dolphin_oracle wrote: Tue Dec 11, 2018 12:35 pmdarth.severus wrote: Tue Dec 11, 2018 12:33 pm Hi, I need to decide what to install. Has it any disadvantages to install MX-17.1 instead waiting for MX-18. Since there is no new Debian.
Also, can someone who tested MX-18 beta as a new install please point out how the system encryption per installer is working now. Will boot be encrypted?
I had no problem installing with encryption MX 18 b1 64 bit. (less the /boot partition as do indicated.)
MX-18 beta 1 feedback
Re: MX-18 beta 1 feedback
Forum Rules
Guide - How to Ask for Help
richb Administrator
System: MX 23 KDE
AMD A8 7600 FM2+ CPU R7 Graphics, 16 GIG Mem. Three Samsung EVO SSD's 250 GB
Guide - How to Ask for Help
richb Administrator
System: MX 23 KDE
AMD A8 7600 FM2+ CPU R7 Graphics, 16 GIG Mem. Three Samsung EVO SSD's 250 GB
Re: MX-18 beta 1 feedback
Thinkpad 600x (1999-2001)
Display Color and Audio Sound issues persist (started with antix-17 and mx-17, works properly with MX-14.4 and 16.1):
Color Problem:
- colors display as inverted/opposite -- e.g., yellow=purple, blue=green. Note: this problem doesn't happen in AntiX-core cli console interface, issue occurs only with xorg running.
$ inxi -Gxxx
Color Solution:
- sudo nano on /etc/X11/xorg.conf
- changed color depth to 16-bit by adding last line: "DefaultDepth 16"
Is there a way to have the color depth detected on install and change this automatically or semi-manually with an Fn button option in the Live boot or installer? Or some MX tool for low color resolution? Or something to get color displaying properly on ancient computers like this? Was whatever that did this before (with MX-14.4 and -16.1) removed?
Sound Problem:
- MX Select Sound: "No sound cards/devices were found"
Before Fix
$ inxi -Axxx
Sound Solution (manual):
- download latest old firmware: ftp://ftp.alsa-project.org/pub/firmware ... 29.tar.bz2 (2015-02-20)
- right click in Thunar extract here
- copy cs46xx folder
- open Root Thunar
- paste to /lib/firmware/
- open terminal "sudo modprobe -r snd-cs46xx" then "sudo modprobe snd-cs46xx"
Could this cs46xx firmware be included in the 32-bit .iso (or an MX tool created that could extract and paste the needed driver)? There are also numerous other old sound cards here in the file that might help other people with really old laptops.
After Fix:
$ inxi -Axxx
Full inxi
sudo inxi -v8 -z
Display Color and Audio Sound issues persist (started with antix-17 and mx-17, works properly with MX-14.4 and 16.1):
Color Problem:
- colors display as inverted/opposite -- e.g., yellow=purple, blue=green. Note: this problem doesn't happen in AntiX-core cli console interface, issue occurs only with xorg running.
$ inxi -Gxxx
Code: Select all
Graphics:
Device-1: Neomagic NM2360 [MagicMedia 256ZX] vendor: IBM ThinkPad 600X
driver: N/A bus ID: 01:00.0 chip ID: 10c8:0006
Display: x11 server: X.Org 1.19.2 driver: vesa resolution: 1024x768~61Hz
OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.6 compat-v: 3.1
direct render: Yes - sudo nano on /etc/X11/xorg.conf
- changed color depth to 16-bit by adding last line: "DefaultDepth 16"
Is there a way to have the color depth detected on install and change this automatically or semi-manually with an Fn button option in the Live boot or installer? Or some MX tool for low color resolution? Or something to get color displaying properly on ancient computers like this? Was whatever that did this before (with MX-14.4 and -16.1) removed?
Sound Problem:
- MX Select Sound: "No sound cards/devices were found"
Before Fix
$ inxi -Axxx
Code: Select all
Audio:
Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio
Accelerator]
vendor: IBM ThinkPad 600X/A20m driver: N/A bus ID: 00:06.0 chip ID: 1013:6003
Sound Server: ALSA v: k4.19.0-1-686-pae - download latest old firmware: ftp://ftp.alsa-project.org/pub/firmware ... 29.tar.bz2 (2015-02-20)
- right click in Thunar extract here
- copy cs46xx folder
- open Root Thunar
- paste to /lib/firmware/
- open terminal "sudo modprobe -r snd-cs46xx" then "sudo modprobe snd-cs46xx"
Could this cs46xx firmware be included in the 32-bit .iso (or an MX tool created that could extract and paste the needed driver)? There are also numerous other old sound cards here in the file that might help other people with really old laptops.
After Fix:
$ inxi -Axxx
Code: Select all
Audio:
Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio
Accelerator]
vendor: IBM ThinkPad 600X/A20m driver: snd_cs46xx v: kernel bus ID: 00:06.0
chip ID: 1013:6003
Sound Server: ALSA v: k4.19.0-1-686-pae Full inxi
sudo inxi -v8 -z
Code: Select all
System: Host: mx1 Kernel: 4.19.0-1-686-pae i686 bits: 32 compiler: gcc v: 6.3.0 Desktop: Xfce 4.12.3
tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3
Distro: MX-18b1_386 Continuum December 3 2018 base: Debian GNU/Linux 9 (stretch)
Machine: Type: Laptop System: IBM product: 26468EU v: N/A serial: <filter> Chassis: type: 10
serial: N/A
Mobo: IBM model: 26468EU serial: <filter> BIOS: IBM v: ITET55WW date: 11/30/1999
Battery: ID-1: BAT0 charge: 43.3 Wh condition: 45.4/45.4 Wh (100%) volts: 11.8/10.8
model: IBM Corporation ThinkPad Battery type: Li-ion serial: N/A status: Unknown
Memory: RAM: total: 494.6 MiB used: 234.3 MiB (47.4%)
Array-1: capacity: 768 MiB note: est. slots: 3 EC: None max module size: 256 MiB
Device-1: DIMM 0 size: 64 MiB info: single-bank speed: type: Other detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A
Device-2: DIMM 1 size: 256 MiB info: double-bank speed: type: Other detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A
Device-3: DIMM 2 size: 256 MiB info: double-bank speed: type: Other detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A
PCI Slots: Slot: Adapter 0, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available
length: Other
Slot: Adapter 0, Socket 1 type: 32-bit PC Card (PCMCIA) CardBus Slot 2 status: Available
length: Other
CPU: Topology: Single Core model: Pentium III (Coppermine) bits: 32 type: MCP
arch: P6 III Coppermine family: 6 model-id: 8 stepping: 6 microcode: 9 L1 cache: 32 KiB
L2 cache: 256 KiB bogomips: 1694
Speed: 850 MHz min/max: 700/850 MHz Core speed (MHz): 1: 850
Flags: cmov cpuid cx8 de fpu fxsr mca mce mmx msr mtrr pae pge pse pse36 pti sep sse tsc vme
Vulnerabilities: Type: l1tf mitigation: PTE Inversion
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline
Graphics: Device-1: Neomagic NM2360 [MagicMedia 256ZX] vendor: IBM ThinkPad 600X driver: N/A
bus ID: 01:00.0 chip ID: 10c8:0006
Display: server: X.Org 1.19.2 driver: vesa resolution: 1024x768~61Hz
OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.6 compat-v: 3.1
direct render: Yes
Audio: Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator]
vendor: IBM ThinkPad 600X/A20m driver: N/A bus ID: 00:06.0 chip ID: 1013:6003
Sound Server: ALSA v: k4.19.0-1-686-pae
Network: Device-1: Intel 82371AB/EB/MB PIIX4 ISA type: network bridge driver: N/A port: 4400
bus ID: 00:07.0 chip ID: 8086:7110
Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: N/A port: 4000
bus ID: 00:07.3 chip ID: 8086:7113
Device-3: Ralink RT2800 802.11n PCI driver: rt2800pci v: 2.3.0 port: 4000 bus ID: 06:00.0
chip ID: 1814:0601
IF: wlan0 state: down mac: <filter>
WAN IP: No WAN IP data found. Connected to the web? SSL issues?
