Snap to panel, not allowing to go under it  [Solved]

Forum rules
Post Reply
Message
Author
User avatar
PixLab
Posts: 84
Joined: Sat Jun 20, 2020 9:47 am

Snap to panel, not allowing to go under it

#1 Post by PixLab »

Hello,

I have a little problem with the Xfce panel, when I open a window the top window goes under the panel, thus I cannot move it by dragging it, I need to use Alt+ right button to reduce the window size to be able to reach the top window to move it.
ksnip_20250115-123331.png
Where can I find how to stop this behavior and (going under the panel) and instead snap to the bottom panel if I change the size of a window or move it like it does on the side of the screen and the bottom screen?
(my panel is at the top of the screen)
Thanks for reading

QSI

Code: Select all

System:
  Kernel: 6.1.0-29-amd64 [6.1.123-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-29-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel, plank wm: xfwm v: 4.20.0 vt: 7
    dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto Jan 12  2025 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop Mobo: ASUSTeK model: H110M-E/M.2 v: Rev X.0x serial: <superuser required>
    UEFI: American Megatrends v: 3805 date: 05/07/2018
CPU:
  Info: model: Intel Core i5-7400 bits: 64 type: MCP arch: Kaby Lake gen: core 7 level: v3
    note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x9E (158) stepping: 9
    microcode: 0xF8
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB
    L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 800 min/max: 800/3500 scaling: driver: intel_pstate governor: powersave
    cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 24000
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf mitigation: PTE Inversion
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: disabled; RSB filling;
    PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Polaris 20 XL [Radeon RX 580 2048SP] vendor: Sapphire driver: amdgpu v: kernel
    arch: GCN-4 code: Arctic Islands process: GF 14nm built: 2016-20 pcie: gen: 3 speed: 8 GT/s
    lanes: 16 ports: active: HDMI-A-1 empty: DP-1, DP-2, DVI-D-1, HDMI-A-2 bus-ID: 01:00.0
    chip-ID: 1002:6fdf class-ID: 0300 temp: 53.0 C
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X: loaded: amdgpu
    unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 509x286mm (20.04x11.26") s-diag: 584mm (22.99")
  Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: Samsung S24R35x serial: <filter> built: 2020
    res: 1920x1080 hz: 60 dpi: 94 gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 604mm (23.8")
    ratio: 16:9 modes: max: 1920x1080 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 580 2048SP (polaris10 LLVM 15.0.6 DRM
    3.49 6.1.0-29-amd64) direct-render: Yes
Audio:
  Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: ASUSTeK driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a170 class-ID: 0403
  Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] vendor: Sapphire
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.1
    chip-ID: 1002:aaf0 class-ID: 0403
  API: ALSA v: k6.1.0-29-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: off with: 1: pipewire-pulse status: off 2: wireplumber
    status: off 3: pw-jack type: plugin tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK PRIME B450M-A
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Qualcomm Atheros AR9287 Wireless Network Adapter driver: ath9k v: kernel modules: wl
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 168c:002e class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Drives:
  Local Storage: total: 2.47 TiB used: 34.18 GiB (1.3%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SDSSDA240G size: 223.57 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 30RL scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Gigabyte model: GP-GSTFS31480GNTD size: 447.13 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 61.5
    scheme: GPT
  ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Seagate model: Backup+ RD size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 0143 scheme: MBR
  ID-4: /dev/sdd maj-min: 8:48 type: USB vendor: Seagate model: Backup+ RD size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 0143
Partition:
  ID-1: / raw-size: 446.88 GiB size: 438.79 GiB (98.19%) used: 34.18 GiB (7.8%) fs: ext4
    dev: /dev/sdb2 maj-min: 8:18
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sdb1 maj-min: 8:17
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 5 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 49.0 C mobo: N/A gpu: amdgpu temp: 51.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1058
Repos:
  Packages: pm: dpkg pkgs: 2654 libs: 1448 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb https://mirrors.ocf.berkeley.edu/mx-packages/mx/repo/ bookworm main non-free
  Active apt repos in: /etc/apt/sources.list.d/vscodium.list
    1: deb [ signed-by=/usr/share/keyrings/vscodium-archive-keyring.gpg ] https://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium main
Info:
  Processes: 266 Uptime: 4h 23m wakeups: 1 Memory: 23.41 GiB used: 4.05 GiB (17.3%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
You do not have the required permissions to view the files attached to this post.
Top
User avatar
PixLab
Posts: 84
Joined: Sat Jun 20, 2020 9:47 am

Re: Snap to panel, not allowing to go under it  [Solved]

#2 Post by PixLab »

Never mind I did find out, if you move the Panel with a right click > Panel Preferences > etc..., the auto hide/snapping and other options are not taken in count :rolleyes:

You need to move the Panel from "MX Tweak" and everything will work
Top
Post Reply

Return to “XFCE Desktop Environment”