MX-19 Beta 3 Feedback

Forum rules
Locked
Message
Author
User avatar
dolphin_oracle
Developer
Posts: 22083
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-19 Beta 3 Feedback

#41 Post by dolphin_oracle »

chrispop99 wrote: Sat Oct 05, 2019 6:50 am I see the error in the photo below when enabling persistence on a live USB? It doesn't seem to cause a problem.


error.jpg



Is it significant?

Chris
I would say yes . Will forward to BJ.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
Jerry3904
Administrator
Posts: 23089
Joined: Wed Jul 19, 2006 6:13 am

Re: MX-19 Beta 3 Feedback

#42 Post by Jerry3904 »

The good news: I installed Opera, and look at the last lines:

Code: Select all

adding HTML5 propriatary media support
#-------------------------------------#
Checking security-archive signing key :  OK
Release signature check: OK
Package-list checksum verification: ok
Deb-package checksum verification: ok
Installed lib: /usr/lib/x86_64-linux-gnu/opera/lib_extra/libffmpeg.so
Installed FFmpeg version N-95241-g23ca8fd9e6
DONE
Thanks to fehlix, Stevo and anyone else in solving this!
Production: 5.10, MX-23 Xfce, AMD FX-4130 Quad-Core, GeForce GT 630/PCIe/SSE2, 16 GB, SSD 120 GB, Data 1TB
Personal: Lenovo X1 Carbon with MX-23 Fluxbox
Other: Raspberry Pi 5 with MX-23 Xfce Raspberry Pi Respin
Top
User avatar
Jerry3904
Administrator
Posts: 23089
Joined: Wed Jul 19, 2006 6:13 am

Re: MX-19 Beta 3 Feedback

#43 Post by Jerry3904 »

So my praoblem: I have tried 3 separate times to set /home on a different partition on what is still listed as my Personal machine in the Sig. But when I check after installation /home appears actually to be in /, not /media (right-click on Home > Properties). Here is a gparted image:
gparted.png
This machine does not detect the GRUB installation on the root directory, so I use grub2dos. And here is Quick System Info, showing home in the correct location.

Code: Select all

System:    Host: XPS13mx Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=/dev/sda6 quiet 
           Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-19beta-3_x64 patito feo September 22  2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Laptop System: Dell product: XPS 13 9343 v: N/A serial: <filter> Chassis: 
           type: 9 serial: <filter> 
           Mobo: Dell model: 0TRX4F v: A00 serial: <filter> UEFI: Dell v: A15 date: 01/23/2018 
Battery:   ID-1: BAT0 charge: 40.5 Wh condition: 51.1/52.7 Wh (97%) volts: 8.0/7.6 
           model: SMP DELL RWT1R43 type: Li-poly serial: <filter> status: Discharging 
           Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M325 serial: <filter> 
           charge: 55% (should be ignored) rechargeable: yes status: Discharging 
CPU:       Topology: Dual Core model: Intel Core i5-5200U bits: 64 type: MT MCP arch: Broadwell 
           family: 6 model-id: 3D (61) stepping: 4 microcode: 2D L2 cache: 3072 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 17557 
           Speed: 1148 MHz min/max: 500/2700 MHz Core speeds (MHz): 1: 1454 2: 1041 3: 1372 
           4: 1012 
           Vulnerabilities: Type: l1tf 
           mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
Graphics:  Device-1: Intel HD Graphics 5500 vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 
           chip ID: 8086:1616 
           Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2) v: 4.5 Mesa 18.3.6 
           compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel Broadwell-U Audio vendor: Dell driver: snd_hda_intel v: kernel 
           bus ID: 00:03.0 chip ID: 8086:160c 
           Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Dell 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:9ca0 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Broadcom Limited BCM4352 802.11ac Wireless Network Adapter vendor: Dell 
           driver: wl v: kernel port: f040 bus ID: 02:00.0 chip ID: 14e4:43b1 
           IF: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 489.05 GiB used: 14.42 GiB (2.9%) 
           ID-1: /dev/sda vendor: Crucial model: CT525MX300SSD4 size: 489.05 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: R060 scheme: GPT 
Partition: ID-1: / raw size: 97.66 GiB size: 95.62 GiB (97.92%) used: 5.43 GiB (5.7%) fs: ext4 
           dev: /dev/sda6 
           ID-2: /home raw size: 73.24 GiB size: 71.59 GiB (97.75%) used: 113.9 MiB (0.2%) 
           fs: ext4 dev: /dev/sda7 
Sensors:   System Temperatures: cpu: 47.0 C mobo: 39.0 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/buster buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ buster main non-free
           Active apt repos in: /etc/apt/sources.list.d/opera-stable.list 
           1: deb https://deb.opera.com/opera-stable/ stable non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 223 Uptime: 23m Memory: 3.76 GiB used: 936.8 MiB (24.3%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           running in: quick-system-in inxi: 3.0.36
Am I just crazy?!
You do not have the required permissions to view the files attached to this post.
Production: 5.10, MX-23 Xfce, AMD FX-4130 Quad-Core, GeForce GT 630/PCIe/SSE2, 16 GB, SSD 120 GB, Data 1TB
Personal: Lenovo X1 Carbon with MX-23 Fluxbox
Other: Raspberry Pi 5 with MX-23 Xfce Raspberry Pi Respin
Top
User avatar
Eadwine Rose
Administrator
Posts: 14471
Joined: Wed Jul 12, 2006 2:10 am