Drives: Local Storage: total: 119.24 GiB used: 35.7 MiB (0.0%)
ID-1: /dev/sda vendor: Crucial model: CT128M550SSD3 size: 119.24 GiB block size:
physical: 4096 B logical: 512 B speed: <unknown> serial: <filter> rev: MU01 temp: 43 C
scheme: MBR
Floppy-1: /dev/fd0
Optical-1: /dev/sr0 vendor: TOSHIBA model: DVD-ROM SD-C2612 rev: 1011 dev-links: cdrom,dvd
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none state: running
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: N/A size: 374.0 MiB used: 19.7 MiB (5.3%) fs: overlay dev: ERR-102
label: N/A uuid: N/A
ID-2: /live/boot-dev raw size: 1.29 GiB size: 1.29 GiB (99.94%) used: 1.29 GiB (100.0%)
fs: iso9660 block size: 2048 B dev: /dev/sr0 label: antiXlive uuid: 2018-12-03-02-22-49-00
ID-3: swap-1 size: 2.05 GiB used: 16.0 MiB (0.8%) fs: swap swappiness: 60 (default)
cache pressure: 100 (default) dev: /dev/sda2 label: N/A
uuid: e1d91df4-8549-41c8-9868-b42919b504c1
Unmounted: ID-1: /dev/sda1 size: 117.20 GiB fs: ext4 label: N/A
uuid: 5c84ae89-d35e-46b9-bb10-905c61f3f9b9
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Sensors: Message: No sensors data was found. Is sensors configured?
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/stretch stretch main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.us.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.us.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ stretch main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes: CPU top: 5
1: cpu: 15.5% command: sudo pid: 4482 mem: 4.97 MiB (1.0%)
2: cpu: 6.9% command: xfce4-terminal pid: 4417 mem: 30.8 MiB (6.2%)
3: cpu: 6.1% command: libwhiskermenu.so started by: wrapper-1.0 pid: 4108 mem: 26.4 MiB (5.3%)
4: cpu: 5.2% command: xfwm4 pid: 3972 mem: 18.0 MiB (3.6%)
5: cpu: 5.1% command: xfsettingsd pid: 4052 mem: 15.8 MiB (3.2%)
Memory top: 5
1: mem: 61.2 MiB (12.3%) command: apt-notifier.py started by: python pid: 4082 cpu: 3.9%
2: mem: 31.0 MiB (6.2%) command: xorg pid: 3536 cpu: 4.2%
3: mem: 30.8 MiB (6.2%) command: xfce4-terminal pid: 4417 cpu: 6.9%
4: mem: 29.7 MiB (5.9%) command: nm-applet pid: 4024 cpu: 3.5%
5: mem: 27.9 MiB (5.6%) command: yad pid: 4029 cpu: 3.2%
Info: Processes: 152 Uptime: 10m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0
alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
Re: MX-18 beta 1 feedback
Thinkpad A31p (2002-2003):
Works fine!
sudo inxi -v8 -z
Works fine!
sudo inxi -v8 -z
Code: Select all
System: Host: Thinkpad-A31p-Linux-MX18b1 Kernel: 4.19.0-1-686-pae i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: Xfce 4.12.3 tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3
Distro: MX-18b1_386 Continuum December 3 2018 base: Debian GNU/Linux 9 (stretch)
Machine: Type: Laptop System: IBM product: 2653R4U v: N/A serial: <filter> Chassis: type: 10 serial: N/A
Mobo: IBM model: 2653R4U serial: <filter> BIOS: IBM v: 1NET16WW (1.10 ) date: 10/19/2006
Battery: ID-1: BAT0 charge: 45.7 Wh condition: 45.7/47.5 Wh (96%) volts: 12.4/10.8
model: SANYO IBM-COMPATIBLE type: Li-ion serial: <filter> status: Full
ID-2: BAT1 charge: 17.9 Wh condition: 18.7/38.9 Wh (48%) volts: 12.4/10.8
model: SANYO IBM-02K6817 type: Li-ion serial: <filter> status: Unknown
Memory: RAM: total: 1.91 GiB used: 301.3 MiB (15.4%)
Array-1: capacity: 2 GiB note: est. slots: 2 EC: None max module size: 1 GiB note: est.
Device-1: DIMM 1 size: 1 GiB info: double-bank speed: Unknown type: SDRAM detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter>
Device-2: DIMM 2 size: 1 GiB info: double-bank speed: Unknown type: SDRAM detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter>
PCI Slots: Slot: Adapter 0, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available
length: Other
Slot: Adapter 1, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 2 status: Available
length: Other
Slot: 1 type: 32-bit PCI Mini-PCI Slot 1 status: Available length: Other
CPU: Topology: Single Core model: Mobile Intel Pentium 4 - M bits: 32 type: MCP
arch: Netburst Northwood family: F (15) model-id: 2 stepping: 7 microcode: 39 L1 cache: 8 KiB
L2 cache: 512 KiB bogomips: 2397
Speed: 1200 MHz min/max: 1200/2000 MHz Core speed (MHz): 1: 1200
Flags: acpi bts cid clflush cmov cpuid cx8 de dts fpu fxsr ht mca mce mmx msr mtrr pae pat pbe
pebs pge pse pse36 pti sep ss sse sse2 tm tsc vme xtpr
Vulnerabilities: Type: l1tf mitigation: PTE Inversion
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline
Graphics: Device-1: Advanced Micro Devices [AMD/ATI] RV200/M7 GL [Mobility FireGL 7800] vendor: IBM
driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:4c58
Display: server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa
resolution: 1600x1200~60Hz
OpenGL: renderer: Mesa DRI R100 (RV200 4C58) x86/MMX/SSE2 DRI2 v: 1.3 Mesa 18.2.6
direct render: Yes
Audio: Device-1: Intel 82801CA/CAM AC97 Audio vendor: IBM ThinkPad T30 driver: snd_intel8x0 v: kernel
bus ID: 00:1f.5 chip ID: 8086:2485
Sound Server: ALSA v: k4.19.0-1-686-pae
Network: Device-1: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq port: 3000
bus ID: 02:02.0 chip ID: 8086:4220
IF: eth1 state: down mac: <filter>
Device-2: Intel 82801CAM PRO/100 VE Ethernet vendor: IBM ThinkPad A/T/X Series driver: e100
v: 3.5.24-k2-NAPI port: 8000 bus ID: 02:08.0 chip ID: 8086:1031
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic scope: global broadcast: <filter>
IP v6: <filter> type: dynamic scope: global
IP v6: <filter> type: noprefixroute dynamic scope: global
IP v6: <filter> scope: link
Device-3: Ralink RT2800 802.11n PCI driver: rt2800pci v: 2.3.0 port: 8000 bus ID: 03:00.0
chip ID: 1814:0601
IF: wlan0 state: down mac: <filter>
WAN IP: No WAN IP data found. Connected to the web? SSL issues?
