ssh-conduit fs mounts to wrong local destination

Message

#1 Post by **m_pav** » Thu Jun 27, 2024 9:39 pm

When mounting a remote folder located on my my ManCave PC to my Laptop, ssh-conduit used to mount the remote folder into ~/Mancave but for some unknown reason, it has changed to creating a mount point onto my Desktop instead of using the previously used ~/ManCave mount point it used to mount the remote directory to.

Furthermore, when I go to select a mount point to disconnect, it sees the Desktop mount point but fails to disconnect it.

I can't seem to find a config that allows me to change the default local mountpoint and I have to use Thunar to umount the remote folder, which requires that I stop the FS umounter in the notification area, else I will have multiples of it loaded each time I remount the remote folder.

Anybody have experience with this type of thing where they've found a solution?

Both machines have an almost identical software load from the same Live-USB that I update from time to time.

QSI from Laptop

Code: Select all

Snapshot created on: 20240422_1653
System:
  Kernel: 6.8.9-5-liquorix-amd64 [6.8-14~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable BOOT_IMAGE=/boot/vmlinuz-6.8.9-5-liquorix-amd64 root=UUID=<filter> ro
    quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.3_ahs_x64 Libretto January 21  2024 base: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: Laptop System: LENOVO product: 20FHCTO1WW v: ThinkPad T560 serial: <superuser required>
    Chassis: type: 10 serial: <superuser required>
  Mobo: LENOVO model: 20FHCTO1WW v: SDK0J40697 WIN serial: <superuser required> UEFI: LENOVO
    v: N1KET58W (1.45 ) date: 12/12/2022
Battery:
  ID-1: BAT0 charge: 38.2 Wh (97.0%) condition: 39.4/44.5 Wh (88.5%) volts: 12.3 min: 11.4
    model: SONY 45N1743 type: Li-poly serial: <filter> status: not charging
  ID-2: BAT1 charge: 51.0 Wh (87.6%) condition: 58.2/72.2 Wh (80.6%) volts: 11.9 min: 11.1
    model: SANYO 45N1125 type: Li-ion serial: <filter> status: discharging
CPU:
  Info: model: Intel Core i7-6600U bits: 64 type: MT MCP arch: Skylake gen: core 6 level: v3
    note: check built: 2015 process: Intel 14nm family: 6 model-id: 0x4E (78) stepping: 3
    microcode: 0xF0
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1100 min/max: 400/2701 boost: enabled scaling: driver: acpi-cpufreq
    governor: ondemand cores: 1: 1100 2: 1100 3: 1100 4: 1100 bogomips: 22399
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Vulnerable: No microcode
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional; RSB filling;
    PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort mitigation: TSX disabled
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Lenovo driver: i915 v: kernel arch: Gen-9
    process: Intel 14n built: 2015-16 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:1916 class-ID: 0300
  Device-2: Lite-On Integrated Camera type: USB driver: uvcvideo bus-ID: 1-8:6 chip-ID: 04ca:7058
    class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: intel
    dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 mapped: eDP1 model: LG Display 0x054f built: 2016 res: 1920x1080 hz: 60
    dpi: 143 gamma: 1.2 size: 340x190mm (13.39x7.48") diag: 395mm (15.5") ratio: 16:9
    modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel HD Graphics 520 (SKL GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel
    alternate: snd_soc_skl, snd_soc_avs, snd_sof_pci_intel_skl bus-ID: 00:1f.3 chip-ID: 8086:9d70
    class-ID: 0403
  API: ALSA v: k6.8.9-5-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I219-LM vendor: Lenovo driver: e1000e v: kernel port: N/A
    bus-ID: 00:1f.6 chip-ID: 8086:156f class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 04:00.0 chip-ID: 8086:24f3 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  Device-3: Huawei ME906s LTE M.2 Module type: USB driver: cdc_ether,option,option1 bus-ID: 1-2:2
    chip-ID: 12d1:15c1 class-ID: 0a06 serial: <filter>
  IF: wwan0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-7:5
    chip-ID: 8087:0a2b class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 100 hci-v: 4.2 rev: 100
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 1.82 TiB used: 789.44 GiB (42.4%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 2TB size: 1.82 TiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 4B6Q scheme: GPT
Partition:
  ID-1: / raw-size: 20 GiB size: 19.52 GiB (97.59%) used: 11.15 GiB (57.1%) fs: ext4 dev: /dev/sda5
    maj-min: 8:5
  ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 29.9 MiB (11.7%) fs: vfat
    dev: /dev/sda2 maj-min: 8:2
  ID-3: /home raw-size: 1.29 TiB size: 1.27 TiB (98.35%) used: 730.01 GiB (56.2%) fs: ext4
    dev: /dev/dm-1 maj-min: 253:1 mapped: sda6_crypt
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 5.84 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/dm-0
    maj-min: 253:0 mapped: sda8_crypt
Sensors:
  System Temperatures: cpu: 32.0 C pch: 30.5 C mobo: N/A
  Fan Speeds (RPM): fan-1: 0
Repos:
  Packages: 2462 pm: dpkg pkgs: 2455 libs: 1304 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 7
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mx.debian.nz/mx/repo/ bookworm main non-free
    2: deb http://mx.debian.nz/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/spotify.list
    1: deb http://repository.spotify.com stable non-free
Info:
  Processes: 308 Uptime: 54m wakeups: 3 Memory: 15.48 GiB used: 1.54 GiB (9.9%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