Re: MX-19 Beta 3 Feedback

#44 Post by Eadwine Rose »

Here is what happens when I start my tv using tvtime.

Sound is working fine system wide, SAVE for tvtime/tv card which uses the alsa plugin.


This is what you see in the config playback screen. That alsa entry is appearing and disappearing really fast, just like those lines in the terminal. Sound is sounding a bit like brrrrrrr
screen.jpg
Tried this adjusted to my system, person describes what is going on with this at the three dots listed:
https://thehumble.ninja/2014/02/06/fixi ... ur-system/

Leaves me with no config at all in pulseaudio still, so that is not a good thing. I wager I am doing something wrong. Not a clue what.

Code: Select all

System:    Host: eadwine Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 
           root=UUID=7a506997-56ec-4296-8e16-e4529ddf0ecb ro quiet splash 
           Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-19beta-3_x64 patito feo September 22  2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop Mobo: ASUSTeK model: TUF B450-PLUS GAMING v: Rev X.0x serial: <filter> 
           UEFI: American Megatrends v: 1607 date: 06/17/2019 
Battery:   Device-1: hidpp_battery_0 model: Logitech MX Ergo Multi-Device Trackball 
           serial: <filter> charge: 100% (should be ignored) rechargeable: yes 
           status: Discharging 
CPU:       Topology: 8-Core model: AMD Ryzen 7 2700 bits: 64 type: MT MCP arch: Zen+ 
           family: 17 (23) model-id: 8 stepping: 2 microcode: 800820C L2 cache: 4096 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
           bogomips: 102192 
           Speed: 2347 MHz min/max: 1550/3200 MHz boost: enabled Core speeds (MHz): 1: 2347 
           2: 1269 3: 1269 4: 1269 5: 1269 6: 2791 7: 2786 8: 2784 9: 1267 10: 1269 11: 1269 
           12: 2401 13: 2795 14: 2793 15: 2798 16: 1265 
           Vulnerabilities: Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 
           mitigation: Full AMD retpoline, IBPB: conditional, STIBP: disabled, RSB filling 
Graphics:  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: ASUSTeK driver: nouveau 
           v: kernel bus ID: 08:00.0 chip ID: 10de:1c82 
           Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1920x1080~60Hz, 1920x1080~60Hz 
           OpenGL: renderer: NV137 v: 4.3 Mesa 18.3.6 direct render: Yes 
Audio:     Device-1: Conexant Systems CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D 
           Comb 
           vendor: Hauppauge works driver: cx23885 v: 0.0.4 bus ID: 07:00.0 chip ID: 14f1:8880 
           Device-2: NVIDIA GP107GL High Definition Audio vendor: ASUSTeK driver: snd_hda_intel 
           v: kernel bus ID: 08:00.1 chip ID: 10de:0fb9 
           Device-3: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel 
           bus ID: 0a:00.3 chip ID: 1022:1457 
           Device-4: Logitech QuickCam E 3500 type: USB driver: snd-usb-audio,uvcvideo 
           bus ID: 3-1:2 chip ID: 046d:09a4 serial: <filter> 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK 
           driver: r8169 v: kernel port: f000 bus ID: 03:00.0 chip ID: 10ec:8168 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
           Device-2: Ralink MT7601U Wireless Adapter type: USB driver: mt7601u bus ID: 1-1:2 
           chip ID: 148f:7601 serial: <filter> 
           IF: wlan0 state: down mac: <filter> 
Drives:    Local Storage: total: 1.83 TiB used: 5.35 GiB (0.3%) 
           ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 2B6Q scheme: GPT 
           ID-2: /dev/sdb vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 2B6Q scheme: GPT 
           ID-3: /dev/sdc vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 3B6Q scheme: GPT 
           ID-4: /dev/sdd type: USB vendor: Seagate model: BUP Slim RD size: 931.51 GiB 
           block size: physical: 4096 B logical: 512 B serial: <filter> rev: 0109 scheme: MBR 
           ID-5: /dev/sde vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: 3B6Q scheme: GPT 
           ID-6: /dev/sdf type: USB model: USB DISK 2.0 size: 14.93 GiB block size: 
           physical: 512 B logical: 512 B serial: <filter> rev: PMAP scheme: MBR 
Partition: ID-1: / raw size: 58.59 GiB size: 57.42 GiB (98.00%) used: 5.21 GiB (9.1%) fs: ext4 
           dev: /dev/sdc1 
           ID-2: /home raw size: 166.48 GiB size: 162.87 GiB (97.83%) used: 125.1 MiB (0.1%) 
           fs: ext4 dev: /dev/sdc3 
           ID-3: swap-1 size: 7.81 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sdc2 
Sensors:   System Temperatures: cpu: 35.5 C mobo: N/A gpu: nouveau temp: 32 C 
           Fan Speeds (RPM): cpu: 0 gpu: nouveau fan: 1005 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/buster buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ buster main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 318 Uptime: 6m Memory: 31.41 GiB used: 1.01 GiB (3.2%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           running in: quick-system-in inxi: 3.0.36