Drives: Local Storage: total: 465.76 GiB used: 4.78 GiB (1.0%)
ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO mSATA 500GB size: 465.76 GiB block size:
physical: 512 B logical: 512 B speed: <unknown> serial: <filter> rev: 1B6Q scheme: MBR
Floppy-1: /dev/fd0
Optical-1: /dev/sr0 vendor: HL-DT-ST model: RW/DVD GCC-4240N rev: 0211 dev-links: cdrom,cdrw,dvd
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw state: running
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: 32.00 GiB size: 31.25 GiB (97.65%) used: 4.72 GiB (15.1%) fs: ext4
block size: 4096 B dev: /dev/sda1 label: rootMX18 uuid: c7ea50f9-3dd7-48a3-be9f-e28afbf5d241
ID-2: /home raw size: 216.00 GiB size: 211.61 GiB (97.97%) used: 94.1 MiB (0.0%) fs: ext4
block size: 4096 B dev: /dev/sda2 label: homeMX18 uuid: 7959cf3f-8255-47c1-9b67-a91ee7f9e4a6
ID-3: /media/jason/DATA raw size: 215.76 GiB size: 211.37 GiB (97.97%) used: 60.0 MiB (0.0%)
fs: ext4 block size: 4096 B dev: /dev/sda3 label: DATA uuid: 7ea00ee0-1f86-4aec-8c4f-1063960309e6
ID-4: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default)
cache pressure: 100 (default) dev: /dev/sda4 label: SWAP
uuid: 231da768-e783-418a-a4fa-54dbc85841ef
Unmounted: Message: No unmounted partitions found.
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Sensors: System Temperatures: cpu: 41.0 C mobo: 24.0 C
Fan Speeds (RPM): cpu: 3405
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/stretch stretch main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.ca.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.ca.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://iso.mxrepo.com/mx/repo/ stretch main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes: CPU top: 5
1: cpu: 5.1% command: xorg pid: 2327 mem: 41.4 MiB (2.1%)
2: cpu: 3.2% command: applet.py started by: python3 pid: 3308 mem: 25.4 MiB (1.3%)
3: cpu: 2.4% command: conky pid: 3530 mem: 10.2 MiB (0.5%)
4: cpu: 2.0% command: sudo pid: 4017 mem: 5.14 MiB (0.2%)
5: cpu: 1.5% command: apt-notifier.py started by: python pid: 3398 mem: 75.7 MiB (3.8%)
Memory top: 5
1: mem: 75.7 MiB (3.8%) command: apt-notifier.py started by: python pid: 3398 cpu: 1.5%
2: mem: 41.4 MiB (2.1%) command: xorg pid: 2327 cpu: 5.1%
3: mem: 35.0 MiB (1.7%) command: xfce4-terminal pid: 3145 cpu: 1.1%
4: mem: 34.9 MiB (1.7%) command: tumblerd pid: 3164 cpu: 0.8%
5: mem: 32.7 MiB (1.6%) command: xfdesktop pid: 3115 cpu: 1.1%
Info: Processes: 157 Uptime: 2m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0
alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25 MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
Re: MX-18 beta 1 feedback
Thinkpad T43p (2005-2006):
Works fine!
sudo inxi -v8 -z
Works fine!
sudo inxi -v8 -z
Code: Select all
System: Host: Thinkpad-T43p-Linux-MX18b1 Kernel: 4.19.0-1-686-pae i686 bits: 32 compiler: gcc v: 6.3.0
Desktop: Xfce 4.12.3 tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3
Distro: MX-18b1_386 Continuum December 3 2018 base: Debian GNU/Linux 9 (stretch)
Machine: Type: Laptop System: IBM product: 2668H2U v: ThinkPad T43p serial: <filter> Chassis: type: 10
serial: N/A
Mobo: IBM model: 2668H2U serial: <filter> BIOS: IBM v: 1YET59WW (1.24 ) date: 11/07/2005
Battery: ID-1: BAT0 charge: 62.4 Wh condition: 62.4/77.8 Wh (80%) volts: 12.5/10.8
model: Panasonic IBM-92P1068 type: Li-ion serial: <filter> status: Full
Memory: RAM: total: 1.90 GiB used: 297.5 MiB (15.3%)
Array-1: capacity: 2 GiB note: est. slots: 2 EC: None max module size: 1 GiB
Device-1: DIMM 1 size: 1 GiB info: double-bank speed: Unknown type: DDR detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter>
Device-2: DIMM 2 size: 1 GiB info: double-bank speed: Unknown type: DDR detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter>
PCI Slots: Slot: Adapter 0, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available
length: Other
Slot: 1 type: 32-bit PCI Mini-PCI Slot 1 status: Available length: Other
CPU: Topology: Single Core model: Intel Pentium M bits: 32 type: MCP arch: M Dothan family: 6
model-id: D (13) stepping: 8 microcode: 20 L1 cache: 32 KiB L2 cache: 2048 KiB bogomips: 1596
Speed: 800 MHz min/max: 800/2133 MHz Core speed (MHz): 1: 1066
Flags: acpi apic bts clflush cmov cpuid cx8 de dts est fpu fxsr mca mce mmx msr mtrr nx pae pbe
pge pse pti sep ss sse sse2 tm tm2 tsc vme
Vulnerabilities: Type: l1tf mitigation: PTE Inversion
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline
Graphics: Device-1: Advanced Micro Devices [AMD/ATI] RV380/M24 GL [Mobility FireGL V3200] vendor: IBM
driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:3154
Display: server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa
resolution: 1600x1200~60Hz
OpenGL: renderer: ATI RV380 v: 2.1 Mesa 18.2.6 direct render: Yes
Audio: Device-1: Intel 82801FB/FBM/FR/FW/FRW AC97 Audio vendor: IBM driver: snd_intel8x0 v: kernel
bus ID: 00:1e.2 chip ID: 8086:266e
Sound Server: ALSA v: k4.19.0-1-686-pae
Network: Device-1: Broadcom Limited NetXtreme BCM5751M Gigabit Ethernet PCI Express
vendor: IBM ThinkPad X41 / Z60t driver: tg3 v: 3.137 port: 3000 bus ID: 02:00.0
chip ID: 14e4:167d
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic scope: global broadcast: <filter>
IP v6: <filter> type: dynamic scope: global
IP v6: <filter> type: noprefixroute dynamic scope: global
IP v6: <filter> scope: link
Device-2: Intel PRO/Wireless 2200BG [Calexico2] Network driver: ipw2200 v: 1.2.2kmprq port: 3000
bus ID: 04:02.0 chip ID: 8086:4220
IF: eth1 state: up mac: <filter>
IP v4: <filter> type: dynamic scope: global broadcast: <filter>
IP v6: <filter> type: dynamic scope: global
IP v6: <filter> type: noprefixroute dynamic scope: global
IP v6: <filter> scope: link
Device-3: Ralink RT2800 802.11n PCI driver: rt2800pci v: 2.3.0 port: 3000 bus ID: 05:00.0
chip ID: 1814:0601
IF: wlan0 state: up mac: <filter>
IP v4: <filter> type: dynamic scope: global broadcast: <filter>
IP v6: <filter> type: dynamic scope: global
IP v6: <filter> type: noprefixroute dynamic scope: global
IP v6: <filter> scope: link
WAN IP: No WAN IP data found. Connected to the web? SSL issues?
