MX-19 Beta 3 Feedback

[m_pav]

MX-Snapshpot has an error in the text displaying the location of the snapshot-exclude.list
The text says it's in /usr/lib/mx-snapshot/snapshot-exclude.list

The reality is it's in /etc/mx-snapshot-exclude.list
or /usr/local/share/excludes/snapshot-exclude.list
It's gotta be one of them.
The latter location includes other config files for MX-Snapshot and the snapshot-exclude.list therein is a symlink to the former, so I believe we need to change the text to show the latter.

Screenshot-55.png

[dolphin_oracle]

thank you for the logs.

but all that doesn't explain the problem you had with installing onto existing partitions.

if you could, could you provide the following:

1. start up a live-USB.

2. run

Code: Select all

lsblk -brno TYPE,NAME,UUID,SIZE,PARTTYPE,FSTYPE,LABEL,MODEL

3. run gparted and FORMAT some partitions. do not create new partition tables.

4. when done, close gparted and run this again

Code: Select all

lsblk -brno TYPE,NAME,UUID,SIZE,PARTTYPE,FSTYPE,LABEL,MODEL

5. post the output of both lsblk commands.

thanks!!!

[slipperyslope]

MP3GAIN ( from Stable repo) - Packages has unmet dependencies
I searched and could not find any open threads, but don't know if MP3GAIN is going to be supported anymore.
However I'll report what I've seen and done.
After receiving error for unmet dependencies I installed DEB files from Jessie which are not located in MX repos
Install
1) gcc-4.8-base_4.8.4-1_amd64
2) libasan0_4.8.4-1_amd64
Run
3) MP3GAIN from MX Package Installer Stable Repo -completed-

I also noted the GUI for MP3GAIN is no longer in the MX Repos. I found easymp3gain-data and easymp3gain-gtk in Jessie.

easymp3gain-data_0.5.0+svn135-5_all.deb
easymp3gain-gtk_0.5.0+svn135-5_amd64.deb

All this being said, I don't know if MX Devs are not going to or not able to support or if this is a work in progress. MP3 seemed
to install OK with what I ran noted above, but not a master of the command line so there you go. Thanks to the Devs and all
who help to make MX the best distro out there....I believe.

Error from first install attempt

Code: Select all

MP3GAIN Install Attempt 10/11/2019
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 mp3gain : Depends: libasan0 (>= 4.8) but it is not installable
E: Unable to correct problems, you have held broken packages.

Code: Select all

MXPI SESSION
mp3gain
2019-10-11 13:52:28.109 DBG default: "Reading package lists..."
2019-10-11 13:52:28.131 DBG default: ""
2019-10-11 13:52:28.140 DBG default: "Building dependency tree..."
2019-10-11 13:52:28.449 DBG default: "Reading state information..."
2019-10-11 13:52:28.451 DBG default: ""
2019-10-11 13:52:28.646 DBG default: "Some packages could not be installed. This may mean that you have\nrequested an impossible situation or if you are using the unstable\ndistribution that some required packages have not yet been created\nor been moved out of Incoming.\nThe following information may help to resolve the situation:\n\nThe following packages have unmet dependencies:"
2019-10-11 13:52:28.770 DBG default: "mp3gain : Depends: libasan0 (>= 4.8) but it is not installable"
2019-10-11 13:52:28.806 WRN default: "E: Unable to correct problems, you have held broken packages."
2019-10-11 13:52:28.809 DBG default: +++ QStringList MainWindow::listInstalled() +++
2019-10-11 13:52:28.809 DBG default: dpkg --get-selections | grep -v deinstall | cut -f1
2019-10-11 13:52:28.869 DBG default: +++ bool MainWindow::buildPackageLists(bool) +++
2019-10-11 13:52:28.869 DBG default: +++ void MainWindow::clearUi() +++
2019-10-11 13:52:29.069 DBG default: +++ bool MainWindow::downloadPackageList(bool) +++
2019-10-11 13:52:29.205 DBG default: +++ bool MainWindow::readPackageList(bool) +++
2019-10-11 13:52:29.211 DBG default: +++ void MainWindow::displayPackages() +++
2019-10-11 13:52:29.211 DBG default: +++ QHash<QString, VersionNumber> MainWindow::listInstalledVersions() +++
2019-10-11 13:52:29.211 DBG default: dpkg -l | grep '^ii'
2019-10-11 13:52:31.014 DBG default: +++ void MainWindow::updateInterface() +++
2019-10-11 13:52:31.055 DBG default: +++ void MainWindow::refreshPopularApps() +++
2019-10-11 13:52:31.058 DBG default: +++ QStringList MainWindow::listInstalled() +++
2019-10-11 13:52:31.059 DBG default: dpkg --get-selections | grep -v deinstall | cut -f1
2019-10-11 13:52:31.116 DBG default: +++ void MainWindow::displayPopularApps() const +++
2019-10-11 13:52:56.659 WRN qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 2682, resource id: 23086577, major code: 40 (TranslateCoords), minor code: 0
2019-10-11 13:55:16.553 DBG default: +++ void MainWindow::on_lineEdit_returnPressed() +++
2019-10-11 13:55:22.770 DBG default: +++ void MainWindow::on_lineEdit_returnPressed() +++
2019-10-11 13:55:25.188 DBG default: +++ void MainWindow::on_lineEdit_returnPressed() +++
2019-10-11 13:55:53.859 DBG default: +++ void MainWindow::on_buttonCancel_clicked() +++
2019-10-11 13:55:53.859 DBG default: +++ void MainWindow::cleanup() +++

[dolphin_oracle]

mp3gain is in the antiX repos, not the MX ones. I'll pass it along to them.