If I need to start a separate thread, let me know.
You do not have the required permissions to view the files attached to this post.
MX-23.6_x64 July 31 2023 * 6.1.0-34amd64 ext4 Xfce 4.20.0 * 8-core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 535.216.01 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 870EVO * Samsung S24D330 & P2250 * HP Envy 5030
Top
danielson

Re: MX-19 Beta 3 Feedback

#45 Post by danielson »

@fehlix - thank you! ;)
Top
User avatar
jeffreyC
Posts: 522
Joined: Mon May 27, 2019 10:39 am

Re: MX-19 Beta 3 Feedback

#46 Post by jeffreyC »

jackdanielsesq wrote: Sat Oct 05, 2019 6:09 am Greetings once again

I might have asked this previously, but could not find it via search

How do I uninstall both FF69 & ESR so that I can install Waterfox

Regards

Jack
You can use Synaptic to uninstall them, but you do not need to in order to install Waterfox, there have been changes made in where Waterfox keeps its files and they no longer conflict with Firefox.
I have Firefox, Pale Moon and Waterfox all installed and working fine.
Top
Stuart_M
Posts: 691
Joined: Wed Aug 07, 2019 7:10 pm

Re: MX-19 Beta 3 Feedback

#47 Post by Stuart_M »

I've been playing with hoovering the mouse over the Panel icons in MX 19-beta-3. All the testing is with the Panel set to the horizontal bottom position. Everything else is kept to default settings (e.g. Panel Preferences > "Row size (pixels):" size 35). I'm using a 21.5" 1920 x 1080 monitor. The problem is the tool tips windows on some of the Panel icons (specifically Speaker, Unmount, Monitor Brightness and Ethernet) will display below the bottom of the Panel, meaning it's off screen and cannot be read.

I found three workarounds to get tool tips windows to display correctly from the smallest setting (16px) and up.

In Panel Preferences > Display tab:

1. I enabled "Don't reserve space on borders".

2. I deselected "Don't reserve space on borders" (this is the default) and in "Automatically hide the panel:" I selected "Intelligently" and then tested "Always". Both of these settings restored proper tool tip windows positioning just like #1 above.
Top
User avatar
dolphin_oracle
Developer
Posts: 22083
Joined: Sun Dec 16, 2007 12:17 pm

Re: MX-19 Beta 3 Feedback

#48 Post by dolphin_oracle »

Jerry3904 wrote: Sat Oct 05, 2019 7:26 am So my praoblem: I have tried 3 separate times to set /home on a different partition on what is still listed as my Personal machine in the Sig. But when I check after installation /home appears actually to be in /, not /media (right-click on Home > Properties). Here is a gparted image:gparted.pngThis machine does not detect the GRUB installation on the root directory, so I use grub2dos. And here is Quick System Info, showing home in the correct location.

