iso-template/snapshot-20191019_2109/package_list"
2019-10-19 21:09:55.417 DBG default: +++ void MainWindow::setupEnv() +++
2019-10-19 21:09:55.417 DBG default: mountpoint /boot
2019-10-19 21:09:55.420 DBG default: "/boot is not a mountpoint"
2019-10-19 21:09:55.420 DBG default: +++ bool MainWindow::checkInstalled(QString) +++
2019-10-19 21:09:55.421 DBG default: dpkg -s mx-installer | grep Status
2019-10-19 21:09:55.451 DBG default: "Status: install ok installed"
2019-10-19 21:09:55.452 DBG default: echo /home/*/Desktop | xargs -n1 cp /usr/share/applications/minstall.desktop 2>/dev/null
2019-10-19 21:09:55.459 DBG default: chmod +x /home/*/Desktop/minstall.desktop
2019-10-19 21:09:55.464 DBG default: installed-to-live -b /.bind-root start bind=/home live-files version-file adjtime read-only
2019-10-19 21:09:55.924 DBG default: +++ bool MainWindow::createIso(QString) +++
2019-10-19 21:09:55.924 DBG default: +++ void MainWindow::addRemoveExclusion(bool, QString) +++
2019-10-19 21:09:55.925 DBG default: +++ void MainWindow::addRemoveExclusion(bool, QString) +++
2019-10-19 21:09:55.925 DBG default: mksquashfs /.bind-root iso-template/antiX/linuxfs -comp lz4 -wildcards -ef /usr/local/share/excludes/mx-snapshot-exclude.list -e "home/snapshot" "tmp/mx-snapshot-zWPddX2P"
2019-10-19 21:09:58.432 DBG default: "Parallel mksquashfs: Using 8 processors\nCreating 4.0 filesystem on iso-template/antiX/linuxfs, block size 131072.\n\r[=========/                                                ]  40800/232720  17%"
2019-10-19 21:10:02.706 DBG default: "[=========================================================\\] 232720/232720 100%"
2019-10-19 21:10:02.733 DBG default: "Exportable Squashfs 4.0 filesystem, lz4 compressed, data block size 131072\n\tcompressed data, compressed metadata, compressed fragments, compressed xattrs\n\tduplicates are removed\nFilesystem size 3378038.72 Kbytes (3298.87 Mbytes)\n\t52.90% of uncompressed filesystem size (6385519.43 Kbytes)\nInode table size 4337666 bytes (4236.00 Kbytes)\n\t39.70% of uncompressed inode table size (10927335 bytes)\nDirectory table size 4484996 bytes (4379.88 Kbytes)\n\t56.17% of uncompressed directory table size (7984114 bytes)\nXattr table size 58 bytes (0.06 Kbytes)\n\t48.33% of uncompressed xattr table size (120 bytes)\nNumber of duplicate files found 19139\nNumber of inodes 301524\nNumber of files 201981\nNumber of fragments 12364\nNumber of symbolic links  83770\nNumber of device nodes 0\nNumber of fifo nodes 0\nNumber of socket nodes 24\nNumber of directories 15749\nNumber of ids (unique uids + gids) 32\nNumber of uids 10\n\troot (0)\n\tlp (7)\n\tdaddio (1000)\n\t_apt (100)\n\tman (6)\n\tcolord (114)\n\tlightdm (118)\n\tstatd (109)\n\tntp (105)\n\tnm-openvpn (112)\nNumber of gids 26\n\troot (0)\n\tdip (30)\n\tlp (7)\n\tshadow (42)\n\tssl-cert (110)\n\tdialout (20)\n\tdaddio (1000)\n\ttty (5)\n\tcrontab (108)\n\tmail (8)\n\tmlocate (115)\n\tplugdev (46)\n\tssh (116)\n\tgames (60)\n\tmessagebus (113)\n\tutmp (43)\n\tstaff (50)\n\tlpadmin (111)\n\tman (12)\n\tcolord (121)\n\tlightdm (128)\n\tnogroup (65534)\n\tntp (112)\n\tnm-openvpn (120)\n\tsambashare (127)\n\tadm (4)"
2019-10-19 21:10:02.801 DBG default: +++ void MainWindow::makeMd5sum(QString, QString) +++
2019-10-19 21:10:02.801 DBG default: sync