[slipperyslope]

mp3gain is in the antiX repos, not the MX ones. I'll pass it along to them.

Thank you.

[anticapitalista]

We have 2 options.

1. remove mp3gain from antiX repos (stretch, buster and beyond), which means it is dead as a package OR
2. I make available 2 debs that are needed - libasan0 and gcc-4.8-base

Which do you prefer?

[slipperyslope]

We have 2 options.

1. remove mp3gain from antiX repos (stretch, buster and beyond), which means it is dead as a package OR
2. I make available 2 debs that are needed - libasan0 and gcc-4.8-base

Which do you prefer?

Just an observation. I noticed all the packages are still available in MX 18.3 stable repo....stretch
I was planning on keeping my business laptop running MX 18.3 for the near future, but I obviously can't
speak for a dev or even user community.
I think I recall someone from Canonical maintaining this and some other media applications, but its been a while since I
looked around. Again this is just some FYI.

[anticapitalista]

@slipperyslope - thanks.

Adding those 2 debs to antiX repos (buster -19 series) will also make them available for MX-19.
We just need to make sure they work ok.
Seems like it is ok to do so.

[JayM]

@JayM

looking at your quick-system-info/inxi output above, I don't think you're nvidia drivers are installed all the way.

All I did was install the Nvidia drivers from the stable repo using the installation tool in MX Tools. I just ran it again, reinstalled the same drivers, rebooted, and have the same behavior with vlc and guvcview.

1. What in my QSI makes you think I have only a partial Nvidia installation? It looks OK to me, I'm getting the Nvidia splash screen at boot, I have video and a GUI...

2. Does my QSI look any different or better now that I've reinstalled the Nvidia driver?

Code: Select all

System:    Host: mx19b3 Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=/dev/sda5 
           Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-19beta-3_x64 patito feo September 22  2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Laptop System: Hewlett-Packard product: HP Pavilion dv6 Notebook PC 
           v: 049D210000241210000020000 serial: <filter> Chassis: type: 10 serial: <filter> 
           Mobo: Hewlett-Packard model: 3659 v: 32.25 serial: <filter> BIOS: Hewlett-Packard 
           v: F.1B date: 04/23/2010 
Battery:   ID-1: BAT0 charge: 38.4 Wh condition: 38.4/47.5 Wh (81%) volts: 12.4/10.8 
           model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Full 
CPU:       Topology: Dual Core model: Intel Core i5 M 430 bits: 64 type: MT MCP arch: Nehalem 
           family: 6 model-id: 25 (37) stepping: 2 microcode: 11 L2 cache: 3072 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 18090 
           Speed: 1376 MHz min/max: 1199/2267 MHz boost: enabled Core speeds (MHz): 1: 1380 
           2: 1419 3: 1362 4: 1412 
           Vulnerabilities: Type: l1tf 
           mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds 
           status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
Graphics:  Device-1: NVIDIA GT216M [GeForce GT 230M] vendor: Hewlett-Packard driver: nvidia 
           v: 340.107 bus ID: 01:00.0 chip ID: 10de:0a28 
           Display: x11 server: X.Org 1.20.4 driver: nvidia resolution: 1366x768~60Hz 
           OpenGL: renderer: N/A v: N/A direct render: N/A 
Audio:     Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Hewlett-Packard 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56 
           Device-2: NVIDIA GT216 HDMI Audio vendor: Hewlett-Packard driver: snd_hda_intel 
           v: kernel bus ID: 01:00.1 chip ID: 10de:0be2 
           Device-3: Philips s SAA7160 vendor: Avermedia driver: N/A bus ID: 04:00.0 
           chip ID: 1131:7160 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Broadcom Limited BCM43225 802.11b/g/n vendor: Hewlett-Packard driver: wl 
           v: kernel port: 7000 bus ID: 02:00.0 chip ID: 14e4:4357 
           IF: wlan0 state: up mac: <filter> 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: Hewlett-Packard driver: r8169 v: kernel port: 5000 bus ID: 03:00.0 
           chip ID: 10ec:8168 
           IF: eth0 state: down mac: <filter> 
Drives:    Local Storage: total: 480.21 GiB used: 6.58 GiB (1.4%) 
           ID-1: /dev/sda vendor: Seagate model: ST9500325AS size: 465.76 GiB block size: 
           physical: 512 B logical: 512 B speed: 3.0 Gb/s rotation: 5400 rpm serial: <filter> 
           rev: SDM1 scheme: MBR 
           ID-2: /dev/sdb type: USB vendor: Toshiba model: TransMemory size: 14.45 GiB 
           block size: physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR 
Partition: ID-1: / raw size: 48.00 GiB size: 47.00 GiB (97.91%) used: 6.58 GiB (14.0%) fs: ext4 
           dev: /dev/sda5 
           ID-2: swap-1 size: 2.03 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda6 
Sensors:   System Temperatures: cpu: 48.0 C mobo: N/A gpu: nvidia temp: 64 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb https://mirror.pregi.net/mx-linux-packages/antix//buster buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb https://mirror.pregi.net/mx-linux-packages/mx/repo/ buster main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 194 Uptime: 6m Memory: 3.78 GiB used: 837.6 MiB (21.6%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           running in: quick-system-in inxi: 3.0.36 