Drives: Local Storage: total: 298.09 GiB used: 8.32 GiB (2.8%)
ID-1: /dev/sda vendor: Western Digital model: WD3200BEVE-00A0HT0 size: 298.09 GiB block size:
physical: 512 B logical: 512 B speed: <unknown> rotation: 5400 rpm serial: <filter> rev: 1A11
temp: 25 C scheme: MBR
Floppy-1: /dev/fd0
Optical-1: /dev/sr0 vendor: MATSHITA model: DVD-RAM UJ-822S rev: 1.61
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
state: running
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: 296.09 GiB size: 290.44 GiB (98.09%) used: 8.32 GiB (2.9%) fs: ext4
block size: 4096 B dev: /dev/sda1 label: rootMX18 uuid: 9c1f7067-ce25-4d9f-a3d7-4db42bf19598
ID-2: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default)
cache pressure: 100 (default) dev: /dev/sda2 label: SWAP
uuid: db30d1e2-4571-4c44-8dc8-b29bb5b5d542
Unmounted: Message: No unmounted partitions found.
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Device-1: 3-2:2 info: STMicro Fingerprint Reader type: <vendor specific> driver: N/A
interfaces: 1 rev: 1.0 speed: 12 Mb/s chip ID: 0483:2016
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002
Sensors: System Temperatures: cpu: 39.0 C mobo: 37.0 C
Fan Speeds (RPM): cpu: 3081
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/stretch stretch main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.ca.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.ca.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://iso.mxrepo.com/mx/repo/ stretch main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes: CPU top: 5
1: cpu: 2.0% command: applet.py started by: python3 pid: 3719 mem: 25.5 MiB (1.3%)
2: cpu: 1.9% command: xorg pid: 2420 mem: 62.5 MiB (3.2%)
3: cpu: 1.7% command: conky pid: 4121 mem: 10.7 MiB (0.5%)
4: cpu: 1.6% command: hp-systray started by: python3 pid: 3684 mem: 76.9 MiB (3.9%)
5: cpu: 1.0% command: networkmanager pid: 2431 mem: 13.7 MiB (0.7%)
Memory top: 5
1: mem: 76.9 MiB (3.9%) command: hp-systray started by: python3 pid: 3684 cpu: 1.6%
2: mem: 74.3 MiB (3.8%) command: apt-notifier.py started by: python pid: 3970 cpu: 0.8%
3: mem: 62.5 MiB (3.2%) command: xorg pid: 2420 cpu: 1.9%
4: mem: 34.0 MiB (1.7%) command: xfce4-terminal pid: 3476 cpu: 0.6%
5: mem: 32.6 MiB (1.6%) command: xfdesktop pid: 3451 cpu: 0.7%
Info: Processes: 161 Uptime: 2m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0
alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
Re: MX-18 beta 1 feedback
Thinkpad T60p (2006-2007):
Works fine!
sudo inxi -v8 -z
Works fine!
sudo inxi -v8 -z
Code: Select all
System: Host: Thinkpad-T60p-Linux-MX18b1 Kernel: 4.19.0-1-amd64 x86_64 bits: 64 compiler: gcc v: 6.3.0
Desktop: Xfce 4.12.3 tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3
Distro: MX-18b1_x64 Continuum December 3 2018 base: Debian GNU/Linux 9 (stretch)
Machine: Type: Laptop System: LENOVO product: 2007WLY v: ThinkPad T60p serial: <filter> Chassis: type: 10
serial: N/A
Mobo: LENOVO model: 2007WLY serial: <filter> BIOS: LENOVO v: 79ETE7WW (2.27 ) date: 03/21/2011
Battery: ID-1: BAT0 charge: 64.5 Wh condition: 64.5/84.2 Wh (77%) volts: 12.4/10.8
model: Panasonic 92P1133 type: Li-ion serial: <filter> status: Full
Memory: RAM: total: 2.93 GiB used: 385.7 MiB (12.9%)
Array-1: capacity: 4 GiB note: est. slots: 2 EC: None max module size: 2 GiB
Device-1: DIMM 1 size: 2 GiB info: double-bank speed: Unknown type: DDR2 detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter>
Device-2: DIMM 2 size: 2 GiB info: double-bank speed: Unknown type: DDR2 detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter>
PCI Slots: Slot: 0 type: x1 PCI Express ExpressCard Slot 1 status: Available length: Other
Slot: Adapter 1, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available
length: Other
CPU: Topology: Dual Core model: Intel Core2 T7200 bits: 64 type: MCP arch: Core Merom family: 6
model-id: F (15) stepping: 6 microcode: D1 L1 cache: 128 KiB L2 cache: 4096 KiB bogomips: 7979
Speed: 1810 MHz min/max: 1000/2000 MHz Core speeds (MHz): 1: 997 2: 997
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl
dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe
pdcm pebs pge pni pse pse36 pti rep_good sep ss sse sse2 ssse3 syscall tm tm2 tpr_shadow tsc vme
vmx xtpr
Vulnerabilities: Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline
Graphics: Device-1: Advanced Micro Devices [AMD/ATI] RV530/M56 GL [Mobility FireGL V5200]
vendor: Lenovo ThinkPad T60p driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:71c4
Display: server: X.Org 1.19.2 driver: ati,radeon unloaded: fbdev,modesetting,vesa
resolution: 1600x1200~60Hz
OpenGL: renderer: ATI RV530 v: 2.1 Mesa 18.2.6 direct render: Yes
Audio: Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Lenovo ThinkPad R60/T60/X60 series
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8
Sound Server: ALSA v: k4.19.0-1-amd64
Network: Device-1: Intel 82573L Gigabit Ethernet vendor: Lenovo ThinkPad T60 driver: e1000e v: 3.2.6-k
port: 3000 bus ID: 02:00.0 chip ID: 8086:109a
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic scope: global broadcast: <filter>
IP v6: <filter> type: dynamic scope: global
IP v6: <filter> type: noprefixroute dynamic scope: global
IP v6: <filter> scope: link
Device-2: Intel Ultimate N WiFi Link 5300 driver: iwlwifi v: kernel port: 3000 bus ID: 03:00.0
chip ID: 8086:4236
IF: wlan0 state: up mac: <filter>
IP v4: <filter> type: dynamic scope: global broadcast: <filter>
IP v6: <filter> type: dynamic scope: global
IP v6: <filter> type: noprefixroute dynamic scope: global
IP v6: <filter> scope: link
WAN IP: No WAN IP data found. Connected to the web? SSL issues?
