MX-19 Beta 2.1 Feedback

[mjtux]

Thanks for the explanation, asqwerth.

Some of the themes mentioned are gtk2 themes (dust sand Mac) or gtk3 themes made for older versions of gtk3 and no longer maintained (adwaita xfce dark). Gtk2-only themes won't theme gtk3 apps, including the whole xfce 4.14. Outdated gtk3 themes may show up weird or wrong when used on newer versions of gtk3 .

So perhaps you may wish to have a separate thread discussing what themes are nice AND work well with debian buster's gtk version 3.24.

I have used all of these, even if only briefly, so they do work to some extent with MX 18.3, but don't know which GTK version that is.

To ensure MX-19 / Debian "Buster" compatiblity, should we look for themes that are explicitly stated as compatible with GTK3 ver. 3.34, or 3.3+, etc?

Just as an aside, this was interesting:
https://blogs.gnome.org/mclasen/2015/11 ... tk-update/

Oh NO! they’re breaking themes again!

I'm trying to get a handle on some of the basic concepts.
Just spent over an hour trying to track down definitive information sources for:
A simple HTML table would work very well as a concise central information source for these essential facts, but I could not find any.

• Debian releases, code names, GTK version and kernel version
• MX releases and their relative base versions of Debian, GTK, etc.

The result was a confusing process of jumping from one referenced source to another and another ....

• GTK+ is now just GTK?
• A Debian "Stretch" release reference to GNOME desktop version going from 3.14 to 3.22 looks very similar to the GTK version 3.24.
  https://en.wikipedia.org/wiki/Debian_ve ... _(Stretch)
  Do they refer to the same or completely different things?
• Debian Buster info says nothing about the GTK (or kernel) version.
  https://en.wikipedia.org/wiki/Debian_ve ... 0_(Buster)
  Finally ended up here, but don't know where to look ...
  https://www.debian.org/releases/buster/ ... ex.en.html
• MX releases:
  https://en.wikipedia.org/wiki/MX_Linux#Releases
  https://mxlinux.org/previous-releases/

Adding to the confusion about compatible themes is the fact that with some of the themes, it is not obvious which GTK version they are based on.
That is something that could be discussed in a separate thread, as you suggested.
Example: One the those themes, Adwaita Dark Green, states

Originally built for GTK 3.16 and actively maintained for GTK 3.20+.

--------------
Regarding the "likes" for the Nordic theme, I don't use it because the highlighting colors do not provide enough contrast.
The highlight contrast is also inconsistent between the base Nordic and the Nordic-bluish-accent variant.
IF that was fixed, it would be more useable, IMHO.

Check out Qogir theme, it's the best looking theme imho.

For anyone interested, here is the link:
https://www.pling.com/s/Gnome/p/1230631/

=========
https://mxlinux.org/current-release-features/
This is a great page, but it does not state the current version number.

Although the code name changes wih every release, the base version number remains the same through all point releases.
I think it would be very helpful if the page Heading stated the base version number, like:

Current Release 18.x Features
18.x refers to version 18.0 and all version 18.x point releases

My apologies if I have swayed this thread away from it's intended use.

[Gerson]

I installed in beta 2.1 the latest version of kernel 5 from the MX repositories and greatly improved the performance of my machine, even Redshift now works well, I removed f.lux because it has no handling by graphics, only by terminal. I wanted to comment this curiosity that caught my attention.

[jeffreyC]

GTK 3.xx is GNOME Tool Kit.
Previous releases were GIMP Tool Kit 1 and 2.

Breaking themes with each new release is done on purpose, the intent is to prevent theming GNOME so as to protect the 'brand', making GNOME easily recognized by it always being the same. This is also why the name of the GNOME icon set is a Sanskrit word which means the only one. Expect new GTK releases to break all themes built against earlier GTK versions.

The leading GNOME developers are Red Hat employees, and it is their product.
This is readily proven from their own team emails and blogs.

[SwampRabbit]

I installed in beta 2.1 the latest version of kernel 5 from the MX repositories and greatly improved the performance of my machine, even Redshift now works well, I removed f.lux because it has no handling by graphics, only by terminal. I wanted to comment this curiosity that caught my attention.