Here's this morning's apt history (it's still just after 9AM here):

Code: Select all

Start-Date: 2019-10-12  09:07:01
Commandline: apt-get install --reinstall -y linux-headers-4.19.0-6-amd64 build-essential firmware-linux-nonfree
Reinstall: linux-headers-4.19.0-6-amd64:amd64 (4.19.67-2+deb10u1), build-essential:amd64 (12.6), firmware-linux-nonfree:amd64 (20190717-1~mx19+1)
End-Date: 2019-10-12  09:07:16

Start-Date: 2019-10-12  09:07:20
Commandline: apt-get install --reinstall --install-recommends -y nvidia-legacy-340xx-driver nvidia-settings-legacy-340xx nvidia-legacy-340xx-kernel-dkms nvidia-xconfig
Reinstall: nvidia-settings-legacy-340xx:amd64 (340.107-2), nvidia-xconfig:amd64 (418.56-1), nvidia-legacy-340xx-kernel-dkms:amd64 (340.107-4), nvidia-legacy-340xx-driver:amd64 (340.107-4)

Xorg.0.log from today:

Code: Select all

[    25.754] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[    25.754] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[    25.754] Current Operating System: Linux mx19b3 4.19.0-6-amd64 #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20) x86_64
[    25.754] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=/dev/sda5
[    25.754] Build Date: 05 March 2019  08:11:12PM
[    25.754] xorg-server 2:1.20.4-1 (https://www.debian.org/support) 
[    25.754] Current version of pixman: 0.36.0
[    25.754] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    25.754] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.754] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 12 09:13:31 2019
[    25.782] (==) Using config file: "/etc/X11/xorg.conf"
[    25.782] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    25.782] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.962] (==) ServerLayout "Layout0"
[    25.962] (**) |-->Screen "Screen0" (0)
[    25.962] (**) |   |-->Monitor "Monitor0"
[    26.005] (**) |   |-->Device "Device0"
[    26.005] (**) |-->Input Device "Keyboard0"
[    26.005] (**) |-->Input Device "Mouse0"
[    26.005] (==) Automatically adding devices
[    26.005] (==) Automatically enabling devices
[    26.005] (==) Automatically adding GPU devices
[    26.005] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    26.317] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    26.317] 	Entry deleted from font path.
[    26.357] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    26.358] (==) ModulePath set to "/usr/lib/xorg/modules"
[    26.358] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    26.358] (WW) Disabling Keyboard0
[    26.358] (WW) Disabling Mouse0
[    26.358] (II) Loader magic: 0x55fbc3ff2e20
[    26.358] (II) Module ABI versions:
[    26.358] 	X.Org ANSI C Emulation: 0.4
[    26.358] 	X.Org Video Driver: 24.0
[    26.358] 	X.Org XInput driver : 24.1
[    26.358] 	X.Org Server Extension : 10.0
[    26.359] (++) using VT number 7

