Nemo in inglese!  [Solved]

Forum italiano degli utenti MX
Message
Author
User avatar
asthara
Posts: 139
Joined: Fri Oct 28, 2022 12:17 pm

Nemo in inglese!  [Solved]

#1 Post by asthara »

Code: Select all

Snapshot created on: 20240911_2354
System:
  Kernel: 6.1.0-25-amd64 [6.1.106-3] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-amd64 root=UUID=<filter> ro quiet
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.3_x64 Libretto May 19  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Hewlett-Packard product: HP ProDesk 600 G1 SFF v: N/A
    serial: <superuser required> Chassis: type: 4 serial: <superuser required>
  Mobo: Hewlett-Packard model: 18E7 serial: <superuser required> UEFI: Hewlett-Packard
    v: L01 v02.57 date: 12/11/2014
CPU:
  Info: model: Intel Core i5-4570 bits: 64 type: MCP arch: Haswell gen: core 4 level: v3
    note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x3C (60) stepping: 3
    microcode: 0x28
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB
    L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 1875 high: 1966 min/max: 800/3600 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 1796 2: 1966 3: 1810 4: 1929 bogomips: 25540
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf mitigation: PTE Inversion
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: disabled; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics
    vendor: Hewlett-Packard driver: i915 v: kernel arch: Gen-7.5 process: Intel 22nm built: 2013
    ports: active: HDMI-A-1 empty: DP-1, DP-2, HDMI-A-2, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0412
    class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Samsung SyncMaster serial: <filter> built: 2010
    res: 1920x1080 hz: 60 dpi: 81 gamma: 1.2 size: 604x342mm (23.78x13.46") diag: 694mm (27.3")
    ratio: 16:9 modes: max: 1920x1080 min: 640x480
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 4600 (HSW GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c class-ID: 0403
  Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: Hewlett-Packard 8
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20 class-ID: 0403
  API: ALSA v: k6.1.0-25-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I217-LM vendor: Hewlett-Packard driver: e1000e v: kernel port: f080
    bus-ID: 00:19.0 chip-ID: 8086:153a class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Realtek 802.11ac WLAN Adapter type: USB driver: rtl8852bu bus-ID: 1-7:2
    chip-ID: 0bda:b832 class-ID: 0000 serial: <filter>
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
    bus-ID: 1-12:4 chip-ID: 0a12:0001 class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.0
    sub-v: 2312 hci-v: 5.0 rev: 810
  Info: acl-mtu: 679:8 sco-mtu: 48:16 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 1.36 TiB used: 819.3 GiB (58.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Toshiba model: DT01ACA100 size: 931.51 GiB block-size:
    physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: A750
    scheme: MBR
Partition:
  ID-1: / raw-size: 150 GiB size: 146.59 GiB (97.72%) used: 31.4 GiB (21.4%) fs: ext4
    dev: /dev/sda6 maj-min: 8:6
  ID-2: /boot/efi raw-size: 500 MiB size: 499 MiB (99.80%) used: 288 KiB (0.1%) fs: vfat
    dev: /dev/sda4 maj-min: 8:4
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda5
    maj-min: 8:5
Sensors:
  System Temperatures: cpu: 36.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: 2833 pm: dpkg pkgs: 2822 libs: 1549
    tools: apt,apt-get,aptitude,gnome-software,nala,synaptic pm: rpm pkgs: 0 pm: flatpak pkgs: 11
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/megasync.list
    1: deb [signed-by=/usr/share/keyrings/meganz-archive-keyring.gpg] https://mega.nz/linux/repo/Debian_12/ ./
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://it.mxrepo.com/mx/repo/ bookworm main non-free
Info:
  Processes: 251 Uptime: 2h 17m wakeups: 1 Memory: 15.53 GiB used: 3.62 GiB (23.3%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
ciao ragazzi, ho installato Nemo come file manager alternativo a thunar in mx-linux xfce....ma...è in iinglese e non vuole cambiare lingua!!! Come fare?

User avatar
j2mcgreg
Global Moderator
Posts: 6606
Joined: Tue Oct 23, 2007 12:04 pm

Re: Nemo in inglese!

#2 Post by j2mcgreg »

Questo è solo un suggerimento. Nemo è il file manager predefinito per Cinnamon DE in Mint e uno dei nostri membri ha creato un respin di Cinnamon su MX che potrebbe funzionare meglio per te rispetto al semplice tentativo di importare Nemo da solo. Puoi trovare le informazioni su questo respin qui:
viewtopic.php?t=72338
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.

User avatar
asthara
Posts: 139
Joined: Fri Oct 28, 2022 12:17 pm

Re: Nemo in inglese!

#3 Post by asthara »

ma non ti sembra esagerato che per cambiare solo la lingua a Nemo io debba reinstallare un intero sistema??? :-D

User avatar
asthara
Posts: 139
Joined: Fri Oct 28, 2022 12:17 pm

Re: Nemo in inglese!

#4 Post by asthara »

Ragazzi, ci sono riuscito!!! :-D
Ho installato il pacchetto "cinnamon-l10n" , riavviato e Nemo è in italiano! ;-)

User avatar
Eadwine Rose
Administrator
Posts: 14462
Joined: Wed Jul 12, 2006 2:10 am

Re: Nemo in inglese!

#5 Post by Eadwine Rose »

Ottimo! Sono contento che tu abbia risolto :)
MX-23.6_x64 July 31 2023 * 6.1.0-34amd64 ext4 Xfce 4.20.0 * 8-core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 535.216.01 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 870EVO * Samsung S24D330 & P2250 * HP Envy 5030

Post Reply

Return to “Forum Italiano”