Gerson, thank you for reporting this... it is very good to know. If you run into issues using that kernel... please let us know.

[JayM]

I installed 19b2 into a 50GiB partition that I'd left free when I installed 18.3 Thursday. No problems with a basic installation (no encryption, /home inside root, nothing fancy.) I opted not to (re)install grub as I already had one installed by 18.

I installed the nvidia driver: no problems.

Remember the issue of peoples' mouse cursor size being reset to the default small one after they log out or restart? The solution in 18 was to add a couple of lines to a .gtkrc-2.0 file in your home directory. I confirmed that in MX-19 this file is ignored, even if you name it .gtkrc-3.0. I also confirmed that 19 doesn't appear to have the issue of users' mouse cursor size settings being lost after sessions end. My chosen cursor size in Settings/Mouse and Touchpad/Theme tab has survived several logouts/logins.

Also, I can open LibreOffice now.

I guess what I'm basically reporting is that 19b2 seems to be almost as boring of a distro as 18.3: no problems to solve (though I haven't been using 19 extensively, just a few times now and then.)

Code: Select all

System:    Host: mx19b2 Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-19beta-2.1_x64 patito feo September 8  2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Laptop System: Hewlett-Packard product: HP Pavilion dv6 Notebook PC 
           v: 049D210000241210000020000 serial: <filter> Chassis: type: 10 serial: <filter> 
           Mobo: Hewlett-Packard model: 3659 v: 32.25 serial: <filter> BIOS: Hewlett-Packard 
           v: F.1B date: 04/23/2010 
Battery:   ID-1: BAT0 charge: 43.5 Wh condition: 43.5/47.5 Wh (92%) volts: 12.5/10.8 
           model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Full 
CPU:       Topology: Dual Core model: Intel Core i5 M 430 bits: 64 type: MT MCP arch: Nehalem 
           family: 6 model-id: 25 (37) stepping: 2 microcode: 11 L2 cache: 3072 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 18091 
           Speed: 1367 MHz min/max: 1199/2267 MHz boost: enabled Core speeds (MHz): 1: 1477 
           2: 1467 3: 1581 4: 1525 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: mds 
           status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: conditional, RSB filling 
Graphics:  Device-1: NVIDIA GT216M [GeForce GT 230M] vendor: Hewlett-Packard driver: nvidia 
           v: 340.107 bus ID: 01:00.0 chip ID: 10de:0a28 
           Display: x11 server: X.Org 1.20.4 driver: nvidia resolution: 1366x768~60Hz 
           OpenGL: renderer: GeForce GT 230M/PCIe/SSE2 v: 3.3.0 NVIDIA 340.107 
           direct render: Yes 
Audio:     Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Hewlett-Packard 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:3b56 
           Device-2: NVIDIA GT216 HDMI Audio vendor: Hewlett-Packard driver: snd_hda_intel 
           v: kernel bus ID: 01:00.1 chip ID: 10de:0be2 
           Device-3: Philips s SAA7160 vendor: Avermedia driver: N/A bus ID: 04:00.0 
           chip ID: 1131:7160 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Broadcom Limited BCM43225 802.11b/g/n vendor: Hewlett-Packard driver: wl 
           v: kernel port: 7000 bus ID: 02:00.0 chip ID: 14e4:4357 
           IF: wlan0 state: dormant mac: <filter> 
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: Hewlett-Packard driver: r8169 v: kernel port: 5000 bus ID: 03:00.0 
           chip ID: 10ec:8168 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 465.76 GiB used: 40.94 GiB (8.8%) 
           ID-1: /dev/sda vendor: Seagate model: ST9500325AS size: 465.76 GiB block size: 
           physical: 512 B logical: 512 B speed: 3.0 Gb/s rotation: 5400 rpm serial: <filter> 
           rev: SDM1 scheme: MBR 
Partition: ID-1: / raw size: 50.03 GiB size: 48.99 GiB (97.93%) used: 5.65 GiB (11.5%) fs: ext4 
           dev: /dev/sda4 
Sensors:   System Temperatures: cpu: 54.0 C mobo: N/A gpu: nvidia temp: 71 C 
           Fan Speeds (RPM): N/A 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/buster buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ buster main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 217 Uptime: 39m Memory: 3.78 GiB used: 837.1 MiB (21.6%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           running in: quick-system-in inxi: 3.0.33 

One question: I just noticed that my QSI says "Vulnerabilities: Type: l1tf mitigation: PTE Inversion". I thought the MX kernel was patched for all known Intel vulns?