2019-10-19 21:10:02.816 DBG default: md5sum "linuxfs">"/tmp/mx-snapshot-zWPddX2P/iso-template/antiX/linuxfs.md5"
2019-10-19 21:10:08.448 DBG default: mv iso-template/antiX/linuxfs* iso-2/antiX
2019-10-19 21:10:08.452 DBG default: installed-to-live cleanup
2019-10-19 21:10:09.705 DBG default: xorriso -as mkisofs -l -V MXLIVE -R -J -pad -iso-level 3 -no-emul-boot -boot-load-size 4 -boot-info-table -b boot/isolinux/isolinux.bin  -eltorito-alt-boot -e boot/grub/efi.img -no-emul-boot -c boot/isolinux/isolinux.cat -o "/home/snapshot/snapshot-20191019_2109.iso" . "/tmp/mx-snapshot-zWPddX2P/iso-2"
2019-10-19 21:10:09.711 WRN default: "xorriso 1.5.0 : RockRidge filesystem manipulator, libburnia project."
2019-10-19 21:10:09.716 WRN default: "Drive current: -outdev 'stdio:/home/snapshot/snapshot-20191019_2109.iso'\nMedia current: stdio file, overwriteable\nMedia status : is blank\nMedia summary: 0 sessions, 0 data blocks, 0 data, 25.8g free"
2019-10-19 21:10:09.735 WRN default: "Added to ISO image: directory '/'='/tmp/mx-snapshot-zWPddX2P/iso-template'\nxorriso : UPDATE :     926 files added in 1 seconds"
2019-10-19 21:10:09.738 WRN default: "Added to ISO image: directory '/'='/tmp/mx-snapshot-zWPddX2P/iso-2'\nxorriso : UPDATE :     929 files added in 1 seconds"
2019-10-19 21:10:09.842 WRN default: "xorriso : UPDATE :  2.57% done"
2019-10-19 21:10:10.343 WRN default: "xorriso : UPDATE :  14.96% done"
2019-10-19 21:10:11.344 WRN default: "xorriso : UPDATE :  37.40% done"
2019-10-19 21:10:12.345 WRN default: "xorriso : UPDATE :  59.99% done, estimate finish Sat Oct 19 21:10:14 2019"
2019-10-19 21:10:13.347 WRN default: "xorriso : UPDATE :  74.23% done, estimate finish Sat Oct 19 21:10:15 2019"
2019-10-19 21:10:14.348 WRN default: "xorriso : UPDATE :  84.08% done"
2019-10-19 21:10:15.349 WRN default: "xorriso : UPDATE :  93.96% done"
2019-10-19 21:10:16.350 WRN default: "xorriso : UPDATE :  99.72% done"
2019-10-19 21:10:17.351 WRN default: "ISO image produced: 1705381 sectors\nWritten to medium : 1705381 sectors at LBA 0"
2019-10-19 21:10:17.354 WRN default: "Writing to 'stdio:/home/snapshot/snapshot-20191019_2109.iso' completed successfully."
2019-10-19 21:10:17.358 DBG default: isohybrid --uefi "/home/snapshot/snapshot-20191019_2109.iso"
2019-10-19 21:10:17.366 WRN default: "isohybrid: Warning: more than 1024 cylinders: 3331\nisohybrid: Not all BIOSes will be able to boot this device"
2019-10-19 21:10:17.399 DBG default: +++ void MainWindow::makeMd5sum(QString, QString) +++
2019-10-19 21:10:17.399 DBG default: sync
2019-10-19 21:10:17.414 DBG default: md5sum "snapshot-20191019_2109.iso">"/home/snapshot/snapshot-20191019_2109.iso.md5"
2019-10-19 21:10:23.181 DBG default: +++ void MainWindow::makeSha512sum(QString, QString) +++
2019-10-19 21:10:23.181 DBG default: sync
2019-10-19 21:10:23.201 DBG default: sha512sum "snapshot-20191019_2109.iso">"/home/snapshot/snapshot-20191019_2109.iso.sha512"
2019-10-19 21:10:32.924 DBG default: "Snapshot took 00:00:48 to finish."
2019-10-19 21:10:32.924 DBG default: +++ void MainWindow::cleanUp() +++
2019-10-19 21:10:32.924 DBG default: sync
2019-10-19 21:10:36.470 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1730, resource id: 23074531, major code: 40 (TranslateCoords), minor code: 0