Drives: Local Storage: total: 238.47 GiB used: 4.84 GiB (2.0%)
ID-1: /dev/sda vendor: Samsung model: SSD PM810 FDE 2.5 256GB size: 238.47 GiB block size:
physical: 512 B logical: 512 B speed: 1.5 Gb/s serial: <filter> rev: 7D1Q scheme: MBR
Optical-1: /dev/sr0 vendor: HL-DT-ST model: DVDRAM GSA-4083N rev: 1.08
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
state: running
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: 234.47 GiB size: 229.79 GiB (98.00%) used: 4.84 GiB (2.1%) fs: ext4
block size: 4096 B dev: /dev/sda1 label: rootMX18 uuid: d95553fb-6eeb-40da-85d3-cc5e104d64ba
ID-2: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default)
cache pressure: 100 (default) dev: /dev/sda2 label: SWAP
uuid: ef0e0fef-4bbc-4485-888d-d98c7e38ba3d
Unmounted: Message: No unmounted partitions found.
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Device-1: 3-1:2 info: Sierra Wireless MC5720 Wireless Modem type: <vendor specific>
driver: sierra interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 1199:0218
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Device-2: 5-1:2 info: Broadcom BCM2045B (BDC-2) [Bluetooth Controller] type: Bluetooth
driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 0a5c:2110
Device-3: 5-2:3 info: STMicro Fingerprint Reader type: <vendor specific> driver: N/A
interfaces: 1 rev: 1.0 speed: 12 Mb/s chip ID: 0483:2016
Sensors: System Temperatures: cpu: 46.0 C mobo: 29.0 C
Fan Speeds (RPM): cpu: 0
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/stretch stretch main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.ca.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.ca.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://iso.mxrepo.com/mx/repo/ stretch main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes: CPU top: 5
1: cpu: 1.3% command: xorg pid: 2692 mem: 69.9 MiB (2.3%)
2: cpu: 1.3% command: conky pid: 4420 mem: 11.7 MiB (0.3%)
3: cpu: 1.2% command: modemmanager pid: 2843 mem: 8.63 MiB (0.2%)
4: cpu: 0.7% command: applet.py started by: python3 pid: 4032 mem: 33.1 MiB (1.1%)
5: cpu: 0.5% command: init pid: 1 mem: 1.86 MiB (0.0%)
Memory top: 5
1: mem: 82.4 MiB (2.7%) command: apt-notifier.py started by: python pid: 4307 cpu: 0.2%
2: mem: 69.9 MiB (2.3%) command: xorg pid: 2692 cpu: 1.3%
3: mem: 39.5 MiB (1.3%) command: tumblerd pid: 3913 cpu: 0.2%
4: mem: 36.8 MiB (1.2%) command: xfce4-terminal pid: 3875 cpu: 0.2%
5: mem: 36.0 MiB (1.2%) command: nm-applet pid: 4009 cpu: 0.4%
Info: Processes: 180 Uptime: 4m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0
alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
Re: MX-18 beta 1 feedback
Thinkpad x60 Tablet aka x60t (2006-2007):
Boot Delay error still there! Need to implement fix from forums!
Fix (manual):
- update MX-18 to X.Org 1.19.6 as per stevo:
- viewtopic.php?f=134&t=45522
can this update be included in MX-18? It's been working fine in MX17.1 for a while.
Screen Rotation and Wacom Pen Alignment problem also persists.
Display > Rotation works correctly but the pen/mouse/pointer doesn't match the rotation making the pen useful only in non-rotated mode. I have no fix for this but it is a long-standing linux issue.
sudo inxi -v8 -z
Boot Delay error still there! Need to implement fix from forums!
Fix (manual):
- update MX-18 to X.Org 1.19.6 as per stevo:
- viewtopic.php?f=134&t=45522
can this update be included in MX-18? It's been working fine in MX17.1 for a while.
Screen Rotation and Wacom Pen Alignment problem also persists.
Display > Rotation works correctly but the pen/mouse/pointer doesn't match the rotation making the pen useful only in non-rotated mode. I have no fix for this but it is a long-standing linux issue.