[    26.359] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    26.359] (II) xfree86: Adding drm device (/dev/dri/card0)
[    26.367] (--) PCI:*(1@0:0:0) 10de:0a28:103c:3659 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/131072
[    26.367] (II) LoadModule: "glx"
[    26.481] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    27.728] (II) Module glx: vendor="X.Org Foundation"
[    27.728] 	compiled for 1.20.4, module version = 1.0.0
[    27.728] 	ABI class: X.Org Server Extension, version 10.0
[    27.728] (II) LoadModule: "nvidia"
[    27.728] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    27.841] (II) Module nvidia: vendor="NVIDIA Corporation"
[    27.841] 	compiled for 4.0.2, module version = 1.0.0
[    27.841] 	Module class: X.Org Video Driver
[    27.847] (II) NVIDIA dlloader X Driver  340.107  Thu May 24 21:18:05 PDT 2018
[    27.847] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    27.859] (II) Loading sub module "fb"
[    27.859] (II) LoadModule: "fb"
[    27.859] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.882] (II) Module fb: vendor="X.Org Foundation"
[    27.882] 	compiled for 1.20.4, module version = 1.0.0
[    27.882] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    27.882] (WW) Unresolved symbol: fbGetGCPrivateKey
[    27.882] (II) Loading sub module "wfb"
[    27.882] (II) LoadModule: "wfb"
[    27.888] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    27.898] (II) Module wfb: vendor="X.Org Foundation"
[    27.898] 	compiled for 1.20.4, module version = 1.0.0
[    27.898] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    27.898] (II) Loading sub module "ramdac"
[    27.898] (II) LoadModule: "ramdac"
[    27.898] (II) Module "ramdac" already built-in
[    27.924] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    27.924] (==) NVIDIA(0): RGB weight 888
[    27.924] (==) NVIDIA(0): Default visual is TrueColor
[    27.924] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    27.954] (**) NVIDIA(0): Enabling 2D acceleration
[    27.954] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[    27.954] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[    27.954] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[    27.954] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[    27.954] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[    29.031] (II) NVIDIA(0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    29.032] (II) NVIDIA(0):     Vision stereo.
[    29.032] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[    29.036] (II) NVIDIA(0): NVIDIA GPU GeForce GT 230M (GT216) at PCI:1:0:0 (GPU-0)
[    29.036] (--) NVIDIA(0): Memory: 1048576 kBytes
[    29.037] (--) NVIDIA(0): VideoBIOS: 70.16.25.00.25
[    29.037] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    29.039] (--) NVIDIA(0): Valid display device(s) on GeForce GT 230M at PCI:1:0:0
[    29.039] (--) NVIDIA(0):     CRT-0
[    29.039] (--) NVIDIA(0):     Seiko/Epson (DFP-0) (boot, connected)
[    29.039] (--) NVIDIA(0):     DFP-1
[    29.039] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    29.039] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal LVDS
[    29.039] (--) NVIDIA(GPU-0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[    29.039] (--) NVIDIA(0): DFP-1: Internal TMDS
[    29.039] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    29.039] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    29.039] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    29.039] (**) NVIDIA(0):     been enabled on all display devices.)
[    29.040] (==) NVIDIA(0): 
[    29.040] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    29.040] (==) NVIDIA(0):     will be used as the requested mode.
[    29.040] (==) NVIDIA(0): 
[    29.040] (II) NVIDIA(0): Validated MetaModes:
[    29.040] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    29.040] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[    30.106] (--) NVIDIA(0): DPI set to (102, 102); computed from "UseEdidDpi" X config
[    30.106] (--) NVIDIA(0):     option
[    30.106] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    30.130] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    30.500] (==) NVIDIA(0): Disabling shared memory pixmaps
[    30.501] (==) NVIDIA(0): Backing store enabled
[    30.501] (==) NVIDIA(0): Silken mouse enabled
[    30.503] (**) NVIDIA(0): DPMS enabled
[    30.517] (II) Loading sub module "dri2"
[    30.517] (II) LoadModule: "dri2"
[    30.517] (II) Module "dri2" already built-in
[    30.530] (II) NVIDIA(0): [DRI2] Setup complete
[    30.530] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    30.530] (II) Initializing extension Generic Event Extension
[    30.530] (II) Initializing extension SHAPE
[    30.531] (II) Initializing extension MIT-SHM
[    30.531] (II) Initializing extension XInputExtension
[    30.536] (II) Initializing extension XTEST
[    30.536] (II) Initializing extension BIG-REQUESTS
[    30.536] (II) Initializing extension SYNC
[    30.537] (II) Initializing extension XKEYBOARD
[    30.537] (II) Initializing extension XC-MISC
[    30.537] (II) Initializing extension SECURITY
[    30.537] (II) Initializing extension XFIXES
[    30.537] (II) Initializing extension RENDER
[    30.537] (II) Initializing extension RANDR
[    30.538] (II) Initializing extension COMPOSITE
[    30.538] (II) Initializing extension DAMAGE
[    30.538] (II) Initializing extension MIT-SCREEN-SAVER
[    30.538] (II) Initializing extension DOUBLE-BUFFER
[    30.539] (II) Initializing extension RECORD
[    30.539] (II) Initializing extension DPMS
[    30.539] (II) Initializing extension Present
[    30.539] (II) Initializing extension DRI3
[    30.539] (II) Initializing extension X-Resource
[    30.539] (II) Initializing extension XVideo
[    30.539] (II) Initializing extension XVideo-MotionCompensation
[    30.539] (II) Initializing extension SELinux
[    30.539] (II) SELinux: Disabled on system
[    30.539] (II) Initializing extension GLX
[    30.540] (II) AIGLX: Screen 0 is not DRI2 capable
[    32.271] (II) IGLX: Loaded and initialized swrast
[    32.271] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    32.271] (II) Initializing extension XFree86-VidModeExtension
