M12 11.9.92

Forum rules
Post Reply
Message
Author
User avatar
kmathern
Developer
Posts: 2519
Joined: Wed Jul 12, 2006 2:26 pm

Re: M12 11.9.92

#201 Post by kmathern »

lucky9 wrote:...I'm not too sure that aufs is included with the Beta...
M12 has aufs enabled by default, I don't know if there's a way (a cheatcode) to disable it.
lucky9 wrote:...Specifying nouveau should not be necessary either.
M12 uses the Xorg KMS drivers by default including the nouveau driver for nvidia video cards, so you shouldn't need to do anything to enable it.

The 'nouveau.modeset=0 nomodeset' cheatcodes that Tim mentioned are used to disable the KMS driver, and force the vesa driver to be used instead.
A lot of those cheatcodes (video related cheats) aren't included in M12.
Last edited by kmathern on Sat Dec 28, 2013 5:59 pm, edited 2 times in total.
Top
User avatar
kmathern
Developer
Posts: 2519
Joined: Wed Jul 12, 2006 2:26 pm

Re: M12 11.9.92

#202 Post by kmathern »

GregB wrote:So far no joy. Is there any combination of cheatcodes that can aid in doing a diagnostic as to why X11 is failing to establish a valid GUI screen? I tried doing startx from a text mode console. It produces a log file in /var/log. If this log file has diagnostic value, is there any way that this log file can be saved to a permanent file so that I can post a copy of it?
The /var/log/Xorg.0.log file has diagnostic value. One way to post it would be to install the pastebinit package

Code: Select all

apt-get update 
apt-get install pastebinit
And then run it.

It returns a link with the contents of /var/log/Xorg.0.log that you can add to a post:
kent@mepis1:~$ pastebinit /var/log/Xorg.0.log
http://paste.debian.net/72907/
kent@mepis1:~$
This assumes you have a viewable terminal screen while in cli mode, and a working internet connection.
Top
User avatar
GregB
Posts: 11
Joined: Mon Mar 02, 2009 8:58 pm

Re: M12 11.9.92

#203 Post by GregB »

Thanks I'll give pastebinit a try. Is there any particular boot selection that would give the maximum diagnostic value? I can also include a log file from a MEPIS 11 installation that is currently running OK on the same PC. The MEPIS 11 install is running the nvidia driver.
Top
User avatar
GregB
Posts: 11
Joined: Mon Mar 02, 2009 8:58 pm

Re: M12 11.9.92

#204 Post by GregB »

Here are the Xorg.0.log files:

M12 Xorg.0.log using default boot option:

Code: Select all

[   110.204] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[   110.204] X Protocol Version 11, Revision 0
[   110.204] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[   110.204] Current Operating System: Linux mepis 3.9-1-mepis-pae #1 SMP MEPIS 3.9.8-1 i686
[   110.204] Kernel command line: initrd=/ubninit quiet splash fromhd BOOT_IMAGE=/ubnkern 
[   110.204] Build Date: 17 April 2013  11:13:16AM
[   110.204] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>) 
[   110.204] Current version of pixman: 0.26.0
[   110.204] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   110.204] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   110.205] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 28 19:11:57 2013
[   112.366] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   112.938] (==) No Layout section.  Using the first Screen section.
[   112.938] (==) No screen section available. Using defaults.
[   112.938] (**) |-->Screen "Default Screen Section" (0)
[   112.938] (**) |   |-->Monitor "<default monitor>"
[   112.944] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   112.944] (==) Automatically adding devices
[   112.944] (==) Automatically enabling devices
[   113.302] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   113.303] 	Entry deleted from font path.
[   113.311] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[   113.312] 	Entry deleted from font path.
[   113.312] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   113.312] 	Entry deleted from font path.
[   113.312] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[   113.312] (==) ModulePath set to "/usr/lib/xorg/modules"
[   113.312] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   113.312] (II) Loader magic: 0xb77a25a0
[   113.312] (II) Module ABI versions:
[   113.312] 	X.Org ANSI C Emulation: 0.4
[   113.312] 	X.Org Video Driver: 12.1
[   113.312] 	X.Org XInput driver : 16.0
[   113.312] 	X.Org Server Extension : 6.0
[   113.313] (--) PCI:*(0:1:0:0) 10de:02e2:107d:20af rev 162, Mem @ 0xce000000/16777216, 0xb0000000/268435456, 0xcd000000/16777216, BIOS @ 0x????????/131072
[   113.316] (II) Open ACPI successful (/var/run/acpid.socket)
[   113.316] (II) LoadModule: "extmod"
[   113.445] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   113.990] (II) Module extmod: vendor="X.Org Foundation"
[   113.990] 	compiled for 1.12.4, module version = 1.0.0
[   113.990] 	Module class: X.Org Server Extension
[   113.990] 	ABI class: X.Org Server Extension, version 6.0
[   113.990] (II) Loading extension SELinux
[   113.990] (II) Loading extension MIT-SCREEN-SAVER
[   113.990] (II) Loading extension XFree86-VidModeExtension
[   113.990] (II) Loading extension XFree86-DGA
[   113.990] (II) Loading extension DPMS
[   113.990] (II) Loading extension XVideo
[   113.990] (II) Loading extension XVideo-MotionCompensation
[   113.990] (II) Loading extension X-Resource
[   113.990] (II) LoadModule: "dbe"
[   113.990] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   114.555] (II) Module dbe: vendor="X.Org Foundation"
[   114.556] 	compiled for 1.12.4, module version = 1.0.0
[   114.556] 	Module class: X.Org Server Extension
[   114.556] 	ABI class: X.Org Server Extension, version 6.0
[   114.556] (II) Loading extension DOUBLE-BUFFER
[   114.556] (II) LoadModule: "glx"
[   114.556] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   115.647] (II) Module glx: vendor="X.Org Foundation"
