Po instalacji MX Linux obok Windows 10 system nie startuje [Solved]
Re: Po instalacji MX Linux obok Windows 10 system nie startuje
TEXT --> [code]TEXT[/code]
Re: Po instalacji MX Linux obok Windows 10 system nie startuje
Code: Select all
sudo find /mnt/sda2 -iname "*.efi" -ls
255 1344 -rwxr-xr-x 1 root root 1375752 gru 27 19:45 /mnt/sda2/EFI/Microsoft/Boot/memtest.efi
344 1540 -r wxr60 -xr-x 1 korzeń główny 1597408 gru 27 19:45 /mnt/sda2/EFI/Microsoft/Boot/bootmgfw.efi
351 157 -rwxr-xr-x 1 root root 160560 sie 16 17:51 /mnt/sda2/EFI/BootBoot/MicrosoftRecovery
352 1544 -rwxr-xr-x 1 root root 1580552 gru 27 19:45 /mnt/sda2/EFI/Microsoft/Boot/bootmgr.efi
362 87 -rwxr-xr-x 1 root root 8834 4258 gru 1956: /mnt/sda2/EFI/Boot/fbx64.efi
363 837 -rwxr-xr-x 1 korzeń główny 856280 gru 28 19:56 /mnt/sda2/EFI/Boot/mmx64.efi
364 2594 -rwxr-x 1 główny korzeń 2656136 28 grudnia 19:56 /mnt/sda2/EFI/Boot/bootx64.efi
380 789 -rwxr-xr-x 1 root root 806952 12 grudnia 2012 /mnt/sda2/EFI/HP/BiosUpdate/HpDa2/EFI/HP/BiosUpdate /HpBiofi
. -rwxr-xr-x 1 root root 781704 gru 12 2012 /mnt/sda2/EFI/HP/BiosUpdate/HpBiosUpdate32.efi
382 434 -rwxr-xr-x 1 root root 443904 lut 2012 /mnt/sda2/EFI/HP/BiosUpdate/CryptRSA.efi
383 253 -rwxr-xr-x 1 root root 259072 część 23 2012 /mnt/sda2/EFI/HP/BiosUpdate/
CryptRSA329 x 1 korzeń główny 2656136 gru 28 19:56 /mnt/sda2/EFI/ubuntu/grubx64.efi
400 945 -rwxr-xr-x 1 główny korzeń 966664 gru 28 19:56 /mnt/sdantu2/ubuntu/Efix64
401 837 -rwxr-xr-x 1 korzeń główny 856280 gru 28 19:56 /mnt/sda2/EFI/ubuntu/mmx64.efi
Re: Po instalacji MX Linux obok Windows 10 system nie startuje
Code: Select all
sudo find /boot/efi -iname "*.efi" -ls
407 136 -rw-rw-r-- 1 root root 139264 gru 28 21:55 /boot/efi/EFI/MX/grubx64.efi
410 136 -rw-rw-r-- 1 root root 139264 gru
29 11:01 /boot/efi/EFI/BOOT/BOOTX64.EFI 413 136 -rw-rw-r-- 1 root root 139264 gru 29 11:01 /boot/efi/EFI/MX23/grubx64.efi
Szczyt
Re: Po instalacji MX Linux obok Windows 10 system nie startuje
Witam. Miałem podobny problem. O ile pamięć mnie nie myli u mnie się okazało że w opcjach BOOT płyty głównej musiałem wybrać odpowiedni bootloader MXLinuxa, a nie Windowsa czy tam innej dystrybucji Linuxa, wtedy GRUB działał jak należy I MXLinux mi startował. Poprostu miałem chyba wtedy mało doświadczenia z biosem UEFI bo wiekszość spędziłem na klasycznym.