[Don_in_Vermont]

Audio comes up muted after every reboot.

Code: Select all

System:    Host: ThinkCentre-M92p-2 Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc 
           v: 8.3.0 Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 
           dm: LightDM 1.26.0 Distro: MX-19beta-2.1_x64 patito feo September 8  2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop System: LENOVO product: 3212CF7 v: ThinkCentre M92p serial: <filter> 
           Chassis: type: 3 serial: <filter> 
           Mobo: LENOVO model: MAHOBAY v: NOK serial: <filter> BIOS: LENOVO v: 9SKT9BAUS 
           date: 07/17/2018 
CPU:       Topology: Quad Core model: Intel Core i5-3550 bits: 64 type: MCP arch: Ivy Bridge 
           family: 6 model-id: 3A (58) stepping: 9 microcode: 21 L2 cache: 6144 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 26339 
           Speed: 1596 MHz min/max: 1600/3700 MHz Core speeds (MHz): 1: 1596 2: 1596 3: 1596 
           4: 1596 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: disabled, RSB filling 
Graphics:  Device-1: AMD Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] 
           vendor: Bitland Information driver: radeon v: kernel bus ID: 01:00.0 
           chip ID: 1002:6779 
           Display: x11 server: X.Org 1.20.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: AMD CAICOS (DRM 2.50.0 / 4.19.0-6-amd64 LLVM 7.0.1) 
           v: 3.3 Mesa 18.3.6 compat-v: 3.1 direct render: Yes 
Audio:     Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:1e20 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Intel 82579LM Gigabit Network vendor: Lenovo driver: e1000e v: 3.2.6-k 
           port: f040 bus ID: 00:19.0 chip ID: 8086:1502 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 931.51 GiB used: 15.00 GiB (1.6%) 
           ID-1: /dev/sda vendor: Seagate model: ST1000DM003-1CH162 size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> 
           rev: CC57 scheme: MBR 
Partition: ID-1: / raw size: 32.23 GiB size: 31.47 GiB (97.65%) used: 5.94 GiB (18.9%) fs: ext4 
           dev: /dev/sda1 
           ID-2: /home raw size: 867.06 GiB size: 852.45 GiB (98.32%) used: 9.06 GiB (1.1%) 
           fs: ext4 dev: /dev/sda2 
           ID-3: swap-1 size: 32.23 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: radeon temp: 39 C 
           Fan Speeds (RPM): N/A 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/buster buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ buster main non-free
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http://linux.teamviewer.com/deb stable main
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 199 Uptime: 8m Memory: 7.72 GiB used: 924.7 MiB (11.7%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           running in: quick-system-in inxi: 3.0.33 

[kmathern]

Question about $PATH, and is there something wrong with it in MX-19 beta 2.1?

$PATH is initially set up like this

Code: Select all

$ echo $PATH
/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/sbin:/usr/sbin

I have galileo installed in /usr/local/bin (not our repo package, but the one downloaded from here: https://bitbucket.org/benallard/galileo/downloads/)

Code: Select all

$ whereis galileo
galileo: /usr/local/bin/galileo

But when I tried to run it, it looked for it in /usr/bin and it wasn't found

Code: Select all

$ galileo version
bash: /usr/bin/galileo: No such file or directory

So I did a export /usr/local/bin to PATH

Code: Select all

$ export PATH=$PATH:/usr/local/bin
kent@mx:~
$ echo $PATH
/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games:/sbin:/usr/sbin:/usr/local/bin
kent@mx:~

And it now works

Code: Select all

$ galileo version
/usr/local/bin/galileo: 1.0dev

/usr/local/bin was already in $PATH, I don't think I should have had to export it again, should I?

