Anyway, I can't seem to find a way to edit the Whisker menu. I tried MenuLibre but that only lists one MX Tools anyway.
It's not a big deal, but I mention just in case this is the way it's been put out.
Code: Select all
Snapshot created on: 20240723_2035
System: Kernel: 5.10.0-31-amd64 [5.10.221-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-31-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower October 20 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: Dell product: OptiPlex 7020 v: 00 serial: <filter> Chassis:
type: 15 serial: <filter>
Mobo: Dell model: 02YYK5 v: A00 serial: <filter> BIOS: Dell v: A18 date: 05/30/2019
CPU: Info: Quad Core model: Intel Core i5-4590 bits: 64 type: MCP arch: Haswell family: 6
model-id: 3C (60) stepping: 3 microcode: 28 cache: L2: 6 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 26339
Speed: 898 MHz min/max: 800/3300 MHz Core speeds (MHz): 1: 898 2: 898 3: 898 4: 898
Vulnerabilities: Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: disabled,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics vendor: Dell
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:0412 class-ID: 0300
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver:
loaded: modesetting unloaded: fbdev,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: VGA-1 res: 1920x1080 dpi: 82 size: 598x336mm (23.5x13.2") diag: 686mm (27")
OpenGL: renderer: Mesa DRI Intel HD Graphics 4600 (HSW GT2) v: 4.5 Mesa 20.3.5
compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: Dell
driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c class-ID: 0403
Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20 class-ID: 0403
Sound Server-1: ALSA v: k5.10.0-31-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Sound Server-3: PipeWire v: 0.3.19 running: no
Network: Device-1: Intel Ethernet I217-LM vendor: Dell driver: e1000e v: kernel port: f080
bus-ID: 00:19.0 chip-ID: 8086:153a class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Huawei Broadband stick type: USB driver: cdc_ether,option,option1,usb-storage
bus-ID: 2-8:5 chip-ID: 12d1:1436 class-ID: 0806
IF: wwan0 state: down mac: <filter>
IF-ID-1: ipv6leakintrf0 state: unknown speed: N/A duplex: N/A mac: <filter>
IF-ID-2: ppp0 state: unknown speed: N/A duplex: N/A mac: N/A
IF-ID-3: proton0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Drives: Local Storage: total: 468.81 GiB used: 410.78 GiB (87.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: DT01ACA050 size: 465.76 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200
serial: <filter> rev: A7S0 scheme: MBR
ID-2: /dev/sdc maj-min: 8:32 type: USB model: Kindle Internal Storage size: 3.04 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 0100
scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw-size: 457.75 GiB size: 449.5 GiB (98.20%) used: 409.56 GiB (91.1%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
maj-min: 8:2
Sensors: System Temperatures: cpu: 29.8 C mobo: 27.8 C
Fan Speeds (RPM): N/A
Repos: Packages: 2703 note: see --pkg apt: 2689 lib: 1422 flatpak: 14
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/atom.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
Active apt repos in: /etc/apt/sources.list.d/protonvpn-stable.list
1: deb [arch="all", signed-by=/usr/share/keyrings/protonvpn-stable-archive-keyring.gpg] https://repo.protonvpn.com/debian stable main
Active apt repos in: /etc/apt/sources.list.d/vivaldi.list
1: deb [arch=amd64] https://repo.vivaldi.com/stable/deb/ stable main
Info: Processes: 241 Uptime: 1h 35m wakeups: 10 Memory: 7.67 GiB used: 3 GiB (39.1%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: BIOS (legacy, CSM, MBR)