[   115.649] 	compiled for 1.12.4, module version = 1.0.0
[   115.649] 	ABI class: X.Org Server Extension, version 6.0
[   115.650] (==) AIGLX enabled
[   115.770] (II) Loading extension GLX
[   115.770] (II) LoadModule: "record"
[   115.770] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   115.905] (II) Module record: vendor="X.Org Foundation"
[   115.905] 	compiled for 1.12.4, module version = 1.13.0
[   115.905] 	Module class: X.Org Server Extension
[   115.905] 	ABI class: X.Org Server Extension, version 6.0
[   115.905] (II) Loading extension RECORD
[   115.905] (II) LoadModule: "dri"
[   115.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   116.600] (II) Module dri: vendor="X.Org Foundation"
[   116.600] 	compiled for 1.12.4, module version = 1.0.0
[   116.600] 	ABI class: X.Org Server Extension, version 6.0
[   116.600] (II) Loading extension XFree86-DRI
[   116.600] (II) LoadModule: "dri2"
[   116.601] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   116.606] (II) Module dri2: vendor="X.Org Foundation"
[   116.606] 	compiled for 1.12.4, module version = 1.2.0
[   116.606] 	ABI class: X.Org Server Extension, version 6.0
[   116.607] (II) Loading extension DRI2
[   116.607] (==) Matched nouveau as autoconfigured driver 0
[   116.607] (==) Matched nv as autoconfigured driver 1
[   116.607] (==) Matched vesa as autoconfigured driver 2
[   116.607] (==) Matched fbdev as autoconfigured driver 3
[   116.607] (==) Assigned the driver to the xf86ConfigLayout
[   116.607] (II) LoadModule: "nouveau"
[   116.612] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   117.368] (II) Module nouveau: vendor="X.Org Foundation"
[   117.368] 	compiled for 1.12.4, module version = 1.0.1
[   117.368] 	Module class: X.Org Video Driver
[   117.368] 	ABI class: X.Org Video Driver, version 12.1
[   117.368] (II) LoadModule: "nv"
[   117.375] (WW) Warning, couldn't open module nv
[   117.375] (II) UnloadModule: "nv"
[   117.375] (II) Unloading nv
[   117.375] (EE) Failed to load module "nv" (module does not exist, 0)
[   117.375] (II) LoadModule: "vesa"
[   117.381] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   118.302] (II) Module vesa: vendor="X.Org Foundation"
[   118.302] 	compiled for 1.12.1, module version = 2.3.1
[   118.302] 	Module class: X.Org Video Driver
[   118.302] 	ABI class: X.Org Video Driver, version 12.0
[   118.302] (II) LoadModule: "fbdev"
[   118.303] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   119.275] (II) Module fbdev: vendor="X.Org Foundation"
[   119.275] 	compiled for 1.12.1, module version = 0.4.2
[   119.275] 	ABI class: X.Org Video Driver, version 12.0
[   119.275] (II) NOUVEAU driver Date:   Fri Jul 6 16:23:50 2012 +1000
[   119.275] (II) NOUVEAU driver for NVIDIA chipset families :
[   119.276] 	RIVA TNT        (NV04)
[   119.276] 	RIVA TNT2       (NV05)
[   119.276] 	GeForce 256     (NV10)
[   119.276] 	GeForce 2       (NV11, NV15)
[   119.276] 	GeForce 4MX     (NV17, NV18)
[   119.276] 	GeForce 3       (NV20)
[   119.276] 	GeForce 4Ti     (NV25, NV28)
[   119.276] 	GeForce FX      (NV3x)
[   119.276] 	GeForce 6       (NV4x)
[   119.276] 	GeForce 7       (G7x)
[   119.276] 	GeForce 8       (G8x)
[   119.276] 	GeForce GTX 200 (NVA0)
[   119.276] 	GeForce GTX 400 (NVC0)
[   119.276] (II) VESA: driver for VESA chipsets: vesa
[   119.276] (II) FBDEV: driver for framebuffer: fbdev
[   119.276] (++) using VT number 8