Code: Select all

System:    Host: XPS13mx Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=/dev/sda6 quiet 
           Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-19beta-3_x64 patito feo September 22  2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Laptop System: Dell product: XPS 13 9343 v: N/A serial: <filter> Chassis: 
           type: 9 serial: <filter> 
           Mobo: Dell model: 0TRX4F v: A00 serial: <filter> UEFI: Dell v: A15 date: 01/23/2018 
Battery:   ID-1: BAT0 charge: 40.5 Wh condition: 51.1/52.7 Wh (97%) volts: 8.0/7.6 
           model: SMP DELL RWT1R43 type: Li-poly serial: <filter> status: Discharging 
           Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M325 serial: <filter> 
           charge: 55% (should be ignored) rechargeable: yes status: Discharging 
CPU:       Topology: Dual Core model: Intel Core i5-5200U bits: 64 type: MT MCP arch: Broadwell 
           family: 6 model-id: 3D (61) stepping: 4 microcode: 2D L2 cache: 3072 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 17557 
           Speed: 1148 MHz min/max: 500/2700 MHz Core speeds (MHz): 1: 1454 2: 1041 3: 1372 
           4: 1012 
           Vulnerabilities: Type: l1tf 
           mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
Graphics:  Device-1: Intel HD Graphics 5500 vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 
           chip ID: 8086:1616 
           Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2) v: 4.5 Mesa 18.3.6 
           compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel Broadwell-U Audio vendor: Dell driver: snd_hda_intel v: kernel 
           bus ID: 00:03.0 chip ID: 8086:160c 
           Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Dell 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:9ca0 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Broadcom Limited BCM4352 802.11ac Wireless Network Adapter vendor: Dell 
           driver: wl v: kernel port: f040 bus ID: 02:00.0 chip ID: 14e4:43b1 
           IF: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 489.05 GiB used: 14.42 GiB (2.9%) 
           ID-1: /dev/sda vendor: Crucial model: CT525MX300SSD4 size: 489.05 GiB block size: 
           physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: R060 scheme: GPT 
Partition: ID-1: / raw size: 97.66 GiB size: 95.62 GiB (97.92%) used: 5.43 GiB (5.7%) fs: ext4 
           dev: /dev/sda6 
           ID-2: /home raw size: 73.24 GiB size: 71.59 GiB (97.75%) used: 113.9 MiB (0.2%) 
           fs: ext4 dev: /dev/sda7 
Sensors:   System Temperatures: cpu: 47.0 C mobo: 39.0 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/buster buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ buster main non-free
           Active apt repos in: /etc/apt/sources.list.d/opera-stable.list 
           1: deb https://deb.opera.com/opera-stable/ stable non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 223 Uptime: 23m Memory: 3.76 GiB used: 936.8 MiB (24.3%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           running in: quick-system-in inxi: 3.0.36
Am I just crazy?!
/var/log/minstall.log?

and

/etc/fstab

should tell the story.

I'm not sure what you are asking? A separate home partition will be mounted at /home, not /media/home, if its working correctly.
Last edited by dolphin_oracle on Sat Oct 05, 2019 9:04 am, edited 1 time in total.
http://www.youtube.com/runwiththedolphin
lenovo ThinkPad X1 Extreme Gen 4 - MX-23
FYI: mx "test" repo is not the same thing as debian testing repo.
Top
User avatar
richb
Administrator
Posts: 10856
Joined: Wed Jul 12, 2006 2:17 pm

Re: MX-19 Beta 3 Feedback

#49 Post by richb »

@Stuart_M
Clarification for users adding non-default applications.That does work for the default, (pre-installed) apps. Some Others added like copyQ, Slack will not show tool tips. They most likely do not have tool tips at all.
I did not have to hide the panel to see tool tips on the standard apps.
Forum Rules
Guide - How to Ask for Help

richb Administrator
System: MX 23 KDE
AMD A8 7600 FM2+ CPU R7 Graphics, 16 GIG Mem. Three Samsung EVO SSD's 250 GB
Top
User avatar
Jerry3904
Administrator
Posts: 23089
Joined: Wed Jul 19, 2006 6:13 am

Re: MX-19 Beta 3 Feedback

#50 Post by Jerry3904 »

@DO: OK, fstab agrees with the others.

Code: Select all

# Pluggable devices are handled by uDev, they are not in fstab
UUID=b5faf9cc-3e6e-4ea7-8471-609902fe8255 / ext4 defaults,noatime 1 1
UUID=7be43ce8-acd2-4397-9715-a64eed61245d /home ext4 defaults,noatime 1 2
Just didn't understand why Thunar locates in in /
Production: 5.10, MX-23 Xfce, AMD FX-4130 Quad-Core, GeForce GT 630/PCIe/SSE2, 16 GB, SSD 120 GB, Data 1TB
Personal: Lenovo X1 Carbon with MX-23 Fluxbox
Other: Raspberry Pi 5 with MX-23 Xfce Raspberry Pi Respin
Top
Locked

Return to “General”