sudo inxi -v8 -z
Code: Select all
System: Host: Thinkpad-x60t-Linux-MX18b1 Kernel: 4.19.0-1-amd64 x86_64 bits: 64 compiler: gcc v: 6.3.0
Desktop: Xfce 4.12.3 tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3
Distro: MX-18b1_x64 Continuum December 3 2018 base: Debian GNU/Linux 9 (stretch)
Machine: Type: Laptop System: LENOVO product: 6363C7U v: ThinkPad X60 Tablet serial: <filter> Chassis:
type: 10 serial: N/A
Mobo: LENOVO model: 6363C7U serial: <filter> BIOS: LENOVO v: 7JET30WW (1.15 ) date: 11/20/2008
Battery: ID-1: BAT0 charge: 42.4 Wh condition: 42.7/66.2 Wh (64%) volts: 16.5/14.4 model: SANYO 93P5032
type: Li-ion serial: <filter> status: Unknown
Memory: RAM: total: 2.92 GiB used: 366.7 MiB (12.2%)
Array-1: capacity: 4 GiB note: est. slots: 2 EC: None max module size: 2 GiB
Device-1: DIMM 1 size: 2 GiB info: double-bank speed: Unknown type: DDR2 detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter>
Device-2: DIMM 2 size: 2 GiB info: double-bank speed: Unknown type: DDR2 detail: synchronous
bus width: 64 bits total: 64 bits manufacturer: N/A part-no: Not Specified serial: <filter>
PCI Slots: Slot: Adapter 1, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available
length: Other
Slot: N/A type: SD Card Slot 1 status: Available length: Other
CPU: Topology: Dual Core model: Intel Core2 L7400 bits: 64 type: MCP arch: Core Merom family: 6
model-id: F (15) stepping: 6 microcode: D1 L1 cache: 128 KiB L2 cache: 4096 KiB bogomips: 5984
Speed: 1418 MHz min/max: 1000/1500 MHz Core speeds (MHz): 1: 1209 2: 1068
Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid cx16 cx8 de ds_cpl
dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca mce mmx monitor msr mtrr nopl nx pae pat pbe pdcm
pebs pge pni pse pse36 pti rep_good sep ss sse sse2 ssse3 syscall tm tm2 tpr_shadow tsc vme vmx xtpr
Vulnerabilities: Type: l1tf mitigation: PTE Inversion
Type: meltdown mitigation: PTI
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline
Graphics: Device-1: Intel Mobile 945GM/GMS 943/940GML Express Integrated Graphics
vendor: Lenovo ThinkPad R60/T60/X60 series driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:27a2
Display: server: X.Org 1.19.2 driver: intel resolution: 1400x1050~50Hz
OpenGL: renderer: Mesa DRI Intel 945GM v: 1.4 Mesa 18.2.6 direct render: Yes
Audio: Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Lenovo ThinkPad R60/T60/X60 series
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8
Sound Server: ALSA v: k4.19.0-1-amd64
Network: Device-1: vendor: Lenovo driver: N/A port: 2000 bus ID: 02:00.0 chip ID: 682c:109a
Device-2: Intel PRO/Wireless 3945ABG [Golan] Network driver: iwl3945 v: in-tree:s port: 2000
bus ID: 03:00.0 chip ID: 8086:4227
IF: wlan0 state: down mac: <filter>
WAN IP: No WAN IP data found. Connected to the web? SSL issues?
Drives: Local Storage: total: 1.82 TiB used: 4.63 GiB (0.2%)
ID-1: /dev/sda vendor: Seagate model: ST2000LX001-1RG174 size: 1.82 TiB block size: physical: 4096 B
logical: 512 B speed: 1.5 Gb/s rotation: 5400 rpm serial: <filter> rev: SDM1 temp: 42 C scheme: MBR
Optical-1: /dev/sr0 vendor: Optiarc model: DVD RW AD-7910A rev: 1.D1 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24 multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram
state: running
RAID: Message: No RAID data was found.
Partition: ID-1: / raw size: 929.51 GiB size: 913.92 GiB (98.32%) used: 4.63 GiB (0.5%) fs: ext4
block size: 4096 B dev: /dev/sda3 label: rootMX18 uuid: 3d3361da-db6b-4b6a-b8c6-e5bf2475c769
ID-2: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 60 (default)
cache pressure: 100 (default) dev: /dev/sda4 label: SWAP-Linux
uuid: bab3f890-e58e-4ce4-9aa6-6651414abf0b
Unmounted: ID-1: /dev/sda1 size: 100.0 MiB fs: ntfs label: System Reserved uuid: A61CD5F91CD5C489
ID-2: /dev/sda2 size: 929.41 GiB fs: ntfs label: N/A uuid: 4662E92B62E92083
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001
Device-1: 4-1:2 info: STMicro Fingerprint Reader type: <vendor specific> driver: N/A interfaces: 1
rev: 1.0 speed: 12 Mb/s chip ID: 0483:2016
Device-2: 4-2:3 info: Broadcom BCM2045B (BDC-2) [Bluetooth Controller] type: Bluetooth driver: btusb
interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 0a5c:2110
Hub: 5-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 5-6:2 info: Lenovo Hub ports: 4 rev: 2.0 speed: 480 Mb/s chip ID: 17ef:1000
Sensors: System Temperatures: cpu: 50.0 C mobo: 49.0 C
Fan Speeds (RPM): cpu: 3467
Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list
1: deb http://iso.mxrepo.com/antix/stretch stretch main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://ftp.ca.debian.org/debian/ stretch-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://ftp.ca.debian.org/debian/ stretch main contrib non-free
2: deb http://security.debian.org/ stretch/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://iso.mxrepo.com/mx/repo/ stretch main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
Processes: CPU top: 5
1: cpu: 1.4% command: xfwm4 pid: 3359 mem: 20.8 MiB (0.6%)
2: cpu: 0.9% command: conky pid: 3881 mem: 13.7 MiB (0.4%)
3: cpu: 0.6% command: xorg pid: 2900 mem: 21.7 MiB (0.7%)
4: cpu: 0.6% command: xfsettingsd pid: 3370 mem: 20.2 MiB (0.6%)
5: cpu: 0.6% command: applet.py started by: python3 pid: 3425 mem: 33.2 MiB (1.1%)
Memory top: 5
1: mem: 82.8 MiB (2.7%) command: apt-notifier.py started by: python pid: 3586 cpu: 0.3%
2: mem: 37.9 MiB (1.2%) command: tumblerd pid: 3545 cpu: 0.2%
3: mem: 37.4 MiB (1.2%) command: nm-applet pid: 3452 cpu: 0.6%
4: mem: 36.8 MiB (1.2%) command: xfce4-terminal pid: 3784 cpu: 0.6%
5: mem: 33.2 MiB (1.1%) command: applet.py started by: python3 pid: 3425 cpu: 0.6%
Info: Processes: 172 Uptime: 8m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0 alt: 6
Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25 MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
Re: MX-18 beta 1 feedback
This Tablet Rotation and Pen Alignment error also applies to the Thinkpads x61t, x200t, and x220t. Presumably others too, does anyone have a pen tablet working properly with Linux?
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
Re: MX-18 beta 1 feedback
General random notes on MX-18b1 32-bit testing:
MX-18 Testing Beta 1 32-bit
General:
- MX Welcome Tools icon doesn't match regular icon for mxtools, make same (also codecs).
- add AntiX-cli-cc to MX Testing Repo, if not popular apps
- LibreOffice 1:6.1.3-1~bpo9+2 from Backports might be the last 32-bit LibreOffice (no 32-bit 6.2 from TDF), be good to have it as the default (if GIMP can be newer than stable 2.10.8 vs. 2.8.22 (?) why not LibreOffice just moving to a more stable bug-fixed version?). FWIW, latest is 2018-11-30: https://downloadarchive.documentfoundat ... 1.4.1/deb/
- MX Package Installer:
- re-order tabs, Backports should be before Test repo
- Audio: add exfalso, quodlibet, maybe add old audio packages from alsa project (see 600x fix above)
- Browsers: add palemoon-nonsse2 single core to Popular apps on 32-bit for older low-spec computers (to match kernel option), Dillo, Links2 because Firefox struggles on really old computers!
- Desktop Environments: LXQT
- Development : add Bluefish
- FileManagers: add xfe
- Games: DOSBOX! ScummVM, gnugo, gnubg, pychess, triplea, etc...
