Is there a way to change the popup notification's timeout?  [Solved]

Forum rules
Post Reply
Message
Author
User avatar
jefff1979
Posts: 3
Joined: Mon Nov 01, 2021 2:11 pm

Is there a way to change the popup notification's timeout?

#1 Post by jefff1979 »

A little backstory:

I used to use Mepis Linux back in 2007 because it was one of the only distros that had support for Nvidia video cards. Also, pretty much everything worked out of the box. I've tried MANY different Linux distros just messing around, but MX Linux seems to be the only one that can effectively replace a Windows machine, without me having to compromise on functionality. I've installed MX Linux on quite a few laptops I've nuked for people over the years, and they all love it as well.

Here's my system info:

Code: Select all

Snapshot created on: 20241231_2203
System:
  Kernel: 6.1.0-30-amd64 [6.1.124-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-30-amd64 root=UUID=<filter> ro quiet splash
    resume=UUID=<filter> resume_offset=27516928
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
    dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto September 15  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: TOSHIBA product: Satellite L50-A v: PSKLSU-01Q011
    serial: <superuser required>
  Mobo: TOSHIBA model: Portable PC v: MP serial: <superuser required> UEFI: Insyde v: 1.80
    date: 05/02/2014
Battery:
  ID-1: BAT0 charge: 21.7 Wh (100.0%) condition: 21.7/46.4 Wh (46.7%) volts: 14.4 min: 14.4
    model: PA5107U-1BRS type: Li-ion serial: <filter> status: full
CPU:
  Info: model: Intel Core i5-4200U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
    note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
    microcode: 0x26
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 1596 high: 1597 min/max: 800/2600 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 1596 2: 1596 3: 1597 4: 1597 bogomips: 18357
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: conditional; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Haswell-ULT Integrated Graphics vendor: Toshiba driver: i915 v: kernel
    arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: eDP-1 empty: DP-1,HDMI-A-1
    bus-ID: 00:02.0 chip-ID: 8086:0a16 class-ID: 0300
  Device-2: Chicony TOSHIBA Web Camera - HD type: USB driver: uvcvideo bus-ID: 1-1.5:4
    chip-ID: 04f2:b3e0 class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 362x204mm (14.25x8.03") s-diag: 416mm (16.36")
  Monitor-1: eDP-1 model: ChiMei InnoLux 0x15ab built: 2012 res: 1366x768 hz: 60 dpi: 101
    gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1366x768
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 4400 (HSW GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Haswell-ULT HD Audio vendor: Toshiba driver: snd_hda_intel v: kernel
    bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
  Device-2: Intel 8 Series HD Audio vendor: Toshiba 8 driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:9c20 class-ID: 0403
  API: ALSA v: k6.1.0-30-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: off with: 1: pipewire-pulse status: off 2: wireplumber
    status: off tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
  Device-1: Qualcomm Atheros QCA8171 Gigabit Ethernet vendor: Toshiba driver: alx v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 01:00.0 chip-ID: 1969:10a1 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Centrino Advanced-N 6235 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:088e class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Drives:
  Local Storage: total: 119.24 GiB used: 43.84 GiB (36.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: M4-CT128M4SSD2 size: 119.24 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 070H scheme: GPT
Partition:
  ID-1: / raw-size: 118.99 GiB size: 116.56 GiB (97.96%) used: 43.84 GiB (37.6%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 19.53 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 56.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: 2549 pm: dpkg pkgs: 2543 libs: 1358 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 6
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/airvpn-stable.list
    1: deb http://eddie.website/repository/apt stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirror.math.princeton.edu/pub/mxlinux/mx/repo/ bookworm main non-free
  Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
    1: deb [arch=amd64] https://repo.vivaldi.com/stable/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/extrepo_librewolf.sources
    1: deb [arch=amd64 arm64] https://repo.librewolf.net librewolf main
Info:
  Processes: 257 Uptime: 12h 33m wakeups: 4 Memory: 15.53 GiB used: 3.86 GiB (24.8%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Notifications will popup for various things, like connecting to Wi-Fi, or if you have a message in a messenger app, that sort of thing. Is there a way to change the timeout for notifications, so they don't disappear so quickly?
Top
User avatar
clampett
Posts: 136
Joined: Sun Oct 04, 2020 1:46 pm

Re: Is there a way to change the popup notification's timeout?  [Solved]

#2 Post by clampett »

Menu>Notifications > appearance
Top
User avatar
jefff1979
Posts: 3
Joined: Mon Nov 01, 2021 2:11 pm

Re: Is there a way to change the popup notification's timeout?

#3 Post by jefff1979 »

clampett wrote: ↑Sun Jan 19, 2025 9:50 am Menu>Notifications > appearance
Thanks!

I found it right after posting the question. 9_9

I found it in the "[xfce] Settings Editor" then I found it in the "[MX] Settings Manager" by searching for it. I think the key to the whole thing was searching for "Notification." I wasn't doing that before.

All these fancy GUI configuration options are throwing me off! :rofl:
Top
User avatar
CharlesV
Global Moderator
Posts: 7062
Joined: Sun Jul 07, 2019 5:11 pm

Re: Is there a way to change the popup notification's timeout?

#4 Post by CharlesV »

Glad you have it resolved, and good job finding the fix.

Please mark as solved using the check mark on the top right of the post that resolved it.
*QSI = Quick System Info from menu (Copy for Forum)
*MXPI = MX Package Installer
*Please check the solved checkbox on the post that solved it.
*Linux -This is the way!
Top
Post Reply

Return to “XFCE Desktop Environment”