[   119.282] drmOpenDevice: node name is /dev/dri/card0
[   119.283] drmOpenDevice: open result is 8, (OK)
[   119.283] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[   119.283] drmOpenDevice: node name is /dev/dri/card0
[   119.283] drmOpenDevice: open result is 8, (OK)
[   119.283] drmOpenByBusid: drmOpenMinor returns 8
[   119.283] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[   119.283] (II) [drm] nouveau interface version: 1.1.0
[   119.283] (WW) Falling back to old probe method for vesa
[   119.283] (WW) Falling back to old probe method for fbdev
[   119.283] (II) Loading sub module "fbdevhw"
[   119.283] (II) LoadModule: "fbdevhw"
[   119.283] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   119.733] (II) Module fbdevhw: vendor="X.Org Foundation"
[   119.733] 	compiled for 1.12.4, module version = 0.0.2
[   119.733] 	ABI class: X.Org Video Driver, version 12.1
[   119.733] (II) Loading sub module "dri"
[   119.733] (II) LoadModule: "dri"
[   119.733] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   119.733] (II) Module dri: vendor="X.Org Foundation"
[   119.733] 	compiled for 1.12.4, module version = 1.0.0
[   119.733] 	ABI class: X.Org Server Extension, version 6.0
[   119.733] (II) NOUVEAU(0): Loaded DRI module
[   119.733] drmOpenDevice: node name is /dev/dri/card0
[   119.734] drmOpenDevice: open result is 9, (OK)
[   119.734] drmOpenDevice: node name is /dev/dri/card0
[   119.734] drmOpenDevice: open result is 9, (OK)
[   119.734] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[   119.734] drmOpenDevice: node name is /dev/dri/card0
[   119.734] drmOpenDevice: open result is 9, (OK)
[   119.734] drmOpenByBusid: drmOpenMinor returns 9
[   119.734] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[   119.734] (II) [drm] DRM interface version 1.4
[   119.734] (II) [drm] DRM open master succeeded.
[   119.734] (--) NOUVEAU(0): Chipset: "NVIDIA NV4b"
[   119.734] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   119.734] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[   119.734] (==) NOUVEAU(0): RGB weight 888
[   119.734] (==) NOUVEAU(0): Default visual is TrueColor
[   119.734] (==) NOUVEAU(0): Using HW cursor
[   119.734] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[   119.734] (==) NOUVEAU(0): Page flipping enabled
[   119.734] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[   119.800] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[   119.832] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[   119.888] (II) NOUVEAU(0): Output TV-1 has no monitor section
[   119.948] (II) NOUVEAU(0): EDID for output DVI-I-1
[   119.980] (II) NOUVEAU(0): EDID for output VGA-1
[   119.980] (II) NOUVEAU(0): Manufacturer: ACR  Model: 1a6  Serial#: 292613006
[   119.980] (II) NOUVEAU(0): Year: 2011  Week: 17
[   119.980] (II) NOUVEAU(0): EDID Version: 1.3
[   119.980] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[   119.980] (II) NOUVEAU(0): Sync:  Separate
[   119.980] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[   119.980] (II) NOUVEAU(0): Gamma: 2.20
[   119.980] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[   119.980] (II) NOUVEAU(0): Default color space is primary color space
[   119.980] (II) NOUVEAU(0): First detailed timing is preferred mode
[   119.980] (II) NOUVEAU(0): redX: 0.646 redY: 0.343   greenX: 0.321 greenY: 0.612
[   119.980] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.066   whiteX: 0.313 whiteY: 0.329
[   119.980] (II) NOUVEAU(0): Supported established timings:
[   119.980] (II) NOUVEAU(0): 720x400@70Hz
[   119.980] (II) NOUVEAU(0): 640x480@60Hz
[   119.980] (II) NOUVEAU(0): 640x480@67Hz
[   119.980] (II) NOUVEAU(0): 640x480@72Hz
[   119.980] (II) NOUVEAU(0): 640x480@75Hz
[   119.980] (II) NOUVEAU(0): 800x600@56Hz
[   119.980] (II) NOUVEAU(0): 800x600@60Hz
[   119.980] (II) NOUVEAU(0): 800x600@72Hz
[   119.980] (II) NOUVEAU(0): 800x600@75Hz
[   119.980] (II) NOUVEAU(0): 832x624@75Hz
[   119.980] (II) NOUVEAU(0): 1024x768@60Hz
[   119.980] (II) NOUVEAU(0): 1024x768@70Hz
[   119.980] (II) NOUVEAU(0): 1024x768@75Hz
[   119.980] (II) NOUVEAU(0): 1280x1024@75Hz
[   119.980] (II) NOUVEAU(0): 1152x864@75Hz
[   119.980] (II) NOUVEAU(0): Manufacturer's mask: 0
[   119.980] (II) NOUVEAU(0): Supported standard timings:
[   119.980] (II) NOUVEAU(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   119.980] (II) NOUVEAU(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   119.980] (II) NOUVEAU(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   119.980] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   119.980] (II) NOUVEAU(0): #4: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   119.980] (II) NOUVEAU(0): #5: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[   119.980] (II) NOUVEAU(0): Supported detailed timing:
[   119.980] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[   119.980] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   119.980] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   119.980] (II) NOUVEAU(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 165 MHz
[   119.981] (II) NOUVEAU(0): Serial No: LNZ080214204
[   119.981] (II) NOUVEAU(0): Monitor name: Acer S231HL
[   119.981] (II) NOUVEAU(0): EDID (in hex):
[   119.981] (II) NOUVEAU(0): 	00ffffffffffff000472a6018eeb7011
[   119.981] (II) NOUVEAU(0): 	1115010368331d782e77c5a557529c25
[   119.981] (II) NOUVEAU(0): 	115054bfef8081c08140714f81808100
[   119.981] (II) NOUVEAU(0): 	d1c001010101023a801871382d40582c
[   119.981] (II) NOUVEAU(0): 	4500fe1f1100001e000000fd00374b1e
[   119.981] (II) NOUVEAU(0): 	5010000a202020202020000000ff004c
[   119.981] (II) NOUVEAU(0): 	4e5a3038303231343230340a000000fc
[   119.981] (II) NOUVEAU(0): 	00416365722053323331484c0a20009a