[    32.271] (II) Initializing extension XFree86-DGA
[    32.271] (II) Initializing extension XFree86-DRI
[    32.271] (II) Initializing extension DRI2
[    32.271] (II) Initializing extension NV-GLX
[    32.271] (II) Initializing extension NV-CONTROL
[    32.272] (II) Initializing extension XINERAMA
[    32.632] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    32.632] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.632] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    32.632] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.632] (II) LoadModule: "evdev"
[    32.632] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.662] (II) Module evdev: vendor="X.Org Foundation"
[    32.662] 	compiled for 1.20.1, module version = 2.10.6
[    32.662] 	Module class: X.Org XInput Driver
[    32.662] 	ABI class: X.Org XInput driver, version 24.1
[    32.662] (II) Using input driver 'evdev' for 'Power Button'
[    32.662] (**) Power Button: always reports core events
[    32.662] (**) evdev: Power Button: Device: "/dev/input/event4"
[    32.662] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.662] (--) evdev: Power Button: Found keys
[    32.662] (II) evdev: Power Button: Configuring as keyboard
[    32.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[    32.662] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.662] (**) Option "xkb_rules" "evdev"
[    32.662] (**) Option "xkb_model" "pc105"
[    32.662] (**) Option "xkb_layout" "us"
[    32.662] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.699] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    32.699] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    32.699] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    32.699] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    32.699] (II) Using input driver 'evdev' for 'Video Bus'
[    32.699] (**) Video Bus: always reports core events
[    32.699] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    32.699] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    32.700] (--) evdev: Video Bus: Found keys
[    32.700] (II) evdev: Video Bus: Configuring as keyboard
[    32.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:02/input/input7/event5"
[    32.700] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    32.700] (**) Option "xkb_rules" "evdev"
[    32.700] (**) Option "xkb_model" "pc105"
[    32.700] (**) Option "xkb_layout" "us"
[    32.700] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.701] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    32.701] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.701] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    32.701] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.701] (II) Using input driver 'evdev' for 'Power Button'
[    32.701] (**) Power Button: always reports core events
[    32.701] (**) evdev: Power Button: Device: "/dev/input/event1"
[    32.701] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.701] (--) evdev: Power Button: Found keys
[    32.701] (II) evdev: Power Button: Configuring as keyboard
[    32.701] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[    32.701] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    32.701] (**) Option "xkb_rules" "evdev"
[    32.701] (**) Option "xkb_model" "pc105"
[    32.701] (**) Option "xkb_layout" "us"
[    32.702] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.703] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    32.703] (II) No input driver specified, ignoring this device.
[    32.703] (II) This device may have been added with another device file.
[    32.704] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    32.704] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.704] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    32.704] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.704] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.704] (**) Sleep Button: always reports core events
[    32.704] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    32.704] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    32.704] (--) evdev: Sleep Button: Found keys
[    32.704] (II) evdev: Sleep Button: Configuring as keyboard
[    32.704] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    32.704] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    32.704] (**) Option "xkb_rules" "evdev"
[    32.704] (**) Option "xkb_model" "pc105"
[    32.704] (**) Option "xkb_layout" "us"
[    32.704] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.705] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19)
[    32.705] (II) No input driver specified, ignoring this device.
[    32.705] (II) This device may have been added with another device file.
[    32.706] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event20)
[    32.706] (II) No input driver specified, ignoring this device.
[    32.706] (II) This device may have been added with another device file.
[    32.707] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event21)
[    32.707] (II) No input driver specified, ignoring this device.
[    32.707] (II) This device may have been added with another device file.
[    32.708] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event22)
[    32.708] (II) No input driver specified, ignoring this device.
[    32.708] (II) This device may have been added with another device file.
[    32.709] (II) config/udev: Adding input device COMPANY 2.4G Device (/dev/input/event6)
[    32.709] (**) COMPANY 2.4G Device: Applying InputClass "evdev keyboard catchall"
[    32.709] (**) COMPANY 2.4G Device: Applying InputClass "libinput keyboard catchall"
[    32.709] (**) COMPANY 2.4G Device: Applying InputClass "evdev keyboard catchall"
[    32.709] (II) Using input driver 'evdev' for 'COMPANY 2.4G Device'
[    32.709] (**) COMPANY 2.4G Device: always reports core events
[    32.709] (**) evdev: COMPANY 2.4G Device: Device: "/dev/input/event6"
[    32.709] (--) evdev: COMPANY 2.4G Device: Vendor 0x9da Product 0x2403
[    32.709] (--) evdev: COMPANY 2.4G Device: Found keys
[    32.709] (II) evdev: COMPANY 2.4G Device: Configuring as keyboard