- Graphics: AZpainter, LightZone, Scribus should be 1.4.7 for main popular option, 1.5.x for testing
- Office: FocusWriter
- Wallpapers: MX17, AntiX
- Window Managers: add i3, update iceWM to 1.4.3.0~pre-20181030-2 (so that sending app to workspace works properly, this has been working well for me in antiX 17.x Testing/Buster)
- add a section for Terminal apps: include the amazing AntiX-cli-cc
MX-18 Testing Beta 1 32-bit
General:
- MX Welcome Tools icon doesn't match regular icon for mxtools, make same (also codecs).
- add AntiX-cli-cc to MX Testing Repo, if not popular apps
- LibreOffice 1:6.1.3-1~bpo9+2 from Backports might be the last 32-bit LibreOffice (no 32-bit 6.2 from TDF), be good to have it as the default (if GIMP can be newer than stable 2.10.8 vs. 2.8.22 (?) why not LibreOffice just moving to a more stable bug-fixed version?). FWIW, latest is 2018-11-30: https://downloadarchive.documentfoundat ... 1.4.1/deb/
- MX Package Installer:
- re-order tabs, Backports should be before Test repo
- Audio: add exfalso, quodlibet, maybe add old audio packages from alsa project (see 600x fix above)
- Browsers: add palemoon-nonsse2 single core to Popular apps on 32-bit for older low-spec computers (to match kernel option), Dillo, Links2 because Firefox struggles on really old computers!
- Desktop Environments: LXQT
- Development : add Bluefish
- FileManagers: add xfe
- Games: DOSBOX! ScummVM, gnugo, gnubg, pychess, triplea, etc...
- Graphics: AZpainter, LightZone, Scribus should be 1.4.7 for main popular option, 1.5.x for testing
- Office: FocusWriter
- Wallpapers: MX17, AntiX
- Window Managers: add i3, update iceWM to 1.4.3.0~pre-20181030-2 (so that sending app to workspace works properly, this has been working well for me in antiX 17.x Testing/Buster)
- add a section for Terminal apps: include the amazing AntiX-cli-cc
MX-17.1: Thinkpad x60t, x61t, x200t, x220t.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
MX-18 (32-bit) Thinkpads: 600x*, A31p, T43p, T60p;
MX-18 (64-bit): MacBook13(5,1), Thinkpad x61s, T61pW, T601pF, x200, x301*, T500, W500, W700, W700ds, W701, W701ds*, x220, W520.
Re: MX-18 beta 1 feedback
There is an xserver-xorg-video-neomagic video driver in Synaptic, but maybe it's not for your chipset, or else you need to specify it in an xorg.conf type file if you have it installed and it's still using the vesa driver.Hierax_ca wrote: Tue Dec 11, 2018 11:10 pm Thinkpad 600x (1999-2001)
Display Color and Audio Sound issues persist (started with antix-17 and mx-17, works properly with MX-14.4 and 16.1):
Color Problem:
- colors display as inverted/opposite -- e.g., yellow=purple, blue=green. Note: this problem doesn't happen in AntiX-core cli console interface, issue occurs only with xorg running.
$ inxi -GxxxColor Solution:Code: Select all
Graphics: Device-1: Neomagic NM2360 [MagicMedia 256ZX] vendor: IBM ThinkPad 600X driver: N/A bus ID: 01:00.0 chip ID: 10c8:0006 Display: x11 server: X.Org 1.19.2 driver: vesa resolution: 1024x768~61Hz OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.6 compat-v: 3.1 direct render: Yes
- sudo nano on /etc/X11/xorg.conf
- changed color depth to 16-bit by adding last line: "DefaultDepth 16"
Is there a way to have the color depth detected on install and change this automatically or semi-manually with an Fn button option in the Live boot or installer? Or some MX tool for low color resolution? Or something to get color displaying properly on ancient computers like this? Was whatever that did this before (with MX-14.4 and -16.1) removed?
Sound Problem:
- MX Select Sound: "No sound cards/devices were found"
Before Fix
$ inxi -AxxxSound Solution (manual):Code: Select all
Audio: Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] vendor: IBM ThinkPad 600X/A20m driver: N/A bus ID: 00:06.0 chip ID: 1013:6003 Sound Server: ALSA v: k4.19.0-1-686-pae
- download latest old firmware: ftp://ftp.alsa-project.org/pub/firmware ... 29.tar.bz2 (2015-02-20)
- right click in Thunar extract here
- copy cs46xx folder
- open Root Thunar
- paste to /lib/firmware/
- open terminal "sudo modprobe -r snd-cs46xx" then "sudo modprobe snd-cs46xx"
Could this cs46xx firmware be included in the 32-bit .iso (or an MX tool created that could extract and paste the needed driver)? There are also numerous other old sound cards here in the file that might help other people with really old laptops.
After Fix:
$ inxi -AxxxCode: Select all
Audio: Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] vendor: IBM ThinkPad 600X/A20m driver: snd_cs46xx v: kernel bus ID: 00:06.0 chip ID: 1013:6003 Sound Server: ALSA v: k4.19.0-1-686-pae
Full inxi
sudo inxi -v8 -zCode: Select all
System: Host: mx1 Kernel: 4.19.0-1-686-pae i686 bits: 32 compiler: gcc v: 6.3.0 Desktop: Xfce 4.12.3 tk: Gtk 2.24.31 info: xfce4-panel wm: xfwm4 dm: LightDM 1.18.3 Distro: MX-18b1_386 Continuum December 3 2018 base: Debian GNU/Linux 9 (stretch) Machine: Type: Laptop System: IBM product: 26468EU v: N/A serial: <filter> Chassis: type: 10 serial: N/A Mobo: IBM model: 26468EU serial: <filter> BIOS: IBM v: ITET55WW date: 11/30/1999 Battery: ID-1: BAT0 charge: 43.3 Wh condition: 45.4/45.4 Wh (100%) volts: 11.8/10.8 model: IBM Corporation ThinkPad Battery type: Li-ion serial: N/A status: Unknown Memory: RAM: total: 494.6 MiB used: 234.3 MiB (47.4%) Array-1: capacity: 768 MiB note: est. slots: 3 EC: None max module size: 256 MiB Device-1: DIMM 0 size: 64 MiB info: single-bank speed: type: Other detail: synchronous bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A Device-2: DIMM 1 size: 256 MiB info: double-bank speed: type: Other detail: synchronous bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A Device-3: DIMM 2 size: 256 