Re: Po instalacji MX Linux obok Windows 10 system nie startuje
QSI -> "Quick System Info"
Code: Select all
quick-system-info-gui
Re: Po instalacji MX Linux obok Windows 10 system nie startuje
Code: Select all
System:
Kernel: 6.1.0-25-amd64 [6.1.106-3] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64 root=UUID=<filter> ro quiet splash
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23.4_KDE_x64 Libretto
September 15 2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: Hewlett-Packard product: HP EliteBook 2570p v: A1029D1102
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: Hewlett-Packard model: 17DF v: KBC Version 61.26 serial: <superuser required>
UEFI: Hewlett-Packard v: 68ISB Ver. F.73 date: 04/12/2019
Battery:
ID-1: BAT0 charge: 25.0 Wh (53.5%) condition: 46.7/46.7 Wh (100.0%) volts: 11.0 min: 10.8
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: discharging
CPU:
Info: model: Intel Core i5-3340M bits: 64 type: MT MCP arch: Ivy Bridge gen: core 3 level: v2
built: 2012-15 process: Intel 22nm family: 6 model-id: 0x3A (58) stepping: 9 microcode: 0x21
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1359 high: 1641 min/max: 1200/3400 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 1641 2: 1198 3: 1400 4: 1199 bogomips: 21551
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: conditional; RSB
filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel 3rd Gen Core processor Graphics vendor: Hewlett-Packard driver: i915 v: kernel
arch: Gen-7 process: Intel 22nm built: 2012-13 ports: active: LVDS-1 empty: DP-1, DP-2,
HDMI-A-1, HDMI-A-2, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0166 class-ID: 0300
Device-2: Chicony HP HD Webcam [Fixed] type: USB driver: uvcvideo bus-ID: 1-1.3:3
chip-ID: 04f2:b2f5 class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31")
Monitor-1: LVDS-1 model: Seiko Epson 0x4149 built: 2011 res: 1366x768 hz: 60 dpi: 119
gamma: 1.2 size: 292x174mm (11.5x6.85") diag: 328mm (12.9") ratio: 15:9, 16:9 modes: 1366x768
API: OpenGL v: 4.2 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel HD Graphics 4000 (IVB GT2)
direct-render: Yes
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Hewlett-Packard 7
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
API: ALSA v: k6.1.0-25-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82579LM Gigabit Network vendor: Hewlett-Packard driver: e1000e v: kernel
port: 4060 bus-ID: 00:19.0 chip-ID: 8086:1502 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi v: kernel modules: wl
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 24:00.0 chip-ID: 8086:0082 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Broadcom HP Portable SoftSailing type: USB driver: btusb v: 0.8 bus-ID: 2-1.6:3
chip-ID: 0a5c:21e1 class-ID: fe01 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 220e hci-v: 4.0 rev: 1000
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 111.79 GiB used: 11.1 GiB (9.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: GOODRAM model: SSDPR-CL100-120 size: 111.79 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 7C scheme: GPT
Partition:
ID-1: / raw-size: 19.1 GiB size: 18.63 GiB (97.55%) used: 11.06 GiB (59.3%) fs: ext4
dev: /dev/sda6 maj-min: 8:6
ID-2: /boot/efi raw-size: 500 MiB size: 499 MiB (99.80%) used: 428 KiB (0.1%) fs: vfat
dev: /dev/sda5 maj-min: 8:5
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 51.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2496 libs: 1337 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.icm.edu.pl/pub/Linux/dist/antix-workspace/mx/repo/ bookworm main non-free
2: deb http://ftp.icm.edu.pl/pub/Linux/dist/antix-workspace/mx/repo/ bookworm ahs
Info:
Processes: 214 Uptime: 40m wakeups: 3 Memory: 7.62 GiB used: 2.98 GiB (39.1%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: Po instalacji MX Linux obok Windows 10 system nie startuje [Solved]
OK: sda2/"EFI System Partition" -- "ubuntu" ††zai3en wrote: Sun Dec 29, 2024 1:56 pmCode: Select all
399 2594 -rwxr-xr-x 1 root root 2656136 gru 28 19:56 /mnt/sda2/EFI/ubuntu/grubx64.efi 400 945 -rwxr-xr-x 1 root root 966664 gru 28 19:56 /mnt/sda2/EFI/ubuntu/shimx64.efi 401 837 -rwxr-xr-x 1 root root 856280 gru 28 19:56 /mnt/sda2/EFI/ubuntu/mmx64.efi 362 87 -rwxr-xr-x 1 root root 88344 gru 28 19:56 /mnt/sda2/EFI/Boot/fbx64.efi 363 837 -rwxr-xr-x 1 root root 856280 gru 28 19:56 /mnt/sda2/EFI/Boot/mmx64.efi 364 2594 -rwxr-xr-x 1 root root 2656136 gru 28 19:56 /mnt/sda2/EFI/Boot/bootx64.efi
Code: Select all
sudo rm -r /mnt/sda2/EFI/ubuntu/
Code: Select all
sudo rm /mnt/sda2/EFI/Boot/fbx64.efi
sudo rm /mnt/sda2/EFI/Boot/mmx64.efi
Code: Select all
sudo grub-install --bootloader-id "MX23" --efi-directory /mnt/sda2 --force-extra-removable --recheck
Re: Po instalacji MX Linux obok Windows 10 system nie startuje
OK, działa. Sam bym w życiu do tego nie doszedł. No niestety, jak się okazuje, bez konsoli nie da rady. Wielkie dzięki za szybką i kompetentną pomoc !
Re: Po instalacji MX Linux obok Windows 10 system nie startuje
Perhaps next time use DeepL to translate in English (or to German)zai3en wrote: Sun Dec 29, 2024 3:07 pm OK, działa. Sam bym w życiu do tego nie doszedł. No niestety, jak się okazuje, bez konsoli nie da rady. Wielkie dzięki za szybką i kompetentną pomoc !
B/c I do not speak Polish, and do not want to translate my wrongly written English or German into Polish,
which may create confusion,
https://www.deepl.com/en/translator:
Może następnym razem użyj DeepL do przetłumaczenia na angielski (lub niemiecki)
B/c nie mówię po polsku i nie chcę tłumaczyć mojego błędnie napisanego angielskiego lub niemieckiego na polski,
co może wprowadzić zamieszanie,