[    32.710] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:09DA:2403.0001/input/input8/event6"
[    32.710] (II) XINPUT: Adding extended input device "COMPANY 2.4G Device" (type: KEYBOARD, id 10)
[    32.710] (**) Option "xkb_rules" "evdev"
[    32.710] (**) Option "xkb_model" "pc105"
[    32.710] (**) Option "xkb_layout" "us"
[    32.710] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.711] (II) config/udev: Adding input device COMPANY 2.4G Device Keyboard (/dev/input/event8)
[    32.712] (**) COMPANY 2.4G Device Keyboard: Applying InputClass "evdev keyboard catchall"
[    32.712] (**) COMPANY 2.4G Device Keyboard: Applying InputClass "libinput keyboard catchall"
[    32.712] (**) COMPANY 2.4G Device Keyboard: Applying InputClass "evdev keyboard catchall"
[    32.712] (II) Using input driver 'evdev' for 'COMPANY 2.4G Device Keyboard'
[    32.712] (**) COMPANY 2.4G Device Keyboard: always reports core events
[    32.712] (**) evdev: COMPANY 2.4G Device Keyboard: Device: "/dev/input/event8"
[    32.712] (--) evdev: COMPANY 2.4G Device Keyboard: Vendor 0x9da Product 0x2403
[    32.712] (--) evdev: COMPANY 2.4G Device Keyboard: Found keys
[    32.712] (II) evdev: COMPANY 2.4G Device Keyboard: Configuring as keyboard
[    32.712] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:09DA:2403.0002/input/input10/event8"
[    32.712] (II) XINPUT: Adding extended input device "COMPANY 2.4G Device Keyboard" (type: KEYBOARD, id 11)
[    32.712] (**) Option "xkb_rules" "evdev"
[    32.712] (**) Option "xkb_model" "pc105"
[    32.712] (**) Option "xkb_layout" "us"
[    32.712] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.713] (II) config/udev: Adding input device COMPANY 2.4G Device (/dev/input/event9)
[    32.713] (II) No input driver specified, ignoring this device.
[    32.713] (II) This device may have been added with another device file.
[    32.714] (II) config/udev: Adding input device COMPANY 2.4G Device Consumer Control (/dev/input/event10)
[    32.714] (**) COMPANY 2.4G Device Consumer Control: Applying InputClass "evdev keyboard catchall"
[    32.714] (**) COMPANY 2.4G Device Consumer Control: Applying InputClass "libinput keyboard catchall"
[    32.714] (**) COMPANY 2.4G Device Consumer Control: Applying InputClass "evdev keyboard catchall"
[    32.714] (II) Using input driver 'evdev' for 'COMPANY 2.4G Device Consumer Control'
[    32.714] (**) COMPANY 2.4G Device Consumer Control: always reports core events
[    32.714] (**) evdev: COMPANY 2.4G Device Consumer Control: Device: "/dev/input/event10"
[    32.714] (--) evdev: COMPANY 2.4G Device Consumer Control: Vendor 0x9da Product 0x2403
[    32.714] (--) evdev: COMPANY 2.4G Device Consumer Control: Found 1 mouse buttons
[    32.714] (--) evdev: COMPANY 2.4G Device Consumer Control: Found scroll wheel(s)
[    32.714] (--) evdev: COMPANY 2.4G Device Consumer Control: Found relative axes
[    32.714] (II) evdev: COMPANY 2.4G Device Consumer Control: Forcing relative x/y axes to exist.
[    32.714] (--) evdev: COMPANY 2.4G Device Consumer Control: Found absolute axes
[    32.714] (II) evdev: COMPANY 2.4G Device Consumer Control: Forcing absolute x/y axes to exist.
[    32.714] (--) evdev: COMPANY 2.4G Device Consumer Control: Found keys
[    32.714] (II) evdev: COMPANY 2.4G Device Consumer Control: Configuring as mouse
[    32.714] (II) evdev: COMPANY 2.4G Device Consumer Control: Configuring as keyboard
[    32.714] (II) evdev: COMPANY 2.4G Device Consumer Control: Adding scrollwheel support
[    32.714] (**) evdev: COMPANY 2.4G Device Consumer Control: YAxisMapping: buttons 4 and 5
[    32.714] (**) evdev: COMPANY 2.4G Device Consumer Control: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.714] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:09DA:2403.0002/input/input12/event10"
[    32.714] (II) XINPUT: Adding extended input device "COMPANY 2.4G Device Consumer Control" (type: KEYBOARD, id 12)
[    32.714] (**) Option "xkb_rules" "evdev"
[    32.714] (**) Option "xkb_model" "pc105"
[    32.714] (**) Option "xkb_layout" "us"
[    32.714] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.714] (II) evdev: COMPANY 2.4G Device Consumer Control: initialized for relative axes.
[    32.714] (WW) evdev: COMPANY 2.4G Device Consumer Control: ignoring absolute axes.
[    32.715] (**) COMPANY 2.4G Device Consumer Control: (accel) keeping acceleration scheme 1
[    32.715] (**) COMPANY 2.4G Device Consumer Control: (accel) acceleration profile 0
[    32.715] (**) COMPANY 2.4G Device Consumer Control: (accel) acceleration factor: 2.000
[    32.715] (**) COMPANY 2.4G Device Consumer Control: (accel) acceleration threshold: 4
[    32.716] (II) config/udev: Adding input device COMPANY 2.4G Device System Control (/dev/input/event11)
[    32.716] (**) COMPANY 2.4G Device System Control: Applying InputClass "evdev keyboard catchall"
[    32.716] (**) COMPANY 2.4G Device System Control: Applying InputClass "libinput keyboard catchall"
[    32.716] (**) COMPANY 2.4G Device System Control: Applying InputClass "evdev keyboard catchall"
[    32.716] (II) Using input driver 'evdev' for 'COMPANY 2.4G Device System Control'
[    32.716] (**) COMPANY 2.4G Device System Control: always reports core events
[    32.716] (**) evdev: COMPANY 2.4G Device System Control: Device: "/dev/input/event11"
[    32.716] (--) evdev: COMPANY 2.4G Device System Control: Vendor 0x9da Product 0x2403
[    32.716] (--) evdev: COMPANY 2.4G Device System Control: Found keys
[    32.716] (II) evdev: COMPANY 2.4G Device System Control: Configuring as keyboard
[    32.716] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:09DA:2403.0002/input/input13/event11"
[    32.716] (II) XINPUT: Adding extended input device "COMPANY 2.4G Device System Control" (type: KEYBOARD, id 13)
[    32.716] (**) Option "xkb_rules" "evdev"
[    32.716] (**) Option "xkb_model" "pc105"
[    32.716] (**) Option "xkb_layout" "us"
[    32.716] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.717] (II) config/udev: Adding input device COMPANY 2.4G Device Mouse (/dev/input/event7)
[    32.717] (**) COMPANY 2.4G Device Mouse: Applying InputClass "evdev pointer catchall"
[    32.717] (**) COMPANY 2.4G Device Mouse: Applying InputClass "libinput pointer catchall"