[   119.981] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[   119.981] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   119.981] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[   119.981] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   119.981] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   120.036] (II) NOUVEAU(0): EDID for output TV-1
[   120.036] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[   120.036] (II) NOUVEAU(0): Output VGA-1 connected
[   120.036] (II) NOUVEAU(0): Output TV-1 disconnected
[   120.036] (II) NOUVEAU(0): Using exact sizes for initial modes
[   120.036] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080
[   120.036] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   120.036] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[   120.036] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   120.036] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   120.036] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   120.036] (**) NOUVEAU(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   120.036] (**) NOUVEAU(0):  Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[   120.036] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   120.036] (**) NOUVEAU(0):  Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[   120.036] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   120.036] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   120.036] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[   120.036] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[   120.037] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[   120.037] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[   120.037] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[   120.037] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[   120.037] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[   120.037] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[   120.037] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[   120.037] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[   120.037] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   120.037] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[   120.037] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   120.037] (++) NOUVEAU(0): DPI set to (96, 96)
[   120.037] (II) Loading sub module "fb"
[   120.037] (II) LoadModule: "fb"
[   120.037] (II) Loading /usr/lib/xorg/modules/libfb.so
[   120.880] (II) Module fb: vendor="X.Org Foundation"
[   120.880] 	compiled for 1.12.4, module version = 1.0.0
[   120.880] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   120.880] (II) Loading sub module "exa"
[   120.880] (II) LoadModule: "exa"
[   120.881] (II) Loading /usr/lib/xorg/modules/libexa.so
[   121.930] (II) Module exa: vendor="X.Org Foundation"
[   121.930] 	compiled for 1.12.4, module version = 2.5.0
[   121.930] 	ABI class: X.Org Video Driver, version 12.1
[   121.930] (II) Loading sub module "shadowfb"
[   121.930] (II) LoadModule: "shadowfb"
[   121.931] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[   122.253] (II) Module shadowfb: vendor="X.Org Foundation"
[   122.253] 	compiled for 1.12.4, module version = 1.0.0
[   122.253] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   122.253] (II) UnloadModule: "vesa"
[   122.253] (II) Unloading vesa
[   122.253] (II) UnloadModule: "fbdev"
[   122.253] (II) Unloading fbdev
[   122.254] (II) UnloadSubModule: "fbdevhw"
[   122.254] (II) Unloading fbdevhw
[   122.254] (--) Depth 24 pixmap format is 32 bpp
[   122.254] (II) NOUVEAU(0): Opened GPU channel 0
[   122.263] (II) NOUVEAU(0): [DRI2] Setup complete
[   122.263] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[   122.263] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[   124.194] (II) EXA(0): Driver allocated offscreen pixmaps
[   124.194] (II) EXA(0): Driver registered support for the following operations:
[   124.194] (II)         Solid
[   124.194] (II)         Copy
[   124.194] (II)         Composite (RENDER acceleration)
[   124.194] (II)         UploadToScreen
[   124.194] (II)         DownloadFromScreen
[   124.194] (==) NOUVEAU(0): Backing store disabled
[   124.195] (==) NOUVEAU(0): Silken mouse enabled
[   124.195] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[   124.195] (II) NOUVEAU(0): [XvMC] Extension initialized.
[   124.195] (==) NOUVEAU(0): DPMS enabled
[   124.195] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   124.208] (--) RandR disabled
[   124.208] (II) Initializing built-in extension Generic Event Extension
[   124.208] (II) Initializing built-in extension SHAPE
[   124.208] (II) Initializing built-in extension MIT-SHM
[   124.208] (II) Initializing built-in extension XInputExtension
[   124.208] (II) Initializing built-in extension XTEST
[   124.208] (II) Initializing built-in extension BIG-REQUESTS
[   124.208] (II) Initializing built-in extension SYNC
[   124.208] (II) Initializing built-in extension XKEYBOARD
[   124.208] (II) Initializing built-in extension XC-MISC
[   124.208] (II) Initializing built-in extension SECURITY
[   124.208] (II) Initializing built-in extension XINERAMA
[   124.208] (II) Initializing built-in extension XFIXES
[   124.208] (II) Initializing built-in extension RENDER
[   124.208] (II) Initializing built-in extension RANDR
[   124.208] (II) Initializing built-in extension COMPOSITE
[   124.208] (II) Initializing built-in extension DAMAGE
[   124.208] (II) SELinux: Disabled on system
[   152.478] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   152.478] (II) AIGLX: enabled GLX_INTEL_swap_event
[   152.478] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   152.478] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   152.479] (II) AIGLX: Loaded and initialized nouveau
[   152.479] (II) GLX: Initialized DRI2 GL provider for screen 0
[   152.482] (II) NOUVEAU(0): NVEnterVT is called.
[   152.483] (II) NOUVEAU(0): Setting screen physical size to 507 x 285