[peregrine]

Installed on an old HP laptop

Code: Select all

$ inxi -F
System:    Host: hpmx19b2.1 Kernel: 4.19.0-6-amd64 x86_64 bits: 64 Desktop: Xfce 4.14.1 
           Distro: MX-19beta-2.1_x64 patito feo September 8  2019 
Machine:   Type: Laptop System: Hewlett-Packard product: HP G62 Notebook PC 
           v: 0593110002242710010020100 serial: <root required> 
           Mobo: Hewlett-Packard model: 1444 v: 69.37 serial: <root required> 
           BIOS: Hewlett-Packard v: F.29 date: 04/07/2011 
CPU:       Topology: Dual Core model: AMD Turion II P540 bits: 64 type: MCP L2 cache: 2048 KiB 
           Speed: 1500 MHz min/max: 800/2400 MHz Core speeds (MHz): 1: 1500 2: 800 
Graphics:  Device-1: AMD RS880M [Mobility Radeon HD 4225/4250] driver: radeon v: kernel 
           Display: x11 server: X.Org 1.20.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1366x768~60Hz 
           OpenGL: renderer: AMD RS880 (DRM 2.50.0 / 4.19.0-6-amd64 LLVM 7.0.1) 
           v: 3.3 Mesa 18.3.6 
Audio:     Device-1: AMD SBx00 Azalia driver: snd_hda_intel 
           Device-2: AMD RS880 HDMI Audio [Radeon HD 4200 Series] driver: snd_hda_intel 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Qualcomm Atheros AR9285 Wireless Network Adapter driver: ath9k 
           IF: wlan0 state: up mac: 4c:0f:6e:67:63:c6 
           Device-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet driver: r8169 
           IF: eth0 state: down mac: 3c:4a:92:53:27:3f 
Drives:    Local Storage: total: 465.76 GiB used: 5.38 GiB (1.2%) 
           ID-1: /dev/sda vendor: Western Digital model: WD5000BEVT-60A0RT0 size: 465.76 GiB 
Partition: ID-1: / size: 17.59 GiB used: 5.21 GiB (29.7%) fs: ext4 dev: /dev/sda5 
           ID-2: /home size: 21.40 GiB used: 164.1 MiB (0.7%) fs: ext4 dev: /dev/sda6 
           ID-3: swap-1 size: 9.81 GiB used: 1.3 MiB (0.0%) fs: swap dev: /dev/sda7 
Sensors:   System Temperatures: cpu: 86.9 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Info:      Processes: 174 Uptime: 19m Memory: 1.70 GiB used: 958.4 MiB (55.2%) Shell: bash 
           inxi: 3.0.33 

Tried to install server using package manager. Install failed. I see the package manager is trying to install php7.0 while 7.3 is the version available in Beta 2.1

ScreenshotServer.jpg

[dolphin_oracle]

Audio comes up muted after every reboot.

Code: Select all

System:    Host: ThinkCentre-M92p-2 Kernel: 4.19.0-6-amd64 x86_64 bits: 64 compiler: gcc 
           v: 8.3.0 Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 
           dm: LightDM 1.26.0 Distro: MX-19beta-2.1_x64 patito feo September 8  2019 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop System: LENOVO product: 3212CF7 v: ThinkCentre M92p serial: <filter> 
           Chassis: type: 3 serial: <filter> 
           Mobo: LENOVO model: MAHOBAY v: NOK serial: <filter> BIOS: LENOVO v: 9SKT9BAUS 
           date: 07/17/2018 
CPU:       Topology: Quad Core model: Intel Core i5-3550 bits: 64 type: MCP arch: Ivy Bridge 
           family: 6 model-id: 3A (58) stepping: 9 microcode: 21 L2 cache: 6144 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 26339 
           Speed: 1596 MHz min/max: 1600/3700 MHz Core speeds (MHz): 1: 1596 2: 1596 3: 1596 
           4: 1596 
           Vulnerabilities: Type: l1tf mitigation: PTE Inversion 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, 
           STIBP: disabled, RSB filling 
Graphics:  Device-1: AMD Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] 
           vendor: Bitland Information driver: radeon v: kernel bus ID: 01:00.0 
           chip ID: 1002:6779 
           Display: x11 server: X.Org 1.20.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: AMD CAICOS (DRM 2.50.0 / 4.19.0-6-amd64 LLVM 7.0.1) 
           v: 3.3 Mesa 18.3.6 compat-v: 3.1 direct render: Yes 
Audio:     Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:1e20 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Intel 82579LM Gigabit Network vendor: Lenovo driver: e1000e v: 3.2.6-k 
           port: f040 bus ID: 00:19.0 chip ID: 8086:1502 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 931.51 GiB used: 15.00 GiB (1.6%) 
           ID-1: /dev/sda vendor: Seagate model: ST1000DM003-1CH162 size: 931.51 GiB block size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> 
           rev: CC57 scheme: MBR 
Partition: ID-1: / raw size: 32.23 GiB size: 31.47 GiB (97.65%) used: 5.94 GiB (18.9%) fs: ext4 
           dev: /dev/sda1 
           ID-2: /home raw size: 867.06 GiB size: 852.45 GiB (98.32%) used: 9.06 GiB (1.1%) 
           fs: ext4 dev: /dev/sda2 
           ID-3: swap-1 size: 32.23 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: radeon temp: 39 C 
           Fan Speeds (RPM): N/A 
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://iso.mxrepo.com/antix/buster buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ buster main non-free
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http://linux.teamviewer.com/deb stable main
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 199 Uptime: 8m Memory: 7.72 GiB used: 924.7 MiB (11.7%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           running in: quick-system-in inxi: 3.0.33 