[    32.717] (**) COMPANY 2.4G Device Mouse: Applying InputClass "evdev pointer catchall"
[    32.717] (II) Using input driver 'evdev' for 'COMPANY 2.4G Device Mouse'
[    32.717] (**) COMPANY 2.4G Device Mouse: always reports core events
[    32.717] (**) evdev: COMPANY 2.4G Device Mouse: Device: "/dev/input/event7"
[    32.717] (--) evdev: COMPANY 2.4G Device Mouse: Vendor 0x9da Product 0x2403
[    32.717] (--) evdev: COMPANY 2.4G Device Mouse: Found 12 mouse buttons
[    32.717] (--) evdev: COMPANY 2.4G Device Mouse: Found scroll wheel(s)
[    32.717] (--) evdev: COMPANY 2.4G Device Mouse: Found relative axes
[    32.717] (--) evdev: COMPANY 2.4G Device Mouse: Found x and y relative axes
[    32.717] (II) evdev: COMPANY 2.4G Device Mouse: Configuring as mouse
[    32.717] (II) evdev: COMPANY 2.4G Device Mouse: Adding scrollwheel support
[    32.717] (**) evdev: COMPANY 2.4G Device Mouse: YAxisMapping: buttons 4 and 5
[    32.717] (**) evdev: COMPANY 2.4G Device Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.717] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:09DA:2403.0002/input/input9/event7"
[    32.717] (II) XINPUT: Adding extended input device "COMPANY 2.4G Device Mouse" (type: MOUSE, id 14)
[    32.717] (II) evdev: COMPANY 2.4G Device Mouse: initialized for relative axes.
[    32.717] (**) COMPANY 2.4G Device Mouse: (accel) keeping acceleration scheme 1
[    32.717] (**) COMPANY 2.4G Device Mouse: (accel) acceleration profile 0
[    32.718] (**) COMPANY 2.4G Device Mouse: (accel) acceleration factor: 2.000
[    32.718] (**) COMPANY 2.4G Device Mouse: (accel) acceleration threshold: 4
[    32.718] (II) config/udev: Adding input device COMPANY 2.4G Device Mouse (/dev/input/mouse0)
[    32.718] (II) No input driver specified, ignoring this device.
[    32.718] (II) This device may have been added with another device file.
[    32.719] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event16)
[    32.719] (II) No input driver specified, ignoring this device.
[    32.719] (II) This device may have been added with another device file.
[    32.719] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event17)
[    32.719] (II) No input driver specified, ignoring this device.
[    32.719] (II) This device may have been added with another device file.
[    32.720] (II) config/udev: Adding input device HDA Intel MID Front Line Out (/dev/input/event18)
[    32.720] (II) No input driver specified, ignoring this device.
[    32.720] (II) This device may have been added with another device file.
[    32.721] (II) config/udev: Adding input device HP Webcam: HP Webcam (/dev/input/event23)
[    32.721] (**) HP Webcam: HP Webcam: Applying InputClass "evdev keyboard catchall"
[    32.721] (**) HP Webcam: HP Webcam: Applying InputClass "libinput keyboard catchall"
[    32.721] (**) HP Webcam: HP Webcam: Applying InputClass "evdev keyboard catchall"
[    32.721] (II) Using input driver 'evdev' for 'HP Webcam: HP Webcam'
[    32.721] (**) HP Webcam: HP Webcam: always reports core events
[    32.721] (**) evdev: HP Webcam: HP Webcam: Device: "/dev/input/event23"
[    32.721] (--) evdev: HP Webcam: HP Webcam: Vendor 0x408 Product 0x3f1
[    32.721] (--) evdev: HP Webcam: HP Webcam: Found keys
[    32.721] (II) evdev: HP Webcam: HP Webcam: Configuring as keyboard
[    32.721] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input24/event23"
[    32.721] (II) XINPUT: Adding extended input device "HP Webcam: HP Webcam" (type: KEYBOARD, id 15)
[    32.721] (**) Option "xkb_rules" "evdev"
[    32.721] (**) Option "xkb_model" "pc105"
[    32.721] (**) Option "xkb_layout" "us"
[    32.721] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.722] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    32.722] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    32.722] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    32.722] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    32.722] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    32.722] (**) AT Translated Set 2 keyboard: always reports core events
[    32.722] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    32.722] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    32.722] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    32.722] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    32.722] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    32.722] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[    32.722] (**) Option "xkb_rules" "evdev"
[    32.722] (**) Option "xkb_model" "pc105"
[    32.722] (**) Option "xkb_layout" "us"
[    32.722] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.723] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[    32.723] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    32.723] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    32.723] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    32.723] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    32.723] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    32.723] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    32.723] (II) LoadModule: "synaptics"
[    32.723] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    32.754] (II) Module synaptics: vendor="X.Org Foundation"
[    32.754] 	compiled for 1.20.1, module version = 1.9.1
[    32.754] 	Module class: X.Org XInput Driver
[    32.754] 	ABI class: X.Org XInput driver, version 24.1
[    32.754] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    32.754] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.754] (**) Option "Device" "/dev/input/event12"
[    32.788] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 58)
[    32.788] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 106)
[    32.788] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    32.788] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    32.788] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[    32.788] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    32.788] (**) Option "VertEdgeScroll" "1"
[    32.788] (**) Option "HorizEdgeScroll" "1"
[    32.788] (**) Option "CornerCoasting" "1"
[    32.788] (**) Option "VertTwoFingerScroll" "1"