[   152.483] resize called 1920 1080
[   169.466] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   169.466] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   169.466] (II) LoadModule: "evdev"
[   169.466] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   170.320] (II) Module evdev: vendor="X.Org Foundation"
[   170.320] 	compiled for 1.12.1, module version = 2.7.0
[   170.320] 	Module class: X.Org XInput Driver
[   170.320] 	ABI class: X.Org XInput driver, version 16.0
[   170.320] (II) Using input driver 'evdev' for 'Power Button'
[   170.320] (**) Power Button: always reports core events
[   170.320] (**) evdev: Power Button: Device: "/dev/input/event2"
[   170.320] (--) evdev: Power Button: Vendor 0 Product 0x1
[   170.320] (--) evdev: Power Button: Found keys
[   170.320] (II) evdev: Power Button: Configuring as keyboard
[   170.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   170.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   170.320] (**) Option "xkb_rules" "evdev"
[   170.320] (**) Option "xkb_model" "pc105"
[   170.320] (**) Option "xkb_layout" "us"
[   170.322] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   170.322] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   170.322] (II) Using input driver 'evdev' for 'Sleep Button'
[   170.322] (**) Sleep Button: always reports core events
[   170.322] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   170.322] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   170.322] (--) evdev: Sleep Button: Found keys
[   170.322] (II) evdev: Sleep Button: Configuring as keyboard
[   170.322] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[   170.322] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[   170.322] (**) Option "xkb_rules" "evdev"
[   170.322] (**) Option "xkb_model" "pc105"
[   170.322] (**) Option "xkb_layout" "us"
[   170.332] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   170.332] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   170.332] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   170.332] (**) AT Translated Set 2 keyboard: always reports core events
[   170.332] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   170.332] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   170.332] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   170.332] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   170.332] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   170.332] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[   170.332] (**) Option "xkb_rules" "evdev"
[   170.332] (**) Option "xkb_model" "pc105"
[   170.332] (**) Option "xkb_layout" "us"
[   170.334] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
[   170.334] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[   170.334] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[   170.334] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[   170.334] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
[   170.334] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[   170.334] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[   170.334] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[   170.334] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[   170.334] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[   170.334] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[   170.334] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[   170.334] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[   170.334] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   170.334] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[   170.334] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
[   170.334] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[   170.335] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[   170.335] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[   170.335] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[   170.335] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[   170.335] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[   170.337] (II) No input driver specified, ignoring this device.
[   170.337] (II) This device may have been added with another device file.
[   170.337] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[   170.338] (II) No input driver specified, ignoring this device.
[   170.338] (II) This device may have been added with another device file.
[   170.344] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event5)
[   170.344] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[   170.344] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[   170.344] (**) ACPI Virtual Keyboard Device: always reports core events
[   170.344] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event5"
[   170.344] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[   170.344] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[   170.344] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[   170.344] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[   170.344] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 10)
[   170.344] (**) Option "xkb_rules" "evdev"
[   170.344] (**) Option "xkb_model" "pc105"
[   170.345] (**) Option "xkb_layout" "us"
[   170.535] (II) evdev: Power Button: Close
[   170.535] (II) UnloadModule: "evdev"
[   170.535] (II) evdev: Sleep Button: Close
[   170.535] (II) UnloadModule: "evdev"
[   170.535] (II) evdev: AT Translated Set 2 keyboard: Close
[   170.535] (II) UnloadModule: "evdev"
[   170.535] (II) evdev: ImPS/2 Logitech Wheel Mouse: Close
[   170.535] (II) UnloadModule: "evdev"
[   170.535] (II) evdev: ACPI Virtual Keyboard Device: Close
[   170.543] (II) UnloadModule: "evdev"
[   170.546] (II) NOUVEAU(0): NVLeaveVT is called.
[   170.546] (II) NOUVEAU(0): Closed GPU channel 0
[   170.577] Server terminated successfully (0). Closing log file.
M11 Xorg.0.log nvidia driver:

Code: Select all

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
Current Operating System: Linux mepis1 2.6.36-1-mepis-smp #1 SMP Thu Mar 31 17:07:18 CDT 2011 i686
Kernel command line: root=/dev/sda8 nomce quiet splash vga=788
Build Date: 17 December 2013  08:26:59PM
xorg-server 2:1.7.7-18 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.21.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 28 20:42:09 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81eccc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:02e2:107d:20af nVidia Corporation G73 [GeForce 7300 GT] rev 162, Mem @ 0xce000000/16777216, 0xb0000000/268435456, 0xcd000000/16777216, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  260.19.21  Thu Nov  4 20:52:05 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  260.19.21  Thu Nov  4 20:26:43 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Dec 28 20:42:12 NVIDIA(0): Enabling RENDER acceleration
(II) Dec 28 20:42:12 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Dec 28 20:42:12 NVIDIA(0):     enabled.
(II) Dec 28 20:42:13 NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0)
(--) Dec 28 20:42:13 NVIDIA(0): Memory: 262144 kBytes
(--) Dec 28 20:42:13 NVIDIA(0): VideoBIOS: 05.73.22.61.68
(II) Dec 28 20:42:13 NVIDIA(0): Detected AGP rate: 4X
(--) Dec 28 20:42:13 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Dec 28 20:42:13 NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0
(--) Dec 28 20:42:13 NVIDIA(0):     Acer S231HL (CRT-1)
(--) Dec 28 20:42:13 NVIDIA(0): Acer S231HL (CRT-1): 400.0 MHz maximum pixel clock
(II) Dec 28 20:42:13 NVIDIA(0): Assigned Display Device: CRT-1
(==) Dec 28 20:42:13 NVIDIA(0): 
(==) Dec 28 20:42:13 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Dec 28 20:42:13 NVIDIA(0):     will be used as the requested mode.
(==) Dec 28 20:42:13 NVIDIA(0): 
(II) Dec 28 20:42:13 NVIDIA(0): Validated modes:
(II) Dec 28 20:42:13 NVIDIA(0):     "nvidia-auto-select"
(II) Dec 28 20:42:13 NVIDIA(0): Virtual screen size determined to be 1920 x 1080
(++) Dec 28 20:42:13 NVIDIA(0): DPI set to (96, 96); computed from -dpi X commandline option
(==) Dec 28 20:42:13 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Dec 28 20:42:13 NVIDIA(0): Initialized AGP GART.
(II) Dec 28 20:42:13 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Dec 28 20:42:13 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Dec 28 20:42:13 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Sleep Button (/dev/input/event1)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event1"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
(**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Found relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event5)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event5"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
Top
User avatar
lucky9
Posts: 475
Joined: Wed Jul 12, 2006 5:54 am

Re: M12 11.9.92

#205 Post by lucky9 »

In text mode you would use cp /var/log /home to place a copy in your /home directory. Note the space between log and /. You may need to be root. I'm not sure.
Yes, even I am dishonest. Not in many ways, but in some. Forty-one, I think it is.
--Mark Twain
Top
User avatar
kmathern
Developer
Posts: 2519
Joined: Wed Jul 12, 2006 2:26 pm

Re: M12 11.9.92

#206 Post by kmathern »

GregB wrote:Here are the Xorg.0.log files:

M12 Xorg.0.log using default boot option:

Code: Select all

<snip>
[   120.036] (II) NOUVEAU(0): EDID for output TV-1
[   120.036] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[   120.036] (II) NOUVEAU(0): Output VGA-1 connected
[   120.036] (II) NOUVEAU(0): Output TV-1 disconnected
[   120.036] (II) NOUVEAU(0): Using exact sizes for initial modes
[   120.036] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080
[   120.036] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   120.036] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[   120.036] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
</snip>
<snip>
[   124.208] (II) SELinux: Disabled on system
[   152.478] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   152.478] (II) AIGLX: enabled GLX_INTEL_swap_event
[   152.478] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   152.478] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   152.479] (II) AIGLX: Loaded and initialized nouveau
[   152.479] (II) GLX: Initialized DRI2 GL provider for screen 0
[   152.482] (II) NOUVEAU(0): NVEnterVT is called.
[   152.483] (II) NOUVEAU(0): Setting screen physical size to 507 x 285
[   152.483] resize called 1920 1080
[   169.466] (II) config/udev: Adding input device Power Button (/dev/input/event2)
</snip>
It looks like X is starting okay with the nouveau driver, I don't see any errors (EE) or warnings (WW) related to it. There is a 28 second gap in the timestamps (124.208 -> 152.478) that I'm not sure of. There's another 17 second gap a few timestamps later. When I use the nouveau driver on my system the first AIGLX line has a timestamp that's only about .4 seconds after the SELinux line.

It seems like almost everyone doesn't need to do this, but when I use the nouveau driver I need to add a video= cheat, otherwise I'll get a "out of range" message floating around the screen. What I use is video=VGA-1:e, which is the minimal amount of options I need to use for that cheat to work. The 'VGA-1' is the output that the Xorg.0.log says is connected {my Xorg.0.log says it's using the VGA-1 output -- as does your's} , the ':e' forces the display to be enabled. Other options can be added to the video= cheat including xres, yres, vertical refresh rate, etc. More details on the video= options can be found here: http://cgit.freedesktop.org/nouveau/lin ... modedb.txt. To start with you might try the following video= cheats:

Code: Select all

video=VGA-1:e

Code: Select all

video=VGA-1:D

Code: Select all

video=VGA-1:1920x1080@60e

Code: Select all

video=VGA-1:1920x1080@60D

Code: Select all

video=VGA-1:1920x1080R@60D
edit:
One other thing you might try is removing the "splash" cheatcode from the kernel command line just in case the plymouth splash is causing the problem.
{I'm assuming a LiveUSB flash drive created with Unetbootin will let you do that, and also for the video= cheat}.

Also try the "Safe Mode" boot menu option if you haven't already (if the Unetbootin LiveUSB offers a Safe Mode option). The Safe Mode boot option includes the "nouveau.modeset=0" cheat which should force the vesa driver to be used. The Safe Mode boot option doesn't include the nomodeset cheat, but I don't think you need it anyway (you can add it if you want to).
Top
User avatar
GregB
Posts: 11
Joined: Mon Mar 02, 2009 8:58 pm

Re: M12 11.9.92

#207 Post by GregB »

I've been trying your suggestions, including the Unetbootin options. After trying a lot of different video cheatcodes and removing the splash, the screen is still staying blank. I tried to run sgfxi and it ran out of memory before finishing.
Top
User avatar
lucky9
Posts: 475
Joined: Wed Jul 12, 2006 5:54 am

Re: M12 11.9.92

#208 Post by lucky9 »

How big is the FlashDrive that you're using? sgfxi is a very small script and a downloaded driver from nvidia is less than 60 MB. There should not be a lot of memory needed to run sgfxi.
Yes, even I am dishonest. Not in many ways, but in some. Forty-one, I think it is.
--Mark Twain
Top
User avatar
GregB
Posts: 11
Joined: Mon Mar 02, 2009 8:58 pm

Re: M12 11.9.92

#209 Post by GregB »

The flash drive is 4GB. I tried running sgfxi again with the same results. It starts installing the driver and after a while it says that it is out of memory and starts to unload a lot of different processes.
Top
User avatar
kmathern
Developer
Posts: 2519
Joined: Wed Jul 12, 2006 2:26 pm

Re: M12 11.9.92

#210 Post by kmathern »

I think the Live session runs in RAM using aufs. How much RAM does your system have? The M12 Live session also doesn't automatically make use of a swap partition (if one's available).

I have installed the 173xx series legacy nvidia driver in M12 Live sessions without any problems (i.e. - running out of memory). My system only has 1GB of RAM. The 173xx legacy driver is approx. 15MB, which I think is quite a bit smaller than the latest versions of the nvidia driver.
Top
Post Reply

Return to “General”