MiB info: double-bank speed: type: Other detail: synchronous bus width: 64 bits total: 64 bits manufacturer: N/A part-no: N/A serial: N/A PCI Slots: Slot: Adapter 0, Socket 0 type: 32-bit PC Card (PCMCIA) CardBus Slot 1 status: Available length: Other Slot: Adapter 0, Socket 1 type: 32-bit PC Card (PCMCIA) CardBus Slot 2 status: Available length: Other CPU: Topology: Single Core model: Pentium III (Coppermine) bits: 32 type: MCP arch: P6 III Coppermine family: 6 model-id: 8 stepping: 6 microcode: 9 L1 cache: 32 KiB L2 cache: 256 KiB bogomips: 1694 Speed: 850 MHz min/max: 700/850 MHz Core speed (MHz): 1: 850 Flags: cmov cpuid cx8 de fpu fxsr mca mce mmx msr mtrr pae pge pse pse36 pti sep sse tsc vme Vulnerabilities: Type: l1tf mitigation: PTE Inversion Type: meltdown mitigation: PTI Type: spec_store_bypass status: Vulnerable Type: spectre_v1 mitigation: __user pointer sanitization Type: spectre_v2 mitigation: Full generic retpoline Graphics: Device-1: Neomagic NM2360 [MagicMedia 256ZX] vendor: IBM ThinkPad 600X driver: N/A bus ID: 01:00.0 chip ID: 10c8:0006 Display: server: X.Org 1.19.2 driver: vesa resolution: 1024x768~61Hz OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.6 compat-v: 3.1 direct render: Yes Audio: Device-1: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] vendor: IBM ThinkPad 600X/A20m driver: N/A bus ID: 00:06.0 chip ID: 1013:6003 Sound Server: ALSA v: k4.19.0-1-686-pae Network: Device-1: Intel 82371AB/EB/MB PIIX4 ISA type: network bridge driver: N/A port: 4400 bus ID: 00:07.0 chip ID: 8086:7110 Device-2: Intel 82371AB/EB/MB PIIX4 ACPI type: network bridge driver: N/A port: 4000 bus ID: 00:07.3 chip ID: 8086:7113 Device-3: Ralink RT2800 802.11n PCI driver: rt2800pci v: 2.3.0 port: 4000 bus ID: 06:00.0 chip ID: 1814:0601 IF: wlan0 state: down mac: <filter> WAN IP: No WAN IP data found. Connected to the web? SSL issues? Drives: Local Storage: total: 119.24 GiB used: 35.7 MiB (0.0%) ID-1: /dev/sda vendor: Crucial model: CT128M550SSD3 size: 119.24 GiB block size: physical: 4096 B logical: 512 B speed: <unknown> serial: <filter> rev: MU01 temp: 43 C scheme: MBR Floppy-1: /dev/fd0 Optical-1: /dev/sr0 vendor: TOSHIBA model: DVD-ROM SD-C2612 rev: 1011 dev-links: cdrom,dvd Features: speed: 24 multisession: yes audio: yes dvd: yes rw: none state: running RAID: Message: No RAID data was found. Partition: ID-1: / raw size: N/A size: 374.0 MiB used: 19.7 MiB (5.3%) fs: overlay dev: ERR-102 label: N/A uuid: N/A ID-2: /live/boot-dev raw size: 1.29 GiB size: 1.29 GiB (99.94%) used: 1.29 GiB (100.0%) fs: iso9660 block size: 2048 B dev: /dev/sr0 label: antiXlive uuid: 2018-12-03-02-22-49-00 ID-3: swap-1 size: 2.05 GiB used: 16.0 MiB (0.8%) fs: swap swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/sda2 label: N/A uuid: e1d91df4-8549-41c8-9868-b42919b504c1 Unmounted: ID-1: /dev/sda1 size: 117.20 GiB fs: ext4 label: N/A uuid: 5c84ae89-d35e-46b9-bb10-905c61f3f9b9 USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s chip ID: 1d6b:0001 Sensors: Message: No sensors data was found. Is sensors configured? Repos: Active apt repos in: /etc/apt/sources.list.d/antix.list 1: deb http://iso.mxrepo.com/antix/stretch stretch main Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://ftp.us.debian.org/debian/ stretch-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://ftp.us.debian.org/debian/ stretch main contrib non-free 2: deb http://security.debian.org/ stretch/updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/mx.list 1: deb http://mxrepo.com/mx/repo/ stretch main non-free No active apt repos in: /etc/apt/sources.list.d/various.list Processes: CPU top: 5 1: cpu: 15.5% command: sudo pid: 4482 mem: 4.97 MiB (1.0%) 2: cpu: 6.9% command: xfce4-terminal pid: 4417 mem: 30.8 MiB (6.2%) 3: cpu: 6.1% command: libwhiskermenu.so started by: wrapper-1.0 pid: 4108 mem: 26.4 MiB (5.3%) 4: cpu: 5.2% command: xfwm4 pid: 3972 mem: 18.0 MiB (3.6%) 5: cpu: 5.1% command: xfsettingsd pid: 4052 mem: 15.8 MiB (3.2%) Memory top: 5 1: mem: 61.2 MiB (12.3%) command: apt-notifier.py started by: python pid: 4082 cpu: 3.9% 2: mem: 31.0 MiB (6.2%) command: xorg pid: 3536 cpu: 4.2% 3: mem: 30.8 MiB (6.2%) command: xfce4-terminal pid: 4417 cpu: 6.9% 4: mem: 29.7 MiB (5.9%) command: nm-applet pid: 4024 cpu: 3.5% 5: mem: 27.9 MiB (5.6%) command: yad pid: 4029 cpu: 3.2% Info: Processes: 152 Uptime: 10m Init: SysVinit v: 2.88 runlevel: 5 default: 5 Compilers: gcc: 6.3.0 alt: 6 Shell: bash (sudo) v: 4.4.12 running in: xfce4-terminal inxi: 3.0.25
-
Gordon Cooper
- Posts: 965
- Joined: Mon Nov 21, 2011 4:50 pm
Re: MX-18 beta 1 feedback
Thought I had commented here before. But no. Must have been writing to myself.
Hierax, many thanks for the MX-18/Thinkpad reports. There is a place for these on the MX Wiki. Meantime, will wait and see it there are any changes in the Mx-18 final release that may change the compatibility of those Thinkpads. IMHO you may be a bit hopeful with the X600, it is a old machine and perhaps has reached the end of its use by date ?
G.
Hierax, many thanks for the MX-18/Thinkpad reports. There is a place for these on the MX Wiki. Meantime, will wait and see it there are any changes in the Mx-18 final release that may change the compatibility of those Thinkpads. IMHO you may be a bit hopeful with the X600, it is a old machine and perhaps has reached the end of its use by date ?
G.
Backup: Dell9010, MX-19_B2, Win7, 120 SSD, WD 232GIB HD, 4GB RAM
Primary :Homebrew64 bit Intel duo core 2 GB RAM, 120 GB Kingston SSD, Seagate1TB.
MX-18.2 64bit. Also MX17, Kubuntu14.04 & Puppy 6.3.
Primary :Homebrew64 bit Intel duo core 2 GB RAM, 120 GB Kingston SSD, Seagate1TB.
MX-18.2 64bit. Also MX17, Kubuntu14.04 & Puppy 6.3.