[    32.788] (**) Option "HorizTwoFingerScroll" "1"
[    32.788] (**) Option "RBCornerButton" "9"
[    32.788] (**) Option "LBCornerButton" "8"
[    32.788] (**) Option "TapButton1" "1"
[    32.788] (**) Option "TapButton2" "2"
[    32.788] (**) Option "TapButton3" "3"
[    32.788] (**) Option "CircularScrolling" "1"
[    32.788] (**) Option "CircScrollTrigger" "7"
[    32.788] (**) Option "MinSpeed" "0.5"
[    32.788] (**) Option "MaxSpeed" "1.0"
[    32.788] (**) Option "AccelFactor" "0.075"
[    32.788] (**) Option "CoastingSpeed" "8"
[    32.788] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    32.788] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.824] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event12"
[    32.824] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[    32.824] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.0
[    32.824] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 2.00
[    32.824] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.075
[    32.824] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    32.824] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    32.824] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    32.824] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    32.824] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    32.825] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    32.825] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    32.826] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event13)
[    32.826] (II) No input driver specified, ignoring this device.
[    32.826] (II) This device may have been added with another device file.
[    32.827] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    32.827] (II) No input driver specified, ignoring this device.
[    32.827] (II) This device may have been added with another device file.
[    32.828] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event14)
[    32.828] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    32.828] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    32.828] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    32.828] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    32.828] (**) HP WMI hotkeys: always reports core events
[    32.828] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event14"
[    32.829] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    32.829] (--) evdev: HP WMI hotkeys: Found keys
[    32.829] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    32.829] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event14"
[    32.829] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 18)
[    32.829] (**) Option "xkb_rules" "evdev"
[    32.829] (**) Option "xkb_model" "pc105"
[    32.829] (**) Option "xkb_layout" "us"
[    32.829] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.830] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event24)
[    32.830] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    32.830] (**) ACPI Virtual Keyboard Device: Applying InputClass "libinput keyboard catchall"
[    32.830] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    32.830] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    32.830] (**) ACPI Virtual Keyboard Device: always reports core events
[    32.830] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event24"
[    32.830] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    32.830] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    32.830] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    32.831] (**) Option "config_info" "udev:/sys/devices/virtual/input/input25/event24"
[    32.831] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 19)
[    32.831] (**) Option "xkb_rules" "evdev"
[    32.831] (**) Option "xkb_model" "pc105"
[    32.831] (**) Option "xkb_layout" "us"
[    32.831] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    32.832] (II) config/udev: Adding input device ENE eHome Infrared Remote Receiver (/dev/input/event15)
[    32.832] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "evdev keyboard catchall"
[    32.832] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "libinput keyboard catchall"
[    32.832] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "evdev keyboard catchall"
[    32.832] (II) Using input driver 'evdev' for 'ENE eHome Infrared Remote Receiver'
[    32.832] (**) ENE eHome Infrared Remote Receiver: always reports core events
[    32.832] (**) evdev: ENE eHome Infrared Remote Receiver: Device: "/dev/input/event15"
[    32.832] (--) evdev: ENE eHome Infrared Remote Receiver: Vendor 0 Product 0
[    32.832] (--) evdev: ENE eHome Infrared Remote Receiver: Found keys
[    32.832] (II) evdev: ENE eHome Infrared Remote Receiver: Configuring as keyboard
[    32.832] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input14/event15"
[    32.832] (II) XINPUT: Adding extended input device "ENE eHome Infrared Remote Receiver" (type: KEYBOARD, id 20)
[    32.832] (**) Option "xkb_rules" "evdev"
[    32.832] (**) Option "xkb_model" "pc105"
[    32.832] (**) Option "xkb_layout" "us"
[    32.832] (**) Option "xkb_options" "grp:alt_shift_toggle,terminate:ctrl_alt_bksp,grp_led:scroll"
[    41.308] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    41.308] (II) NVIDIA(GPU-0):     Vision stereo.
[    41.847] (II) NVIDIA(0): Setting mode "NULL"
[    42.957] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1366x768 +0+0 {ViewPortIn=1366x768, ViewPortOut=1366x768+0+0}"
[    52.085] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    52.085] (II) NVIDIA(GPU-0):     Vision stereo.
[   380.656] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[   380.656] (II) NVIDIA(GPU-0):     Vision stereo.

End-Date: 2019-10-12  09:09:26

[dolphin_oracle]

its the lack of a opengl renderer.

Code: Select all

Graphics:  Device-1: NVIDIA GT216M [GeForce GT 230M] vendor: Hewlett-Packard driver: nvidia 
           v: 340.107 bus ID: 01:00.0 chip ID: 10de:0a28 
           Display: x11 server: X.Org 1.20.4 driver: nvidia resolution: 1366x768~60Hz 
           OpenGL: renderer: N/A v: N/A direct render: N/A 
           

you may want to change vlc's default renderer from automatic to X11.