this should be fixed next iso. its a race condition between pulseaudio and the volumeicon.

[dolphin_oracle]

Installed on an old HP laptop

Code: Select all

$ inxi -F
System:    Host: hpmx19b2.1 Kernel: 4.19.0-6-amd64 x86_64 bits: 64 Desktop: Xfce 4.14.1 
           Distro: MX-19beta-2.1_x64 patito feo September 8  2019 
Machine:   Type: Laptop System: Hewlett-Packard product: HP G62 Notebook PC 
           v: 0593110002242710010020100 serial: <root required> 
           Mobo: Hewlett-Packard model: 1444 v: 69.37 serial: <root required> 
           BIOS: Hewlett-Packard v: F.29 date: 04/07/2011 
CPU:       Topology: Dual Core model: AMD Turion II P540 bits: 64 type: MCP L2 cache: 2048 KiB 
           Speed: 1500 MHz min/max: 800/2400 MHz Core speeds (MHz): 1: 1500 2: 800 
Graphics:  Device-1: AMD RS880M [Mobility Radeon HD 4225/4250] driver: radeon v: kernel 
           Display: x11 server: X.Org 1.20.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa 
           resolution: 1366x768~60Hz 
           OpenGL: renderer: AMD RS880 (DRM 2.50.0 / 4.19.0-6-amd64 LLVM 7.0.1) 
           v: 3.3 Mesa 18.3.6 
Audio:     Device-1: AMD SBx00 Azalia driver: snd_hda_intel 
           Device-2: AMD RS880 HDMI Audio [Radeon HD 4200 Series] driver: snd_hda_intel 
           Sound Server: ALSA v: k4.19.0-6-amd64 
Network:   Device-1: Qualcomm Atheros AR9285 Wireless Network Adapter driver: ath9k 
           IF: wlan0 state: up mac: 4c:0f:6e:67:63:c6 
           Device-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet driver: r8169 
           IF: eth0 state: down mac: 3c:4a:92:53:27:3f 
Drives:    Local Storage: total: 465.76 GiB used: 5.38 GiB (1.2%) 
           ID-1: /dev/sda vendor: Western Digital model: WD5000BEVT-60A0RT0 size: 465.76 GiB 
Partition: ID-1: / size: 17.59 GiB used: 5.21 GiB (29.7%) fs: ext4 dev: /dev/sda5 
           ID-2: /home size: 21.40 GiB used: 164.1 MiB (0.7%) fs: ext4 dev: /dev/sda6 
           ID-3: swap-1 size: 9.81 GiB used: 1.3 MiB (0.0%) fs: swap dev: /dev/sda7 
Sensors:   System Temperatures: cpu: 86.9 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Info:      Processes: 174 Uptime: 19m Memory: 1.70 GiB used: 958.4 MiB (55.2%) Shell: bash 
           inxi: 3.0.33 

Tried to install server using package manager. Install failed. I see the package manager is trying to install php7.0 while 7.3 is the version available in Beta 2.1
ScreenshotServer.jpg

will fix thanks.