QSI from ManCave PC

Code: Select all

Snapshot created on: 20240314_1414
System:
  Kernel: 6.8.9-5-liquorix-amd64 [6.8-14~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable BOOT_IMAGE=/boot/vmlinuz-6.8.9-5-liquorix-amd64 root=UUID=<filter> ro
    quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.3_ahs_x64 Libretto January 21  2024 base: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: Desktop System: Gigabyte product: B550M DS3H AC v: -CF serial: <superuser required>
  Mobo: Gigabyte model: B550M DS3H AC serial: <superuser required> UEFI: American Megatrends LLC.
    v: FD date: 03/22/2024
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard serial: <filter>
    charge: 50% (should be ignored) rechargeable: yes status: N/A
CPU:
  Info: model: AMD Ryzen 5 5600G with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3 gen: 4
    level: v3 note: check built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80)
    stepping: 0 microcode: 0xA50000F
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache: L1: 384 KiB
    desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 1072 high: 4442 min/max: 400/4464 scaling: driver: amd-pstate-epp
    governor: performance cores: 1: 400 2: 400 3: 4442 4: 400 5: 4427 6: 400 7: 400 8: 400 9: 400
    10: 400 11: 400 12: 400 bogomips: 93423
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow mitigation: Safe RET
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: always-on; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Cezanne [Radeon Vega Series / Radeon Mobile Series] vendor: Gigabyte driver: amdgpu
    v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s
    lanes: 16 link-max: gen: 4 speed: 16 GT/s ports: active: HDMI-A-2 empty: DP-1,HDMI-A-1
    bus-ID: 06:00.0 chip-ID: 1002:1638 class-ID: 0300 temp: 26.0 C
  Device-2: Logitech HD Webcam C910 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-1:2
    chip-ID: 046d:0821 class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: amdgpu
    unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.48x10.91") s-diag: 523mm (20.6")
  Monitor-1: HDMI-A-2 mapped: HDMI-A-1 model: Lenovo LT2252p Wide serial: <filter> built: 2012
    res: 1680x1050 hz: 60 dpi: 90 gamma: 1.2 size: 474x296mm (18.66x11.65") diag: 559mm (22")
    ratio: 16:10 modes: max: 1680x1050 min: 720x400
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: AMD Radeon Graphics (renoir LLVM 15.0.6 DRM
    3.57 6.8.9-5-liquorix-amd64) direct-render: Yes
Audio:
  Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel v: kernel pcie:
    bus-ID: 1-1:2 chip-ID: 046d:0821 gen: 3 class-ID: 0e02 speed: 8 GT/s lanes: 16 serial: <filter>
    link-max: gen: 4 speed: 16 GT/s bus-ID: 06:00.1 chip-ID: 1002:1637 class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel pcie:
    gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 06:00.6 chip-ID: 1022:15e3
    class-ID: 0403
  Device-3: Logitech HD Webcam C910 type: USB driver: snd-usb-audio,uvcvideo
  API: ALSA v: k6.8.9-5-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter vendor: AzureWave
    driver: rtw_8821ce v: N/A modules: rtw88_8821ce,wl,rtl8821ce pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: e000 bus-ID: 03:00.0 chip-ID: 10ec:c821 class-ID: 0280
  IF: wlan0 state: down mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte driver: r8169
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 04:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
    bus-ID: 1-8:6 chip-ID: 0a12:0001 class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
    sub-v: 22bb hci-v: 4.0 rev: 22bb
  Info: acl-mtu: 310:10 sco-mtu: 64:8 link-policy: rswitch hold sniff park
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
  Device-2: IMC Networks Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-9:7
    chip-ID: 13d3:3558 class-ID: e001 serial: <filter>
  Report: ID: hci1 rfk-id: 2 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2 sub-v: 8821
    hci-v: 4.2 rev: c
  Info: acl-mtu: 820:8 sco-mtu: 255:12 link-policy: rswitch hold sniff park
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 3.43 TiB used: 637.54 GiB (18.2%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: A-Data model: LEGEND 850 size: 476.94 GiB block-size:
    physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter> rev: V1223B0
    temp: 22.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Netac model: SSD 256GB size: 238.47 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 14B2 scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000NC001-1DY162 size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
    rev: CN01 scheme: MBR
  ID-4: /dev/sdc maj-min: 8:32 vendor: Western Digital model: WD2002FAEX-007BA0 size: 1.82 TiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: N/A serial: <filter> rev: 1D05
    scheme: GPT
Partition:
  ID-1: / raw-size: 27.34 GiB size: 26.75 GiB (97.81%) used: 9.1 GiB (34.0%) fs: ext4
    dev: /dev/nvme0n1p5 maj-min: 259:5
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 25.7 MiB (26.8%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 226.05 GiB size: 221.44 GiB (97.96%) used: 45.3 GiB (20.5%) fs: ext4
    dev: /dev/dm-0 maj-min: 253:0 mapped: luks-<filter>
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 7.8 GiB used: 374 MiB (4.7%) priority: -2 dev: /dev/dm-1
    maj-min: 253:1 mapped: luks-<filter>
Sensors:
  System Temperatures: cpu: 30.9 C mobo: 23.0 C gpu: amdgpu temp: 25.0 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2446 libs: 1303 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mx.debian.nz/mx/repo/ bookworm main non-free
    2: deb http://mx.debian.nz/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/spotify.list
    1: deb http://repository.spotify.com stable non-free
Info:
  Processes: 424 Uptime: 15d 22h 26m wakeups: 166 Memory: 15 GiB used: 1.9 GiB (12.6%)
  Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0
  alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