mx-live-usb-maker.log

Code: Select all

2019-10-19 21:11:19.078 DBG default: mx-live-usb-maker version: 19.10
2019-10-19 21:11:19.114 DBG default: df -T / |tail -n1 |awk '{print $2}'
2019-10-19 21:11:19.120 DBG default: live-usb-maker --help | grep data-first
2019-10-19 21:11:19.173 DBG default: lsblk --nodeps -nlo name,size,model,vendor -I 3,8,22,179,259
2019-10-19 21:11:19.213 DBG default: . /usr/local/lib/cli-shell-utils/cli-shell-utils.bash;get_drive $(get_live_dev) 
2019-10-19 21:11:43.569 DBG default: Options:  "-N "
2019-10-19 21:11:43.589 DBG default: start io is  114848
2019-10-19 21:11:43.589 DBG default: max progress bar is  6936736
2019-10-19 21:11:43.590 DBG default: live-usb-maker gui -N -C off --from="/home/snapshot/snapshot-20191019_2109.iso" -t /dev/sdb
2019-10-19 21:14:11.333 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1469, resource id: 23083310, major code: 40 (TranslateCoords), minor code: 0
2019-10-19 21:14:12.105 DBG default: ""

[Eadwine Rose]

Try booting the snapshot with an edited grub. Add this:

xorg=nvidia


see if that helps. It won't boot to a desktop for me otherwise (and that is snapshot made in 18.3).

[Paul..]

Try booting the snapshot with an edited grub. Add this:

xorg=nvidia


see if that helps. It won't boot to a desktop for me otherwise (and that is snapshot made in 18.3).

Hahaha...Perfect...Thanks, ER! (will edit post above...)

[Eadwine Rose]

Great!! You can thank DO for that one, he helped me out with it back when and gave me that little boot option.

[fehlix]

Try booting the snapshot with an edited grub. Add this:

xorg=nvidia


see if that helps. It won't boot to a desktop for me otherwise (and that is snapshot made in 18.3).

Hahaha...Perfect...Thanks, ER! (will edit post above...)

Would you mind trying the new vcard=menu boot option and select the found nvidia card.

[asqwerth]

I"m having a weird message when I try to upgrade:

Code: Select all

sudo apt update
[sudo] password for tuaztest: 
Get:1 http://deb.debian.org/debian buster-updates InRelease [49.3 kB]    
Hit:2 http://iso.mxrepo.com/antix/buster buster InRelease                            
Hit:3 http://mxrepo.com/mx/repo buster InRelease                                     
Hit:4 http://deb.debian.org/debian buster InRelease
Hit:5 http://deb.debian.org/debian-security buster/updates InRelease
Fetched 49.3 kB in 2s (21.6 kB/s)
Reading package lists... Done
Building dependency tree       
Reading state information... Done
1 package can be upgraded. Run 'apt list --upgradable' to see it.

tuaztest@mx:~
$ sudo apt full-upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages have been kept back:
  mx-apps
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
tuaztest@mx:~

The update was also held back if MX-updater was used.

Using Synaptic tells me the chroot-rescue will be removed and replaced by chroot-rescue-mx. Is that ok?

I'm puzzled because I used the "full-upgrade" command in terminal, which is supposed to accept removal of packages and installation of new ones, right?