#2 Post by **dolphin_oracle** » Thu Jun 27, 2024 10:51 pm

its been a while, but I think profiles are stored under .config/ssh-conduit.

#3 Post by **m_pav** » Fri Jun 28, 2024 12:34 am

Thanks DO. That's where I've been looking and I couldn't find any particular setting for when a local folder is not specified. The help file for FS Connection states the following;

Code: Select all

  Local Folder
  The mount point name in this local system where the remote folder and files are shown.
  It must be unique. It is automatically created as a folder in the local home directory
  Spaces are allowed when the value is enclosed in quotes

OK, I've found the issue. The "local" directory is set from the point of program execution, not from the users homedir as it says in the help text.

I placed a launcher on my Desktop because I've been doing some testing on my laptop and going in and out of the remote folder quite a bit over the last 2 days. When I launch ssh-conduit from the Desktop launcher, the ~/Desktop folder becomes the default homedir location for the mount point to be used, whether a type 1 (manual) or type 2, (select a profile). When I umounted the remote folder, quit the Notification area icon and launched ssh-conduit from the Whisker menu, the remote folder is mounted as it states in the help text, in the root of my homedir.

As a test, I placed a launcher for ssh-conduit in my Downloads directory and sure enough, the ManCave folder was created and mounted therein.

All in all, it's a little odd, but good to know.

MX Linux Forum

ssh-conduit fs mounts to wrong local destination [Solved]

ssh-conduit fs mounts to wrong local destination

Re: ssh-conduit fs mounts to wrong local destination

Re: ssh-conduit fs mounts to wrong local destination [Solved]